Sha vario dc
CONTROL DA820V3233
PARAMETER LIST
No. 402152 english
FRANK & KIRCHNER EFKA OF AMERICA INC. EEKA ELECTRONIC MOTORS
GM COKG SINGAPORE PIE UID.2 EFKA DA820V3233
OPERATOR LEVEL
Peraneter Designation unit max min | Preset | Ind.
Prg.
KL.767 KL.221 KL.767 KL.221 | Now
F-000 Arv| Start becktacking stitches 254 o |2 3 fa
forward
F-001 Arr | Start backtacking stitches 254 o 433) fa
backward
F002 Err | End backtacking stitches 254 o jz 3) fa
backward
—
F-003 Erv | End backtacking stitches 254 o |3 3) fa
forward
F008 LS | Light barrier compensating 254 o js 3 Ia
stitches
F-005 LSF | Musber of stitches of the 28 o |: oa) fa
Light barrier filter for
knitted fabrics
F-006 LSn | Nunber of Tight barrier 15 aefr oa fa
seams,
F-007 Ste | Nuaber of stitches of the 254 o | 2 fA
seam with stiten counting
F-008 -F- | Setting of pushoutton 3
with a pareneter fron the 4 aofr or fa
technician Tevel
1 = Needle cooling ON/OFF
2 = Stitch counting for
high 1ift walking
(see F-187) ON/OFF
3 = Ornamental backtack
ON/OFF
4 = Softstart ON/OFF
F-009 Lst | Sensitivity adjustment of 255 ° 16 A
the transmitted light barrier
F-080 sav] Start backtacking stitches 254 o fs 3) fa
forward (ornamental backtack)
F-081 sar | Start backtacking stitches 254 o fs 3) fa
backward (ornamental backtack)}
Hote: On the operator Teve}, the display does not show the parameter number (F-x«x), but only
the abbreviation (e.g. ARV) and the actual value (e.g. 004 - for 4 stitches).EFKA DA820V3233
OPERATOR LEVEL
Parameter Designation unit ax min | Preset | Ind.
Pra.
KL.767 KL.221 KL.767 KL,221] Nor.
F082 Ser} End backtacking stitches 254 o js 3) fa
backward (ornamental backtack
F-083 Sev] End backtacking sitches 250 o |3 3 fa
forvard (ornamental backtack)
F-085 cFw| Number of stitches after
triggering the bobbin
thread nonitor
Af F195 = 1..3 240 ° o D
if F195 = 4 5000 ° °
F-090 FES} Operating mode of the thread 6 ° oo a
pull-in device
the abbreviation (.
. 004 = for 4 stitches).
Note: On the operator level, the display does not show the parameter minber (Foxxx), but only
‘V) and the actual value (e.4 EFKA DA820V3233
TECHNICIAN LEVEL Code No. 1907
Parameter Designation unit rex min | Preset find,
Pg.
KL.767 KL.221 KL.767 KL.221| No.
Group 0 Stitches/Countings |
F-109 ssc Number of Softstart 2 ° aia
stitches
Group 1 Speeds
F-110 nt | Positioning speed PH 00 eo [reo 100 [a
Fett 12 | Upper Tinie setting wen [4000 1200 | nz [3300 1200 Ja
range nomox
Fait2 3 | start backtacking specs [om [3000 1200 | 200 [ze wo [a
F-113 mt | End backtacking speed wn 3000 1200 | 200 [12m 400 [a
F114 n5 | Speed after Tight barrier — |e | 3000 1200 | 200 1200 400 Ja
sensing
£118 n6 | Softstart speed RH 1200 100 }400 400 Jo
£117 nto] igh 11¢t walking speed ret 3000 1200 | 209 | 2000 600 Ja
F-118 n12| Speed eH 6000 oo |1500 800 Ja
Nodes see
FLA and
F182
F-119 nt | Speed stage graduation 3 1 jz 2 Ja
1 = Tinear
2 = slightly progressive
3 = highly progressiveEFKA DA8&20V3233 5
TECHNICIAN LEVEL Code No. 1907
Parameter Des ignat ion unit max min | Preset} ind.
Prg-
KL.767 KL.221 KL.767 KL.221| No.
