Professional Documents
Culture Documents
Switch Catalogue
Switch Catalogue
VSP series float level switch are specially usind for monitoring and controlling the level of corrosive liquids.
All the wet parts material are using the plastic parts such as PVC, CPVC, PTFE and PVDF.
VSP float level switch is excellent for Emptying, Filling, Contact output or Alarms of Chemicals like HCL,
H2SO4, NaOH, and many more chemical liquids.
OPERATION PRINCIPLE
VSP float level switch uses a magnet and reed
+ switch to detect and control liquid presence.
The hermetically reed switch that installed inside the
Tube
guide tube will actuate from an applied of magnetic
Float field from the float.
Reed Switch
The float will be moving up and down through the
guide tube due to the liquids level movement.
Magnet When the float is at the position of reed contact
set point, the reed switch will open or close depending
on the application requirement.
The set points will be provided by two (2) pieces of
Stopper stopper.
+ The set points can be up to 8 points contacts.
SPECIFICATION
MODEL = VSP MODEL = VSTF
125 90
1A 1A = PP + 20%GF Housing, IP-65
1B 1B = PTFE Housing,IP-65
100
2A 2B
2B = Cable Gland, PG 16
3B 3A = Flange or Screw Conn
3A PVC or CPVC Material
3B = Flange or Screw Conn
4A 4B PTFE Material
L1
+
L1
+ + 6A = Stopper, PP Material
L
L
+ +
+ +
100
100
B
ØA
TERMINAL HOUSING
PP HOUSING 125 PTFE CYLINDER HOUSING 90
MODEL
90
85
MATERIAL PP + 20% GF PTFE
PROTECTION IP-65 IP-65
ELECT CONN Polyamid ½”NPT Gland Polyamid PG-16 Gland
AMBIENT TEMP 80 °C 100 °C
NO OF CONTACT 5 x SPDT & 8 x SPST 4 x SPDT & 6 x SPST
+
L = L1 + 100 mm
OPEN AT FLOAT
RISING (NC)
L1 L1 L2
L2
+
+ + + + + + + + +
L3
+ +
+ + + + + +
1 2 1 2 3 4
L4
L1 = ............ mm NC NO L1 = ............ mm NC NO
+ L2 = ............ mm NC NO L2 = ............ mm NC NO
CLOSE AT FLOAT
L3 = ............ mm NC NO L3 = ............ mm NC NO
RISING (NO)
L = L1 + 100 mm L4 = ............ mm NC NO
+ L = L1 + 100 mm
+ L1 L2 L3 L1 L2 L3 L4
+ + + + + + + + + + + + + +
100
+ +
+ +
+ + + + + + + + + + + + + + +
1 2 3 4 5 6 1 2 3 4 5 6 7 8
RELAY PROTECTION UNIT OPTIONAL
VSP series float level switch can be used with the “WINGEL” control unit CU-1, CU-3 or CU-4 for
protection of the reed switch . The control unit will also be given the control relay output for emptying process
or filling process (CU-1) and emptying or filling process and alarm high & low output relay (CU-3) and
only given the 4 output relay (CU-4).
H H Relay
Control
H Alarm
L Alarm
LL Relay
H Relay
L Relay
OUTPUT
Relay Output
Control Pump OUTPUT
Start & Stop
+
+
+ HH
+ HH
H +
+
+
+ H
+
H
+
+
+
L
+ L
+ +
+
+
L LL
HL C + LL L HHHC LL
+ + LL L HHHC
220 Vac 220 Vac 220 Vac
ORDERING CODE
MODEL DESCRIPTION
VSP Float level switch with flange (screw) and tube in PVC, float in PP & PP housing
VSCP Float level switch with flange (screw) and tube in CPVC, float in PP or PVDF & PP housing
VSTF Float level switch with flange (screw) and tube in PTFE, float in PVDF & PTFE or PP housing
CODE 6 OPTIONS
0 No Options
Ex Available with Ex-proof Enclosure (Please contact)