Professional Documents
Culture Documents
Rescue/EMS
Products Catalog
2015
Skedco is an authorized distributor for PMI, SMC, Rock-N-Rescue, and other distributors of climbing, safety, rescue, and
survival gear. We can offer products manufactured by Pigeon Mountain Industries, SMC, Gibbs, Petzl, Junkin, ROCO and
others. Contact Skedco for catalogs or pricing on products such as:
Skedco accepts VISA and MasterCard as well as purchase orders from federal, state, and local government agencies. Many of the
products offered by Skedco are available to federal purchasers under the provisions of a variety of federal contracts and purchasing
schedules; federal purchasers are therefore encouraged to request appropriate pricing. Price quotations are available upon request.
®
Table of Contents
Sked® Basic Rescue System 2
Sked® Complete Rescue System 3
Dear Skedco customer, Oregon Spine Splint II™ 4
Welcome to Skedco product catalog. In addi- FEBSS HydraSim® 5
tion to traditional items such as the Sked
®
WARNING!
It is the responsibility of the user of climbing, rappelling, rescue and safety equipment to obtain compe-
tent training and instruction and take adequate precautions for safety when using this equipment. The
information in this catalog is provided for making purchasing decisions only; it is not a substitute for
competent instruction and training in techniques and safety.
The Sked® Rescue System
SKED® BASIC RESCUE SYSTEM
The original and still the best solution for confined space, high angle
or technical rescue, and traditional land based applications, the
Sked® stretcher is a revolutionary design which provides
outstanding patient protection and security. The Sked®
comes equipped for hoisting by helicopter in horizontal
position or hoisting in vertical position in caves or industrial
confined spaces. When the patient is packaged, the stretcher
becomes rigid. The durable plastic provides protection for
the patient while allowing extrication through the most
demanding confined spaces. The stretcher is rolled for
storage in a tough cordura backpack which is included with
the system. The system ships at 19 lbs. and comes complete
for most applications. Available in International Orange or
OD Green. Made in U.S.A.
• SK-201 The Sked® Stretcher - the stretcher is fabricated from a special plastic formula which
is both flexible and durable. Securing straps with steel buckles are sewn onto the stretcher through
brass grommets which contribute to the strength and durability. Sked is functional in the desert or
jungle. It will not break even at -120°F
• SK-202 Cordura backpack/Towing Harness - this durable backpack includes shoulder straps
and pockets for storing the Sked accessories when not in use.
®
• SK-203 Horizontal Lift Slings - a pair of 9,000 lb. tensile strength slings is provided for hoisting
the Sked stretcher by helicopter or other haul system in a horizontal position.
®
• SK-204 Tow Strap - this 6 foot strap with bronze snap hooks on each end attaches the Sked®
stretcher to the backpack, changing the backpack to a useful towing harness. It can be used by one
or more people, in several configurations for towing the Sked . It is not to be used for hoisting patients.
®
• SK-205 Removable Webbing Handles - in addition to the four handles sewn permanently onto the Sked® stretcher, four additional removable
handles are provided to allow the Sked to be carried by up to 8 rescuers.
• SK-206 Steel Locking 'D' Carabiner - a large locking 'D' steel carabiner is included with the system for attaching the stretcher to a hoisting
system. These carabiners are rated at a 9,000 lb. minimum break strength.
• SK-207 Vertical Lift Sling - for lifting in the vertical position, 30 ft. of 3/8" PMI kernmantle rescue rope, with a minimum break strength of 5,265
lbs., is provided with a figure 8 knot in the middle.
