Professional Documents
Culture Documents
TEST FACILITY
York International
Environmental Test Facility
Basildon U.K.
PRODUCT DESIGN & DEVELOPMENT
TEST FACILITY
• Purpose
• Performance Certification under
Eurovent conditions, obtain
independent licensed testing status
and accreditation.
• Sound Power Level Testing to
comply with European legislation.
• Research and Development.
• Speed to the Market place.
PRODUCT DESIGN & DEVELOPMENT
TEST FACILITY
Test Chamber Capabilities
Environmental Capability 1
(For Eurovent Certification)
• Ambient Temperature
maintained to Eurovent
conditions of +/- 1 K between
20 and 50 degrees C.
• Humidity controlled to
Eurovent conditions of 7 DB
& 6 WB degrees C for heat
pump testing.
PRODUCT DESIGN & DEVELOPMENT
Environmental Capability 2
(For R&D)
• Testing Ability at
Controlled Ambient
Temperatures Between
0 and 50 degrees C .
• Cold Soakage Start-Up
at Zero degrees C .
• Chamber Capable for
testing chiller capacities
in excess of 750 kW for
non-Eurovent
conditions.
PRODUCT DESIGN & DEVELOPMENT
Temperature Capability 1
• Chilled Water
Temperatures Between
4 and 20 degrees C .
• Hot Water
Temperatures Between
20 and 60 degrees C.
PRODUCT DESIGN & DEVELOPMENT
Acoustic Capability 1
(50 to 8000 Hz)
• Sound Power measurements
to ISO 3744 on Large Units up
to 7.5m long.
• Allows Measurements to
the Relative Standards.
• Allows to Pin-Point the
Noise Source for R&D.
• Allows noise testing 24
hours.