Professional Documents
Culture Documents
Tla 3t101lf TDK
Tla 3t101lf TDK
http://www.Datasheet4U.com
PULSE TRANSFORMERS
TLA/ALT SERIES
Contents Page
Precautions
The TDK products in this data are intended for usage in general electronics applications (computer, per-
sonal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).
They are neither intend nor warranted for usage in equipment that requires extraordinarily high quality
and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (atomic
energy control instruments, airplane or spaceship instruments, transportation instrument, traffic signal
instruments, combustion control instrument, medical instruments, all types of safety devices, etc.).
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead,
cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and
PBDE, have not been used, except for exempted applications.
(2/33)
Ԁ ӹ
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
ӱ Ӹ N.C. pins: †‣
0.25typ.
„ ‥
1.4
ELECTRICAL CHARACTERISTICS
Inter-winding
Inductance Leakage inductance DC resistance
Turns ratio stray capacitance
(PH)typ.[100kHz] (PH)max.[100kHz] (:)max.
„‟: (pF)max.[100kHz]
Part No. „-‟ „-‟[- shorted] „-‟,-
‡•: „‟-
‡-• ‡-•[- shorted] ‡-•,-
․‥:‧… ‡•-
․-‥ ․-‥[‧-… shorted] ․-‥,‧-…
․‥-‧…
TLA-3T101LF(-T) 1:1 100 0.25 10 0.35, 0.35
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
0.5typ.
…
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
„ ‥
0.25typ.
„‥
1.4
ELECTRICAL CHARACTERISTICS
Inter-winding
Inductance Leakage inductance DC resistance
Turns r atio stray capacitance
(PH)min.[100kHz] (PH)max.[100kHz] (:)max.
„‟: (pF)max.[100kHz]
„-‟ „-‟[- shorted] „-‟, -
Part No. †‡: „‟-
†-‡ †-‡[- shorted] †-‡, -
•‣: †‡-
•-‣ •-‣[ - shorted] •-‣, -
․‥:‧… •‣-
․-‥ ․-‥[‧-… shorted] ․-‥, ‧-…
․‥-‧…
TLA-3T106LF(-T) 1:1 130 0.3 12 0.4, 0.4
TLA-3T107LF(-T) 1:1.41 130 0.3 12 0.4, 0.5
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
0.5typ.
…
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
„ ‥ N.C. pins: ‡•
0.25typ.
„‥
1.4
ELECTRICAL CHARACTERISTICS
Inter-winding
Inductance Leakage inductance DC resistance
Turns ratio stray capacitance
(PH)min.[100kHz] (PH)max.[100kHz] (:)max.
Part No. „‟†: (pF)max.[100kHz]
„-† „-†[- shorted] „-†
‣․‥: ‧… „†-
‣-‥ ‣-‥[ -… shorted] ‣-‥
‣‥- …
1CT:1CT 130 0.3 12 0.5
TLA-3T105LF(-T)
1CT:1CT 130 0.3 12 0.5
2CT:1CT 130 0.95 12 0.5
TLA-3T109LF(-T)
1CT:1CT 130 0.35 12 0.5
1CT:1CT 130 0.35 12 0.5
TLA-3T110LF(-T)
1CT:1.41CT 130 0.35 12 0.5
1CT:1CT 130 0.35 12 0.85
TLA-3T112LF(-T)
1CT:2.5CT 130 0.35 12 0.85
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
0.8typ.
… RX
TDK∗∗∗
12.5±0.3
‟ ‣
9.3typ.
Part No.
Lot No.
† •
1CT:1CT
„ ‥
0.25typ.
TX
∗∗∗: Country of origin
‧
0.45typ. 0.10max. Dimensions in mm
N.C. pins: ‡‥…
RECOMMENDED PC BOARD PATTERN
17.78
… Primary signal pattern
(connected No.„-†, -)
keep out area
13.72
8.64
5.0
„ ‥
2.54
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. : ‧ [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
„†‟ : ․•‣ -‧ - ‧ - ‧
․-‣ ․‣-„‟ „‟-․‣
1CT:1CT 350 1 25
TLA-6T103LF(-T)
1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 600pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 16 2 4 13.1 6.1
20.2
44 ± 0.3
(25.9)
40.4
1.7
0.4
Dimensions in mm
REEL DIMENSIONS
2±0.5 ø330typ.
ø21±0.8 ø13±0.2
50.4max.
Dimensions in mm
165±15˚C
Time(s)
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
„ ‥
0.25typ. TX RX
N.C. pins: ‡•
„‥
1.4
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. „‟† : [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
‣․‥ : ‧… - „†- „†-
-… …-‣‥ ‣‥- …
1CT:1CT 350 1 25
TLA-6T118LF(-T)
1CT:1CT 350 1 25
1.41CT:1CT 350 2 25
TLA-6T119LF(-T)
1CT:1CT 350 1 25
2CT:1CT 350 3.5 25
TLA-6T120LF(-T)
1CT:1CT 350 1 25
1CT:1.41CT 350 2.5 25
TLA-6T121LF(-T)
1CT:1CT 350 1 25
1.25CT:1CT 350 2 25
TLA-6T122LF(-T)
1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
„ ‥
0.25typ. TX RX
N.C. pins: ‡•
„‥
1.4
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. „‟† : [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
‣․‥ : ‧… - „†- „†-
-… …-‣‥ ‣‥- …
1CT:1CT 350 1 25
TLA-6T127LF(-T)
1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
…
TDK∗∗∗
9.2±0.2
6.8typ.
