Professional Documents
Culture Documents
© September 2017. TVH Group NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. No part of this catalogue may be reproduced or
communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval
system, without prior and explicit permission of TVH Group NV. TVH is a supplier of after-market spare parts and accessories that are suitable for
the maintenance and repair of OEM-equipment. OEM-references and brands are purely indicative and do not imply that the accessories and/or
spare parts are coming from the original equipment or parts manufacturer. TVH®, TotalSource® and CAM System® are registered trademarks of
TVH Group. Photographs and illustrations are included for reference purposes only. Printing errors reserved. All sales are subject to the general
terms & conditions of sale on www.tvh.com/avv.
2
Introduction
In this special you can find an overview of our types of forks, extensions and
related accessories.
Whether you need to equip your forklift, telehandler, reach truck or another
machine, you will find the right fork for every application. Discover also a
selection of our strong, high-quality CAM System forks and accessories to protect
your load, machine and driver.
3
CAM System forks
CAPACITY/
CLASS SECTION REF - FORK LENGTH
PAIR
mm kg/mm 800 mm 900 mm 1000 mm 1070 mm 1100 mm 1150 mm 1200 mm 1300 mm
2A 80 x 40 2000/500 100PS2331 100PS2818 100PS2819 100PS2367 100PS2820 100PS2826 100PS2832
2A 100 x 35 1900/500 100PS2332 100PS2337 100PS2343 100PS2361 100PS2368 100PS2821 100PS2369 100PS2833
2A 100 x 40 2500/500 100PS2333 100PS2338 100PS2344 100PS2362 100PS2369 100PS2822 100PS2827 100PS2834
2A 100 x 45 3000/500 100PS2334 100PS2339 100PS2345 100PS2363 100PS2370 100PS2823 100PS2828 100PS2835
2A 120 x 40 3000/500 100PS2346 100PS2364 100PS2371 100PS2824 100PS2829 100PS2836
2A 125 x 40 3000/500 100PS2372 100PS2830
2A 125 x 45 4100/500 100PS2340 100PS2347 100PS2373 100PS2825 100PS2831 100PS2837
2B 80 x 40 2000/500 100PS2335 100PS2975 100PS2348 100PS2375 100PS2968 100PS2394
2B 100 x 35 1900/500 100PS2374 100PS2393
2B 100 x 40 2500/500 100PS2336 100PS2341 100PS2349 100PS2376 100PS2390 100PS2395 100PS2421
2B 100 x 45 3000/500 100PS2352 100PS2379 100PS2398
2B 120 x 40 3000/500 100PS2350 100PS2377 100PS2391 100PS2396
2B 125 x 45 4100/500 100PS2351 100PS2378 100PS2397
3A 100 x 45 3000/500 100PS2353 100PS2380 100PS2399 100PS2422
3A 100 x 50 3900/500 100PS2354 100PS2381 100PS2400
3A 120 x 50 4500/500 100PS2355 100PS2382 100PS2401
3A 125 x 45 4100/500 100PS2356 100PS2383 100PS2392 100PS2402 100PS2423
3A 125 x 50 5000/500 100PS2342 100PS2357 100PS2365 100PS2384 100PS2403 100PS2424
3A 130 x 60 7200/500 100PS2386 100PS2406 100PS2426
3A 150 x 50 5800/500 100PS2358 100PS2366 100PS2385 100PS2404 100PS2425
3A 150 x 60 7000/600 100PS2405
3B 100 x 50 3900/500 100PS2387 100PS2407
3B 125 x 45 4100/500 100PS2359 100PS2388 100PS2408 100PS2427
3B 125 x 50 5000/500 100PS2409 100PS2428
3B 150 x 50 5800/500 100PS2410 100PS2429
4A 130 x 60 7200/500 100PS2412
4A 150 x 50 5800/600 100PS2413
