Professional Documents
Culture Documents
DGX-660B DGX-660WH
■CONTENTS
SPECIFICATIONS...................................................................... 3
PANEL LAYOUT......................................................................... 6
CIRCUIT BOARD LAYOUT&WIRING......................................... 8
BLOCK DIAGRAM.................................................................... 10
DISASSEMBLY PROCEDURE................................................. 11
CIRCUIT BOARDS................................................................... 22
DM CIRCUIT BOARD TEST METHOD.................................... 31
TEST PROGRAM..................................................................... 32
BACKUP................................................................................... 37
INITIALIZATION........................................................................ 37
SYSTEM BOOTING FLOW CHART......................................... 38
PARTS LIST (DGX-650B/DGX-650WH)
OVERALL CIRCUIT DIAGRAM
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that
basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the
users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components and failure of the product to perform as specified. For
these reasons, we advise all Yamaha product owners that all service required should be performed by an
authorized Yamaha Retailer or the appointed service representative.
IMPORTANT: This presentation or sale of this manual to any individual or firm does not constitute authorization certifi-
cation, recognition of any applicable technical capabilities, or establish a principal-agent relationship of
any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and
service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to
this bus.)
IMPORTANT: Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to
the unit.
WARNING: This product contains chemicals known to the State of California to cause cancer, or birth defects or other
reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY
REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/ flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
SAVING DATA
Saving and backing up your data
Some data items are automatically saved as backup data in the internal memory even if you turn the power off.
Saved data may be lost due to malfunction or incorrect operation. Save important data to a USB storage device/or other external
device such as a computer.
2
Specifications DGX-660B/DGX-660WH
■■SPECIFICATIONS
Product Name Digital Piano
1,397 x 445 x 146 mm (55” x 17-1/2” x 5-3/4”)
Dimensions (W x D x H) with keyboard stand: 1,399 x 445 x 761 mm (55-1/16” x
Size/Weight 17-1/2” x 29-15/16”)
21kg (46 lbs. 5 oz.)
Weight
with keyboard stand: 28kg (61 lbs. 12 oz.)
Number of Keys 88
Keyboard Type GHS (Graded Hammer Standard) keyboard
Touch Response Soft, Medium, Hard, Fixed
Other Controllers Pitch Bend Wheel Yes
Type Full Dot LCD
Control Size 320 x 240 dots
Interface Color Monochrome
Display Contrast Yes
Score Display Function Yes
Lyrics Display Function Yes
Language English
Panel Language English
Piano Sound Pure CF Sound Engine
Tone Generation
Damper Resonance Yes
Number of Polyphony
Polyphony 192
(max.)
Voices
Number of Voices 151 + 15 Drum/SFX Kits + 388 XGlite
Preset 1 Natural! Voice, 10 Live! Voices, 11 Sweet! Voices, 7 Cool!
Featured Voices
Voices
Compatibility GM, XGlite
Reverb 41 types
Chorus 44 types
DSP 237 types
Types Master EQ 5 types
Harmony 26 types
Effects Intelligent Acoustic Control
Yes
(IAC)
Mic Effects Noise Gate, Compressor, 3 Band EQ
Dual Yes
Functions Split Yes
Panel Sustain Yes (Function Menu)
Number of Styles 205
Preset Fingering Multi Finger, Full Keyboard, AI Fingered
Style Control INTRO, MAIN x 2, FILL-IN x 2, ENDING
Music Database 320
Styles
One Touch Setting (OTS) Yes
Other Features
Style Recommender Yes
Smart Chord Yes
Compatibility Style File Format (SFF), Style File Format GE (SFF GE)
Preset Number of Preset Songs 100
Number of Songs 5
Recording Number of Tracks 6 (5 Melody + 1 Chord)
Songs (MIDI)
Data Capacity Approx. 30,000 notes for 1 user song
Compatible Data Playback SMF (Format 0, Format 1), XF
Format Recording SMF (Format 0)
Recording Time (max.) 80 minutes/Song
USB Audio
Playback WAV (44.1 kHz, 16 bit, stereo)
