2 AI Socorncanon 8C
to PSL 1 unless specifically identified as PSL 2. PSL 2 includes all the requirements of PSL 1 plus the adcitional
practices as stated herein.
‘Supplementary requirements apply only when specified. Annex A gives a number of standardized supplementary
requirements,
2 Normative References
‘The following referenced documents are indispensable for the application of this document. For dated references,
ony Casas Ee ‘applies. For undated references, the latest edition of the referenced document (including any
API Spectication 88, Threading, Gauging, and Thread inspection of Casing, Tubing, and Line Pipe Threads
API Specification SCT, Specifieation for Casing and Tubing
API Specification 7-1, Specification for Rotary Dril Stem Elements
API Specification 7-2, Specification for Threading and Gauging of Rotary Shouldered Thread Connections
‘API Recommended Practice 98, Application, Cars, and Use of Wire Rope for Oil Field Service
ASME B31.3 , Chemical Plant and Petroleum Refinery Pioing
ASIME Boller and Pressure Vessel Code, 2010, Section V, Nondestructive Examination, Section Vill, DIV 1, Rules for
‘Construction of Pressure Vessels; Section IX, Welding and Brezing Qualifeations
ASTMA 3702, Standard Test Methods and Definitions for Mechanical Testing of Steel Products
(ASTM A388, Standard Practice for Uitrasonic Examination of Heavy Steel Forgings
ASTM A488, Standard Practice for Stee! Castings, Welding, Qualifications of Procedures and Personnel
ASTM A770, Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM E4, Load Verification of Testing Machines
ASTM E125, Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASTM E165, Standard Test Method for Liquid Penetrant Examination
ASTM E186, Standard Reference Radiographs for Heavy-Wallled (2 to 4 "/2-in. (51 to 114-mm)) Steel Castings
ASTM E280, Standard Reference Radiographs for Heavy-Walled (47/2 to 12:in. (114 to 305-nm)) Stest Castings
ASTM E428, Standard Practice for Fabrication and Control of Stee! Reference Blocks Used in Ultrasonic Inspection
ASTM E446, Standard Reference Radiogrephs for Steel Castings Up to 2 in, (54 mn) in Thickness
ASTM E709, Standard Guide for Magnetic Particle Examination
ASNT, SNT-TC-1A 8, Recommended practice or personnel qualification and certification in nondestructive testing
'AEME International, 3 Park Avenue, New York, New York 10018-5990, wwe acme. org
ASTM Intematonal, 100 Barr Harboe Drive, West Conshohocken, Pennsylvania 18428. www asim org,
‘Amencan Society for Nondestructive Testing, 1711 Arlingate Lane, P.O. Box 28518, COUMEUS, Ohio 43228, www.asnt.orgDDriLuNs Ato PropueTioN HotenNG Eaupwent (PSL.1 AND PSL.2) 3
AWS D1.1 4, Structural Welking Code
AWS QC1, Standard for AWS Certification of Welding Inspectors
EN 287-1 5, Qualification test of welders ~ Fusion welding - Steels
ISO 104228, Potroleum and natural gas incusbies—Threacing, gauging and thread inspection of casing, tubing and
Ine pipe threads—Speeifcations
180 18614-1, Specification and quelification of welding procedures for metalic meterials—Welding procedure fest—
ait t Arc and gas welding of steels and arc wekding of nickel and nickel alloys
MSS SP-55 7, Quality standard for steel castings for valves, flanges and fitings and other piping components ~ Viswel
method for evaluation of surface irregularities
3. Terms, Definitions, and Abbreviations
3.1 Terms and Definitions
For the purposes of this document, the folloviing terms and definitions apply.
344
bearing-load rating
Celculated maximum load for bearings subjected to the primary load.
342
design load
‘Sum of static and dynamic loads that would induce the maximum allowable stress in an item.
343
design safoty factor
Factor to account for a certain safely margin between the maximum allowable stress and the specified minimum yield
strength of a materia,
ahd
design verification test
‘Test performed to valcate the integrity of the design calculations used.
34.6
dynamic load
Load applied to the equipment dus to acceleration effects.
34.6
equivalont round
Standard for comparing various shaped sections to round bars, used for determining the response to hardening
characteristics when heat treating low-alloy and martensitic corrosion-resistant steels.
7” American Welding Seciety, 850 NW Ledoune Road, Miami, Fonda 33125, vw aws.0°9
European Commitee for Standardization, Avenue Marx 17, 1000, Brussels, Bigham, wavv.cen eu
internatcrat Organization for Standardization, 1, ch. de la Voie-Creuse, Case postele $6, CH-1211, Geneva 20,
Syitzeriond, wieiso.0
7 Manutacorors Stordenstalion Gecily ofthe Val and Fitings Induct Ine, 127 Park Stet, NE, Venna, Virginia 22180-
£502, warms com.