4A 150 x 60 7000/600 100PS2360 100PS2389 100PS2414 100PS2430
4A 150 x 65 8220/600 100PS2411
4A 150 x 70 9000/600 100PS2415
4A 200 x 60 9200/600 100PS2416
4A 200 x 70 12000/600
4B 150 x 50 5800/600 100PS2417
4B 150 x 60 7000/600 100PS2418
4B 200 x 50 6500/600 100PS2419
4B 200 x 60 9200/600 100PS2420
4
CAM System forks
·· High-quality material:
made of chromium-manganese steel which guarantees a high mechanical strength
·· Refined finish:
manufactured on the basis of a rolled profile
·· Observe the European standards:
ISO standards 2328 and 2330
·· Extensive range:
TVH has an extensive range of CAM System forks in various dimensions
·· TVH certified
CAPACITY/
CLASS SECTION REF - FORK LENGTH
PAIR
mm kg/mm 1400 mm 1500 mm 1600 mm 1800 mm 2000 mm 2200 mm 2400 mm
2A 80 x 40 2000/500 100PS2838 100PS2844 100PS2851 100PS2857
2A 100 x 35 1900/500 100PS2839 100PS2845 100PS2852
2A 100 x 40 2500/500 100PS2840 100PS2846 100PS2853 100PS2858 100PS2863 100PS2867
2A 100 x 45 3000/500 100PS2841 100PS2847 100PS2854 100PS2858 100PS2864 100PS2868 100PS2870
2A 120 x 40 3000/500 100PS2842 100PS2848 100PS2855 100PS2860 100PS2865 100PS2871
2A 125 x 40 3000/500 100PS2849 100PS2861
2A 125 x 45 4100/500 100PS2843 100PS2850 100PS2856 100PS2862 100PS2866 100PS2869 100PS2872
2B 80 x 40 2000/500
2B 100 x 35 1900/500
2B 100 x 40 2500/500 100PS2431 100PS2452 100PS2474 100PS2493 100PS2516
2B 100 x 45 3000/500 100PS2432 100PS2476
2B 120 x 40 3000/500 100PS2976
2B 125 x 45 4100/500 100PS2433 100PS2475 100PS2494 100PS2517
3A 100 x 45 3000/500 100PS2434 100PS2453 100PS2477 100PS2495 100PS2518
3A 100 x 50 3900/500 100PS2435 100PS2454 100PS2478 100PS2496 100PS2519 100PS2547
3A 120 x 50 4500/500 100PS2436 100PS2455 100PS2479 100PS2497 100PS2520 100PS2548
3A 125 x 45 4100/500 100PS2437 100PS2456 100PS2480 100PS2498 100PS2521 100PS2537 100PS2549
3A 125 x 50 5000/500 100PS2438 100PS2457 100PS2481 100PS2499 100PS2522 100PS2538 100PS2550
3A 130 x 60 7200/500 100PS2441 100PS2460 100PS2484 100PS2502 100PS2525 100PS2553
3A 150 x 50 5800/500 100PS2439 100PS2458 100PS2482 100PS2500 100PS2523 100PS2539 100PS2551
3A 150 x 60 7000/600 100PS2440 100PS2459 100PS2483 100PS2501 100PS2524 100PS2540 100PS2552
3B 100 x 50 3900/500 100PS2442 100PS2461 100PS2485
3B 125 x 45 4100/500 100PS2443 100PS2462 100PS2486 100PS2503 100PS2526 100PS2554
3B 125 x 50 5000/500 100PS2444 100PS2463 100PS2487 100PS2504 100PS2527 100PS2555
3B 150 x 50 5800/500 100PS2445 100PS2464 100PS2488 100PS2505 100PS2528 100PS2541 100PS2556
4A 130 x 60 7200/500 100PS2446 100PS2466 100PS2489 100PS2507 100PS2530
4A 150 x 50 5800/600 100PS2447 100PS2467 100PS2490 100PS2508 100PS2531 100PS2542 100PS2558
4A 150 x 60 7000/600 100PS2448 100PS2468 100PS2491 100PS2509 100PS2532 100PS2543 100PS2559
4A 150 x 65 8220/600 100PS2465 100PS2506 100PS2529 100PS2557
4A 150 x 70 9000/600 100PS2449 100PS2469 100PS2492 100PS2510 100PS2533 100PS2544 100PS2560
4A 200 x 60 9200/600 100PS2470 100PS2511 100PS2534 100PS2545 100PS2561
4A 200 x 70 12000/600 100PS2977 100PS2512 100PS2535 100PS2546 100PS2562
4B 150 x 50 5800/600 100PS2450 100PS2471 100PS2513
