You are on page 1of 13
UU rovided in 1 door is generally PI cinema halls. (a) Louvered (B) Flush (@) Sliding (D) Revolving the first Storey’ of building is 2. Iheight of vm, the number 3.2 m and riser is 13 © of treads required is (a) 12 @ 18 ie) ‘24 (D) 30 3. The ___ which help in securing the head of door frame to the masonry are called horns. _ JAY horizontal projections (6) vertical projections (C) inclined projections (D) None of the above 4. The slope of stairs should never exceed ‘and should not be flatter than ___. (a) 50°, 25° <8) 40", 25° {C) 40°, 20° (D) 50°, 20° ‘AE/C/RT/22 EXAM. 2022/168-D we ‘Upper part of a nd of ais calla, The triangular (A) curved roof (B) flat root (C) shed roof (0) pitched roof In one day brick masonry should not be raised more than (A) 05m (8) 15m () 20m (D) 25m A brick masonry bond consisting of ‘aiternative courses of headers and stretchers, is called (A) stretcher bond (®) Flemish-bond (C) header bond _{D) English bond ‘The shear strength of a soil (A). is directly proportional to the angle of internal friction of the soil (8) is inversely proportional to the angle of internal friction of the soil (C) decreases with increase in normal stress (D) decreases with decrease in normal stress Se C4 O4mb ee (A) 0-53 ®) o62 (© o7g ©) oa5, 11. The bearing capaci . Pacity of a Soil depends Upon the ¥ » Sepen (4) size of the Particles (8) shape of the Particles (A) liquid limit 8) Plastic limit (C) shrinkage limit (D) None of the above AE/C/RT/22 EXAM. 2022/168-D ted sample of soil hag rtially saturat 13. Apal 14. The effective angle of 1s. 16, it weight of 20 g/cm? and specife aewity of soil particles is 26. If the froisture content inthe sof 18.20%, the (A) 20% ; (B) 77% 4, © 92% (D) None of the above shear resistance as the size Of particles _ UAY increases, increases ©) increases, decreases (©) decreases, increases (D) None of the above The vane shear test is sed for the in ait determination of the undraine Strength of the intact fully saturated (A) sands BY clays (©) gravels (©) highly organic soils table rises up to ground dent©e: then the effective stress due to —— in pore water pressure but = total stress (A) reduced, decrease, does ‘not change 8) reduced, increase, does not change (©) reduced, decrease, decreases (©) reduced, increase, decreases [p.T.0. 17. i an of permeability of soil _— ec in temperature. A) increases, increase (B) decreases, increase (C) increases, decrease {D) None of the above tailed estimate 18. While preparing 4 de' (A) dimension should be measured correct to 0-01 m (B) area should be measured correct to 0-01 sq.m (C) volume should be measured correct to 0-01 cum _(D) All of the above 19. While estimating & reinforced cement structure the omitted Cover of concrete fe assumed at the end of reinforcing bar, not less than or ce diameter of the bar. (a) 12 mm, twice (B) 25 mm, thrice (C) 12 mm, thrice (D) 25 mm, twice 12mm thick cement plastering 1 : 6 on 100 sq.m new brickwork, the quantity of cement required, is yon 20. For too (a) 0200 m? (p) 0247 m° (0274 m? (Dp) 0-295 m* ap/o/R1/22 EXAM. 2022/168-D Av a1. 22. The quantit 23. In analysis of rate, the quantity of a, of ty mortar for 10 cubic metre brickwork ke ig taken as (A) 3m? (B) 10m (© 1m? (D) 0:3 m? ty of partition walls and honeycomb walls are worked out in (A) m By m? (o) m° (D) lump sum For 100 aq. cement conerete (1 : 2: 4 ithe quantity of cement 4m thick floor, required is (a) 0:90 m? By 0-94 m® (C) 0:98 m® (p) 1-00 m® The __— includes the area of the balcony up to 50%. (A) carpet area (8) built-up area (©) floor area (D) plot area 25, 26. 