Professional Documents
Culture Documents
com
RM9003B specification
RM9003Bis single channelledConstant current drive control chip, can - The peripheral circuit is simple and no magnetic components are required
directly drive high voltageledlight string, the output current is set by an - Multi-chip series or parallel application
external resistor to5mA~110mA, and the output current is constant at the - Chip can be used withledto sharePCBplate led
set value. The structure of the chip system is simple, the external - Current can be set externally
There are very few surrounding components and the circuit is simple. - Chip Application Line NoEMIquestion
- built-in600Vhigh pressureMOS
Application fields:
- The chip has over-temperature regulation capability
Package form:
Pin definition:
RM9003B_Rev.16.06 www.reactor-micro.com - 1-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
Pin description:
D. Chip positive
NC undefined pin
Limit parameters:
Note: The limit value means that beyond the working range, the chip may be damaged. The recommended operating range is the range within which the device will function normally, but
individual performance specifications are not guaranteed. Electrical parameters define the DC and AC parameter specifications of the device over the operating range and under test conditions that
guarantee specified performance specifications. Accuracy is not guaranteed in this specification for parameters for which upper and lower limits are not given, but typical values are a reasonable
typical application:
picture1:single drive
RM9003B_Rev.16.06 www.reactor-micro.com - 2-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
Electrical parameters:
RM9003B_Rev.16.06 www.reactor-micro.com - 3-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
working principle:
For linear circuits, when the input voltage changes (or exceptledThe residual voltage outside the string) causesICThe fluctuation of the
voltage carried by both ends makes theICSelf power consumption changes, so in the whole circuitICTo undertake the remaining power, constant
becauseICbear the residual voltage in the circuit, so design usingledThe string voltage approachesACrectified voltage, so that the operating
efficiency of the entire circuit is optimal. It is recommended that the chip dissipate less than1.5W.
AC input voltageV (Vrms), singleledDie Forward Voltage DropV (V), forward currentI (mA). then designled
Total number of grainsN :
( ×1.414 − )
N =
V : In the circuitICThe voltage borne, the greater the voltage, theICThe greater the self-loss.
When the input voltage is less thanledWhen the voltage of the lamp bead string,ledcan not work.
The chip has a built-in current limiting module. When the current flowing through the chip is greater than the maximum value determined by the chip, the chip will pass
Sport sense feedback control loop, reducingD.port current magnitude, and vice versa. In this way, the current of the entire linear circuit is dynamically balanced, so that the
flow pastledelectric currentI (mA)The same as the current flowing through the chip, the reference voltage of the built-in current limiting module is0.6V,
0.6
=
The chip adopts an over-temperature regulation design. When the drive power supply is overheated, the output current will be reduced step by step, thereby controlling the temperature
rise of the drive board and keeping the temperature of the drive board at the set value, so as to increase the reliability of the system and improveledservice life. The chip internally sets the over-
temperature regulation temperature point as130℃. The curve of output power versus chip temperature is shown in the figure below:
5 130
1
IC temperature ( )
RM9003B_Rev.16.06 www.reactor-micro.com - 4-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
RM9003BPackage information
mm
symbol
minimum value typical value maximum value
RM9003B_Rev.16.06 www.reactor-micro.com - 5-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
RM9003BPackage information
mm
symbol
minimum value maximum value
A 1.400 1.600
b 0.350 0.520
b1 0.400 0.580
c 0.350 0.440
D. 4.400 4.600
D1 1.550 REF
E. 2.350 2.550
E1 3.940 4.250
e 1.500TYP
e1 3.000TYP
L 0.900 1.100
RM9003B_Rev.16.06 www.reactor-micro.com - 6-
Shaanxi Yacheng Microelectronics Co., Ltd.
Single channel constant current LED control chip
RM9003B specification
RM9003BPackage information
mm
symbol
minimum value typical value maximum value
A1 0 ---- 0.10
A2 2.20 2.30 2.40
A3 0.90 1.00 1.10
b 0.75 ---- 0.85
c 0.50 ---- 0.60
D. 6.50 6.60 6.70
D1 5.30 5.40 5.50
D2 4.70 4.80 4.90
E. 9.90 10.10 10.30
E1 6.00 6.10 6.20
E2 5.20 5.30 5.40
e 2.20 2.286 2.40
L1 0.90 ---- 1.25
L2 1.70 1.80 1.90
L3 0.60 0.80 1.00
θ° 0° ---- 8°
RM9003B_Rev.16.06 www.reactor-micro.com - 7-
Shaanxi Yacheng Microelectronics Co., Ltd.