4B 150 x 60 7000/600 100PS2451 100PS2472 100PS2514 100PS2536 100PS2563
4B 200 x 50 6500/600
4B 200 x 60 9200/600 100PS2473 100PS2515
5
CAM System forks
BLANK FORKS
6
CAM System forks
PIN-TYPE FORKS
7
CAM System forks
Application:
·· To handle slippery loads like metal cages or plastic boxes
·· To protect loads against damages and scratches due to contact with bare forks
Benefits:
·· Higher safety at work: no risk because of slipping load
·· Slip resistance in dry and even in wet condition
·· Noise reduction, especially when transporting metal parts in residential areas/at night
·· Protection of transported goods against damages or scratches, e.g. transports without pallets
(protection in the fork back and heel area)
·· Abrasion and cut resistance for optimum use and long lifetime
·· High flexibility, available and retrofittable for many different dimensions and applications
·· Short delivery times
Features:
·· Coating thickness approx 5 mm
·· Shore hardness: 92 shore A
·· Abrasion resistance: 140 mg according to ASTM D 1044
·· Tensile strength: 21 N/mm²
·· Operating temperature: -40°C to 80°C
·· Coating of fork blade and/or fork back
·· Permanently fixed to the fork
·· Protection plate at the fork tip
·· Less damages to the transported goods
8
Forks
TYPES
The unique twin
fork design WP
ensures a high ST
strength/low
weight ratio
Simplicity of design
means our product is low
maintenance and easily ST: For loads in double depth (one pallet)
installed WP: Without pallet stop (two pallets)
VERTICAL VERTICAL
SECTION
FITTED ON LOST CENTRE OF CENTRE OF TYPE
MIN MAX SIZE OUTER TYPE WITH
ISO MAX LIFT LOAD GRAVITY, GRAVITY, WEIGHT/ WITHOUT
CAPACITY LENGTH LENGTH FORK PALLET STOP
2328 TRUCK THICK- MIN MAX PAIR PALLET STOP
RETRACTED EXTENDED (WIDTH X (ST)
CAPACITY NESS LENGTH LENGTH (WP)
THICKNESS)
RETRACTED EXTENDED
kg/mm tonnes mm mm mm mm mm mm kg REF REF
2A 2500/600 1,8 1100 1850 139 x 57 45 370 530 178 100PS2605* 100PS2629*
2A 2500/600 1,8 1200 2050 139 x 57 45 415 600 190 100PS2606* 100PS2630*
2A 2500/600 1,8 1350 2350 139 x 57 45 480 710 206 100PS2607* 100PS2631*
2A 3000/600 3 1100 1850 139 x 62 50 355 500 172 100PS2608* 100PS2632*
2A 3000/600 3 1200 2050 139 x 62 50 417 590 180 100PS2609* 100PS2633*
2A 3000/600 3 1350 2350 139 x 62 50 463 665 198 100PS2610* 100PS2634*
2A 2500/600 2 1100 1850 169 x 57 45 395 580 178 100PS2611 100PS2635
2A 2500/600 2 1200 2050 169 x 57 45 435 655 190 100PS2612 100PS2636
2A 2500/600 2 1350 2350 169 x 57 45 515 770 206 100PS2613 100PS2637
2A 3500/600 3,2 1100 1850 169 x 57 45 370 545 191 100PS2614 100PS2638
2A 3500/600 3,2 1200 2050 169 x 57 45 415 615 202 100PS2615 100PS2639
2A 3500/600 3,2 1350 2350 169 x 57 45 485 730 218 100PS2616 100PS2640
3A 3500/600 3,2 1100 1850 169 x 57 45 370 545 191 100PS2617 100PS2641
3A 3500/600 3,2 1200 2050 169 x 57 45 415 615 202 100PS2618 100PS2642
3A 3500/600 3,2 1350 2350 139 x 57 45 485 730 218 100PS2619 100PS2643
3A 4500/600 4 1100 1850 169 x 57 45 370 545 191 100PS2620 100PS2644
3A 4500/600 4 1200 2050 169 x 57 45 415 615 202 100PS2621 100PS2645
