Professional Documents
Culture Documents
My Scans
My Scans
htm
Ramp Help
Naming Your Scans and Running Batch Scans
This feature allows you to save your favorite chart pattern scan setups by name and run them one at a time or the
entire list of scans all at once as a batch. There is no limit to the number of scans you can save or run as a batch.
Each control on the form is described in detail below.
Delete Scan
To delete a scan, click on the scan name in the list that you want to delete. After you have selected the scan, click on
the "Delete Scan" button and the selected scan will be deleted. Be careful because there is no way to recover a deleted
scan.
Load Scan
You can select any scan from the list and then click on "Load Scan" to load all settings for that scan. The settings for
the scan will be shown as they were saved on all forms.
1 of 2 09/01/2017 11:54
My Scans http://www.ramprt.com/help-files/My-Scans-And-Batch-Scans.htm
Run Scan
You can run a selected scan from the list directly from this form. Simply click on any scan name and then click the
"Run Scan" button.
2 of 2 09/01/2017 11:54