Recorder/Player Data Format
Recording WAV (44.1 kHz, 16 bit, stereo)
Registration
Number of Buttons 4 (x 8 banks)
Memory
Yamaha Education Suite Waiting, Your tempo, Minus one, Repeat & Learn, Chord
Lesson
(Y.E.S.) Dictionary
Demo Yes
Functions
Metronome Yes
Tempo 5 - 280
Overall Controls
Transpose -12 to 0, 0 to +12
Tuning 415.3 – 440.0 – 466.2 Hz
Miscellaneous Piano Room Yes
4
DGX-660B/DGX-660WH
5
Panel Controls and Terminals
DGX-660B/DGX-660WH
■■PANEL LAYOUT
Front Panel
Song category list Style category list
e r t y
q u
w
i o !0
!3
!4
!1 !2
Front Panel
q [ ] (Standby/On) switch..................... page 18 !4 STYLE
w [MASTER VOLUME] control ................ page 19 [ACMP ON/OFF] button.................... page 32
e [DEMO/BGM] button .................... pages 38, 66 [INTRO/ENDING/rit.] button ............. page 61
r [SCORE] button....................................page 41 [MAIN/AUTO FILL] button ................ page 61
t [LYRICS] button....................................page 41 [SYNC STOP] button ........................ page 62
y [REC] button ........................... pages 44, 46, 49 [SYNC START] button....................... page 33
u LESSON START [START/STOP] button....................... page 33
[WAITING] button..............................page 43 !5 REGIST MEMORY
[YOUR TEMPO] button .....................page 43 [BANK], [1]–[4] buttons.................... page 50
[MINUS ONE] button.........................page 43 !6 CATEGORY [r] and [f] buttons ....... page 24
i [SMART CHORD] button......................page 35 !7 [EXIT] button ........................................ page 23
o [MIC SETTING] button .........................page 69 !8 [EXECUTE] button ............................... page 82
!0 Song Track !9 DATA ENTRY
[1]–[5], [A] buttons............................page 40 Dial, Number buttons [0]–[9],
Lesson [+] and [-] buttons............................. page 24
[R] and [L] buttons ...........................page 42 @0 [FILE CONTROL] button...................... page 82
!1 [METRONOME ON/OFF] button ..........page 29 @1 [FUNCTION] button.............................. page 72
!2 [TEMPO/TAP] button.................... pages 63, 67 @2 [PIANO ROOM] button......................... page 25
!3 SONG/AUDIO @3 [SONG/AUDIO] button ......................... page 39
[REPEAT&LEARN] button................page 43 @4 [STYLE] button..................................... page 32
[A-B REPEAT] button........................page 40 @5 [VOICE] button ..................................... page 27
[REW] button.....................................page 40 @6 [MUSIC DATABASE] button................. page 33
[FF] button.........................................page 40 @7 [SPLIT ON/OFF] button ....................... page 28
[PAUSE] button .................................page 40 @8 [DUAL ON/OFF] button ........................ page 28
[START/STOP] button .......................page 39 @9 [HARMONY ON/OFF] button ............... page 31
#0 [PITCH BEND] wheel ........................... page 56
#1 USB TO DEVICE terminal ...... pages 77, 80, 81
6
DGX-660B/DGX-660WH
Panel Controls and Terminals
!9
!6
@0 #1
!7 !8
@1
@2 @3 @4 @5
@6
!5
@7 @8 @9
#0
A-1 C0 C1 C2 C3 C4 C5 C6 C7
Rear Panel
#2 #3 #4 #5 #6 #7 #8 #9 $0
Rear Panel
#2 CONTRAST knob .................................page 23 #9 MIC INPUT jack .................................... page 69
#3 USB TO HOST terminal.......... pages 74, 76, 77 $0 DC IN jack ............................................. page 18
#4 SUSTAIN jack .......................................page 21
#5 PEDAL UNIT jack .................................page 22
“Press & Hold” symbol
#6 PHONES/OUTPUT jack ........................page 20 By holding down one of the buttons having this sym-
#7 AUX IN jack........................................... page 76 bol, you can call up an alternate function, other than
#8 MIC VOLUME knob ..............................page 69 the one called up when simply pressing.
7
DGX-660B/DGX-660WH
PB MVR PNL AJACK LCD unit MKO ENC PNR Keyboard assembly
690 DM
AJACK DJACK
• Bottom board
Speaker Speaker
(Woofer (L)) S60 (Woofer (R))
8
DGX-660B/DGX-660WH
L1 WU967500 LCD UNIT LCD ASSEMBLY-10 DM-CN002 FFC cable has installed to LCD unit.
The parts with "( )" in "Part No." are not available as service parts.
