Professional Documents
Culture Documents
Range Summary
The outstanding EON Technology® of EnerSys®
further extends the technical leadership
of PowerSafe® SBS® batteries: not only do
PowerSafe SBS EON Technology cells
and monoblocs retain the benefits typically
associated with EnerSys Thin Plate Pure Lead
Technology (long life, high energy density,
superior shelf life, etc.), they also deliver
exceptional cyclic performance in both float and
fast charge applications, even in the hottest and
harshest operating environments.
• Exceptional fast charge acceptance ability The PowerSafe SBS EON Technology battery range is available in
several configurations: the front terminal SBS B14 - 190F designs
• High energy density which make installation and inspection quick and easy, the classic
top terminal SBS 410 design and the SBS 320 - 3900 series
• Resilient to harsh environments which offers industry-leading capacities (up to 3900Ah) in OPzV’s
DIN container sizes.
• Long design life: 15 years at 20°C
For superior energy and power, high performance and proven
• Up to two year shelf life reliability, there is no substitute to PowerSafe SBS EON
Technology batteries.
Visit us at www.enersys.com
Construction Installation & Operation Standards
• Positive plates - pure lead grids • Designed for operation in traditional • Designed to be compliant with
manufactured using a unique process float applications and cyclic/hybrid international standard IEC 60896/21
• Negative plates - provide perfect applications & 22
balance with the positive plates • PowerSafe® SBS® batteries are • Classified as “Very Long Life”
to ensure optimum recombination designed for use in cabinets or on (>12 years) according to Eurobat guide
efficiency stands, close to the point of use. 2015
• Separators - superior quality A separate battery room is not required • UL recognised component
microporous glass mat separators with • SBS EON Technology® models can • Batteries must be installed in
high absorption and stability be mounted in any orientation except accordance with the IEC 62485-2
• Containers and lids - UL94 V-0 rated inverted. In cyclic/hybrid applications, standard and national regulations
flame retardant ABS material, highly EnerSys® recommend to install SBS • Classified as non-spillable and
resistant to shock and vibration 320 - 3900 cells in horizontal orientation approved as non-hazardous cargo for
• Electrolyte - high grade dilute sulphuric • Up to two year shelf life ground, sea and air transportation in
acid absorbed into separator material • Low maintenance: no water addition accordance with US DOT Regulation
• Terminal design - proven, high integrity required 49 and ICAO & IATA Packing Instruction
leak resistant terminal seal design • Wide operating temperature range: 872
• Self-regulating pressure relief valves - -40°C to +50°C • The management systems governing
prevent ingress of atmospheric oxygen the manufacture of PowerSafe® SBS
• Flame arrestors - built into each bloc/ B14 - SBS 3900 products are ISO
cell for increased operational safety 9001, ISO 14001 and OHSAS 18001
certified
General Specifications
Nominal Capacity (Ah) Nominal Dimensions (mm)
Battery Nominal 10 hr rate 8 hr rate Typical Short Circuit Internal
Type Voltage to 1.80Vpc to 1.75Vpc Length Width Height Weight Current Resistance Terminals
(V) @ 20°C @ 77°F (over insulation) (Kg) (A)(1) (mΩ)(1)
Notes:
(1)
Figures obtained via IEC method.
(2)
With integral or rope handles.
(3)
In horizontal orientation, the above indicated heights become the
lengths, lengths become widths and widths become heights.
(4)
Manifold built-in as standard.
(5)
Manifold available as an option
(increases product height by 12mm).
Outline Drawings
H H
H H
SBS 100 H H
SBS 150F
& 100F 170F & 190F
H H
Publication No: EN-SBS-EON-RS-013 - November 2018
© 2018 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys and its affiliates unless otherwise noted. Subject to revisions without prior notice. E.&O.E.