Professional Documents
Culture Documents
1. Chipping system
POWER(KW) PRICE(USD)
NO. NAME MODEL QTY
SINGLE AMOUNT SINGEL AMOUNT
2. Crushing system
POWER(KW) PRICE(USD)
NO. NAME MODEL QTY
SINGLE AMOUNT SINGEL AMOUNT
3) Raw materials: Q235 Steel, EP500, to ensure excellent quality of raw materials.
Pre-storage bin for chips storage , keep hammer mill working stable , and continues
2) Crush room with drop-shaped structure divided into two parallel grinding chamber and shear device,the lower
the drop-shaped room with another smash to improve the hammer blow to the efficiency of materials;
3) Rotor with a special design,with two different hammer screen space to meet the exchange of different
granularity;
5) Door interlock device operation to ensure a safe operation when the motor does not start to open the door;
6) Rotor motor and the mill installed in the same heavy-duty base,using the pin coupling Direct transmission,rotor
balancing efficacy through,the work can be positive and negative.
1) Bag quantity:36;
4) Dismountable bag structures with skeletons ,and unique jet devices, to clean the bags
6) Adopt bag fast loading and unloading mechanism patent technology,when open the door, worker can remove
the filter bag one by one.
7) Mainly applied for filtering feed mill, in food or oil processing plants and in chemical industry etc.
1) Specially designed ;
3) Raw materials: Q235 Steel, EP500, to ensure excellent quality of raw materials.
3. Drying system
POWER(KW) PRICE(USD)
NO. NAME MODEL QTY
SINGLE AMOUNT SINGEL AMOUNT
3) Raw materials: Q235 Steel, EP500, to ensure excellent quality of raw materials.
1) Ribbon adop Continuous cold rolling process, Guarantees sufficient wear resistance
4) Strong adaptability, convenient installation and repair, long service life, and can be widely used In many kinds
of powdery, granular and small pieces of material level and small angle(0°-20°)delivery;
5) The machine has the advantages of small volume, low noise, inlet and outlet position of flexible arrangement;
1- Automatic control, use small wood chips, particles, sawdust, wood powder, sawdust and other organic biomass
as fuel for continuous burned/combustion, and convert it into flame and heat energy.
2- The fuel is continuously and automatically supplied, the flame is stable, and the flame at the highest
temperature section can reach 1300 ℃, which is widely used in the industry.
1- Direct-fired design, the combustion chamber receives the flame from the burner, the flame and air are fully
mixed, and the air will be heated to become hot air .
2- Inside structure is special design, completely separates the flame and the hot air, and discharge the clean hot
air to next drye drumr.
1 Drum dryer will dry the moisture of materials from wet to dried
1) Specially designed
3) Raw materials: Q235 Steel, EP500, to ensure excellent quality of raw materials.
POWER(KW) PRICE(USD)
NO. NAME MODEL QTY
SINGLE AMOUNT SINGEL AMOUNT
1) Ribbon adop Continuous cold rolling process, Guarantees sufficient wear resistance
4) Strong adaptability, convenient installation and repair, long service life, and can be widely used In many kinds
of powdery, granular and small pieces of material level and small angle(0°-20°)delivery;
5) The machine has the advantages of small volume, low noise, inlet and outlet position of flexible arrangement;
1) Specially designed ;
4. Special feeding mechanism, reliable feed evenly, specially designed for suppressing various specific gravity of
0.3 to 0.6 g/cm3 designed lightweight material granulating
6. The whole machine is equipped with iron and overload protection device, give full consideration to the
protection of the machine in use process.
7. The main transmission gear drive with high precision, USES the quick-release ring mould type of anchorear
type, output is about 15% higher than type belt drive
8. The machine transmission part selects Japan high quality bearing, ensure transmission efficient, stable and
reliable;
9. Adopt international advanced equipment and process of processing and manufacturing of steel ring die, long
service life, the final pellet is smooth, high quality.
1) Customized stucture , with special big angle ,installation can be >70 °, shortest installation space
2) With bucket on belt , so it can ensure the pellet do not drop back , or down
3) Human food grade materials, for high humidity, high temperature, safety feed situation
1) Specially designed ;
1) The cooling aer and reverse motion of grain marerials ensures the gradual cooling of materials upwards,and
aetter cooling result than other products;
2) The main parts,adopting mechanical bending ,rivet joint and sealing,features good airproof ability;
3) With its large capacity,even huge rain materials can be turned out,and the automation degree is high;
4) Widely used foe cooling of various materials such as the pelleting feed,extruding feedmmash material and so
on,Especially using for the extruding feed.
1) Siemens motor. Steady and reliable manner, easy to operate and maintain
3) Combining the characteristics of circular motion, ellipse motion and to-and-fro linear motion, high sieving
efficiency and low energy consumption.
1) Specially designed
1) Customized stucture , with special big angle ,installation can be >70 °, shortest installation space
2) With bucket on belt , so it can ensure the pellet do not drop back , or down
3) Human food grade materials, for high humidity, high temperature, safety feed situation
Part 5 12000
Workshop Show
Contact Information:
HENAN RICHI MACHINERY CO.,LTD
Angela Zhao
Email: manager@cn-pellet.com
WhatApp/Cel: +86 185 7410 3366
Skype: angela.1019
Fax: +86 37163752859
Website: www.cn-pellet.com
Address: Zhengzhou City, Henan province, China