6530-01-301-0796
www.skedco.com 3
The Oregon Spine Splint II™
OREGON SPINE SPLINT II™ (OSS II™)
This spinal immobilization/extrication device is the only device of its
type available that meets all of the established criteria for immobilizing
a seated patient. Unlike other vest type immobilizers, the OSS II™ does
not move up, down or rotate on the patient’s torso when properly
applied. The head straps are far superior to all other brands. An ideal
companion for the Sked® Stretcher System, when properly used the
OSS II™ provides for safe removal of patients from injury sights
without doing further damage to the spine. The unique criss-crossing
shoulder strap design provides superior immobilization without
restricting breathing and, for clavical fractures, can be re-configured to
retract and immobilize the shoulders. The OSS II™ is designed to
provide easy access to the patient's chest or abdominal area for
treatment or diagnostic procedures. It can be used in place of a
conventional short backboard and as a hip or leg splint. The OSS II™
includes shoulder board not found in similar devices. It can be used to
prevent compression of the shoulders when using a flexible stretcher.
Made in USA.
• SK- 300 OSS II™ Main Body - this durable device includes
color coded straps and buckles, crossing upper chest straps and
liberal use of hook and loop material for reliable connection of
immobilizing accessories.
• SK-304 Head Pads - This set of one double and two single
3/4 inch thick head pads is used to maintain proper spacing
between the board and the head. When the patient is laid down
it does not compress.
NSN 6530-01-265-3583
Skedco has spent the last 7 years developing a rugged, realistic, and affordable solution to
the chaos caused by external hemorrhage. This patented solution is known as the HydraSim
Trauma Bleeding Simulation System.
Simply put, the HydraSim eliminates the fear, hesitation, and anxiety which often accompany
the treatment of traumatic bleeding wounds. Originally designed to train battlefield Medics
and First Responders, the HydraSim® provides nearly 3.5 liters blood pumping intensity
all while appearing to be a common backpack hydration system. Its wireless operation
FS-2000B/FS2000D provides a blood pumping special effect for up to 3 bleeding wounds, each with independent
Available Color control. Users have the opportunity to practice treatments ranging from junctional or non-
junctional tourniquet application to wound packing and dressing application. The HydraSim
is compatible with a wide variety of wearable simulated bleeding injuries
® or users can build their own bleeding injures without using makeup
FS-2000B-BL HydraSim Basic System, Black
or adhesives. The HydraSim's® unique capability allows for the use of
FS-2000B-CB HydraSim® Basic System, Coyote Brown virtually any simulation blood available. The HydraSim® also attaches
FS-2000D-BL ®
HydraSim Deluxe System, Black to most training manikins bringing higher fidelity to the simplest training
® equipment. Eliminate hesitation, fear, and anxiety by training with the
FS-2000D-CB HydraSim Deluxe System, Coyote Brown
HydraSim Trauma Bleeding Simulation System.
The HydraSim® SP (Single Port) System meets the high demand for ultra-realistic
hemorrhage simulation during a wide variety of medical training scenarios while FS-2500B/FS2500D
providing a cost effect solution to meet any training budget. The HydraSim® SP Available Color
combines the rugged durability of the original HydraSim® with a single, wirelessly
operated, venous OR arterial bleeding output port. The SP system comes with a
“plug and play” packable gunshot wound to the thigh for quick set up. The SP
FS-2500-BL HydraSim® SP System, Black
also allows the users to create their own simulated injuries and bring new life to
old training mannequins and moulage kits. FS-2500-CB HydraSim® SP System, Coyote Brown
www.skedco.com 5
Half-Sked™ & Ambu Collar
HALF-SKED™ PATIENT DRAG
The Half-Sked™ is made of the same durable material as the Sked® stretcher,
but is only half as long. The patient is secured in the Half-Sked with sewn-in
two inch webbing straps with fastex style double adjustable buckles, and
patients can be extricated from the tightest of confined spaces. Unlike the
Sked® stretcher, the Half-Sked™ allows the patient to bend at the hips,
allowing greater flexibility to turn corners. The Half-Sked™ should not be used
as a hoisting or immobilization device, but for cost effective extrication from
the most demanding confined spaces. There is nothing quite like it anywhere.
Made in USA.
Available Color
Features:
• Can be set to four standard adult sizes
• Sixteen settings allow for adjustment between standard sizes
• Folds completely flat
• Flip chin piece
• Safety buttons
• Horizontal sizing line
Benefits:
• One collar replaces the traditional four adult collars
• Secures a better fit to the patient while improving immobilization
• Frees up valuable storage space
• For easy assembly and airway access
• Allows for maximum reliability
• For easy and accurate sizing
• SK-601 Ballast Weight - a durable bag filled with 15 pounds of lead shot which
attaches to the bottom of the Sked to make it self-right if it capsizes.
