You are on page 1of 15

Sakura

Wind-Land
Wi d Land Collection
C llectio
Doll
ll Crochet
Croc t Pattern
a ern By Nywyn's
yn's Corner
Co n

Nywyn's Corner © 2023 // For personal use only.


"Sakura Doll" Pattern (or parts of it) may not be reproduced, distributed or resold, translated,
published, altered, shared or posted over (for sell or free).
Sakura Doll Windland Collection 01

Materials Abbreviations
Schachenmayr Catania // Scheepjes Magic Ring MR
Catona // 100% Cotton, 50g/125meters. Front Loop FL
Or any yarn you like that suits well Front Loops Only FLO
with amigurumi project. Back Loop BL
Hook size 2.0mm. (or size that suit Black Loops Only BLO
you and your yarn) Stitch/Stitches st/sts
Polyester fiberfill for stuffing. Single Crochet sc
10mm Safety Eyes x 2. Increase inc
Pins. Decrease dec
Yarn Needle. Half Double hdc
Scissor & Stitch Markers. Crochet
Scrap yarn in Black or Brown & Double Crochet dc
White to embroider eye details. Half Double/Double hdcinc/dc
9-10 mm round buttons x 3. Crochet Increase inc
6mm round beads. Triple Crochet tr
Optional - A piece of craft wire to Slip Stitch slst
put inside 2 arms, hot glue gun or Row/Round R
fabric glue. Chain Ch
Repeat instructions (…) x time
with times

Yarn Colors Suggested


White Catona No. 130
Skin Catona No. 236
Pink Catania No. 222
Light Pink Catania No. 426

Nywyn's Corner © 2023 // For personal use only.


"Sakura Doll" Pattern (or parts of it) may not be reproduced, distributed or resold,
translated, published, altered, shared or posted over (for sell or free).
Do not claim this pattern as your own.
When publishing the finished works, please give credit as “Pattern by Nywyn’s Corner” !
Thank you and have a great day !
Sakura Doll Windland Collection 02

Notes
★★★
Pattern is written in English using US TERM.
Skill Level : Advanced Beginner / Intermediate.
Doll size will be approximately 25cm height when using same yarn and hook size
suggested.
Clothes are removable.
Feel free to choose any yarns you want that suitable for amigurumi work, remember to
change the hook size too.
Different yarns and hook sizes may vary the product size.
Notes for details :

★ To make the neck more sturdy and prevent our doll from
a wobbly head, I crochet a Neck-tube and insert inside
doll's head and neck. Stuff firmly with fiberfill or you can
put a hard plastic straw or craft wire inside the Neck-tube
@nywynscorner
for more secure.

★ I put a piece of craft wire inside two arms and cross


@nywynscorner

through the chest so that the doll may change her pose. If
you don't find it suitable you can ignore the wire.

★ For the hair, I use fabric glue/hot glue to stick the hair
strands onto the head. This way is fast and convenient but
the weak point is that you may not repair anything later.
So if you don't like to glue, just sew them with yarn needle @nywynscorner

at the pinned spots.

Contact Information
Etsy : www.etsy.com/shop/NywynsCorner
Facebook : www.facebook.com/nywynsconer
Email : nywynscorner@gmail.com

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 03

1. Arms -•
1
With Skin yarn Make 2.
Work in spiral and do not stuff.
R1. MR, 6sc. (6)
R2. 6inc. (12)
R3 - R4. 12sc. (2 rounds 12)
R5. Sc, 4dc into 1 stitch, 10sc. (15)
R6. 3dec, 9sc. (12)
2
R7. 12sc. (12)
R8. 2dec, 8sc. (10)
R9 - R25. 10sc. (17 rounds 10)
Fasten off with long tail. Place a marker at the 3rd
stitch of the 1st Arm and another at the 8th stitch of
the 2nd Arm.