9
10
LCD
320x240
PNL LED PNR LED ENC STN
ENC_A,
SW Matrix SW Matrix ENC_B
(SW1-7,9-15,17-23,25-31) (SW33-37,41-47,49-55,57-63)
CN3(3P)
LED Back Light
CN901(3P)
EC1
(LD1-3) (LD4)
DATA ENTRY
CN1(12P) CN2(15P)
+5A
DM +5D AJACK
IC013 IC009(14P) DC/DC TH1
PA[0-3]
PA[4-7] +VEE1 5 IC008 6
(8P) /MUTE-RES
+VEE2
+3.3D /LCD-OFF (8P) POLY-SWTCH
/LCD-OFF
ENC_A, ENC_B
/ADC-IC
IC024 /MUTE-RES
(5P) /FLASH-RES
DGX-660B/DGX-660WH
/FLASH-RES
RESET 14 14
HP-IN
X003 128M 64M 256M 64M
+1.2D +3.3D 16.9344 MHz
SDRAM FLASH ROM FLASH ROM SDRAM
/CPU-RES
FPFRAME, FPLINE,
FPSHIFT, MOD
FPDAT[0-3]
x2 PROGRAM WAVE DSP
D7
A13
A14
AA5
SW-IN[0-6] IC026,027 IC007 IC028 IC031 LCD DRIVER L
U3,U4,V1,V2,
AA6,AB6
TR001-004 V3,V4,W1 (54P) (56P) (56P) (54P) IC006
PA[0-7] (64P) 39 SYSCLK2
CN419(2P)
A20,B19,A19,D18, +3.3D
■■BLOCK DIAGRAM
CN012(4P)
CN415(4P)
CN418(5P)
C4
B9,A9,C9
B11,A11
D11,C11
AA4,AB4,
W5,Y5
T2
T3
Y16
W17
Y18
AB17
AA18
AB18
AA19
Y19
5 21 (33P) 11,15,27,31 +B
/MUTE R
+3.3A +HP
IC401
BCLK
SDO1
SDO0
SCL
SDA
/EIC
WCLK
L
SYSCLK
7 6 HP Amp HP-L
DAC 1 +HP
8 LPF
9
IC015 16 R
+5D (16P) HP Amp /HP-R
ERR-DETECT
16 15 8 10
SDI1 +5A
2 +3.3D +5A TR403
DAMP_Make1,
DAMP_Make2,
SOSTE,SOFT
5,20,21 X001 SDI0 Ripple
IC501 3 10MHz IC034(8P) 15 IC001(8P) +3.3D +HP Filter
(44P) 1 7 7,1 5,3
POWER-ENB,/OVER-CURRENT
/MUTE-INV 11 ADC TR402
E-GKS 3 5 IC016 1,2 AUXIN-L, AUXIN-R TR405
/SPOFF-INV 10
7,9-14, 12 (20P) TR401 +B
23-32, 17-19,22, 7
/MUTE
37,38 33-36
TR401 +5A
/ACD-IC +5A DC/DC
+3.3D +5A +5D IC020
(9P)
CN013(2P)
CN422(2P)
15 IC403(8P) IC019(5P)
ADC 7,1 5,3 +3.3A
11 REGULATOR
IC402 1,2 MIC_OUT +3.3D
10 +3.3V
B[1-15]
+5D (20P)
12 7 IC017(5P)
N[11-16, 21-26]
REGULATOR +5A
USB /ACD-IC +1.2D HP-L, HP-R PWR
+1.2V HP-L, HP-R
3, HIGH-SIDE VBUS HP-IN HPIN
4 5
POWER SW AUXIN-IN AUXIN-IN
IC002 (5P) AUXIN-L
HOST-DP,HOST-DM AUXIN-R
FUNC-DP,FUNC-DM,VBUS MASTER-VOL
PITCH_BEND
CN101(2P)
CN903(2P)
CN008(18P)
CN402(18P)
VCON
PD_IN
N[21-26]
CN403(4P)
CN902(4P)
VBUS
VCON-IN
SUSTAIN
B[01-15]
FUNC-DP,
FUNC-DM,
VR603
D+,D-,VBUS
CN2(27P)
CN401(3P)
CN103(3P)
USB USB
SUSTAIN CONTRAST CN601(3P) FT1
TO HOST TO DEVICE
DC-IN
12V
CN1(17P)
CN1(17P)
CN3(17P)
CN1(17P)
(Option)
AC adaptor
(A-1~C2) (C#2~C5) (C#5~C7) +9A +9V PA-150/PA-150A/
CN407(4P)
CN408(4P)
FZ1
TR302
JK601 VR601 JK306 JK201
■■DISASSEMBLY PROCEDURE
CAUTION:
1) Flat cable’s contacts are visible from the back.
Pay attention not to insert and install the cable to the
connector inversely.
2) Be sure to attach the removed filament tape just as it was
before removal. Front Side (Printed Side) Back side
1. Bottom Board Assembly * When the lower case L is assembled, tighten the screws
(Time required: About 8 minutes) marked [940B] in the order of 1, 2, 3 and 4. (Fig.1)
1-1 Remove the five (5) screws marked [940A]. The lower * When the lower case R is assembled, tighten the screws
case F can then be removed. (Fig.1) marked [940C] in the order of 1, 2, 3 and 4. (Fig.1)
1-2 Remove the four (4) screws marked [940B] and the
guide screw marked [950A]. The lower case L can then
be removed. (Fig.1)
1-3 Remove the four (4) screws marked [940C] and the
guide screw marked [950B]. The lower case R can then
be removed. (Fig.1)
1-4 Remove the thirty (30) screws marked [940D]. The
bottom board assembly can then be separated from the
upper case assembly. (Fig.1)
4 4
1 1
3 3
2 2
Fig.1
11
DGX-660B/DGX-660WH
[60B]
[60A]
1
[900K]
2
PB Upper Case Assembly
1 2
1 1 2
[900I]
A A 2 DM B 2 1
2
1 2 1
Bracket
A 1 2
Fig.2
12
DGX-660B/DGX-660WH
Circuit Board and Assembly Screw Ref.No. / Part Name QTY Fig.
