Professional Documents
Culture Documents
7301 Eng
7301 Eng
Diaphragm seals for aseptic connections with flat or form sealing are
to find in data sheet 7300.
MDM 7313, here with
Important information about advantages, applications and features Bourdon tube gauge
can be found in our model overview 7000 where you will also find model RCh 100-3
an overview of our other chemical seal series.
Please note especially the explanations about the influences of
temperature and other special operating conditions, and the Continuation Process Connection:
requirement of detailed ordering information resp. inquiries. Norm: Nom. Size: Model:
Please use our check list for pressure measuring instruments with Clamp
chemical seal to ensure the completeness of all required ordering Varivent® DN 50, 68 MDM 7313
information (for download to find at our website, PDF-Download). for Varinline® access units
You can receive the check list in printed version with mail upon
request. Neumo / BioConnect®
for DIN tubes DN 40...80 MDM 7340.5
Construction for ISO tubes DN 40...80 MDM 7340.9
MDM 7313
The diaphragm is flush welded to the body.
The complete measuring system is evacuated, completely filled with Body
a suitable filling liquid and hermetically sealed. Stainless steel 316 L (1.4435)
Do not open any connection of the Diaphragm
system! Otherwise filling fluid will Stainless steel 316 L (1.4435) flush welded,
leak out and the measuring system effective diaphragm Ø dM see tables on pages 3-4
cannot work properly anymore!
Nominal Pressure
PN 10 to 40, dependent on model and size, see pages 3-4
Standard Configuration
Instrument Connection 1)
Process Connection: G ½ (½" BSP) female
Norm: Nom. Size: Model:
Filling Liquid
With union nut 304 stainless steel (1.4301) polished Vegetable oil (FN 1)
DIN 11 864-1
Form A DN 25...80 MDM 7310.1 Pressure Ranges Measuring Instrument
Pressure gauge: dependent on model and size,
Südmo DN 25...80 MDM 7311 minimum pressure range and PN see tables on pages 3-4
Naue DN 40...80 MDM 7312 Minimum pressure ranges for other measuring instruments upon request
Accessories
Process Connection Pieces and Sealings
Process connection pieces such as welding connection pieces,
clamps, union nuts, and sealings are not part of our standard supply,
but available upon request.
• Instrument
request
connection female: G ¼, ½"NPT, ¼" NPT; others upon
• incheck
our model overview 7000 and our
list for measuring instruments with chemical seal
1)
to state only for separate ordered chemical seals
7301 - 8/06 P. 2 of 4 • ARMATURENBAU GmbH, D-46487 Wesel-Ginderich, Tel. +49(0)2803/9130–0, mail@armaturenbau.com • MANOTHERM Beierfeld GmbH, D-08344 Grünhain-Beierfeld, Tel. +49(0)3774/58–0, mail@manotherm.com
Dimensional Data, Weight, Minimum Pressure Ranges for Pressure Gauges
Dimensions ( mm / inches ) and Weight ( kg / lb ), Minimum Pressure Range for Bourdon Tube Gauge NCS 100 (4") 1)
PN Weight
Model DN D dM b m g1 Minimum Pressure Range1)
(bar/psi) (approx.)
63 21 0 - 4 bar .50
25
2.48 .83 54 0 - 60 psi 1.10
40 70 28 2.13 21 .65
32
MDM 7310.1 580 2.76 1.10 .83 1.43
G½
DIN 11 864-1 78 34 53 .73
40 ½" BSP 0 - 1 bar
3.07 1.34 2.09 1.61
0 - 15 psi
25 92 45 48 22 1.10
50
360 3.62 1.77 1.89 .87 2.43
Fig. A Fig. B
Dimensions ( mm / inches ) and Weight ( kg / lb ), Minimum Pressure Range for Bourdon Tube Gauges NCS 100 (4") 1)
PN Weight
Model DN D dM b m g1 Minimum Pressure Range 1)
(bar/psi) (approx.)
63 26 .50
25
2.48 1.02 0 - 2.5 bar 1.10
MDM 7311 40 70 28 0 - 30 psi .65
32
DIN 11 851 600 2.76 1.10 57 21 1.43
Südmo 2) 78 34 2.24 .83 .85
40
(Fig. A) 3.07 1.34 0 - 1 bar 1.87
25 92 38 0 - 15 psi 1.40
50
300 3.62 1.50 3.09
MDM 7312
10 63 30 58 22 0 - 2.5 bar .65
Naue 40
160. 2.48 1.18 2.28 .87 0 - 30 psi 1.43
(Fig. A) G½
MDM 7316 ½" BSP
40 78 38 56 .73
Guth 40
600 3.07 1.50 2.20 1.61
(Fig. A)
MDM 7317 70 34 .55
40
Neumo/BioConnect® 2.76 1.34 1.21
21 0 - 1 bar
for DIN tubes 82 45 .65
50 .83 0 - 15 psi
(Fig. B) 10 3.23 1.77 58.5 1.43
MDM 7317.1 160 70 38 2.30 .58
40
Neumo/BioConnect® 2.76 1.50 1.28
for ISO tubes 82 48 .68
50
(Fig. B) 3.23 1.89 1.50
1)
Dimensions for MDM 7311 to 7317 with nominal sizes up to DN also valid for corresponding vacuum and vacuum/pressure compound ranges.