3A 4500/600 4 1350 2350 169 x 57 45 485 730 208 100PS2622 100PS2646
3A 5800/600 5 1100 1850 169 x 62 50 314 450 233 100PS2623 100PS2647
3A 5800/600 5 1200 2050 169 x 62 50 354 512 245 100PS2624 100PS2648
3A 5800/600 5 1350 2350 169 x 62 50 415 610 264 100PS2625 100PS2649
4A 5800/600 5 1100 1850 169 x 62 50 314 450 233 100PS2626 100PS2650
4A 5800/600 5 1200 2050 169 x 62 50 354 512 245 100PS2627 100PS2651
4A 5800/600 5 1350 2350 169 x 62 50 415 610 264 100PS2628 100PS2652
·· * Single cylinder, recommended oil flow 15-25 l/min ·· The telescopic forks can be used in cold storage
·· Double cylinder, recommended oil flow 20-35 l/min applications down to -30 °C
·· Operating pressure (min-max): 160-250 bar ·· 1 hydraulic function required
·· Supplied with 1 hydraulic hose to connect the left-
hand fork to the right-hand fork
9
CAM System fork extensions
·· The existing fork must support at least 60% of the extension length
·· In conformity with ISO 13284
·· Material thickness: 6 mm up to fork section 150 x 50 mm
·· Material thickness: 8 mm starting from fork section 150 x 60 mm
·· Supplied with locking pin
·· Made in Europe
·· Other sizes on request
10
CAM System fork extensions
Fork length L
·· Fork extension length should not exceed ·· Supplied with locking pin
original fork length by more than 50% ·· Made in Europe
·· In conformity with ISO 13284 ·· Other sizes on request
·· Material thickness: 8 mm
11
CAM System weighing forks
WEIGHING FORKS
WEIGHT HEIGHT
FORK FORK DISTANCE
REF TYPE GRADU- CAPACITY ISO 2328 ABOVE
LENGTH WIDTH CLAWS
ATION CARRIAGE
kg kg mm mm mm mm
100PS2889 2500 economy 2 2500 2A 1150 133 68 418
100PS2890 2500 economy 2 2500 2A 1150 133 68 418
100PS2876 2500 economy 2 2500 2B 1150 133 68 418
100PS2891 2500 economy 2 2500 2B 1150 133 68 418
100PS2892 2500 performance 1-2 2500 2A/2B 1150 133 68 418
100PS2893 2500 performance 1-2 2500 2A/2B 1150 133 68 418
12
CAM System weighing forks
WEIGHING FORKS
Benefits
·· Low installation costs so lower initial expense and higher return on investment
·· Minimal displacement of load centre equals more lifting capacity
·· Excellent view of fork tips: more safety and less accidents
·· Scale components are easily accessible and digitally calibrated: less maintenance
·· Can be used in combination with fork positioners
DISTANCE
THICK- WIDTH
BETWEEN WIDTH HEIGHT THICK- WEIGHT
NESS OF FORK
CARRIAGE OF FORK OF STOP NESS PER EXTRAS
OF FORK BATTERY HEIGHT
AND STOP BASE PLATE FORK FORK
TIP PACK
PLATE
mm mm mm mm mm mm mm kg
80 15 100 55 90 58 59 67
80 15 100 55 90 58 59 67 Incl printer
80 15 100 55 90 58 59 67
80 15 100 55 90 58 59 67 Incl printer
80 15 100 55 90 58 59 67 ISO Calibration Certificate
Integrated power converter(*) + ISO Calibration
80 15 100 55 90 58 59 67
Certificate
Integrated power converter(*) + Thermal Printer +
80 15 100 55 90 58 59 67
ISO Calibration Certificate
Integrated power converter(*) + Bluetooth output for
80 15 100 55 90 58 59 67
communication with PDA + ISO Calibration Certificate
Integrated power converter(*) + Thermal Printer +
80 15 100 55 90 58 59 67
Legal for trade certificate
