Professional Documents
Culture Documents
DEPARTMENT OF ARCHITECTURE
ardepartment@dhvsu.edu.ph
Instructor:
AR. OLIVER M. CHAVEZ
omchavez@dhvsu.edu.ph
C. SPACE REQUIREMENTS:
E. DRAWING REQUIREMENTS:
ITEM SCALE DRAWING REQUIREMENTS POINT
S
Site Development Plan Any Convenient Fully Rendered¼ illustration board or 20
Scale equivalent
Floor Plans Any Convenient Fully Rendered¼ illustration board or 30
Scale equivalent
2 Elevations Any Convenient Fully Rendered ¼ illustration board or 10
Scale equivalent
1 Blow-up Details of either Any Convenient Fully Rendered ¼ illustration board or 10
-1 bedroom or 2 bedroom, Scale equivalent
or 3 bedroom
1 Interior Perspective of Any Convenient Fully Rendered on ¼ illustration 15
either -1 bedroom or 2 Scale board or equivalent
bedroom or 3 bedroom
Exterior Perspective Any Convenient Fully Rendered¼ illustration board or 15
(Street View) Scale equivalent
Total 100
Notes:
• Use TWO (2)- ¼ illustration (15inches by 20inches) board or any equivalent material. (See
attached photos for references)
• All boards should be fully rendered on any preferred medium with minimal background color.
• Observe ½ inch border line on all sides. Landscape or Portrait orientation.
• Use any convenient scale as long as spaces and labels are visible and readable.
• Follow standard Architectural Drafting following line weights, dimensions, labels, etc.
• For Blowup Details- reflect all fixtures and furniture details
• All outputs will be submitted on the specific date and time only (See Project Timeline)
• A maximum of three (3) members per group, reflect all group members’ names, section and
project title in lower right corner of your boards. (See format)
Surname, First Name | Surname First Name | Surname First Name
BS Architecture 4A
DSGN 425-Project Title
• Drawing plates will be handed to your respective Course instructor only (Refer to your course
instructor for submission details)
• Strict compliance to all requirements, submission date and time will be imposed.