Professional Documents
Culture Documents
CH Issue 3
Materials 18
Actuator
19
No. Part Material
Aluminium alloy DIN 1725 G Al Si 10Mg
1 Body (polyurethane laquer finish)
2 Piston Aluminium alloy DIN 1725 G AI Si 10Mg
Aluminium alloy DIN 1725 AI Si 10Mg
3 End cover (polyurethane laquer finish) 24
4 Drive shaft Aluminium alloy G AIZnMgCu1, 5, DIN3.4365
5 † Gear rack Steel C55 WS
7 Springs Spring steel DIN 17223 Class C
* 8 # Spring holder Steel C45 DIN 17200
*9 Bearing bush Nylatron GS
25
10 Bearing bush Delrin
11 Bearing strip PTFE carbon fill
12 'O' ring Nitrile rubber
13 Spring clip Spring steel DIN 17222 C67 22
14 Washer Delrin 26
15 Bolt Alloy steel ISO 898 Gr. 12.9
16 † Bolt Steel ISO 898 Gr. 8.8
* 17 # Washer Steel SAE 1012 27
18 # Washer Nylon
20
19 # Domed nut Steel SAE 1012
21
† BVA25T to BVA200T Only. # BVA500T and BVA1100T Only.
* Not shown
Valve 23
20 Body SG iron JIS G5502 FCD 450
Stainless steel DN15-125 JIS G5121 SCS14 Installation
21 Disc DN15-250 JIS G3214 SUS F316 The valve should be installed into the pipework between flanges
22 Upper stem Stainless steel JIS G4303 SUS(420J2) with the actuator in an accesible position. Full Installation and
23 Lower stem Stainless steel JIS G4303 SUS(420J2) Maintenance Instructions are supplied with the product.
24 Dust seal Natural rubber with carbon steel insert
25 Spring pin Carbon tool steel Kvs values (valve 90° open)
DN50 to DN100 PPS Resin DN DN DN DN DN DN DN DN
26 Seal ring Size 50
DN250 Brass 65 80 100 125 150 200 250
27 Seat ring EPDM Kvs 196 333 570 920 1 463 2 280 2 440 5 600
Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification. © Copyright 2004
Dimensions (approximate) in millimetres
Size Type d L D H1 H2 A B C E F
BVA25T 56 43 90 68 138 80 172 83 17.5 303.5
DN50 BVA40T 56 43 90 68 138 109 204 96 17.5 332.5
BVA40T 69 46 115 79 151 109 204 96 17.5 356.5
DN65 BVA100T 69 46 115 79 151 136 267 117 17.5 383.5
BVA40T 84 46 126 86 156 109 204 96 17.5 368.5
DN80 BVA100T 84 46 126 86 156 136 267 117 17.5 395.5
BVA100T 104 52 146 103 167 136 267 117 17.5 423.5
DN100 BVA200T 104 52 146 103 167 161 360 137 22.5 453.5
DN125 BVA200T 130 56 181 118 191 161 360 137 22.5 492.5
BVA200T 153.6 56 211 135 202 161 360 137 22.5 520.5
DN150 BVA500T 153.6 56 211 135 202 215 352 205 22.5 574.5
BVA500T 199 60 256 177 227 215 352 205 22.5 641.5
DN200 BVA1100T 199 60 256 177 227 285 475 260 30.0 719.0
DN250 BVA1100T 253 68 322 215 280 285 475 260 30.0 810.0
B C
E
Port "A"
air connection
G ¼"
H2
d D
H1