80 15 120 55 90 58 59 79 ISO Calibration Certificate
Integrated power converter(*) + ISO Calibration
80 15 120 55 90 58 59 79
Certificate
Integrated power converter(*) + Thermal Printer +
80 15 120 55 90 58 59 79
ISO Calibration Certificate
Integrated power converter(*) + Bluetooth output for
80 15 120 55 90 58 59 79
communication with PDA + ISO Calibration Certificate
Integrated power converter(*) + Thermal Printer +
80 15 120 55 90 58 59 79
Legal for trade certificate
100 15 140 55 90 73 74 119 ISO Calibration Certificate
Integrated power converter(*) + ISO Calibration
100 15 140 55 90 73 74 119
Certificate
Integrated power converter(*) + Thermal Printer +
100 15 140 55 90 73 74 119
ISO Calibration Certificate
Integrated power converter(*) + Bluetooth output for
100 15 140 55 90 73 74 119
communication with PDA + ISO Calibration Certificate
Integrated power converter(*) + Thermal Printer +
100 15 140 55 90 73 74 119
Legal for trade certificate
FORK HOOKS
REF 100PS2812
FEM 2
REF 100PS2813
FEM 3
REF 100PS2814
FEM 4
B
A
14
Positioning accessories
FORK CAMERA
Contains Contains
·· Wireless fork camera REF 100PS2269 ·· Wireless fork camera REF 100PS2269
·· Battery pack REF 100PS1311 ·· Battery pack REF 100PS1311
·· 7” monitor ·· 9” monitor
·· Wi-Fi system REF 100PS2875 ·· Wi-Fi system REF 100PS2875
15
Fork protection
Wear pad 75 mm wide (for fork width 100 mm) REF 100PS2278
Wear pad 100 mm wide (for fork width 125 mm) REF 100PS2279
Wear pad 125 mm wide (for fork width 150 mm) REF 100PS2280
Wear pad 175 mm wide (for fork width 200 mm) REF 100PS2281
Application
·· Thoroughly degrease and roughen up area where plate has to be fixed
·· Remove film from tape on the plate
·· Stick the plate onto the prepared area in one go (do not remove anymore)
·· Apply pressure by using the forks’ own weight and do not use for 24h
16
Load protection
SHOCK ABSORBER
REF 100PS2287
·· Dimensions: 400 x 50 x 50 mm
·· 4 magnets (39 kg pull force)
·· Material: copolymer 70° shore A
·· Overall strength: > 13 Mpa
·· Elasticity: 300 % Other dimensions
·· Temperature range: -40 °C to 100 °C REF 100PS2978
·· Weight: 1 kg ·· Dimensions: 450 x 100 x 50
·· Soft fibre top coat (to protect your load)
·· Fits on the forks of various machines: REF 100PS2979
lift trucks, reach trucks, stackers ... ·· Dimensions: 550 x 120 x 50
Detail
Polyurethane
protective
cover
Steel
fork
Fork
17
Load protection
Have a look on
tvh.tv to see this
product in action.
REF 100PS2272
Application
·· Shows the level of the forks at all times
·· Reduces potential damage: you don’t pierce
your product or racking
·· Eliminates the guess work thus increasing
productivity
Technical info
·· Installs in 2 minutes with double-sided tape
on any counterbalanced lift truck
·· Mounted on the left or right side of the mast
·· Does not need any calibration or
adjustments
·· Supplied with installation instructions
REF 100PS2273
The mast position display gives you an accurate
illustration of the position of the mast.
This sensor can avoid many problems due to
wrong positioning of the mast.