Group 2 Speeds
F121 n2_| Lower limit setting range | RpH m2 soo 500 [A
max
F122 St | Intermediate stop in the oF orf [D
packtack
F-123 tns | Backtack synchronization tine | ms 500 o fo oc fo
F-124 ms] Gacktack synchronization speeq ron | 3000 1200 | 100 J1z00 400 |
Fa12e asd| Start delay, when starting [ms 2000 0 |200 200 [a
comand 1s given by covering
the Light barrier
(see F-129)
F-129 ALS | Yachine start by covering or oor fA
‘the Tight barrier without
previously heeling the pedal
back to the basic position
‘Additional prerequisites:
~ F-132 in position OW
= Function Tight barrier
sensing
switched on at the
‘control panel
= Initiation of the first
seam section "normal"
(Pedal in basic position
= Light barrier covered
= Pedal actuated forvard)
= Leaving the pedal in
position of the previous
sean sect fon
This function will be
deactivated by heeling the
pedal back to the basic
position.6 EFKA DA8&20V3233
TECHNICIAN LEVEL Code No. 1907
Paraneter Designation unit max min | Preset | and,
Prg.
KL.767 KL.221 KL.767 KL.221 No.
Group 3 Switching Functions
terminating the seam after
Tight barrier sensing
r-iat sst| sortetart ono a
F105 55 | Orwmetat backtck oro |e
F196 Far] Last stitch baivard or or |n
‘139 ni3| ofsptay ot mahioe pect | mom or ar [a
Group 4 Switching Functions
F-140 Mt | Node needle UP/00¥N 1 aofr ot fa
1 = Needle up
2 = Half stitch
{needle up/down)
3 = Full stitchEFKA DA8&20V3233
TECHNICIAN LEVEL
Code No. 1907
Parameter Designation
nit,
KU.767 KL.221
Preset
KL.767 L221
Ind,
Peg.
No.
Group 4 Switching Functions
F-141 S6n| Speed status for one seam
with stitch counting
0 = speed controt lable
dependent upon pedal
actuation up to the
set raximm speed (F-111)
1+ fixed speed (F-118)
without influence
hy the pedal
(Wachine stop by
heeting the pedal back
to the basic position
2 = limited speed
controTlable
dependent upon pedat
actuation up to the
set Tinit (F-118)
3 = with fixed speed,
can be interrupted by
full eetback
F142 Sin] Speed status for the free
seam and for the seam with
Vight barr ter
0 = speed contro} lable
by pedal actuation up
to the set maximum speed
(Fam)
1 = fixed speed (F-118)
without influence
by the pedal
(Hachine stop by heel ing
the pedal back to the
basic position
2 = limited speed
controtTable by pedal
actuation up to the set
Timit (F118)
3 = with fixed speed,
can be interrupted by
full Reelback
(only in connect ion with
light barrier On,
otherwise as mode 0)8 EFKA DA820V3233
TECHNICIAN LEVEL Code No. 1907
Parameter Designation unit, max min | Preset | Ind.
Prg.
KL.767 KL.221 KL.767 KL.221] No.
Group 5 Time Functions
F-160 t8 | Stitch correction cf 500 o fo oo fa
of the double start
backtack
(Prolongation of the
operating tine of the
stitch regulator - not
effective with ornanental
backtack)
F151 t9 | Stitch correction a 500 o fo oo fa
of the double end
backtack (Prolongat fon of
the operating tine of the
stitch regulator - not
effective with ornanental
backtack)
F-182 tnp | Runcout tine of the 1s 500 so |is0 180 Ja
high Tift walking speed after
switching off high Tift
valk ing Ie
F-153 brt | Braking poner oS 50 o fs 5 a
at machine standsti11
Group 6 DC Motor
F-161 dre} Direction of rotation of the 1 o ft oa da
motor
0 = clockwise rotation
1 = counterclockwise rotation
Group 7 Service Functions
F-170 Sri | Adjustment of the reference
position A
(Position 0) = Needle point
at the height of the needle
plateEFKA DA820V3233
TECHNICIAN LEVEL
Paraneter
Designation
Code No. 1907
Ind.
Prg.
