Professional Documents
Culture Documents
5 1. Transportation
5 1. Transportation
5-1
2. DIMENSION AND WEIGHT
1) HX210A L
H
H Height mm (ft-in) 3000 ( 9' 10")
W Width mm (ft-in) 2990 ( 9' 10")
L W
Wt Weight kg (lb) 18410 (40587)
※ With 600 mm (24") triple grouser shoes and 3800 kg
(8380 lb
lb)) counterweight. 210A5TR02
H
H Height mm (ft-in) 1550 ( 5' 1")
W Width mm (ft-in) 630 ( 2' 1") L
Wt Weight kg (lb) 1790 (3950)
※ 5.65 m (18' 6") boom with arm cylinder (including pip-
ing and pins). 13035TA03
5-2
(5) Boom cylinder
Mark Description Unit Specification
H
H Height mm (ft-in) 190 ( 0' 7")
W Width mm (ft-in) 330 ( 1' 1") L
Wt Weight kg (lb) 182 (400)
※ Including piping.
13035TA06
H
1780 (5'10")
H Height mm (ft-in)
[1822 (6')]
1104 (3' 7")
W Width mm (ft-in)
[1126 (3' 8")] L W
495 (1092)
Wt Weight kg (lb)
[650 (1433)]
220A5TR03
[ ] : with FOG GUARD
(7) Counterweight
Mark Description Unit Specification
300S5TR04
5-3
(9) Arm assembly (option)
Mark Description Unit Specification
H
H Height mm (ft-in) 920 ( 3' 0")
W Width mm (ft-in) 350 ( 1' 2") L
H
H Height mm (ft-in) 870 ( 3' 0")
W Width mm (ft-in) 350 ( 1' 2") L
5-4
2) HX210A NL
(1) Base machine
Mark Description Unit Specification
H
W Width mm (ft-in) 2550 (8' 4")
Wt Weight kg (lb) 18820 (41491) L W
H
H Height mm (ft-in) 1550 ( 5' 1")
W Width mm (ft-in) 630 ( 2' 1") L
Wt Weight kg (lb) 1950 (4300)
※ 5.65 m (18' 6") boom with arm cylinder (including pip-
ing and pins).
13035TA03
5-5
(5) Boom cylinder
Mark Description Unit Specification
H
H Height mm (ft-in) 240 ( 0' 9")
W Width mm (ft-in) 300 ( 1' 0") L
Wt Weight kg (lb) 260 (570)
※ Including piping.
13035TA06
H
1780 (5' 10")
H Height mm (ft-in)
[1822 (6' 0")]
1104 (3' 7")
W Width mm (ft-in)
[1126 (3' 8")] L W
495 (1092)
Wt Weight kg (lb)
[650 (1433)]
220A5TR03
[ ] : with FOG GUARD
(7) Counterweight
Mark Description Unit Specification
300S5TR04
5-6
(9) Arm assembly (option)
Mark Description Unit Specification
H
H Height mm (ft-in) 920 ( 3' 0")
W Width mm (ft-in) 350 ( 1' 2") L
H
H Height mm (ft-in) 870 ( 3' 0")
W Width mm (ft-in) 350 ( 1' 2") L
5-7
3. LOADING THE MACHINE
210A5TR07
210A5TR08
5-8
(3) Lower the working equipment gently after the
location is determined.
※ Place rectangular timber under the bucket
cylinder to prevent the damage of it during
transportation.
Be sure to keep the travel speed switch on
the LOW (turtle mark) while loading and
unloading the machine.
Avoid using the working equipment for load-
ing and unloading as it will be very danger-
ous.
Do not operate any other device when load-
ing.
Be careful as to the boundaries of loading
plate or trailer as the balance of machine will
210A5TR09
abruptly change.
5-9
4. FIXING THE MACHINE
Safety knob
220A5TR13
Chain
210A5TR11
5-10
5. LOADING AND UNLOADING BY CRANE
5-11