27. oe Plinth area of a building includes e (A) area of the Walls at the floor level ®) JiR and wan excluding landing (©) area °f cantilevered porch (©) Both (A) ana (a) Pick up the correct statement weeding the centre tine method of estimating i (A) Product of the centre line of the Walls and area of cross-section of any item, gives total quantity of the item ®) The cen: © (A) floor, carpet ®) carpet, floor (C) floor, built-up jon should preferably be ¢ section 8! Box tyPe fpcea where occure us (a) compression (6) tension (C) torsion (D) None of the above 29. in a steel column sho designed to resist shear force 2:5% of the column load, uld be due to (A) Shear lags _-@Y Lacing bars (C) Lug angles (D) Ties 30. In moment resistant connections, the oment resistance of riveted connection depends upon AAS shear in rivets (8) compression in rivets (C) tension in rivets (P) strength of rivets in bearing The maximum slenderness ratio of a compression member subjected to dead load and live load is Wy i80 (B) 250 (©) carpet, built-up AE/C/RT/22 EXAM. 2022/168-D (©) 350 ) 400 z (P70. 82. As per IS : 800, the efficiency of a__ having the minimum pitch is 60%. (A) butt joint asl ag oh B) bolted joint \ (C) riveted joint (D) welded joint 33. ____ web stiffeners are used in plate Birder to avoid buckling of web plate. (A) Horizontal @) Inclined (©) Vertical (0) Vertical and horizontal 34, High strength bolts are the most suitable type of bolt when the bolts are subjected to (A) decrease in stresses (8) increase in stresses _{) reversal of stresses (D) None of the above 35. A tri-axial shear test is preferred to direct shear test, because (A) it can be performed under all three drainage conditions with complete control 8) stress distribution on the failure plane is non-uniform (C) precise measurement of pore pressure and change in volume during test is not possible (D) None of the above ‘AB/C/RT/22 EXAM. 2022/168-D 36. Load on connection is not eccentric for (A) lap joint {B) single cover butt joint (C) welded joint (D) None of the above 97. Effective diameter of rivet is equal to (A) rivet hole diameter (B) nominal diameter of rivet (C) 15 times of rivet hole diameter (D) 1:5 times of nominal diameter of rivet 38, The partial safety factor for strength of ___at limit state of collapse is 1-15. (A) steel (8) concrete (C) aggregate (D) None of the above Ted Te CT 39. Ifthe ___ in an RCC beam is greater than ____, shear reinforcement shall be provided. __lAy nominal shear stress, design shear stress (B) nominal shear stress, maximum shear stress (C) design shear stress, nominal shear stress (0) design shear stress, maximum shear stress 40. ty 8 rei, failure MOrceg Te str, Oncrete Compr, si Of Strain o8!n beam, if the choterete in bending im tee HES earticr thn yield pated” “Sl the benny sm elt A) Watanee ©) critica SPacing op transverse mi Which of gent OF cohamn is decided by ‘owing considerations? (©) None of the above 42, (C) 192 mm = atin SE Hee Choe +12)760 mm Mex =e. (A) beam JB)}-columa (O) slab (©) rectangular beam AE/C/RT/22 EXAM. 2022/168-D eee ts nt bars of @ it at suitable Festangull Dee jnforcement. * re aces - a bent down, shea ear bent up, § an bent down, compression a (p) bent up, compression cup the correct statement from the 8. Pick up the - following + : (A) Alternate bars are curtailed at 1th of the span of simply 7 supported beam (8) Alternate bars are curtailed at Ain of the span of simply 7 , supported slab (©) Alternate bars are curtailed at tm of the span of simply supported beam (0) Alternate bars are curtailed at den of the span of simply supported slab 46. The steel is generally used in RCC work (A) stainless steel (8) high carbon steel (©) high tension steet UD}-mild steel 47. Limiting value of ratio of depth of neutral axis to effective depth for Fe-415 Erade of steel as per IS : 456-2000 is (A) 0:53 8) 0-46 (C) 0-56 By 0-48 [P.T.0. 