2. Neck - tube -•
With Skin yarn, work in spiral , do not stuff. 3
R1. MR, 6sc. (6)
R2. (sc, inc) x 3 times. (9)
R3 - R12. 9sc. (10 rounds 9)
R13. FLO, 9inc. (18)
R14. (2sc, inc) x 6 times. (24).
Fasten off.

3. Fox Ears Headband -•


★ Headband 4

Work with Pink yarn.


Ch31, skip 1 chain from hook, 29sc, 3sc into last
chain, work into the other side, 28sc, inc, slst to 1st
stitch, ch30, slst into 31st stitch of the Band, fasten
off and secure the end. (Pic. 04)

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 04

★ Ear Inner Part 5


Make 4 pieces in total, 2 in White & 2 in Pink.
MR, ch3, 3dc, tr, ch2, tr, 3dc into the MR.
Fasten off with 2 White pieces.
Do not cut yarn with 2 Pink pieces. (Pic. 05)

★ Ear Outer Part


Place 1 White piece & 1 Pink piece together, slip the loop of the Pink one through the
1st stitch of the White, continue to crochet through both loops of 2 pieces. (Pic. 06)
Ch1, sc, 2inc, sc, 3sc into ch2 space, sc, 2inc, sc.
Fasten off with long tail.
Work the same with the rest 2 pieces. Sew the Ears to the Headband as shown in
photo. (Pic. 08)

6 7 8

6 sts

4s
ts
ts
4s

4. Sakura Flowers -•
★ 1st Flower
Start with White yarn,
R1. MR, 5sc, slst to 1st stitch. (5)
Change to Light Pink yarn.
R2. (Ch2, 1dc, ch1, slst on the top of the dc stitch, 1dc, ch1, slst on the top of the dc
stitch, 1dc, ch2, slst) into 1 stitch of R1 x 5 times. (5 petals)

9 10 11

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 05

★ 2st Flower
Start with Pink (or Light Pink) yarn.
Work the same as R1 & R2 of the 1st Flower, change the Petals into White.
Make a chain of 12 chain, sew to the back of the 2nd Flower as a ring chain. (Pic. 13)

12 13 14

5. Legs -•
Start with White yarn, make 2.
15
Make a foundation chain of 7ch, start in 2nd chain from
hook and work around the chain in spiral.
Stuff firmly as you go.
R1. Inc, 4sc, 4sc into last chain, 4sc, inc. (16)
R2. 2inc, 4sc, 4inc, 4sc, 2inc. (24)
R3. 3sc, inc, 4sc, inc, 6sc, inc, 4sc. inc, 3sc. (28)
R4 - R5. 28sc. (2 rounds 28)
R6. 8sc, 6dec, 8sc. (22) 16

R7. 7sc, 4dec, 7sc. (18)


R8. 2sc, dec, 4sc, dec, 4sc, dec, 2sc. (15)
R9 - R14. 15sc. (6 rounds 15)
R15. Change to Skin yarn, BLO, 15sc. (15)
R16 - R33. 15sc. (18 rounds 15)
R34. 4sc, change to White yarn, 11sc. (15)
R35. 15sc. (15)
17
R36 of 1st Leg. Only 1sc, slst. Fasten off.
R36 of 2nd Leg. 10sc, slst. Do not cut yarn.

★ Socks Ruffle : Join White yarn into the FL round that


left from R15 of the Legs. (Pic. 17)
Ch1, (sc ch1) x 15 times, slst to close the round.
Fasten off and weave in ends.

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 06

6. Body -•
Continue to crochet from R36 of 2nd Leg, after the slst Start of
R1

chain 4, slip into the slst at the end of R36 of 1st Leg. 15sc on 15sc on
2nd Leg 2nd Leg
The next single crochet that worked on the 1st Leg will
be the beginning of R1 of the Body.
Work in spiral and stuff as you go.
18
4 chain