80 upon request Data for other pressure measuring instruments upon request.
2)
Südmo standard W 500 D; optionally W 200 D or W 100 D available.
When ordering, please quote exactly which Südmo version is required!
7301 - 8/06 P. 3 of 4 • ARMATURENBAU GmbH, D-46487 Wesel-Ginderich, Tel. +49(0)2803/9130–0, mail@armaturenbau.com • MANOTHERM Beierfeld GmbH, D-08344 Grünhain-Beierfeld, Tel. +49(0)3774/58–0, mail@manotherm.com
Dimensional Data, Weight, Minimum Pressure Ranges for Pressure Gauges
Flange Connection:
APV / BioControl®
MDM 7319 MDM 7391
Dimensions ( mm / inches ) and Weight ( kg / lb ), Minimum Pressure Range for Bourdon Tube Gauges NCS 100 (4) 1)
PN Minimum Weight
Model DN D dM d b g1 g2 g3 k x
(bar/psi) Pressure Range 1) (approx.)
MDM 7319 10 100 52 66.2 56 4 x Ø 8.6 82 18.5 0 - 1 bar 0.80
50 2 x M8
APV In-line 150 3.94 2.05 2.61 2.2 .34 3.23 .73 0 - 15 psi 1.76
64 21 30.5 57.5 7 50 20 0 - 4 bar 0.40
25
2.52 .83 1.2 2.26 .28 1.97 .79 0 - 60 psi .88
G½
90 45 50 9 70 0.61
50 ½"
MDM 7391 16 3.54 1.77 1.97 64.5 .35 2.76 27 1.34
BSP —
Neumo / BioControl® 230 120 58 68 2.54 95 1.06 0 - 1 bar 0.98
65
4.72 2.28 2.68 11 3.74 0 - 15 psi 2.16
140 72 87.5 74.5 .43 115 37 1.54
80
5.51 2.83 3.44 2.93 4.53 1.46 3.40
Clamp Connection:
Varivent® for Varinline Access Unit
Dimensions ( mm / inches ) and Weight ( kg / lb ), Minimum Pressure Range for Bourdon Tube Gauges NCS 100 (4) 1)
PN Minimum Pressure Range Weight
Model DN Suitable for Tube Ø d d1 dM b1 g1 1)
(bar/psi) (approx.)
Ø 25 and Ø 32 mm 25 30 0 - 2.5 bar .56
50 50 66
MDM 7313 Ø .98 and Ø 1.26 360 1.18 55 G½ 0 - 30 psi 1.23
Varivent® Ø 40 up to 125 mm 16 46 2.17 ½" BSP 0 - 1 bar .82
68 68 84
Ø 1.57 up to 4.92 230 1.81 0 - 15 psi 1.81
BioConnect®
1)
Dimensions ( mm / inches ) and Weight ( kg / lb ), Minimum Pressure Range for Bourdon Tube Gauges NCS 100 (4)
PN Weight
Model DN D dM b1 g1 Minimum Pressure Range 1)
(bar/psi) (approx.)
64 34 .27
MDM 7340.5 40
2.52 1.34 .60
Neumo
77.4 45 .36
for DIN tubes 50
16 3.05 1.77 46.5 G½ 0 - 1 bar .79
230 64 38 1.83 ½" BSP 0 - 15 psi .30
MDM 7340.9 40
2.52 1.50 .66
Neumo
77.4 46 .39
for ISO tubes 50
3.05 1.81 .86
1)
Dimensions for nominal sizes up to DN 80 upon request also valid for corresponding vacuum and vacuum/pressure compound ranges.
Data for other pressure measuring instruments upon request.
The information in this leaflet is given in good faith, but we reserve the right to make changes without notice.
7301 - 8/06 P. 4 of 4 • ARMATURENBAU GmbH, D-46487 Wesel-Ginderich, Tel. +49(0)2803/9130–0, mail@armaturenbau.com • MANOTHERM Beierfeld GmbH, D-08344 Grünhain-Beierfeld, Tel. +49(0)3774/58–0, mail@manotherm.com