Professional Documents
Culture Documents
Reference standards
IEC 62612: Self-ballasted LED-lamps for general lighting services Performance requirements For
Energy Efficiency aspects;
IEC 62560: Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety
specifications
Manufacturer's Claim
Client Ref:
1|Page
MEASURED
PARAMETERS VERDICT
VALUES
1. MARKING
Mandatory markings
Brand Name AB-TECH P
Country of origin Nigeria P
Rated voltage/
85-265 P
voltage range (V)
Rated wattage (W) 5 P
Rated frequency (Hz) 50/60 P
Cap type B22 P
Burning position
Not restricted -------
(if restricted)
Symbol or information (if not
Not dimmable P
suitable in dimming circuits)
Product suitable for
Special conditions or restrictions p
indoor use
Rated luminous flux (lm) 400 p
Rated correlated colour
6500 P
temperature (K)
Rated average life (h) 40000 P
Rated efficacy (lm/W) 80 P
Compliance
Visual inspection of Mandatory markings P
Test with water Still clear P
Legibility after test Still Legible P
Visual inspection of Additional Product Information P
2. PROTECTION AGAINST ACCIDENTAL CONTACTS WITH LIVE PARTS
3. MECHANICAL STRENGTH
The cap shall remain firmly attached to the bulb or that part of the lamp which is used
for inserting or removing the lamp when subjected to the relevant minimum torque
levels
B15d and E14: (1.15Nm) N/A
B22, E26d, E26 and E27: (3Nm) 3.423 P
E39 and E40: (5Nm) N/A
4. LAMP WATTAGE
2|Page
Measured module
The initial wattage dissipated by power = 4.646
the lamp shall not exceed the
P
rated wattage by more 15%=0.5
than 10% 4.646<5.5
5. LUMINOUS FLUX
Measured Total
The initial luminous flux of each
luminous flux (lm) =
individual LED lamp in the
measured sample shall not be less
361.67
P
than the rated luminous flux by
more than 10 %. 10%=40
361.67>360
6. COLOUR
3|Page
REMARKS:
4|Page