R1. 15sc on 1st Leg, 4sc on ch4, 15sc on 2nd Leg, 4sc on
the other side of the ch4. (38) (Diagram)
R2. Inc, 6sc, inc, 18sc, inc, 6sc, inc, 4sc. (42) (Pic. 19)
R3 - R6. 42sc. (4 rounds 42)
19
R7. (5sc, dec) x 6 times. (36)
R8. 36sc. (36)
R9. Change to Skin yarn, 36sc. (36)
R10. (2sc, dec) x 9 times. (27)
R11. Dec, 25sc. (26)
20
R12 - R18. 26sc. (7 rounds 26)
Next round we will assemble 2 Arms to the Body.
R19. 7sc on Body, 10sc around the 2nd Arm start from
the marker, 14sc on Body, 10sc around the 1st Arm start
from the marker, 5sc on Body. (46) (Pic. 21)
R20. 5sc, dec, (10sc, dec) x 3 times, 3sc. (42) 5sc + 7sc 21

R21. 5sc, dec, 8sc, dec, 10sc, dec, 8sc, dec, 3sc. (38)
R22. 3sc, dec, 5sc, dec, (4sc, dec) x 3 times, 5sc, dec,
10sc 10sc
sc. (32) 14sc

R23. (2sc, dec) x 8 times. (24)


R24. (2sc, dec) x 6 times. (18) 22

R25. (sc, dec) x 6 times. (12)


R26 - R29. 12sc. ( 4 rounds 12)
Do not cut yarn.
24
#Tips : After assembled, if there
23
are holes under the Armpits, grab
your yarn needle and the long tail
of the Arms, stitch over the holes
to close it. (Pic. 24)

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 07

7. Head -•
Continue to crochet up from R29 of Body.
Work in spiral and stuff firmly as you go. 25
R30. 12inc. (24)
R31. (sc, inc) x 12 times. (36)
R32. (5sc, inc) x 6 times. (42)
R33. 3sc, inc, (6sc, inc) x 5 times, 3sc. (48)
R34. (7sc, inc) x 6 times. (54)
R35 - R48. 54sc. ( 14 rounds 54)

Use a chopstick or anything you feel suitable to push the Neck tube into the neck,
downward the body, until the neck tube's top part touches the bottom of the Head.
Stuff the neck tube firmly (or you can insert a piece of craft wire or plastic hard
straw to have the neck more secure) (Pic. 25)

Insert Eyes at R39 R40, with 9 sts apart. (Pic. 26)


Split a piece of dark 4 ply yarn into thinner strands.
Embroider Eyeliners with 3 strands. (Pic. 27)
Eyelashes and Eyebrows with 2 strands. (Pic. 28)
Eyebrows will be 5 sts width and 1 round height at R43 R44. (Pic. 28)
Add a piece of White yarn to cover the bottom of the Eyes. (Pic. 29)
Nose at R38 R39 between the Eyes, over 3 sts. (Bullion stitch is optional) (Pic. 30)

R49. (7sc, dec) x 6 times. (48)


R50. 48sc. (48)
26 27
R51. (6sc, dec) x 6 times. (42)
R52. (5sc, dec) x 6 times. (36)
R53. (4sc, dec) x 6 times. (30) 9 sts

R54. (3sc, dec) x 6 times. (24)


R55. (2sc, dec) x 6 times. (18)
R56. (sc, dec) x 6 times. (12)
R57. 6dec. (6)
Fasten off and leave long tail.
Pass the tail through 6 front loops of R57 and pull tightly to close the hole. Hide tail
inside.
Sakura Doll Windland Collection 08

28 29 30

8. Hair -•
Use Light Pink yarn for Hair, make a total of 2 layers. 31
After finished all the layers, the Hair will be assembled
onto the Head with . You should finish all 2 layers before
attaching them to the head.

★ Base
R1. MR, 6sc. (6)
R2. 6inc. (12)
R3. (Sc, inc) x 6 times. (18) 32

R4. (FLO, 2sc, inc), (2sc, inc) x 2 times, (FLO, 2sc, inc),
(2sc, inc) x 2 times, slst to 1st stitch. (24) (Pic. 32) 3 back loops

Continue to crochet the hair strands.