Group 7
Service Functions
F-172 Sr2
Adjustment of the needie
positions
1 = Toner needle position
{stop position and
switch-on position
for the thread trimer
with class 467/767)
1 = lover needle position
(stop position
switch-on position
for thread trinmer and
thread tension release
with class 221)
IN = switch-off position
for the thread trimmer with
class 467/767
2. = switch-on position
for the thread tension
release with class 467/767
2A. = upper needle position
(stop position with classes
967/767 and 221)
The positions 3 and 3A are
to be set to 000
F172 $3.
Display of the signa)
position 1 to 1A (LED next
{to pushbutton 1 lights up)
or position 2 to 2A (LED next
‘to pushbutton 2 lights up)10
EFKA DA820V3233
TECHNICIAN LEVEL
Code No. 1907
Paraneter
Designation
unit
max
KL.767 L221
in
Preset
KL.767 KL.221
Group 7
Service Functions
Ind,
Prg.
Now
F173 Sr
Checking of the signal
outputs
Pushbutton 1 = Backtacking
Pushbutton 2 = Presser foot
Vifting
Pushbutton 3 = Pressure of the
presser foot
Pushbutton 4 = Thread tension
release
Pushbutton 5 = FF signal
Pushbutton 6 = High Tift for
walking foot
Pushbutton 7 ~ Thread clamp
Pushbutton 8 = Needle cooling
Pushbutton 9 = Thread trimer
By actuating the switches
(wake contacts [N.0.]
connected to the control
‘the function of these
switches is checked and
displayed with "on/oFF*
Fama
Mechanical adjustment of
‘the Tight barrier
F178
Language selection
EU--USA
ESP--Fra
F179
Display of the program
muaber with index
(top Vine) and identifi-
‘cation nusber (bottom
Vine)EFKA DA8&20V3233 ai
TECHNICIAN LEVEL Code No. 1907
Paraneter Designation unit ex min | Preset | tnd.
Prg.
KL.767 KL.221 KL.767 KL.221| No.
Group 8 Functions for Specific
‘Types
F-182 knP | Allocation of maximum speed 1 a a
(F-111) end minimum speed
(F-L17 = bigh lift walking)
for the 21 stages of the
Speedonat
Example of @ display:
10 15.19
2500
10. ~ display of the stage
up to which the
ppoximun speed is
effective
19. = display of the stage
from which the
nininun speed ts
effective
18 = display of the stage
2500 set on the Speedonat.
with corresponding
speed
Change of the setting:
Set Speedomt to the
desired stage, then pusty
button € briefly.
F-183 In? | Increments of revers on approx] 500, o jo o a
0.7°
F-104 dni | Run-out time for needle ms 000 0 |2s00 2500 Ja
cooling from machine stop
onwards
£-185 chp | nusber of stitches of the 190 1 fro 10 Ja
stitch counting of the high
Lift for walking foot
(see F-187)
F-106 Snk | Needle cooling Ce12 EFKA DA820V3233
TECHNICIAN LEVEL Code No. 1907
Parameter bes ignat ion unit. max min | Preset | Ind,
Peg.
KL.767 KL.221 KL.767 KL.221 | No.
Group 8 Functions for Specific
Types:
F-187 shP | Stitch counting for the high or or JA
Vift for walking foot (nigh
Vift for walking foot remains
activated at least for the
stitches programed with
F-185, independent of ‘the
duration of actuat ion
of the exterral knee switch
and {ts position)
F-188 rFw] Bobbin thread monitor ON/OFF oF oor A
see also F-195
F-109 Est | Function +1 stitch 1 0 ° D
0 = OFF /1=0N
Figo Fen] FF functions 2 o [2 0
F101 AF2| FF emote 1 F100 + 2 ofa D
[ram au] Fr set won [2000 200 | ao [soo sow fo
Group 9 General Functions
F-195 rfw| Bobbin thread monitor | 4 0 o o
functions
ie
F197 Fe | Function Rewry 80x oa
F-198 Foc | Format Henory Card OFF AEFKA DA820V3233 13
SUPPLIER LEVEL Code No. 3112
Paraneter Designation unit mx win | Preset find.
Peg.