®
• SK-602 Inflatable Chest Pad - the chest pad attaches to the front of the
packaged patient, not allowing the patient to float in a face down position. This
chest pad inflates with 1 to 2 breaths of air and provides 14 pounds of
buoyancy.
• SK-603 Ethafoam Floats (pair) - 6” rigid ethafoam floats which mount on each
side of the Sked Stretcher and provide the ideal amount of buoyancy.
®
• SK-604 Extra Long Handles - a pair of extra long handles is included to help
hoist the stretcher up onto a boat or dock.
• SK-209 Retaining Strap - this strap is used to attach the foam floats and chest
pad to the Sked Stretcher backpack, allowing the entire system to be packed as
®
a single unit.
• SK-605/SK-606 CO2 Inflatable Float 5” Diameter Logs (pair) - each of the float logs has
an inflatable bladder covered with durable black nylon. The logs can be inflated instantly with
the included CO2 cartridges, or can be inflated by mouth.
• SK-602 Inflatable Chest Pad - the chest pad attaches to the front of the packaged patient,
not allowing the patient to float in a face down position. This chest pad inflates with 1 to 2 breaths
of air and provides 14 pounds of buoyancy.
• SK-604 Extra Long Handles - a pair of extra long handles is included to help hoist the stretcher
up onto a boat or dock.
• SK-607 Empty Ballast Bag - a durable bag with a hook and loop secured flap which can be filed
with rocks or other heavy material in the field, eliminating the need for the rescuer to carry the 15
pound regular ballast on extended excursions.
SK-600-OR Sked® Foam Flotation System, International Orange
The SK-600B Hybrid Inflatable Flotation System SK-600-GR Sked® Foam Flotation System, Woodland Camo
• Same as the SK-600A, but with the 15 pound lead ballast in place of SK-600A Sked® Inflatable Flotation System
the empty ballast bag. SK-600B Sked® Hybrid Inflatable Flotation System
Replacement components and National Stock (NATO) Numbers are listed on the
inside back page of this catalog. NSN refers to military version of the SK-600A
NSN 6530-01-260-1227
SIX FOOT LONG LIFTING
HANDLES
This pair of extra long handles is designed for lifting the
Sked® from the water to the deck of motor lifeboats and
other larger boats, or over a cliff or dock edge. They attach
through grommets near the patient's shoulders and have
five sewn-in loops, making it easy to hoist the Sked® hand
over hand.
SK-655 Six Foot Long Lifting Handles (pair)
www.skedco.com 7
Sked® Water Rescue
SKED® RAPID DEPLOYMENT
WATER RESCUE SYSTEM
This unique system features a Sked® Stretcher pre-rigged for extremely
rapid deployment into the water. Using CO2 inflatable float logs, this
system can be in the water, ready to use in less than 30 seconds. A
patient can be packaged and ready for retrieval in less than 30
seconds.
The Rapid Deployment System, designed especially for Marine, Navy and
Coast Guard use, puts the Sked® Stretcher together with the Sked®
Inflatable Flotation System in a large custom duffel bag. The system is
maintained fully rigged in the bag. When deploying the system the user simply unzips
the duffel bag, unrolls the Sked®, triggers the CO2 cartridges, pulls two straps, and drops the
ready to use system into the water. Skedco also offers a Rapid Deployment Conversion Kit
which includes everything for rapid deployment except the stretcher, for those who already
possess the Sked® Basic Rescue System.
The SK-650 Rapid Deployment Water Rescue System on the left comes
with:
• SK-200 Sked Basic Rescue System - the complete basic system as described on page
2, including the stretcher, backpack and hoisting accessories.
• SK-605/SK606 CO2 Inflatable Float Logs (pair) - each of the float logs has an
inflatable bladder covered with durable black nylon. The logs can be inflated instantly with
the included CO2 cartridges, or can be inflated by mouth.