48. For RCC bridges, the smallest span beyond which the impact factor #® same for class ___ loading (wheeled vehicles) is 12 m. (A) AorB (B) AA (C) 70R {D) All of the above 49. The ___ gradient for vertical profle of a road is ruling gradient. (A) maximum design (B) minimum design (C) exceptional design (D) critical design i tion 50. The equilibrium supereleva' required to counteract the centrifuga} force fully for a higher circular cw of radius R and design sree Vis ae a A) O75 ve ®) 7sr (o75vP ( “ja7R av? 127R 51. California bearing ratio is a (A) method of soil identification (B) measure to indicate the shear strength of lateral confinement - _[0) measure to indicate the strength of soil (D) measure to indicate the relative strengths of paving material E/C/RT/22 EXAM. 2022/168-D 8 52. If the aggregate j percent, then tect value ig satisfactory for road su, staat fied ag (A) 10 to 20 : (B) 20 to 30 (C) 30 to 40 (D) 40 to 50 53. A bitumen primer is a___ cutback, (A) low viscosity (B) medium viscosity (C) high viscosity (D) None of the above 84. The camber of shoulders in water bound macadam roads is (A) zero (B) less than the cross slope of pavement (C) more than the cross slope o pavement (D) None of the above 55. The ductility value of bitumen fo suitability in road construction shoul 50 cm. (A) be equal to (B) be less than iver be less than (D) None of the above (4) Friction pites ©) End bearing pites (C) Tension pites () None of the above 57. Botto: Known most layer of pavement is (A) base course (8) sub-base course (C) subgrade (D) wearing course 58. The measure of absorption or scattering oflight by the___ present in the water is known as turbidity. (A) dissolved solids _JB)-Suspended solids (C) total solids (D) All of the above 59. Bearing capacity of soil should be calculated from the criteria of {A) compaction only (B) settlement only (C) compaction and settlement (D) shear and settlement AE/C/RT/22 EXAM. 2022/168-D is generally used for (p) Lime (©) Ferric chloride (p) Bleaching powder 61. Biological action is used in (a) tricking filter (B) grit chamber (C) screens (0) sedimentation tank ‘The gases given out of a septic tank are 62. (a) CO, +50, +N (B) CO, +PH, + NH, JOC, + CH, +H, (D) CH,+0,+H, assumed while Detention time is 20 minutes. designing a (A) flocculator (8) coagulation tank (C) rapid sand filter (D) slow sand filter 64. In sewage treatment plant, the oil and grease are removed by (A) oxidation (8) filtration (C) screening ~—(0) skimming [P.7.0. 65. In a centrifugal pump casing, the flow of water leaving the impeller is _ SAY radial (B) centrifugal (C) rectilinear (D) None of the above As per IS : 456-2000 for the design of reinforced concrete beam, the ~—— depends on the grade ‘of concrete CAAy maximum allowable shear S125 um allowable bending (8) maxim’ stress (C) maximum allowable normal stress wable bending stress (D) minimum allo’ 67. ‘The shear force of diagram of a loaded simply supported beam is shown in the figure below. The maximum bending moment in the beam is 14kN 2kN im A 2m ~13 kN -19 KN (A) 16 kNm (8B) 28 kNm (C) 36 kNm (D) 8kNm /RT/22 EXAM, 2022/168-D 10 ‘A vertical load of 10 kN acta on a hi jocated at a distance of £/4 from fa roller support O of a beam of engi face figure). The vertical renetion support Qis at 10 kN r§——tgs kaya Gy! 3 L/4 L/4 t k—— 1 ——9 (a) 00 kN P (6) 25 kN _AOy 75 en (D) 10:0 kN 69, Astructural member subjected to__ has both translation and rotation restrained at one end, while only translation is restrained at the other end. As per IS : 465-2000, the effective length factor recommended for design is 08. (a) tension spr compression (C) shear (D) torsion As per the provisions of IS : 456-2000, if the long-term static modulus of elasticity is 10000 MPa, then the creep coefficient of M-25 concrete is warts © soueFe Ect 6 @®) 30 * (45 {yood (D) 60 4, A soil has a bull Unit weight of 1. and water co; y 71. The highway bridges shall not be 20:22 N/a cine content nt 15%, Considered to be carrying any live load Caleulate dries to a unit ol When the wind velocity at deck level which partially dries to a unit weight bata of 19:42 kN/m and voids ratio remaing unchanged, >... n 7 () 50 tm/hr (A) 8% ? | ve ®) 70 kmyhr By 11% (C) 20% LS} 230 km ‘ Yas (D) 23% AL Cy

You might also like