DM Circuit Board 900A (*1) 4 2
AJACK Circuit Board 900B (*1) (*2) 7 2
900C 2 2
DJACK Circuit Board 900D (*1) 2 2
USB Circuit Board 900E (*4) 3 2
PNR Circuit Board & (*3) 900F (*1) 7 2
ENC Circuit Board 900G (*1) (*6) 3 2
Encoder Knob (*8) 1 2-3
MKO Circuit Board (*5) 900H 2 2
PWR Circuit Board 900I (*1) 2 2
Push Knob (*7) 1 2-2
MVR Circuit Board 900J (*1) 3 2
Volume Knob (*9) 1 2-4
PB Circuit Board 900K (*1) 2 2
Wheel Assembly
Speaker (Tweeter) (L) 900L 2 2
Speaker (Tweeter) (R) 900M 2 2
PEDAL Circuit Board 910A 1 2
Key Block L 60A 6 2
Key Block R 60B 6 2
*1 When assembling it, tighten the screw marked 1, 2 and other screws in this order. (Fig.2)
*2 As for the screw at the location of A, it is thghtened together with a cord holder. (Fig.2)
*3 The PNR and the ENC circuit boards are connected with a board-in connector. (Fig.2)
*4 As for the three (3) screws, they are tightened together with a bracket. (Fig.2)
*5 The MKO circuit board is used as a flat cable holder. (Fig.2)
*6 As for the screw at the location of B, it is thghtened together with a cord holder. (Fig.2)
*7 Push Knob (See Fig.2-2.)
*8 Encoder Knob (See Fig.2-3.)
*9 Volume Knob (See Fig.2-4.)
Table 1
*7 *8 *9
Push Knob
Encoder Knob Volume Knob
Cloth
PWR
Cloth
13
DGX-660B/DGX-660WH
2 1
Fig.3
1 2
Fig.4
14
DGX-660B/DGX-660WH
Fig.5
< Bottom view >
Reinforcing Plate [930A] GHL Keyboard Assembly
[930B] [930B]
3 1 2
2 1
Fig.6
15
DGX-660B/DGX-660WH
7. Disassembling the Keyboard Assembly 7-3 When removing the C7 key, remove a screw marked
7-1 White key assembly and black key assem- [270C] and then lift the back of C7 key and slide it
bly towards you. (Fig.7)
Remove the four (4) screws marked [270A] fixing a * When removing white key assembly and black key assembly,
black key assembly and two (2) white key assemblies for be careful not to allow grease to attach to the circuit board
one octave (C-B). and rubber contacts, etc. (Fig.8)
To remove the black and white key assemblies for one
octave, grip and lift the both end lugs of white key, and
then slide the black and white key assemblies toward
you. (Fig.7, Fig.8)
7-2 When removing white keys numbered as A-1 and B-1
key and black key numbered as A#-1, remove two (2)
screws marked [270B] and then lift the back of the keys
and slide the black and white keys towards you. (Fig.7)
One octave One octave One octave One octave One octave One octave One octave
A-1 Key (C0-B0) (C1-B1) (C2-B2) (C3-B3) (C4-B4) (C5-B5) (C6-B6) C7 Key
Actuate Rubber
Grease
GHL88M
End lug of white key
Fig.8 Fig.9
16
DGX-660B/DGX-660WH
Rubber Contact Rubber Contact Rubber Contact Rubber Contact Rubber Contact
One octave
One octave
(C#-C)
(C#-C)
Frame
7-7 GHL88M Circuit Board 7-9 Hammer (White Key), (Black Key)
Remove the black and white key assembly (C2-B5). Remove the black and white key assembly for the related
(See procedure 7-1.) keys.
Remove the seven (7) screws marked [260B]. The With the key frame placed upside down, push the
GHL88M circuit board can then be removed. (Fig.10) hammer forward from the rear, then a click sound is
Detach the filament tape and disconnect the FFC cable. heard and the hammer bearing section can be removed
(Fig.12) from the hammer axis of the key frame.
7-8 GHL88H Circuit Board Take out the hammer sideways. (Fig.13, Fig.14)
Remove the black and white key assembly (C5-C7). Note: When removing the hammer, use care not to cause damage to
(See procedure 7-1.) the hammer bearing and its claw.
Remove the five (5) screws marked [260C]. The
GHL88H circuit board can then be removed. (Fig.10)
< Rear View > Bearing Claw
Hammer Axis
Bearing Claw
Frame
Push
Fig.13 Fig.14
Apply grease.