• SK-602 Inflatable Chest Pad - the chest pad attaches to the front of the packaged
patient, not allowing the patient to float in a face down position. This chest pad inflates with
1 to 2 breaths of air and provides 14 pounds of buoyancy.
• SK-601 Ballast Weight - a durable bag filled with 15 pounds of lead shot which attaches
to the bottom of the Sked with hook and loop fastener. This makes the Sked self right if
® ®
it capsizes.
• SK-604 Extra Long Handles - a pair of extra long handles is included to help hoist the
stretcher up onto a boat or dock.
• SK-652 Sling and Carabiner Float - a handy float with loops on it, used to prevent the
slings and carabiner from sinking into the Sked . It prevents entanglement with the patient's
®
legs.
This Sked system comes with a pair of lift slings that are long enough
to accommodate nearly any size patient. They are used to hoist the
patient onto a bariatric guerney for transport in the ambulance. Along
with the slings there is also included a large steel carabiner that has a
minimum break strength of 9,000 pounds that is used to join the sling
ends together and clipped into the hoist mechanism. There is also a
tow strap included to allow two more people to assist in dragging.
To set up the system place one or both tubular webbing loops around the
hinges of a door and close the door. Most commercial buildings have doors
with metal frames that will serve as a very strong anchor. The door should
be located down or across the hall from the stairway entry door. Place the
loops connected with a carabiner to the inside of the door so it doesn’t
interfere with the movement of the carabiner used to connect the rope.
www.skedco.com 9
Sked-Evac™ Tripod
SKED-EVAC™ TRIPOD EN 795 Certified
The Sked-Evac™ Tripod extends to ten feet high at the three anchors which are equally distant from the
center (about 2 3/4 inches). Each of the anchors is anodized red for easy identification, and all are equally
well centered to handle a load. The anchors, header, and legs are interconnected with 1/2" stainless steel
bolts to provide maximum strength. The header limits the distance the legs can spread. When at full
extension, this tripod allows you to bring the patient in a stretcher completely out of the hole. It is
rated to handle an NFPA rescue load. Included with the tripod is a chain which passes through the
feet to provide greater strength and stability. The chain will not degrade in acids or chemicals like
nylon straps or ropes. The legs are adjustable in 5" increments, and Skedco provides safe working
load data for each tripod height on each tripod. Brackets are available for mounting most popular
winches. Made in USA.
Kits are available for hole depths of 25', 50', 75' and 100'. Skedco 4:1
Rescue System contains four times hole depth plus 30' of 1/2" PMI
Rescue Rope. Tag and belay lines contain hole depth plus 25' of 1/2"
PMI Rescue Rope. Replace xx with hole depth to designate kit
preference. Hole depth should be determined by measuring from the
top of the tripod to the bottom of the hole. Skedco reserves the right
to substitute brand equals for items not identified by a catalog
number.
www.skedco.com 11
DBI Winches, TerrAdaptor™
DBI/Sala SalaLift II Winch
This second generation man rated winch provides superior performance
and durability. It features a 6:1 gear ratio providing a 12.75 ft./min.
average lifting speed. The freewheel feature allows fast delivery of
cable and the safety hook features a visual overload indicator. This Snatch Block
winch also features an overload clutch for additional safety. Carrying
bag is included.
3400108 DBI/Sala Sealed SRL Winch w/50 ft. of 3/16” stainless steel cable
3400309 DBI/Sala Sealed SRL Winch w/85 ft. of 3/16” stainless steel cable
3400508 DBI/Sala Sealed SRL Winch w/130 ft. of 3/16” stainless steel cable
The TerrAdaptor™ is the only portable high rescue anchor that is NFPA certified. The TerrAdaptor
system has been tested extensively in both lab and field environments. As a result, the TerrAdaptor
Portable Anchor system in the standard symmetric tripod and quadpod configurations are the only
systems of their kind to be certified by UL to NFPA 1983 (2012 ed.)
