Professional Documents
Culture Documents
SICURA Nutritube - en
SICURA Nutritube - en
Product Name
SICURA Nutritube
1. Description / Application
SICURA Nutritube is a UV system for dry-offset or letterpress printing curing by radical mechanism. Suitable for
laminates and extruded plastic tubes with in-line Corona or flame treatment. It is especially developed to achieve
very low residual odour and migration risk after curing and outstanding adhesion properties on a wide range of
substrates.
2. Product Safety
Intended Use
Food packaging, pharma, or hygiene: YES
3. Properties / Substrates
Properties
Substrates
Adhesion, resistance to scratching and scuffing, water resistance (wet scratch and wet scuff resistance), heat-
sealing resistance, far-reaching resistance against hydrogen peroxide aseptic treatment and excellent
resistances to fat, acid or alkaline products, cosmetics, lotions, shampoos, alcohol, cleaning agents and solvents
are normally obtained on following substrates:
- Polypropylene
- Polyethylene
Before the print job is started, new materials must be checked for compatibility with the inks of this series or with
the planned ink-/overprinting varnish combination, even if their suitability on a comparable type of the same
substrate group is proved.
The test prints, for adhesion, resistance to scratching and water (resistance to wet scratching and scuffing),
adhesion and scratch resistance after heat-sealing, resistance of the printed ink to the packaging contents and
other application-specific requirements.
Due to the post-curing process, these properties may change during the first 24 hours after printing. Therefore
please make a re-check after one day.
Consequently, for every new job in which printing is done on a known material, but with untested ink and printing
combinations, the aforementioned tests have to be carried out as well.
Do not handle products without having consulted the corresponding safety data sheets. We supply them
together with the first shipment.
Cleaning
5. Shelf life
The inks and varnishes of this series have under normal conditions a shelf life of at least 9 months. Within this
period the products are usable in conformity with the indications of this data sheet.
on wool scale WS
Light Resistance
resistance
resistance
Product name Product code
Ethanol
Solvent
Alkali
Nutritube Process Yellow E01 70-301087-6 5 5 5 5
Nutritube Process Cyan E01 70-121005-6 7-8 5 5 5
Nutritube Process Magenta E01 70-802407-0 5 3 4-5 4-5
Nutritube Process Black E01 70-900837-9 7 5 5 5
Nutritube Warm Yellow E01 71-301088-2 5 5 5 5
Nutritube Fast Yellow E01 71-301089-0 6-7 5 5 4-5
Nutritube Orange 021C E01 71-700659-7 5 5 5 4-5
Nutritube Fast Orange E01 71-700660-5 6 5 5 5
Nutritube Fast Rhodamine red E01 71-802412-8 7-8 5 5 5
Nutritube Red 032C E01 71-802409-4 6-7 5 4-5 4-5
Nutritube Rubine red E01 71-802410-2 5 3 4-5 4-5
Nutritube Warm red E01 71-802408-6 5 5 4-5 3-4
Nutritube Fast Warm red E01 71-802413-6 6-7 5 5 4-5
Nutritube Fast Violet E01 71-100576-9 7 5 5 5
Nutritube Fast Purple E01 71-100587-6 7-8 5 5 5
Nutritube Fast Reflex blue E01 71-121007-0 7 5 5 5
Nutritube Blue 072 C E01 71-121018-7 7 5 5 5
Nutritube Green E01 71-501349-6 8 5 4-5 4-5
Nutritube Neutral black E01 71-900838-5 7-8 5 5 5
Nutritube Transparent white E01 71-000383-1 - - - -
Nutritube Opaque white E01 71-010511-5 7 5 5 5
Nutritube Intensive Black E01 71-900966-4 7 5 5 5
The light fastness values refer to a solid tone printing. Light fastness decreases when colour strength is reduced
or if colours are intermixed.
This applies also to other resistances mentioned in the product list.
Reactive thinner: 81-470072-0 (1-3%) Photo-Initiator: 85-601860-1 (max. 5%)
Antitack Paste: 71-470085-3 (1-3%) Adhesion promoter: 71-470473-1 (max. 10%)
Because of the differences in materials for printing, processing conditions and test criteria this Technical Data Sheet can only be of an advisory
nature. Our data reflect the latest state of our knowledge and are based on the characteristics established in the laboratory and on practical
experience. Your own tests with the original materials under the respective conditions are indispensable.
We disclaim any liability for applications for which this ink series is not foreseen.