Professional Documents
Culture Documents
/K1B
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
Ver. 3
SR5009 Please refer to the
MODIFICATION NOTICE.
START::|g1cz3Z09ximWbk6cjE4rRA==|uZ/na7vhgnRE2HCdmGp1kuwPvYVXX1XpD9h453Y6Izs=|eUrDXxuRe/sumOwwJO
Contents
ABOUT THIS MANUAL..............................................................3 CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK..............93
What you can do with this manual.............................................3 LEVEL DIAGRAM.....................................................................94
Using Adobe Reader (Windows version)...................................4 BLOCK DIAGRAM..................................................................100
SAFETY PRECAUTIONS...........................................................6 POWER DIAGRAM.................................................................101
NOTE FOR SCHEMATIC DIAGRAM..........................................7 WIRING DIAGRAM.................................................................102
NOTE FOR PARTS LIST............................................................7 PRINTED WIRING BOARDS..................................................103
TECHNICAL SPECIFICATIONS.................................................9 SCHEMATIC DIAGRAMS (1/32)............................................110
DIMENSION................................................................................9 01-HDMI SW1........................................................................110
Precautions During Service...................................................10 02-HDMI SW2........................................................................ 111
Initializing This Unit..................................................................10 03-NET_PHY.........................................................................112
Service Jigs..............................................................................10 04-BlueTooth..........................................................................113
DISASSEMBLY.........................................................................11 05-CPU_LEVEL_CHG...........................................................114
1. FRONT PANEL ASSY.........................................................13 06-DIGITAL_CNT...................................................................115
2. RADIATOR ASSY................................................................14 07-CPU..................................................................................116
3. HDMI PCB...........................................................................15 08-Sub_CPU..........................................................................117
4. VIDEO PCB.........................................................................16 09-FRONT_HDMI..................................................................118
5. PREOUT PCB.....................................................................16 10-DSP...................................................................................119
6. MAIN PCB..........................................................................17 11-ADV8003...........................................................................120
7. SMPS PCB..........................................................................18 12-ADV8003_DDR.................................................................121
8. TRANS POWER.................................................................18 13-D.SUPPLY.........................................................................122
SPECIAL MODE.......................................................................19 14-HDMI_TX..........................................................................123
Special Mode Configuration Buttons........................................19 15-DIR_A.PLD.......................................................................124
1. Version Display Mode.........................................................20 16-V.PLD................................................................................125
2. PANEL / REMOTE LOCK Selection Mode..........................23 17-MAIN_DAC.......................................................................126
3. Selection Modes for Service-related Operations.................24 18-ADV7850...........................................................................127
DIAGNOSTIC PATH DIAGRAM...............................................27 19-CX870JUNCTION.............................................................128
4. Protection Pass Mode.........................................................51 20-INPUT...............................................................................129
5. CX870 / CY920 Reboot mode.............................................51 21-VIDEO_ZONE2.................................................................130
6. CX870 / CY920 Initialization mode.....................................52 22-VIDEO_FCNT...................................................................131
23-VIDEO_RC5......................................................................132
JIG FOR SERVICING...............................................................53
24-AMP1................................................................................133
Procedure after Replacing the Microprocessor, etc............56
25-AMP2................................................................................134
Firmware Update Procedure..................................................56 26-MAIN_SPK........................................................................135
1. Updating by USB.................................................................56 27-MAIN_TUNER_REG.........................................................136
2. Updating by DPMS..............................................................65 28-MAIN_RS232-CNT...........................................................137
ADJUSTMENT..........................................................................72 29-FRONT..............................................................................138
SURROUND MODES AND PARAMETERS.............................73 30-SMPS................................................................................139
TROUBLE SHOOTING.............................................................75 31-HDAM...............................................................................140
1. POWER...............................................................................75 31-PREOUT...........................................................................141
2. Analog video.......................................................................76 EXPLODED VIEW ..................................................................142
3. HDMI/DVI............................................................................80 PACKING VIEW......................................................................143
4. AUDIO.................................................................................82 SEMICONDUCTORS..............................................................144
5. Network/Bluetooth/USB......................................................85 1. IC's....................................................................................144
6. SMPS..................................................................................90 2. FL DISPLAY......................................................................163
2
ABOUT THIS MANUAL
Read the following information before using the service manual.