Hammer Axis
Part Name Range for Applicable Tone Keys
Hammer, White Key
Hammer, Black Key Hammer W1 A-1 - F1
Bottom Side
Hammer W2 G1 - E3
White Key
Hammer W3 F3 - D5
Hammer W4 E5 - C7
Photo.1 Photo.2
Photo.3 Photo.4
19
DGX-660B/DGX-660WH
8-5 Rubber Contact 8-7 White key assembly and black key assembly
Note that the rubber contact has s specific installation After applying grease to the key guide, install the white
direction. Be careful not to install it in the wrong key assembly/black key assembly.
direction. At this time, check to make sure that the key guide of the
Note: A triangle mark (r) on the rubber contact must face the key frame and inside slit at the front of white key as well
front. (Fig.16) as the contact arm of the hammer and actuate rubber of
To prevent looseness of the rubber contact, fit it securely the white key assembly/black key assembly are installed
in place using a clip or similar object. (Fig.17) properly. (Fig.19)
Use the four (4) screws marked [270A] to fix 1 octave
8-6 Actuate Rubber white key assembly/black key assembly. (Fig.7)
After applying grease(G-1030Y) to top and bottom faces 8-8 Use the two (2) screws marked [270B] to fix the A-1 to
of the actuate rubber, fit it to the white key (black key). B-1 keys. (Fig.7)
(Fig.18) 8-9 Use a screw marked [270C] to fix the C7 key. (Fig.7)
Fig.17
Fig.16
Actuate Rubber
Apply grease.
Fig.18
20
DGX-660B/DGX-660WH
Apply grease.
Hammer
Key Guide
Contact Arm
Fig.19
21
DGX-660B/DGX-660WH
■■CIRCUIT BOARDS
CONTENTS
● AJACK Circuit Board (YH202C0)................................................................................... 24
Note: See parts list for details of circuit board component parts.
22
DGX-660B/DGX-660WH
●
DM Circuit Board
to DJACK-CN410 to AJACK-CN402 to AJACK-CN601 to AJACK-CN422
to PEDAL-CN701 to GHL88M-CN2 to LCD Unit to AJACK-CN415
to PNR-CN2 to PNL-CN1
• When 48P-TSOP is mounted to the location of IC007, its pin no.1 must be positioned to the pin no.3 of 56P-TSOP.
Pattern Side
2NA-ZT15330 1
23
DGX-660B/DGX-660WH
●
AJACK Circuit Board
to Tweeter(L) to Tweeter(R)
to DM-CN013
to MVR-CN902
to DM-CN008
to PWR-CN903
to PB-CN401
MIC IN AUX IN
PHONES/OUTPUT
to DM-CN601
DC IN
Component Side
●
DJACK Circuit Board ●
USB Circuit Board
to DM-CN10
Component Side
to DM-CN009 to DM-CN10
24
DGX-660B/DGX-660WH
●
MVR Circuit Board ●
PWR Circuit Board
to AJACK-CN101
to AJACK-CN403
Component Side
Component Side
●
PB Circuit Board ●
PEDAL Circuit Board
to AJACK-CN103
PEDAL UNIT
Component Side
to DM-CN007
Component Side
PWR : 2NA-ZR99480
PEDAL : 2NA-ZR99480
MVR : 2NA-ZR99480
PB : 2NA-ZR17520 2
25
DGX-660B/DGX-660WH
●
PNL Circuit Board
A
to DM-CN005
to DM-CN005
A’
A’
A
Component Side
A’
2NA-ZR99480
26
A’
DGX-660B/DGX-660WH
●
PNR Circuit Board
to DM-CN006
Component Side
PNR : 2NA-ZR99480
27
DGX-660B/DGX-660WH
●
GHL88H Circuit Board
Component Side
F'
F
to GHL88M-CN3
F'
F
2NAK8-WF46250
28
DGX-660B/DGX-660WH
●
GHL88L Circuit Board
Component Side
D'
D
D'
D
to GHL88M-CN1
2NAK8-WF46230
29
30
●
E
to GHL88H-CN1 to DM-CN001
DGX-660B/DGX-660WH
E'
E
to GHL88L-CN1
2NAK8-WF46240 2
DGX-660B/DGX-660WH
5 4 3 2 1
Component Side
31
DGX-660B/DGX-660WH
■■TEST PROGRAM
* If you execute the test No.55 (Factory Set), then the user’s preset data may be lost.
Therefore, backup the user’s data in advance.
A. PREPARATION
1) PA-150A or PA-150B (AC adaptor) is used.
2) Measuring device: Frequency counter, which can detect thousandth value or more, Level meter (with JIS-C filter), Oscilloscope
Note: Use a stereo plug and connect a load resistor of 33Ω to the [PHONES/OUTPUT] jack for measurement unless otherwise
specified. Input impedance of the measuring device should be 1 MΩ or more.