★ First Layer
Total 24 strands. (Pic. 34)
S1 - S5. Ch22, skip 1ch, work into 2nd chain, sc, 20hdc,
33
slst to next stitch on the Base.
S6 - S8. Ch40, skip 1ch, work into 2nd chain, sc, 38hdc,
slst to next stich on the Base.
S9. Ch25, skip 1ch, work into 2nd chain, sc, 23hdc, slst
to next stich on the Base.
S10. Ch20, skip 1ch, work into 2nd chain, sc, 18hdc, slst
to next stich on the Base.
S11 - S14. Ch12, skip 1ch, work into 2nd chain, 11hdc, slst
to next stich on the Base.
S15. Ch20, skip 1ch, work into 2nd chain, sc, 18hdc, slst
to next stich on the Base.

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 09

S16. Ch25, skip 1ch, work into 2nd chain, sc, 23hdc, slst 34
to next stich on the Base.
23
24
1
22

S17 - S19. Ch40, skip 1ch, work into 2nd chain, sc,
21
2
3
20
4

38hdc, slst to next stich on the Base.


19 5
18
17 6

S20 - S24. Ch22, skip 1ch, work into 2nd chain, sc,
7
8
14
13 11 9
16 15 12
20hdc, slst to next stitch on the Base. Fasten off. 10

★ Second Layer
Join Light Pink yarn and crochet into 6 back loops that
left from R4 of the Base. Each loop will have 2 strands, 35
we will have 12 strands in total with right side facing up.
(Pic. 36)

BL groups 1

S25 - S30. Work into the 1st BL group. BL groups

Ch30, skip 1 ch, work into 2nd chain, 29sc, slst into
same loop, ch30, skip 1ch, work into 2nd chain, 29sc,
slst to next loop.
36
Repeat 2 times and slst into the same last loop with
S30. Fasten off.
28 27
29 26
30 25

S31 - S36. Worked into the 2nd BL group.


Ch30, skip 1 ch, work into 2nd chain, 29sc, slst into 31
32 36
33 35
same loop, ch30, skip 1ch, work into 2nd chain, 29sc, 34

slst to next loop.


Repeat 2 times and slst into the same last loop with
S36. Fasten off.

★ Assembly
Tie all strands of the 2nd Layer up to separate with the 1st Layer, place the 1st Layer
onto the Head with wrong side facing up.
Secure the strands of the 1st Layer as shown in photos by pins, then slowly unpin each
strand to apply hot glue/fabric glue, attach on the back of the Head. (Pic. 37 39)
Place S9 & S16 apart from the Eyelashes 2 sts. (Pic. 40)
S8 will be attached onto S7, S18 onto S17. (Pic. 41 42)
After finished with the 1st Layer, untie the 2nd Layer and work with the Fox Ears
Headband. Wear the Headband on top of the Head between the 2 groups of 2nd Layer
hair strands and secure it as shown in photos. (Pic. 43)
Leave the Bang (S10 S16) unattached to have natural looking. (Pic. 44)

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 10

Gather 12 strands of the 2nd Layer again, tie the strands tightly up on the Head using
a piece of Light Pink yarn. (Pic. 44)
Make 2 braids from (S6, S7, S8) & (S17, S18, S19). Place the braids on the nape of the
Head. (Pic. 45 47)
Fix the Bang to sides of the Head as shown in photos. (Pic. 48 50)

