Professional Documents
Culture Documents
Shinrai-Prime - Educate The Customer For Water Seperator Drain
Shinrai-Prime - Educate The Customer For Water Seperator Drain
SUBJECT
OUTLINE
This is to educate the dealers/customers to drain the water/sediment from Fuel water separator. Whenever
water level indicator lights up in the monitor.
Make sure that customers and dealers understand the maintenance procedure as instructed in this service
bulletin.
APPLICABLE MODELS
INFORMATION
Location of Fuel Water Separator:
Fuel water separator was located on RHS of machine main frame mast and side of engine oil level dip
stick.
1. Position the machine on level ground and lift the machine from ground level with the help of front
loader and Backhoe attachments.
2. Shut off the engine.
3. Pull the lock of water in fuel indicator sender connector and then disconnect the harness
connector.
4. Use your hand to open the drain valve. Turn the valve counter clockwise approximately 3 and ½
turns or until drain occurs.