3) Jigs: Pedal unit (LP-7A or LP-7AWH), Foot switch (FC-4 or FC-5), USB cable, USB flash memory, USB-MIDI driver (*1),
PC (Install a USB-MIDI driver(*1) in PC and finish the THROUGH setup.)
C#2 G#2
F2
C. TEST PROCEDURE
1) When the test program is started, “TEST” will be displayed on the LCD.
2) Press the [-] or [+] button of the number buttons to select a test program item.
3) Press the [START/STOP] button to execute the test.
If the test result is OK, or the test item is completed, press the [START/STOP] button again to return to the test item selection
display.
* Press the [-] or [+] button of the number buttons to select the next test program item.
* When the test result is OK, an asterisk sign (*) is added in front of its item name on display.
If the test result is NG, press the [DEMO/BGM] button or the lowest (leftmost) white key to return to the item selection display.
32
DGX-660B/DGX-660WH
34
DGX-660B/DGX-660WH
35
DGX-660B/DGX-660WH
• Other Tests
Noise Level Check
Connect the level meter (with JIS-C filter) to the L/R of the [PHONES/OUTPUT] jack. (33 Ω load)
Set the [MASTER VOLUME] to the maximum level and check the noise level. Do not insert any plugs to [AUX IN] jack.
· PHONES L, R: –90 dBu or less
36
DGX-660B/DGX-660WH
■■BACKUP
The following data will be always maintained even if the power is turned off.
If you want to initialize backup data, use the "Clearing Backup data" operation of "INITIALIZATION" as explained below.
The "Clearing Backup data" does not delete the files that have been transferred from a computer or loaded from a USB flash memory.
If you want to delete the all files, see "Clearing files in flash memory area" below.
● Backup Data
• Piano Room settings
• Registration Memory data
• Microphone settings
• Function Settings:Tuning, Split Point, Touch Sensitivity, Style Volume, Song Volume, Wireless LAN Volume,
Metronome Volume, Grade, Demo Group, Demo Play mode, Demo Cancel, Panel Sustain,
Master EQ type, Chord Fingering, Auto Power Off setting, Damper Resonance ON/OFF,
Output Gain, I.A. Control ON/OFF, I.A. Control Depth, Audio Volume, Aux IN Level,
Portamento Time, Assignable Pedal
• Wireless LAN settings
In addition to the Backup data above, all the User Songs and all the Song and Style files transferred from a computer or loaded from
a USB flash memory will be maintained even if you turn off the power.
■■INITIALIZATION
This function erases the Backup data described above and Song/Style data, then restores all the default factory settings.
As required, execute one of the following two procedures.
When you "Clearing files in flash memory area", Song data and Style data you have purchased and downloaded
will also be cleared. Make sure to save your important data by transferring to a computer.
37
DGX-660B/DGX-660WH
Explanation of symbols
Display Explanation of behavior
Normal processing
Explanation of judgement for NG
Power ON
Yes
Initialize BOOT SDRAM Starts accessing to SDRAM(IC026,027).
Initialize Ports
PSWO=H (IC023,T4) Test Program routine
LCD-IC=H (IC023,AB3)
LCD-OFF=H (IC023,Y4)
Will not start up if the fail safe circuit check
Fail safe NG
results in NG. Conduct failure detection
/LED-DRV0=H (IC023,W3)
circuit check system check in Test Mode.
/LED-DRV1=H (IC023,Y1)
/LED-DRV2=H (IC023,Y2) OK
/LED-DRV3=H (IC023,AA1)
*only /LED-DRV0,1 actually used
Yes
Install Mode? Yes
Backup Clear
Program Flash ROM(IC007) is defective if
No started
"Program Installer" No "Clearing backup data..." is displayed every
"Clearing backup data..." time.
MUTE=L (IC023,T3) MUTE is canceled after 3 seconds from power on. SP-
SP-OFF=L (IC023,T2) OFF is canceled when headphones are not connected.
Opening screen Starts accessing to LCDC(IC006).
will appear
Pulse is output from * "Factory Set executed" refers to the condition of turning on the power after
ERR-DETECT(IC023 Y16)
executing "Factory Set" in the Test Program.
38
DGX-660B/DGX-660WH
PARTS LIST
■■ CONTENTS
OVERALL ASSEMBLY................................................................. 2
MAIN UNIT................................................................................... 5
UPPER CASE ASSEMBLY.......................................................... 9
BOTTOM BOARD ASSEMBLY................................................... 10
KEYBOARD ASSEMBLY............................................................ 11
ELECTRICAL PARTS................................................................. 13
Note: See parts list for details of circuit board conponent parts.
