Professional Documents
Culture Documents
FEATURES:
Specifically designed for OLT and
ONU, PON applications
Pass-through connection and
The PON meter is ideal for quick on- simultaneous measurement of all
site testing of all PON signals located PON signals without any
anywhere on the network. The device disruption in service
is capable of measuring the Filtered detectors for individual
concurrent upstream and signal measurement at each
downstream data via a pass-through wavelength
connection, with simulating software Upstream signal “Burst Mode”
management capabilities and detection for quick and easy
enhanced ruggedness. pass/warning/fail analysis
SPECIFICATIONS:
Model PON Meter
Measurement range 1310nm: +10~-35dBm/1490nm:+10~-50dBm/1550nm:+25~-
45dBm
Pass through loss <1.5 dB
Threshold sets 10
Data storage 100
Connector SC/UPC(or customize)
Auto power off Mo operation in 10 minutes (can be canceled), Low battery
energy
Battery change Yes
Accuracy +/-0.2 dB(burst signal:<0.5dB)
Connect to pc Optional Function
Manual calibration Yes
Operate time Above 36 hours
Weight and dimensions 6.9”x3.1”x1.7”/0.7lb(177x80x40mm/345g)
Environmental Conditions 0~95% Humidity, Non Condensing
Operating temperatures 14F ~ 122f (-10C ~ 50C)
Storage temperatures -13F ~ 158F (-25C ~ 70C)
www.lumicoregroup.com
ADSS Fiber, Drop Fiber, FTTx Multiclosure, PLC
Splitters, Fiber Accessories, Test and Measures