Professional Documents
Culture Documents
1D Governor Caterpillar Electronic 3
1D Governor Caterpillar Electronic 3
GOVE1 – ELECTRONIC
GOVERNOR
The standard mechanical governor regulates the
steady state generating set speed within ±0.8%,
with a speed droop from no load to full load of
4%.
Fitting an electronically governed actuator
improves the steady state speed to within ±0.25%
GOVE1 to provide isochronous frequency regulation
typically required when supplying electronic or
other non-linear loads.
CONTROL REF
BIAS VIA GOVE1 is available on GEP80SP1, GEP100
and GEPX100.
LOAD SHARING
CONTROL NETWORK
ACTUATOR
FUEL INJECTION
CONTROL
PUMP
UNIT
ENGINE FLYWHEEL
RPM
SIGNAL
MAGNETIC PICK-UP
GOVE4 –
ISOCHRONOUS
ELECTRONIC
GOVERNOR
The standard mechanical governor regulates the
steady state generating set speed within
±0.8%, with a speed droop from no load to
full load of 4%.
Fitting an electronically governed actuator
improves the steady state speed to within ±0.25%
to provide isochronous frequency regulation
typically required when supplying electronic or
other non-linear loads.
GOVE4 is fixed for isochronous operation only.
GOVE4 Speed adjust potentiometer option PSS1 cannot
be used with this governor option. Models
GEH175, GEH188, GEH220-2, GEH 250-2 and
GEH275-2 have the GOVE4 function as standard
in the ECM.
GOVE5/GOV6
– ELECTRONIC
GOVERNOR
Actuator and
Control Unit
Standard Features:
l Compact design
Control
Unit l 50/60 Hz selection
l Raise/lower speed capability
Engine Flywheel Fuel Injection
Pump
l External bias (synchronizing)
RPM
Signal
Magnetic Pick-up