A: Australian model Q: South-east Asia model
B: British model T: Taiwan model
C: Canadian model U: U.S.A. model
D: German model V: General export model (110V)
E: European model W: General export model (220V)
F: French model N,X: General export model
H: North European model Y: Export model
I: Indonesian model K: Korean model
J: Japanese model P: Brazilian model
M: South African model Z: India model
O: Chinese model
WARNING
Components having special characteristics are marked and must be replaced with parts having specifications equal to
those originally installed.
■■OVERALL ASSEMBLY
10
100d 60
60c
60b
60d
140
140a
140c
60d 100e
100b 140b
100b
100e
60e 140c
60e
70
60a 70d
80b 70d
70c
70b
100a
80a
80 70a
80c
80b
100d
90 90a
100c
70e
100a
70e
100a
100b
100c
100d 100
100e
90 90b
100c
2
DGX-660B/DGX-660WH
• DGX660B
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
ACCESSORIES 付 属 品 DGX-660B
ZF451800 MUSIC REST WITH BAG BLACK 譜 面 板 袋 入 り
WU089600 FOOT PEDAL フ ッ ト ペ ダ ル
* ZS390400 AC ADAPTOR SET PA-150B E A C ア ダ プ タ - E,I
* ZS390300 AC ADAPTOR SET PA-150B B A C ア ダ プ タ - B
WK014700 AC ADAPTOR PA-150U U A C ア ダ プ タ - U,C
* ZS390200 AC ADAPTOR SET PA-150B K A C ア ダ プ タ - K
* ZN031100 AC ADAPTOR SET PA-150B BRA A C ア ダ プ タ - P
* ZN640000 AC ADAPTOR SET PA-150B A A C ア ダ プ タ - A
* ZM962000 AC ADAPTOR SET PA-150B CHN A C ア ダ プ タ - O
* ZS388400 CHINESE SHEET SET BLACK 中 文 シ ー ト 袋 入 り O
* ZU723100 AC ADAPTOR SET PA-150B IN A C ア ダ プ タ - Z
∗ : New Parts
3
DGX-660B/DGX-660WH
• DGX660WH
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
ACCESSORIES 付 属 品 DGX-660WH
ZF451900 MUSIC REST WITH BAG WHITE 譜 面 板 袋 入 り
WU089600 FOOT PEDAL PK #3332 フ ッ ト ペ ダ ル
* ZS390400 AC ADAPTOR SET PA-150B E A C ア ダ プ タ - E,I
* ZS390300 AC ADAPTOR SET PA-150B B A C ア ダ プ タ - B
WK014700 AC ADAPTOR PA-150U U A C ア ダ プ タ - U,C
* ZS390200 AC ADAPTOR SET PA-150B K A C ア ダ プ タ - K
* ZN031100 AC ADAPTOR SET PA-150B BRA A C ア ダ プ タ - P
* ZN640000 AC ADAPTOR SET PA-150B A A C ア ダ プ タ - A
* ZM962000 AC ADAPTOR SET PA-150B CHN A C ア ダ プ タ - O
* ZS388500 CHINESE SHEET SET WHITE 中 文 シ ー ト 袋 入 り O
* ZU723100 AC ADAPTOR SET PA-150B IN A C ア ダ プ タ - Z
∗ : New Parts
4
DGX-660B/DGX-660WH
■■MAIN UNIT
Bottom view 1 Upper Case Assembly
10 70 80 100 110 130
(See page 9.)
350
x2
330
x2
30 40 30 60 50 90 120 140
Bottom view 2
300 300a 300b 900 250 900 230 730 600 900 150 900 630 900 160 900
x2 x3 x4 x12 x3 x7
900
290
900
900
690 900 900 180 650 210 900 470 200 470 660 900 270 280 900
x7 x2 x2 x3
380 LCD Assembly
Rear view
910
Bottom view 3
930 900 370 930 460 930
x2
900
900
330
330
900
900
5
DGX-660B/DGX-660WH
Bottom view 4
700 710 640 740 190 900 620
x4
940 940
Top view
Keyboard Assembly
260 240 390 170
(See page 11.)