37 38 39

4 3 2 1 24 23 22 20 21 20 19 16
9 6 5 4 3

40 41 42
16

7 8 18
6 19
17

43 44 45

46 47 48

49 50

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 11

9. Dress -•
Start with Pink yarn.
Chain at the beginning of R does not count as a stitch.
R1. Ch38, skip 6ch to make a button hole, work into the 7th chain , 32sc. (32)
R2 - R6. Ch1, flip your work, 32sc. (5 rows 32)
R7. Ch6 to make a button hole, flip, 32sc. (32) (Pic. 52)
R8. Change to White yarn, 32sc. Fasten off. (32)
★ First Layer
Do not flip, join Pink yarn into the 1st FL of R8.
R9. Ch2, FLO, 32dcinc, slst into 1st stitch. (64) (Pic. 53 54)
R10. Ch2, (dc, dcinc) x 32 times, slst. (96)
R11 - R12. Ch2, 96dc, slst. (2 rounds 96)
Change to Light Pink yarn.
R13. Ch1, (3sc, ch2, slst on top of the sc) x 32 times, slst. Fasten off. (Pic. 55 56)
★ Second Layer
Join White yarn into the 1st BL of R8, continue to crochet R14. (Pic. 57)
R14. Ch2, BLO, 32dcinc, ch2, slst into the same last stich. Fasten off. (64)
Join White yarn again into 1st stitch of R14, continue to work R15.
R15. Ch2, (dc, dcinc) x 32 times, slst. (96)
R16 - R18. Ch2, 96dc, slst. (3 rounds 96)
R19. Ch1, (sc, ch1) x 96 times, slst. (Pic. 58)
Fasten off and weave in ends.

51 52 53

54 55 56

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 12

57 58 59

★ Halter Part & Sleeves


Join White yarn into the other side of the foundation chain of the Dress to make the
Halter. (Pic. 60 61)
R1. Ch1, 11sc, 2hdc, 6dc, 2hdc, 11sc. (32)
Fasten off and join Pink yarn into 1st stitch of R1 to crochet R2. (Pic. 62)
R2. Ch1, 7sc, ch10, skip 2 sts, 14sc, ch10, skip 2 sts, 7sc. Fasten off.

Join Pink yarn into the 10th chain of each ch10 that made at R2 to make the Sleeves.
Work the same for the 2 Sleeves. (Pic 63 64)
Ch2, (dcinc, 3dc in 1 stitch) x 5 times, ch2, slst into the same last chain. (25)

Make a chain of 80 chain, fasten off. (Pic. 65)


Pass 2 tails of the chain through 2 stitches at center of R2 as a Halter Strap.
Tie them on the back of the Neck. Sew buttons as shown in photo. (Pic. 66 67)
Attach the 1st Sakura Flower on the front of the Dress. (Pic. 68)

60 61 62

63 64 65

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 13

66 67 68

10. Shoes -•
Start with Pink yarn, make 2.
Work a foundation chain of 8ch, skip 1ch from hook and start into 2nd chain, work in
spiral.
R1. Inc, 5sc, 4sc into last chain, 5sc, inc. (18)
R2. 2inc, 5sc, 4inc, 5sc, 2inc. (26)
R3. (sc, inc) x 2 times, 5sc, (sc, inc) x 4 times, 5sc, (sc, inc) x 2 times. (34) (Pic. 67)
Change to Light Pink yarn.
R4. BLO, 34sc. (34)
R5 - R7. 34sc. ( 3 rounds 34)
R8. 8sc, 9dec, 8sc. (25)
Change to Pink yarn.
R9 of 1st Shoe. 7sc, ch16, skip 6ch to make a button hole, work into 7th chain from
hook, 10slst on the chain, 11slst on the shoe, 7sc. Fasten off.
R9 of 2nd Shoe. 7sc, 11slst, ch16, skip 6ch to make a button hole, work into 7th chain
from hook, 10slst on the chain, 7sc on the shoe. Fasten off.

Join Pink yarn into the FL round that left from R4 to crochet the Outsole. (Pic. 72)
Ch1, 34sc, slst to close the round. Fasten off. (34)
Sew 6mm round beads to the Shoes as buttons.

69 70 71

Sakura Doll © 2023 Nywyn's Corner


Sakura Doll Windland Collection 14

72 73

Here is the end of the pattern. Thank you for your purchasing. I would love to see your
finished Sakura, so please tag me @nywynscorner on Instagram and share with me your
picture ^ ^
From Nywyn with love ♡

Sakura Doll © 2023 Nywyn's Corner

You might also like