Main parts
·· Measuring sensor
·· LED display
Technical specifications
·· Measuring range: ± 9°
·· Accuracy: ± 0,5°
·· Voltage: 12-48 VDC
·· Current consumption: 400 mA
·· Operating temperature: -25 °C to 55 °C
18
Load protection
REF 100PS2308
Features:
·· Consistently shows whether or not a load is truly horizontal
·· Red/Yellow/Green lights for fast recognition
·· Makes work faster and easier
·· Reduces load, pallet and rack damage
·· Improves safety by reducing operator mistakes
Specifications:
·· Dimensions: 7,30 cm (L) x 5,71 cm (W) x 15,87 cm (H)
·· Weight (with batteries): 0,734 kg
·· Power source: 2 standard “D” alkaline batteries
·· Housing: rugged ABS box, stainless steel fasteners, nickel-coated rare-earth magnets, lean
labels
19
Fork blade Fork
Fork blade protector Fork
Load protection
protector
Rubber
Application:
The anti-scratch, anti-slip magnetic fork blade covers can be Have a look on
Metal
used for handling
core a wide range of loads. They can either be tvh.tv to see this
used where products product in action.
Magnetic layercould be damaged from contact with bare
forks or when confronted with a slippery load like cages or
metal boxes. Should not be used to handle wood pallets.
Fork blade protector
Features:
·· Only a few seconds are required for fitting or removal
·· Attaches instantly when positioned on metal lifting forks, due to magnetisation
·· Installation requires no mechanical or electrical work
·· Sticks securely to forks
·· Exists out of a 70 shore black rubber upper layer, a metal inner core and a bottom magnetic
layer
·· The capacity of the forklift truck does not get limited in any way
·· Delivered with user manual
·· Can easily be stored on the side of the lift truck when not in use
20
Load protection
FORK SHORTENER
REF 100PS2874
·· Prevents the fork tips from sticking out of the pallet and causing damage
·· Length: 400 mm
·· For use on forks of 100 mm wide
·· Material: shock-resistant plastic
·· Weight: 3 kg
Advantages:
·· Easy to install and remove (click system)
·· Lightweight
·· Magnetic (fits on the rear of the forks when not in use)
REF 100PS2980
Digital on-board hydraulic weighing scale, designed for forklifts to meet the industrial,
transport and warehousing weighing needs.
21
Load protection
LOAD CUSHION
100-110 mm 100PS2283
120-130 mm 100PS2284
150-160 mm 100PS2285
200 mm 100PS2286
22
Fork moving accessories
FORK-MOVING CARRIAGE
REF 100PS2288
To transport forklift forks of all FEM-types
FORK DOLLY
REF 100PS2289
·· Up to fork section 150 x 50 mm
23
Fork moving accessories
Use
·· Transport of ferro-magnetic material, flat or Have a look on
rounded tvh.tv to see this
·· Safe and easy product in action.
Design
·· Lever (on/off) with a safety lock
·· Bottom with flat surface for metal sheets
combined with a concavity for a better
contact with rounded surfaces
·· Movable hook to hoist at the top
·· The magnetic material consists of
neodymium
24
Maintenance, repair and operations
100
80
dangerous !!!
10 20 usage (%)
REF 100PS2294
TRAFFIC SIGN
REF 100PS2295
·· Dimensions: 100 x 150 x 800 mm
·· Improves traffic safety on‑site and on the
road
·· Weather‑resistant
·· Red/white
·· Made of foam
25
Accessories
REF 100PS2297
Designed for the lubrication of various
applications in all types of operating
conditions, but particularly where the
operation temperature is high and the use of
conventional lithium greases is limited.
·· 400 g
REF 100PS2296 ·· ISO 6743-9 L-XBEHB 2
·· 400 ml ·· DIN 51502 KP2P- 20
REF 100PS2298
·· Set of 3 sprays
·· The control is carried out using 3 products:
cleaner, penetrant and developer
·· 1 spray: 500 ml
26
Accessories
REF 100PS2302
·· Foreground: mixed REF 100PS2303
·· Background: white ·· Width: 80 mm
·· Diameter: 85 mm ·· Height: 140 mm
REF 31773321
An overview of all
safety products
related to signalling,
REF 100PS2306 general and your
·· Foreground: mixed personal safety.
·· Background: white
·· Diameter: 90 mm Interested? Order your copy.
27
Product specials
AT YOUR SERVICE
IN 37 LANGUAGES
info@tvh.com
TVH PARTS NV
Brabantstraat 15 • 8790 Waregem • Belgium
T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh.com • www.tvh.com