Edge-A Tripod: Probably the most popular configuration for an over the
TerrAdaptor™ Tripod System includes: edge rescue, the Edge-A Tripod is essentially an A-Frame with the added
stability of a third leg. Edge A configurations are popular for their large work
• TerrAdaptor™ Tripod Head
areas, high strength and the ability to configure the A leaning either over or
• 2 Offset Leg Clamps with 3 Load Locking Pins each
• Main Attachment Pin away from the edge. The TerrAdaptor’s rear leg can be left to hinge
• 3 Legs Kits complete with Modular Adaptors and Rocker Feet (unsecured) or can be pinned in place for added stability.
• Center Leg Clamp with 3 Load Locking Pins each
• 3 Rope Hobble Sections Tri-Pod: Versatile design facilitates multi directional load.
• Cotter Pin Kit
• Leg Coupling Pin Quad-Pod: Symmetric Quadpods fill the same role as Tri-Pod, but with
• 2 Lash Ring with 1 Coupling Pin each added strength and stability of a fourth leg.
• TerrAdaptor™ Head/ Accessory Bag
• 2 TerrAdaptor™ Leg Bag
• TerrAdaptor™ User Guide
• MBS: 36 kN (8,093 lbf)
www.skedco.com 13
Sked-Pak™ Medical Bag System
SKED-PAK™ SYSTEM
Inspired by the most rigorous demands of our elite military medical groups, this medical bag system is both durable and flexible, suitable
for use by military, paramedics, field medic, smoke jumpers, search and rescue units, and any person with need for a really tough bag.
The system is modular, with internal components which are removable and transferable. The external bags come in two styles. The
Sked-Pak™ I is a heavy duty backpack which is designed to use with the standard Military Alice pack frame and is designed specifically
for use in parachute jumps. It comes complete with an integral single point release mechanism and leg straps necessary for jumping
safely. The Sked-Pak™ II is a lighter duty bag which can be carried by the handle like a suitcase, but also includes concealed straps for
use as a backpack. The internal components of both bags are identical, and the kit components can be removed as a unit for re-supply,
or transferred quickly from bag to bag. A second removable insert can be purchased to enable instant re-supply. All components can be
ordered separately, for replacement of lost parts or to keep kits pre-packed, ready for rapid replacement in
a field environment. Available in International Orange, O.D. Green, Coyote Brown, or Black. All internal
components are black. Made in USA.
Sked-Pak™ I
The Sked-Pak™ I Jumpable Medical Ruck includes a sewn-on single point release and removable
leg straps to meet the technical requirements for use by a parachutist. This design eliminates the
need for the traditional "H" harness. When released the pack
drops on a lowering line for personnel safety on landing. It
includes outer storage pockets, two canteen pockets, and a
removable accessory pack which can be attached on the top or
bottom. A second accessory pack can be purchased to increase
storage capacity. Compression straps, leg straps, and release
mechanism are included with each bag. The compression straps
prevent loss of equipment should the zipper burst on impact. Coil
zippers are used throughout the bag, allowing sliders to be
pulled back over a popped zipper, making it good as new. The
Sked-Pak™ I includes all internal components described below.
It does not include pack frame or canteens. A Camelback can
replace the 2-qt canteens. Military personnel and other jumpers
are encouraged to contact Skedco for complete information
regarding parachute jumping provisions of the bag.
SK-250 Complete Haz-Mat / Hospital Sked® rescue system with strap kit
SK-251 HMH Sked® - body only, yellow
SK-252 HMH Sked® Strap Kit
SK-253 HMH Sked® Rapid Deployment Case - yellow Available Colors
Note: Add “BL” after product number for Stretcher and accessories in Black
NSN 6530-01-522-7855
SK-2510 Shuttle Sked Kit, in yellow bag SK-2511 Shuttle Sked rope Kits, in yellow bag
www.skedco.com 15
HMH Sked™/Skyhook® System
Skyhook® Rope Winch System
This capstan style winch is rated to haul people into helicopters. It fits
onto a Sked-Evac™ tripod. It can handle unlimited
lengths of rope and is self tailing. It has recently been
discovered for use in the WMD/Haz-Mat environment.
