The document provides information about machining operations for turning a workpiece that is 100mm in length and diameter. It lists the clamped length as 15mm and end allowance as 0. Two tools are specified - a general turning and facing tool (#05) and a cutoff tool (#102). The machining operations include facing cuts, turning cuts at varying depths and positions along the workpiece length, and a cutoff operation at the end to separate the finished part.
The document provides information about machining operations for turning a workpiece that is 100mm in length and diameter. It lists the clamped length as 15mm and end allowance as 0. Two tools are specified - a general turning and facing tool (#05) and a cutoff tool (#102). The machining operations include facing cuts, turning cuts at varying depths and positions along the workpiece length, and a cutoff operation at the end to separate the finished part.
The document provides information about machining operations for turning a workpiece that is 100mm in length and diameter. It lists the clamped length as 15mm and end allowance as 0. Two tools are specified - a general turning and facing tool (#05) and a cutoff tool (#102). The machining operations include facing cuts, turning cuts at varying depths and positions along the workpiece length, and a cutoff operation at the end to separate the finished part.