You are on page 1of 9

Machine Translated by Google

DIGITAL RADIO WITH USB AND CARD READER


RF-49-USB

MANUAL
Machine Translated by Google

1. Screen 2.
Power on/off (ON/OFF)
3. MP3/Radio
4. Mem / Play / Pause / Search 5.
Previous
6. Next 7.
Volume Control 8. “0” /
Adjust Button 9. TF
Card Slot 10. USB Connector
11. Number Buttons
12. FM Antenna 13. Aux-
in Jack 14.
Headphone
Output 15. Card Slot SD/
MMC 16. DC 5V micro USB
connector
Machine Translated by Google

OPERATING INSTRUCTIONS
Batteries
Open the battery compartment and insert the batteries as indicated in the compartment.
Rechargeable Li-ion 3.7V battery (included).

Battery Charging
Connect the device by inserting the USB cable into the DC 5V IN input and insert the
other end into the USB charger port. Charging time is about 3 hours. The charging
indicator will flash while the battery is charging.

To use a 5V AC/DC adapter for external DC charging, plug the connection cable into
the DC input. (Voltage adapter is an optional accessory. Do not charge the battery
with AC/DC adapter for more than 24 hours.)

IMPORTANT If
the device has not been used for a while, the rechargeable battery may be completely
discharged in a kind of “rest mode”. This is a feature of all rechargeable batteries.
To recharge it (wake it up), it is recommended to charge it for a period of 5 hours, but
not exceeding 24 hours.

Radio
1. Press the power button (2) for 2 seconds to turn on the device.
2. Press the Previous (5) or Next (6) button to search for the stations.
4. Adjust the volume by pressing Vol- and Vol+.
5. Press the power button (2) for 2 seconds to turn off the device.

Preset Radio (Auto-Scan)


1. Press the Play / Search button (4) for 2 seconds to start Auto-Scanning of the
stations. It will stop automatically when it finds all the stations.

2. Press the Adjust button (8) for one second until P01 appears.
3. Press the Previous or Next button to select the Preset stations.

Program the Radio


1. Tune to the desired station.
2. Press the Play/Pause button (4) once to enter programming mode. “P01” will be
displayed on the screen. Press the Previous or Next buttons to select the stored position
“P02” “P03”…, and press the Play/Pause button again to confirm.

3. Press the Set button (8) for one second until P01 appears.
4. Press the Previous or Next button to select the stations
scheduled.
Machine Translated by Google

Enter a Radio Station Press the


number buttons to directly enter the frequency number of the desired station. The
device will immediately tune to that station.

To improve reception:
Remove the aerial telescopic antenna. To improve FM reception, tilt or rotate it, reduce
its length if the FM signal is too strong (too close to a transmitter).

PLAYBACK USB, SD/ MMC CARD, TF CARD This device can


play all MP3 files stored on a memory device with a USB connector, SD or
MMC card slot and TF card.

1. Press MP3/Radio (3) once to enter MP3 mode.


2. Before connecting the USB device to the device, make sure the port is facing the
correct direction and connect it. Or insert a SD/MMC/TF card directly without bending it.

3. The system will automatically start reading MP3 files from the USB device,
SD or MMC Cards or TF Card.
4. Press the Next (6)/ Previous (5) / PLAY (4) buttons for Previous / Next or Play
functions.
5. Press the number buttons to directly enter the desired track number.

Connecting a USB device incorrectly, or placing the SD/MMC/TF card


upside down may damage the device or those devices. A locked SD/MMC/TF card
cannot be detected or played.

SPECIFICATIONS
Power 1W RMS
Entrance: DC 5V
Rechargeable battery: DC Li-ion 3.7V 600mAh

PRECAUTIONS:
1. Do not expose the device to extreme temperatures or high humidity to ensure
correct and long-lasting operation.
For example, never place the appliance in bathroom areas, or near stoves and
radiators.
2. If you think that the appliance is not working properly, please take it to your nearest
repair service. Do not try to repair it yourself.
Machine Translated by Google

WARNING:
To prevent the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
To avoid electric shock, do not open the cover of the appliance, always contact the
brand's technical service or qualified repair center.
There may be a danger of explosion if the battery is inserted incorrectly.
Replace only with the same or equivalent type of batteries.

Waste Disposal Do not


dispose of batteries with household waste. The law requires you to recycle them.
You can dispose of them at public collection points or at any establishment dedicated
to this type of product. For environmental protection, devices at the end of their useful
life should not be disposed of with household waste. Use the appropriate collection
points.

Warranty conditions:

- This product has a 3-year warranty from the date of the purchase invoice.

Recycling and disposal of the product:


This product has been designed and manufactured with high quality, recyclable and reusable
materials. The symbol drawn below indicates that, at the end of its useful life, electrical and
electronic equipment must be disposed of separately and must not be disposed of together with
household waste. Please dispose of this product at a recycling/waste collection point.

