LabVIEW Program for the measurement of current, Voltage, PQ ( power
quality ) factor Aim: To design LabVIEW Program for the measurement of current, Voltage, PQ ( power quality ) factor Apparatus Required: 1. Open the NI LabVIEW. 2. Go to blank VI. 3. Press CTRL +T. 4. Connect the hardware NI myDAQ 5. Right-click on block diagram windows. 6. Function pallet appears, then select measurement I/O 7. NI-DAQ mx DAQ assists, drag it, and place it in the Block diagram window. 8. Create new will appear ------ click acquire signal -------- select analog input (ai0 or ai1) ------below that choose current or voltage. 9. Choose the terminal My DAQ ai0 ai1 10. press Finish. 11.DAQ assistant will appear, In timing setting , choose Acquisition Mode then select Continuous Samples For Current measurement:
Shunt Resistors.
12.Choose External check by clicking run button
and the Select OK It Builds , then notification for creating WHILE LOOP will appear choose Yes. 13.Prefix “ WHILE LOOP” for continuous mode. 14.Select DAQ Assistant data terminal, 15.Right click and Create Numerical Indicator 16.Right click in the front panel window to open the control pallet for Wave Form chart 12. To design LabVIEW Program for measurement of voltage to current conversion 13. Characteristics of capacitive measurement systems 14. Measurement using proximity sensors. 15. Characteristics of a capacitive transducer.
React.js for A Beginners Guide : From Basics to Advanced - A Comprehensive Guide to Effortless Web Development for Beginners, Intermediates, and Experts