When using continuous loops of rope it can haul as
many as 6 victims at one time while delivering empty
HMH Skeds back to the Hot-zone.
Note: It would be advisable to have a shower system between the hot and warm zone to
drag patients through to initially decon the patients and litters. This will be extremely
important if they need to wait any length of time before going through the decon station.
Ambulatory patients can also walk through it.
This is an illustration of a system utilizing the Skyhook winch with continuous loop rope, HMH Skeds and Haz-Mat rope
grabs. As many as six victims can be dragged while sending empty stretchers back to the hot zone.
HMH Skeds can be stored and shipped on pallets of 50 to 150 per
pallet. Pallets can be stacked 4 high for prolonged storage of up to
600 HMH Skeds in a space of 8’ x 3’ x 7.5’ high. Bagged strap sets
stored in moisture resistant boxes on top of the stack.
Ready to use HMH Skeds can be rolled 1-4 per bundle in rapid
deployment bags for easy storage in compartments of Haz-Mat
rescue or fire apparatus. This allows for rapid use by units first on the scene.
Emergency responses to Hazardous Materials incidents are not just dangerous, they are very complex, personnel rich, and the equipment
is very expensive. These factors greatly limit the numbers of non-ambulatory patients that can be removed from a contaminated zone.
The introduction of the HMH Sked and newly developed tactics, have greater capabilities in fulfilling the rescue mission. These include,
at the very least, the ability to rapidly (a word not often used in Haz-Mat operations) remove large numbers of patients and minimize
the risk to rescuers. By using these creative new techniques and others being developed, the potential of this device is only limited by
the creativity and expertise of the trainers and field personnel. Medical Examiners have now found it safer, faster and easier to recover
bodies from the contaminated area.
The rapid deployment case holds 4 HMH Skeds assembled and ready for use. It will also
carry 8 bagged Shuttle Sked rope kits. That allows you to have the complete kit in 2 or
3 bags. With Haz-Mat incidents on the rise in this country and the potential for terrorist
activities which can result in mass casualty incidents, the HMH Sked is a tool that allows
response personnel to efficiently and above all, more SAFELY rescue substantially more
of the victims.
HMH Rapid Deployment Carrying Case
www.skedco.com 17
Mass Casualty Evacuation
rapid access system (RAS)
It features a 30 ft. cord with a screw link on one end which is attached to a loop on
the soldier’s vest behind the neck. There is a carabiner on the other end that is
clipped to a loop inside the pouch. The pouch has a belt loop that is sewn to the
pouch at the top and attached with velcro at the bottom. The outside of the belt loop
is covered with “loop” velcro for attachment to “hook” velcro on a vest. There is
“hook” velcro on the front of the pouch in case the vest is equipped with “loop”
velcro. The flap at the top uses velcro to secure the closure. The carabiner with the
cord attached is clipped into the loop inside the pouch. The cord is stuffed (not coiled)
into the pouch. A ball lock is attached to the cord about 16 to 18 inches from the end.
It keeps the cord in the bag when the screw link is attached
to the vest and the flap is closed. You can adjust the position
of the ball to fit your particular vest.
www.skedco.com 19
Rescue Harnesses
SKED-EVAC™ YAK™ Strap in bag
w/3 Alum. and 1 Lite Steel
Carabiners
The YAK™ Strap is constructed of 1.75” Mil Spec Type 13
webbing with 7,000 lb. tensile strength, PS 70124-1 black
steel buckles proof load tested to 5000 lbs. and double
bartacked throughout using 138 red polyester thread. It can
be configured as a "buddy carry strap", "patient drag strap",
or a Class III full body harness. It is an excellent victim
harness. The system comes complete with a general purpose
utility pouch, SK-972, MOLLE/PALS compatible, constructed
of 1000 denier Army Camouflage Uniform (ACU) pattern or
coyote brown CORDURA® nylon, three Aluminum Locking D
Carabiners, black and one SKEDCO-SMC black, “Lite Steel”
Locking D Carabiners, SK-206-B. The complete kit measures
6"x.6.5"x2.5".