6
DGX-660B/DGX-660WH
• DGX660B
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
∗ : New Parts
7
DGX-660B/DGX-660WH
• DGX660WH
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
∗ : New Parts
8
DGX-660B/DGX-660WH
20
50
30
110
10 110
40
60
60
60 100
80
120
Reversal 90
80
60
60
130
70
130
9
DGX-660B/DGX-660WH
140 140
160 160
Top view 2
S60 220
100
x4 50 110
x8 100 110
x8 100
x4 50
220
200
x8 170 190 170 10 120
x15
∗ : New Parts
10
DGX-660B/DGX-660WH
■ KEYBOARD ASSEMBLY
270
270
80
80a
70
70a
K1 Keyboard Assembly
40
30
40a
30a
50 20 270
50a
70
70a
20a
210
200 30
260
200
30a
230
200 20 270
GHL88 Circuit 230a
Board Assembly
260 200
200
230d
20a
200
190 230b
200 60
230d
260 60a
190
230c
K2
K3 K4
A-1
180
90 F#1
170
G1
130
100 E3 10
F3
140
D5
110
D#5
150
• Hammer, white key • Hammer, black key
90 130
120
100 140 C7
160
110 150
120 160
11
DGX-660B/DGX-660WH
∗ : New Parts
12
DGX-660B/DGX-660WH
∗ : New Parts
13
DGX-660B/DGX-660WH
AJACK,DJACK,PB,USB,DM
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
∗ : New Parts
14
DGX-660B/DGX-660WH
DM
REF NO. PART NO. DESCRIPTION 部品名 REMARKS QTY
∗ : New Parts
15
OVERALL CIRCUIT DIAGRAM
<from N10>
<from Page2:H7>
SWX08
SDRAM 128M
6
<to Page4:O3>
LCD CONTROLLER 8
<from Page4:N5>
<from Page2:B3>
9
VOLTAGE DETECTOR
INVERTER
to AJACK-CN423
<Page5:E12>
LCD
<to Page2:C4, Page3:K3> UNIT 11
28CC1-2001154680 1
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
DM 2/4
2
INVERTER
SWX08 SWX08 <to Page3:H4>
<to Page3:H4>
3
<from Page3:E9>
<to Page1:D9>
<from Page4:D3>
<from Page1:O11>
<from Page4:D4> <to Page1:C10>
<from Page3:P8> <from Page3:J2>
<from Page4:B7>
4 <from
Page3:H4>
<from Page4:D5>
<from Page1:N10>
E-GKS
<from Page3:P7>
<from Page3:P7>
SDRAM 64M
7 <to Page3:L4>
<to Page3:L3>
<to Page4:D5>
<to Page1:H4>
10
28CC1-2001154680 1
11
to GHL88M-CN2
<Page7:I6>
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
<from Page1:O11>
INVERTER AND 3
<from Page2:H7>
<to Page4:B10>
4
to PNR-CN2
<Page6:B9>
<from Page2:B3>
<from Page2:B3>
SWX08
DC/DC CONVERTER
<to Page2:O6>
<to Page2:O5>
<to Page2:L4>
8
to DJACK-CN410
<Page6:L7>
<to Page2:D3>
10
to USB-CN411
<Page6:L11>
to DJACK-CN409
11
<Page6:L8>
<from Page1:N10>
28CC1-2001154680 1
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
3
<from Page1:N6>
<to Page2:D4>
SWX08
to AJACK-CN402
<Page5:N8>
4
ADC
<to Page2:D4>
<to Page1:D9>
<to Page3:M2>
<to Page3:L9>
<to Page3:P9>
5
<from Page2:H7>
<to Page2:B5>
OP AMP
6
to AJACK-CN601
<Page5:P3>
ADC
7 <toPage2:D4>
POWER AMP
20Wx2
<from Page3:J2>
DAC
to AJACK-CN415
<from Page3:I3>
<Page5:G2>
10
11
<from Page3:J2>
HEADPHONE AMP
28CC1-2001154680 1
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
Tweeter L
2
to DM-CN012
<Page4:A10>
3
Woofer L
AJACK
OP AMP
OP AMP
to DM-CN015
<Page4:A6>
MIC VOLUME
4
MIC IN Woofer R
REGULATOR
+9.0V
5
Tweeter R
6
AUX IN
OP AMP
to DM-CN013
7
<Page4:A2>
PHONES/OUTPUT
8
PWR
to DM-CN008
<Page4:A4>
PB
9
28CC1-2001113986
28CC1-2001154681 1 10
MVR
11
to LCD BackLight
<Page1:J11>
28CC1-2001154681 1
28CC1-2001113986
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
2 PNL
PEDAL
to DM-CN007
3 <Page3:D7>
28CC1-2001113986
to DM-CN005
<Page3:D2>
4
5 DJACK
28CC1-2001113986
6
ENC
to DM-CN009
<Page3:D8>
SUSTAIN
7
28CC1-2001113986
PNR
8
to DM-CN10
USB <Page3:D11>
TO HOST
28CC1-2001154681 1
9 to DM-CN006
<Page3:D4>
10
USB
11
to DM-CN10
USB <Page3:D11>
TO DEVICE
28CC1-2001113985 2 28CC1-2001113986
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH
Q P O N M L K J I H G F E D C B A
3
GHL88L GHL88M
(C # 2 ~ C5)
(A-1 ~ C2)
28CC1-2000006192 28CC1-2000006193 2 6
to DM-CN001
<Page2:M10>
GHL88H 7
(C # 5 ~ C7)
28CC1-2000006194
10
11
12
DGX-660B/DGX-660WH DGX-660B/DGX-660WH