1 CHANNEL SECTION
i iS a}
ifrorajaye X
318 |8]8|8
78) )818 : pee
4 O}9/O10 w On
348 ]8]8|8 3
\Qoloaloot 1513)
Ce “fk aad
1. LOW IMPEDANCE INPUT: The XLR connector are low impedance, electronically
talanced ints than inpedance of 600 oh
2. HIGH IMPEDANCE INPUT: The standard ‘/s inch phone jacks are high impedance,
Cibatanced mpus with an pedanee of 20K oh
2. CHANNEL LEVEL CONTROL: The lve control provides continuously variable adjust
imentol the channel ouput othe main mining bse
4, CHANNEL MONITOR CONTROL: The monitor contol provides continously variable
dhstmentofthe sustzed inp signal othe monitor sing bss Its tally independent
ofthe ater chanel contol
5. HIGH EQUALIZATION CONTRO: The high FO contol asthe high eqaeey
Tespante ofthe pur chanvel, providing 21508 at KP ofcomtnuoushy vane active
Shelving equalization
6,LOW EQUALIZATION CONTROL: The low £Q contol alters the How equency response
‘ithe input chanel, providing 15d al 6OF of continuously variable acive shelving
Suazo,
7. CHANNEL DELAVEFFECTS CONTROL: The Channel Delay/iecs conto varies
theamount of channel signal sent to Ine bul-n dey un as wells tothe elects send
creat.
IV MASTER SECTION
8, MASTER MAIN CONTROL: The Master Main control adjusts the overall combined signal
level ofthe eightsix independent channels to the main output
9, MASTER MONITOR CONTROL: The Master Monitor control adjusts the overall com=
bined! signal level derived from the eighysix independent channel monitor controls 10 the
moniter output,
Using the graphic and power amp for monitor operation can be easily accomplished.
Connect a short, shielded cabie from the monitor output jack tothe graphic input. This
sends the monitor signal through the graphic and power amp.