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥
„ ‥
0.25typ. TX RX
N.C. pins: ‡•
„‥
1.4
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. „‟† : [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
‣․‥ : ‧… - „†- „†-
-… …-‣‥ ‣‥- …
1CT:1CT 350 1 25
TLA-6T133WLF(-T)
1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 5.9
11.5
24 ± 0.3
(12.4)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
…
TDK∗∗∗
9.47±0.2
8.37typ.
1CT:1CT
1CT:1CT
Part No.
Lot No.
„ † ‣ ‥ „ ‟ † ‣ ․ ‥
0.25typ.
TX RX
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. „†‟: [DC bias 8mA, 100kHz] [0.1 to 125MHz] (pF)max.[100kHz]
․‣‥:‧ … - „‟- „‟-
‧-… ‧…-․‥ ‧…-․‥
1CT:1CT 350 1 25
TLA-6T214ALF(-T)
1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 2.2
11.5
24±0.3
(13.4)
0.3
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
Time(s)
Ӽ ӷ
TDK∗∗∗
9.47±0.25
8.5typ.
1CT:1CT
1CT:1CT
Part No.
Lot No.
„ ‣ „ ‟†Ӵӵ Ӷ
0.2typ.
TX RX
∗∗∗: Country of origin
0.45typ. 1.27typ.
0.10max. Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
Part No. „†‟: ‧ [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
•‡‣:‥…․ - „‟- „‟-
‥-․ ‥․-•‣ ‥․-•‣
TLA-6T213LF(-T) 1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 2.2
7.5
16±0.3
(8.8)
0.3
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
22.4max.
Dimensions in mm
Time(s)
TDK∗∗∗
9.47±0.25
8.5typ.
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
Part No.
Lot No.
„ Ӽ „ ‟†Ӵӵ Ӷ ․ ‥ … ‧
0.2typ.
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
„†‟:‵″‴ [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
Part No. •‡‣:‱′‰ ‵-‴ „‟-‵‴ „‟-‵‴
․…‥: ‱-‰ •‣-‱‰ •‣-‱‰
‧ : - ․‥- ․‥-
- - -
TLA-7T201LF(-T) 1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1500pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 10 2.2
11.5
24±0.3
(16.2)
0.3
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
Time(s)
⁅ ′
0.8typ.
15.7±0.25
TDK ∗∗∗
12.2typ.
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
1CT:1CT
Part No.
Lot No.
„ ‟ † ‡ • ‣ ․ ‥ … ‧ ‰ ‱
„ ‱ 0.25typ. TX RX RX TX TX RX RX TX
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns r atio (PH)min. (dB)max. stray capacitance
Part No. „†‟:⁅⁃⁄..... [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
‡†•:⁂⁃⁁..... ⁅-⁄...... „‟-⁅⁄..... „‟-⁅⁄.....
⁂-⁁...... ‡•-⁂⁁..... ‡•-⁂⁁.....
1CT:1CT 350 1 40
TLA-6T406(-T)
1CT:1CT 350 1 40
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 500pieces/reel
TAPE DIMENSIONS
2
1.75
ø1.5+0.1, -0 16.1 4 6
20.2
44 ± 0.3
(26.3)
40.4
1.7
0.5 ± 0.05
20
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
50.4max.
Dimensions in mm
Time(s)
0.5typ.
‵
TDK∗∗∗
9.14±0.2
6.74typ.
Part No.
Lot No.
0.25typ.
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss Inter-winding
Turns ratio (PH)min. (dB)max. stray capacitance
‟„† : ‴‵″ [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz]
Part No. •‡‣ : ‱′‰ ‴-″ ‟†-‴″ ‟†-‴″
‥․… : ‱-‰ •‣-‱‰ •‣-‱‰
‧ : - ‥…- ‥…-
- - -
TLA-7T101LF(-T) 1CT:1CT 350 1 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 1000pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 12 2 4 9.8 5.9
11.5
24 ± 0.3
(15.9)
0.4
Dimensions in mm
REEL DIMENSIONS
ø330typ.
2±0.5
ø21±0.8 ø13±0.2
30.4max.
Dimensions in mm
165±15˚C
Time(s)
‟ ₸
13.85±0.5
† ₹
RX
₾ ₷ ‡ ₺
PCB CABLE
• ₻
3.2typ.
3.2typ.
‣ ₼
75Ω
75Ω
75Ω
․ ₽
Dimensions in mm ‥ ₾
0.001μF 75Ω
N.C. pin: ․
‟ ‡ ‣ ‥
8.89typ.