The Kevlar version is extra long for use over Level "A" suit
and is flame retardant and includes the SKEDCO Extreme
Medicine®/Rescue Knife on a lanyard.
SK-970 SKED-EVAC™ YAK™ Strap in bag w/3 Alum. and 1 Lite Steel Carabiners
SK-970-K SKED-EVAC™ Kevlar YAK™ Strap in bag w/4 Lite Steel Carabiners, 1 SK-EMRK & 3' Cord
SK-970-L SKED-EVAC™ YAK™ Strap LITE in bag w/3 Alum. & 1 Lite Steel Carabiners
Five full strength attachment options: dorsal, waist, shoulder lifts, and rear waist belt, plus side
attachments for positioning. All these attachment points are UL listed as full strength attachments per
NFPA 1983-01. W leg-loop suspension lifts and distributes the leg loop more ergonomically around thigh,
and holds it in position better for improved comfort and better security. One-size adjustable chest
harness allows use of the harness in the seat-only configuration (NFPA Class II), or as a full body harness
(NFPA Class III and ANSI Z359.1). Chest harness can be attached and adjusted to size in less than a
minute. These are easily shared among users. Wide-spread Y yoke minimizes the tendency of the
harness to rub at the neck, and incorporates softer webbing and padded shoulder straps for comfort.
Easy fit sizing fits a wide range of users with only two seat sizes. Includes storage/carrying bag. Made
in U.S.A.
We carry the full line of harnesses from all manufacturer featured in this catalog.
www.skedco.com 21
Micro Hauler and Pulley
Micro Hauler & Pulley
The Micro Hauler is a tiny but extremely strong and efficient version of the Rescues Hauler. It comes in either
single or double pulley versions. The cam is guaranteed for life. The pin must be removed to allow the rope
to be removed or inserted. When the pin is in place it allows the cam to be opened just far enough to allow
travel in both directions but it can not come out accidentally. The break strength in the manner of use is
7,000 pounds. The Micro Hauler is only 6 inches long and features 1 inch pulley sheaves. Suggested uses:
pick-offs, line transfers, inchworm systems, raising and lowering the foot end of a basket or Sked® litter from
vertical to horizontal and much more. Skedco recommends using a 2 1/2 inch long screw link for attaching
the rope at the bottom end of the Micro Hauler.
Our 3 standard kits are for 25’, 50’ and 75’ distance. The 25’ 4:1
Micro Hauler Rescue Kit is in a flat bag with belt loops. The 50’ and
75’ Kits are in round bags that measure 8” in diameter and 12” or
15” tall respectively. All 3 bags have carrying handles at the top.
All Micro Hauler Kits are rigged with the pulleys at a quarter turn
from each other. This will help prevent twisting of the ropes when
hoisting long distance.
Piggy back systems allow attachment to the victim’s rope to raise him/her to safety.
Technora® decomposes at 480°F. It is usable at 390°F for long periods of time and maintains
half of its strength at 482°F.
www.skedco.com 23
SMC Hardware
SMC Large Locking D Carabiners
One of SMC's best selling carabiners. The Large Steel Locking D was developed especially for the
needs of the fire and rescue communities with a large gate opening that easily fits over litter
rails. The sleeve locks on the gate rather than the body of the carabiner, eliminating problems
of the knob binding on the frame after the carabiner has been loaded.
Dimensions: 5.04"x2.97"
SKEDCO NFPA Lite Alloy Steel, Black SKEDCO Kinetic Screw Gate, Black
This Lite Alloy Steel Locking D is a light weight The SMC Kinetic Series, made of anodized aluminum is built from
steel carabiner that meets the NFPA “G” the ground up to gives you the best of the
ratings. The Lite Alloy incorporates a stainless best in carabiner functionality. Features a key
steel gate and locking sleeve for superb action, lock nose and screw locking gates.
greater strength and exceptional reliability. The
sleeve locks on the gate rather than the body Dimensions 4.57"x2.85". Gate opening 0.98".
of the carabiner, eliminating problems of the Weight 2.8 oz. MBS 6,295 lbs.
knob binding on the frame once the carabiner
has been loaded. Dimensions 4.25"x2.76". Gate
Opening 0.94". Weight 6.6 oz.
