Professional Documents
Culture Documents
This guide introduce you how to use MTS-80A to download the assembled
program into Z80 chip. Please refer to [Z80 Assembling.pdf] for the procedure of
Step 2: Using the RS-232 cable provided from K&H to connect RS-232 cable
between the PC (9-pin COM port) and the MTS-80A (25-pin RS232 port)
Hyper Terminal)
Step 4: Enter a name and choose an icon for COM port connection
Step 5: Select a proper COM port matching the number of the COM port in your PC
Step 6: Select a proper COM port matching the number of the COM port in your PC
Step 7: Press [RESET] button on MTS-80A and then press any key among [0] ~ [F] as
soon as possible. The Z80 welcome message and the command prompt will
Note: If you can not see the welcome message and command message, please
check that:
(2) The Baud Rate setup at JP2 of MTS-80A is consist to the baud rate
Hint: You can input [H] and [ENTER] from command prompt for command help.
Step 9: In the Menu bar, select [Transfer/Send Text File], and browse the *.hex file.
Step 10: For example, browse 80AD0.hex.
Step 11: To execute the program, use GO command by input [G] and [ENTER].
Step 12: The program is now executed. When adjusting the potential meter,
Input
Output