Device Made in RPC Imported by

River International SA

Contact details ELBE Spain After-Sales Service:

Contact email: sat@riverint.com Contact telephone: 93 262 42 68 Web:


www.elbeproducts.es
Machine Translated by Google

USB SD TF DIGITAL RADIO


RF-49-USB

INSTRUCTION MANUAL
Machine Translated by Google

1. Display
2. Power ON/OFF 3.
MP3/Radio 4.
Mem / Play/Pause / Scan 5.
Previous 6.
Next 7.
Volume Control 8.
Numerical Keys “0” / Adj 9.
USB Connector 10.
TF Card Slot 11.
Numerical Keys 12.
FM Antenna 13.
Aux-in Jack 14.
Headphone Jack 15.
SD/MMC Card Slot 16.
DC 5V USB Cable connector
Machine Translated by Google

OPERATING INSTRUCTION
Battery Supply
Open the battery compartment and insert as indicated in the compartment one
Rechargeable Batteries, Li-ion 3.7V

Battery Charging
Connect the unit by inserting the USB cable into DC 5V IN jack, and inserting the
other end into the USB interface or USB charger. The charging time is around 3
hours. The charging indicator will flash during battery charging.

To use 5V AC/DC adapter for external DC charging, plug the connecting cable to the
DC jack. (Voltage adapter is an optional accessory. Do not charge the battery with
the AC / DC adapter for more than 24 hours.)

IMPORTANT
If the unit has not been used for a long period of time, the rechargeable battery may be
completely discharged into a “sleep mode” condition. This is the characteristics of all
the rechargeable batteries. For the first time to recharge (to wake up) the battery, it is
recommended to charge for a period exceed 5 hours but not exceed 24 hours.

Radio
1. Press Power button for 2 seconds to switch on the unit.
2. Press Next or Previous button for a second to start radio scanning.
3. Press Adj. button for 2 seconds, and then press Next or Previous button to adjust
the radio frequency.
4. Adjust the sound volume by pressing Vol- & Vol+.
5. Press Power button for 2 seconds to switch off the unit.

Radio Preset (Auto-Scan)


1. Press Mem / Play Button / Scan for 2 seconds to start Auto-Scan Preset Stations.
It will auto-stop when all the stations have been found out.
2. Press Next or Previous button to select preset stations.

Radio Preset (Programming)


1. Tune to desire radio frequency.
2. Press Mem / Play Button / Scan once to program mode. The “P01” will be shown on
the display. Press Next or Previous button to select stored position “P02”
“P03”… , and press Mem / Play Button / Scan once to confirm.
3. Press Next or Previous button to select preset stations.

Input Radio Station


Press Number Keys to directly enter the frequency of Radio Station. The unit will tune
to the entered radio station immediately.

To improve reception:
Pull out the telescopic aerial. To improve FM Reception tilt and turn the aerial, reduce
its length if the FM-signal is too strong (very close to a transmitter).
Machine Translated by Google

USB, SD/ MMC CARD, TF Card PLAYBACK


Able to decode and playback all MP3 files which stored in the memory media with
USB connector, SD or MMC Card Slot, TF Card.

1. Press MP3/Radio once to MP3 mode.


2. Before connecting the USB media to the unit, make sure the port is in the
correct direction and will connect. Or insert SD/MMC/TF Card straightly without bending.
3. The system will automatically start reading the MP3 files in the USB Storage
Media, SD or MMC Card, TF Card.
4. Press Next / Previous / PLAY Buttons for Next / Previous / PLAY FUNCTION.
5. Press Number Keys to directly enter the sound track sequence.

Wrongly connect the USB Storage Media, or SD/MMC/TF Card upside down
could damage the unit or the USB Storage Media or SD/MMC/TF Card. A
locked SD/MMC/TF Card cannot be detected or playback.

SPECIFICATIONS
Power Output: 1W RMS
Input Power: DC 5V
Rechargeable Battery: DC Li-ion 3.7V 600mAh

PRECAUTIONS:
1. Do not expose the unit to extreme temperature nor high humidity to ensure
normal functioning for a long lifetime.
For instances, never place the unit in bathing areas nor around stoves and radiators.
2. If you find the unit is not working properly, please take it to your nearest services
center. Do not attempt to repair by yourself.

WARNING:
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet, refer to service agent or qualified
engineer only.

Disposal
Batteries do not belong in household waste. As a consumer, you are required by law to
recycle used batteries. You can recycle your old batteries at public collection points or
wherever the product was sold.
For environmental reasons, do not dispose of the device in the household waste at the
end of its service life. Dispose of the unit at a suitable local recycling point.

You might also like