SK-206B SKEDCO® NFPA Lite Alloy Steel,Black SK-1013 Skedco® Kinetic Screw Gate, Black
ANSI FP Lite Alloy Carabiner SMC Standard Figure 8 with ears, Black
The SMC FP (fall protection) Lite Alloy has One of the most popular full-sized
been specifically designed for all your descenders used by professionals
fall protection requirements including throughout the rescue, fire service, police/
optional captive eye pin which can be tactical and industrial/work related
added as required. Features a dual markets. This model is ideal
action auto locking and compliant with for working with a single or a
the new ANSI Z359.1 2007 edition double wrap of rope up to
standard with a gate break strength of 16kN 1/2'' in diameter. The oval
or 3600 lbf and a total MBS of 7000 lbf this is truly carabiner hole doubles as a
one bomb proof carabiner. Dimensions 4.6"x2.8". belay plate for up to 1/2'' rope. Machined from 1/2'' thick,
Gate Opening 1.0". Weight 8.9 oz. solid aluminum, heat-treated bar and then finished with a very
tough, hard-anodized finish for extra durability.
102100 ANSI FP Lite Alloy Carabiner 128701 SMC Standard Figure 8 with ears, Black
NFPA130301 SMC Mini Rigging Plate, Black NFPA126502 SMC Escape 8, Black
SMC Grip Rope Grab SMC NFPA Swivel DELTA Triangular Steel
The SMC Grip is the best rope grab on the The SMC Rescue Swivel is built around a
Screw Link
market. This rope grab designed to work heat-treated steel axle and a sealed high
This Delta shape quick link can be used to
with virtually any rope you have in your efficiency ball-bearing to ensure flawless
rig anchors as well as a chest harness
gear bag. Certified to Meet NFPA ''L'' - rotation during even prolonged and difficult
connector. While slower to open and close
Light Use 5kN (10-12.5 rope diameter). raises in severe rock, mountain and rescue
than a carabiner, they can be more secure
conditions. The holes are sized to work
when tightened down, and cost less. Size
with rescue carabiners, and allow carabiner
10mm.
lock sleeves to pass through without
hanging up.
NFPA220500 SMC Grip Rope Grab NFPA136000 SMC NFPA Swivel P11 Delta Triangular steel screw link
• Laser cut ice hardened corrosion free blade steel 440A in steel finish
• MIL spec - 40°C + 80°C operating temperatures
• Laser cut half serrated cutting edge
• Window puncher/glass breaker on handle
• Maintenance free ergonomically designed all weather handle grip
• Aluminum handle with resin inlay
• Oversized thumb stud
• Oxygen wrench hole on blade
• Internal blade release mechanism
• Pocket clip
• Each blade individually serial numbered for 100% traceability
• Design to cut patient’s clothing w/o cutting the patient
Lightweight Tactical
www.skedco.com 27
National Stock Numbers
The following list shows replacement part numbers for selected Skedco products and their corresponding National (NATO)
Stock Numbers. Replacement parts for all Skedco products are available at a nominal cost. We strongly recommend that
all products used for rescue be inspected regularly and parts replaced if they show excessive wear. Parts may be ordered
using the Skedco catalog number or the NATO number, but the purchaser should be aware that the NATO numbers do not
differentiate color. Purchasers using the NATO number should indicate color preference in their text description. If color is
not specified military purchasers will receive OD green/Camo by default.
International
Color Chart Coyote Brown Yellow ACU
Orange
Woodland
OD Green Black Foliage Green
Camo
Skedco, Inc.
P.O. Box 3390 Tel: (503) 691-7909
10505 SW Manhasset Drive Fax: (503) 691-7973
Tualatin, OR 97062 Order: 800-770-SKED (7533)