HL.757 KL.221 1.767 KL.221| fo.
Group 0 Time Functions
F-200 t1 | Delay of speed release ns 500 so [100 100 Ja
after the start backtack
F-201 t2 | Activation delay of presser {ns 500 2 |e eo |a
foot Lifting with half
hee back
—
F-202 3 | start delay after presser [ns 00 10 |x 140 Ja
foot lifting
£-203 «4 | Tine of fu1T power of ns 600 o fo oo fa
presser foot Vif ting
F208 ¢5 | Hotding current for 7 o fo oo fa
presser foot Vifting
Stages 0.4.7
Stage 0 = 100%
Stage 1 = 12.58
Stage 7 = 87.5%
F207 bet | Braking effect {Ff set value 100 1 |o 6 a
fs changed <4 stages 255 1 [2 |B
F208 be2| Braking effect if set value 100 1 | 5 Ja
‘is changed =5 stages 255 1 |e 6 |B
Group 1 Time Functions
F-210 t8r| Stop tine for comutation — |s 500 0 |i 180 Ja
of the stitch regulator
for ornanental backtack
¥-212 t10| Tine of fu11 pover of as 600 ° 500 8
backtack ing
-213 t11 | Hotding porer for back- [as ? ° 4 8
tacking
Stages 0, 1...7
Stage 0 + 100 ¥
Stage 1 = 12.58
Stage ? - 67.5%
1 1__}14
EFKA DA8&20V3233
‘SUPPLIER LEVEL Code No. 3112
Parameter Designation unit mex min | Preset find.
Peg.
L767 KL.224 KL.787 KL.22t} No.
Group 2 Speeds
F-220 ALF | Accelerating pover of the 100 1 |x fa
stor
Group 3 Switching functions
F-231 Sal | Execution of the first or a
stitch after power Oh ov |e
at posit foning speed
Group 8 Functions for Specific
Types
F289 Set | Display of the machine aoe tee at
class
1 = class 467/767
2 = class 221
F-281 LSP | New machine start after om wR
blocking of mchine run with
pedal in position 0
(nevtrat)
ON = New machine start with
peda? in neutra?
position after end of
stgnal
OFF = New machine start
after end of signal
F-282 L0S| Blocking of machine run o 0) fA
0 = make contact (N.0.)
1 = break contact (1.6)
Group 9 Functions for Specific
Types
F-290 tFA| Stop tine for the ns 500 2 | a |a
the thread trimer
F-291 tFS] Switch-off delay of the 5 500 2 oo 60 fa
thread tension release
£-203 n9 | Limited speed of the om 3000 200 }1200 400 [A
manual orranental backtackEFKA DA820V3233
15
STATUS DISPLAYS
Display Designation
ino AL | Pedal not in neutral position,
wien switching on
Info AB
The position to which aT1
other position values refer
has not been stored
(reference position missing)
Ino MM
Control panel cannot be
clearly identified
Ino AS
Emergency run, no valid
machine select ident if ied
Info FL
trong code or function
runber
Ino EL
Position transmitter not
connected or defective,
mains voltage too low
Ino €2
Mains voltage too low
or power off > on too
short
Info £3
Machine locks or does
rot reach the desired
speed
Info E4
Control disturbed by
defective grounding or
oose contact
Info HL
Coomstation transmitter cord
or Frequency converter
disturbed
Info W2
Processor disturbedSke,
FRANKL & KIRCHNER GMBH & CO KG
SCHEFFELSTRASSE 73 - D-68723 SCHWETZINGEN
TEL: (06202)2020 ~ TELEFAX: (06202)202115 - TELEX: 466314
Shke,
(OF AMERICA INC.
3715 NORTHCREST ROAD - SUITE 10 - ATLANTA - GEORGIA 30340
PHONE: (404)457-7006 - TELEFAX: (404)458-3899 - TELEX: EFKA AMERICA 804494
Shke.
ELECTRONIC MOTORS SINGAPORE PTE. LTD.
67, AYER RAJAH CRESCENT 05-03 - SINGAPORE 0513
PHONE: 7772459 or 7789836 ~ TELEFAX: 7771048
1(1)-241095-A(4021 52EN)