2-ø1.6 „† • ․
21.45typ.
3.05typ.
10.92typ.
2-ø3.25
11.43typ.
15.75typ.
16.0typ. Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss
Turns ratio (PH)min. (dB)max.
Part No. „†‟:₷₸ [DC bias 8mA, 100kHz] [0.1 to 100MHz]
‡‣•:₹₼ ₷-₸ „‟-₷₸
₹-₼ ₹₼-‡•
1CT:1 200 1.5
TLA-6T776F
1CT:1 200 1.5
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Tray : 360pieces/box
5±1s
255˚C max.
Natural
cooling
130˚C
90˚C
Preheating: 30 to 45s
Time(s)
† ₹
RX
‡ ₺
18.2±0.5
PCB CABLE
• ₻
₾ ₷
‣ ₼
75Ω
75Ω
75Ω
․ ₽
‥ ₾
0.001μF 75Ω
Dimensions in mm
N.C. pin: ․
3.05typ.
․ • † „ 2-ø2.1
‥ ‣ ‡ ‟
2.54typ.
8-ø0.9 1.27typ.
8.89typ.
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance Insertion loss
Turns ratio (PH)min. (dB)max.
Part No. „†‟:₷₸ [DC bias 8mA, 100kHz] [0.1 to 100MHz]
‡‣•:₹₼ ₷-₸ „‟-₷₸
₹-₼ ₹₼-‡•
1CT:1 200 1.5
TLA-6T785
1CT:1 200 1.5
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Tray : 500pieces/box
5±1s
255˚C max.
Natural
cooling
130˚C
90˚C
Preheating: 30 to 45s
Time(s)
LC Modules
…
TX
TDK∗∗∗
12.5±0.3
9.5typ.
† L.P. FILTER ‣
Part No.
Lot No.
• ․
1CT:1CT
„ ‥ L.P. FILTER …
0.25typ.
RX
∗∗∗: Country of origin
L.P. FILTER
0.45typ. 0.10max. Dimensions in mm
‧
N.C. pins: ‟‡
RECOMMENDED PC BOARD PATTERN
17.78
13.72
2.54
2.54 1.02
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Insertion loss Attenuation Impedance C.M.R.R.
(dB)max.[5 to 10MHz] (dB)min.[30 to 100MHz] (:)typ.[5 to 10MHz] (dB)min.[1 to 100MHz]
Part No.
„†-‥‣ „†-‥‣ „-†, ‥-‣ „†-‥‣
… - … - -, …- -…
1 25 100, 100 25
TLA-3M103LF(-T)
1 25 100, 100 25
• Ta=25°C
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
PACKAGING STYLES
Quantity : 600pieces/reel
TAPE DIMENSIONS
1.75
ø1.5+0.1, -0 16 2 4 13.1 6.1
20.2
44 ± 0.3
(25.9)
40.4
1.7
0.4
Dimensions in mm
REEL DIMENSIONS
2±0.5 ø330typ.
ø21±0.8 ø13±0.2
50.4max.
Dimensions in mm
165±15˚C
Time(s)
ALT4532
W
• Product conforming to RoHS directive.
2 5
APPLICATIONS 1 6
PRODUCT IDENTIFICATION
T
ALT 4532 - 201 - T 001
(1) (2) (3) (4) (5)
Dimensions in mm
(1) Series name
Type L W T
(2) Dimensions LuW ALT4532-171-T001 4.5±0.2 3.2±0.2 2.2max.
(3) Inductance[at 100kHz/DC bias=8mA] ALT4532-201-T001 4.5±0.2 3.2±0.2 2.9max.
201 : 200μH min.
(4) Packaging style RECOMMENDED PC BORARD PATTERN
T: ø330mm reel taping 1.45 1.45
0.45
(5) TDK internal code
0.675 1.35
SPECIFICATIONS
Operating –40 to +85°C
0.45
Temperature range
Storage(After mount) –40 to +85°C
0.5
1.1
Packaging style Reel Quantity Dimensions in mm
Taping ø180mm 2000 pieces/reel
MEASURING CIRCUIT
3 4
5
2
1 6
ELECTRICAL CHARACTERISTICS
Inductance
Insertion loss Inter-winding
(μH)min.
Turns ratio (dB)max. stray capacitance
Part No. [DC bias 8mA, 100kHz]
„‣‟ : •†‡ [0.1 to 100MHz] (pF)max.
„-‟ „‟-•‡ [100kHz]
•-‡
ALT4532-171-T001 1CT : 1CT 170 2.5 35
ALT4532-201-T001 1CT : 1CT 200 1.5 35
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Insertion loss(dB)
–1.0 –1.0
–2.0 –2.0
–3.0 –3.0
–4.0 –4.0
0.1 1 10 100 0.1 1 10 100
Frequency(MHz) Frequency(MHz)
LAN LAN
IC Connector
Note) Peripheral circuits differ depending on the IC used; check the circuits with the application note of the IC, etc.