JPK/SLDN/PKOI
PERAKUAN PROSES KERJA SYARIKAT / SYARIKAT LATIHAN DALAMAN
(IN-IIOUSE) BERDASARKAN NOSS
Kod dan Nama Program: RB-050-3, 2012-Cl FURNITURE PRODUCTION OPERATION
Panduan:
5) Maklumat ini hendakish dilenakap4an bagi setisp program yang digchon
2) Work Actullies/Task hencekleh diengkapkan berdasarkan kepada CU & Work Activiias / Duty & Task yang terdanat
alam NOSS pagi program yang sipohan
LOKAS! AKTIVITI PRAKTIKAL DI SYARIKAT
CU-WORK ACTIVITIES / DUTY-TASK PUSAT AGENSI/PREMIS
SL Gordasarken Setup Progam DORON) paggy (LATINAN vuan
frampinner (Lampirkan Borang
Borang JPK-
SLONaUD1) — JPK-SLON-Muot)
1. | Identify work requirements,
1 order interpretec ording (TYPE!
1.1 Work order interpreted according TREY coy op
sitions SAFADFDSG DFDF
DFDSF
10 product spec
1.2 Pull size drawing copied.
1.3 Product sample interpreted and
traced.
2. | [demi jigs and fixtures requirement.
2.1 Types of component determined
according 10 work — orderiproduct
specifications
2.2 Types of jigs m
Machine that will be used with the
jigs and fixtures determined
erial determined,
3. | Identify machine and equipment
31 Machine and equipment
determined according to and
fixiures specifications
3.2. Usage of each machine and
equipment clearly stated according 10
manuals.
4.) Cary out jigs and fixtures maki
4.1 Machine conditions checked for
safety, performance and sett
4.2 Machine manual
imterpreted’referred
4.3 Machine set up confirmed
according to requirements.
4.4 Machine operated accord
manual and specifications to produced
jigs components
45 Jigs and fixtures compon
0IPK/SLDN/PKO!
assembled according t0 specifi
4.6 Safety procedure applied,
4.7 Workplace properly arranged and
cleaned
Verify jigs and fixtures condition.
5.1 digs and fixtures specification
checked.
52
conformity with product speci
5.3. QC endorsement acquired
according to Standard Operating
Procedure (SOP)
5.4 Jigs and fixtures stored placed
us and fixtures tested for
fications.
properly at designated arearplace in
accordance with company’s storage
procedures
Report jigs and fixtures fabrication
activities,
6.1 Jigs and fixtures preparation
activities confirmed according to work
order’product specifications,
6.2 Recording format (work order.
checklist, QC forms, pallet label, ete.)
completed according to Standard
Operating Procedure (SOP).
PERAKUAN
Dengan ini, saya memperakukan penyata di atas adalah benar sepanjang pengetahuen dan kepercayaan saya
Tandatal
Nam
Jawalan
Tarik
:ngan: