This document outlines the key materials and instruments used for placing a rubber dam, including a rubber dam punch to make holes, clamps to stabilize the dam, forceps to place and remove clamps, a frame to stretch the dam and maintain a working area, and the dam sheet itself which aids control and isolates teeth. The clamps have a bow to hold the tooth, a jaw to grip the tooth, and a hole for forceps. Forceps have beaks to fit clamps, a sliding ring to lock and unlock, and a handle. Frames can be metal or plastic.
This document outlines the key materials and instruments used for placing a rubber dam, including a rubber dam punch to make holes, clamps to stabilize the dam, forceps to place and remove clamps, a frame to stretch the dam and maintain a working area, and the dam sheet itself which aids control and isolates teeth. The clamps have a bow to hold the tooth, a jaw to grip the tooth, and a hole for forceps. Forceps have beaks to fit clamps, a sliding ring to lock and unlock, and a handle. Frames can be metal or plastic.
This document outlines the key materials and instruments used for placing a rubber dam, including a rubber dam punch to make holes, clamps to stabilize the dam, forceps to place and remove clamps, a frame to stretch the dam and maintain a working area, and the dam sheet itself which aids control and isolates teeth. The clamps have a bow to hold the tooth, a jaw to grip the tooth, and a hole for forceps. Forceps have beaks to fit clamps, a sliding ring to lock and unlock, and a handle. Frames can be metal or plastic.
a. Used to make holes of different sizes in the rubber dam sheet. b. The punch stylus pierces a hole in the rubber dam sheet. 2. Rubber Dam Clamps a. To stabilize the rubber dam sheet during the treatment b. It varies on the type, size, shape, and degrees of flexibility Parts of the Clamp 1. Bow – rounds over the tooth and holds firm on the tooth. 2. Jaw – pointed part that holds the clamp around the cervical portion of the tooth. 3. Forceps hole – where the rubber dam clamp forceps is attached to the clamp 3. Rubber Dam Clamp Forceps a. To place and remove the rubber dam clamps on tooth Parts of the Forceps 1. Beaks – fits in the hole of the rubber dam clamp 2. Sliding ring – allows forceps to lock and loosen when placing or removing a clamp 3. Handle – to have a grasp for the clamp 4. Rubber Dam Frame a. To stretch the rubber dam in order to maintain an easy working area for the patient’s mouth Types of Frame 1. Metal Type 2. Plastic Type 5. Rubber Dam Material a. A thin sheet of latex or non-latex that aids with moisture control, infection control b. Stretched around the rubber dam clamp seated in the mouth c. Used to isolate the teeth for better view d. Waxed dental floss may be used to fit the rubber dam into the interproximal spaces of the tooth or teeth to be isolated