Professional Documents
Culture Documents
Advantages :
Instructions :
• Dilute with water in a plastic acid resistant container before using. LITE may be diluted up to 15 parts
water depending on the nature and oxidation level of the surface to be treated. Recommended
concentrations for typical usage 10 parts water to 1 part LITE.
• Can be applied by brushing or spraying. Do not spray in open and/or windy areas.
• Allow the solution to dwell for 2-10 minutes prior to rinsing.
• Thoroughly rinse all containers, sprayers, applicators that were used with LITE.
Note :
• Do not permit solution to dry on surface, rinse completely. When used as directed with proper
protection against acid damage, it is safe on aluminum, copper, Plexiglas, stainless steel, brass, iron,
painted surfaces, steel, bronze, lead and rubber. It is not safe on galvanized surfaces, zinc
magnesium, chrome, tin and inferior glasses. Do not use on aircraft!
• Can cause severe burns to skin, eyes, and internal organs. For industrial use only by trained
personnel. Will etch glass. Avoid contact with skin, eyes, and clothing. Do not take internally.
Protective clothing such as goggles, face mask, and rubber gloves must be worn. Check gloves to
insure no pinholes are present. Contact with LITE may not cause immediate pain, redness, or burning
until several minutes have elapsed.
Properties :