CP401
v
F
Shift
Ctrl
3
Using Adobe Reader (Windows version)
Ctrl Space
• Properties
Click this button and check that the printer is set to a
suitable paper size.
• Page to print
Select the following checkbox.
"More Options" : "Current View"
• Page Sizing & Handling
Select the following checkbox.
"Size" / "Size Options" : "Fit"
4
Magnify schematic / printed circuit Magnify schematic / printed circuit
board diagrams - 2 board diagrams - 3
(Pan & Zoom function) (Loupe Tool function)
The Pan & Zoom function lets you see which part of The Loupe Tool function lets you magnify a specific
a magnified diagram is being shown in a separate part of a diagram in a separate window.
window.
[Example using Adobe Reader X]
[Example using Adobe Reader X] On the "View" menu, point to "Zoom", and then click
On the "View" menu, point to "Zoom", and then click "Loupe Tool".
"Pan & Zoom".
5
SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
leakage current check
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state
(on, off and standby mode), if applicable.
CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in their
etc. Be sure to heed these cautions and the cautions original positions, check that no serviced parts have
described in the handling instructions. deteriorate the area around. Then make an insulation
◎◎ Cautions concerning electric shock! check on the external metal connectors and between
(1) A n AC voltage is impressed on this set, so if you the blades of the power plug, and otherwise check that
touch internal metal parts when the set is energized, safety is ensured.
you may get an electric shock. Avoid getting an (Insulation check procedure)
electric shock, by using an isolating transformer Unplug the power cord from the power outlet, disconnect
and wearing gloves when servicing while the set is the antenna, plugs, etc., and on the power. Using a 500V
energized, or by unplugging the power cord when insulation resistance tester, check that the insulation
replacing parts, for example. resistance value between the inplug and the externally
(2) There are high voltage parts inside. Handle with exposed metal parts (antenna terminal, headphones
extra care when the set is energized. terminal, input terminal, etc.) is 1MΩ or greater. If it is
◎◎ C
aution concerning disassembly and less, the set must be inspected and repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs on
the edges of parts. The burrs could cause injury if fingers
are moved across them in some rare cases. Wear gloves CAUTION Concerning important
to protect your hands. safety parts
◎◎ Use only designated parts! Many of the electric and the structural parts used in the
The set's parts have specific safety properties (fire set have special safety properties. In most cases these
resistance, voltage resistance, etc.). Be sure to use parts properties are difficult to distinguish by sight, and the use
which have the same properties for replacement. The of replacement parts with higher ratings (rated power
burrs have the same properties. In particular, for the and withstand voltage) does not necessarily guarantee
important safety parts that are indicated by the z mark that safety performance will be preserved. Parts with
on schematic diagrams and parts lists, be sure to use safety properties are indicated as shown below on the
the designated parts. wiring diagrams and the parts list in this service manual.
◎◎ B
e sure to mount parts and arrange the wires Be sure to replace them with the parts which have the
as they were originally placed! designated part number.
For safety seasons, some parts use tapes, tubes or other
insulating materials, and some parts are mounted away (1) Schematic diagrams........Indicated by the z mark.
from the surface of printed circuit boards. Care is also (2) Parts lists........Indicated by the z mark.
taken with the positions of the wires by arranging them The use of parts other than the
and using clamps to keep them away from heating and designated parts could cause electric
high voltage parts, so be sure to set everything back as shocks, fires or other dangerous
it was originally placed. situations.
6
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check.
If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the
set is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
ALL CAPACITANCE VALUES ARE EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.
1MΩ
CBA
CBA
1MΩ
Conductive Sheet or
Copper Plate
7
Personal notes:
8
TECHNICAL SPECIFICATIONS
nn Audio section
nn Wireless LAN section
• Power amplifier
Network type
Rated output : (wireless LAN standard): Conforming to Wi-Fi®z1
Front : Security : WEP 64 bit, WEP 128 bit
100W+100W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.) WPA/WPA2-PSK (AES)
140W+140W(6Ω, 1kHz with 0.7% T.H.D) WPA/WPA2-PSK (TKIP)
Center :
Radio frequency : 2.4 GHz
100W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)
140W(6Ω, 1 kHz with 0.7 % T.H.D.)
No. of channels : 1 - 11 ch (for U)
Surround : 1 - 13 ch (for N, K)
100W+100W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.)
140W+140W(6Ω, 1 kHz with 0.7 % T.H.D.) z1 T
he Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
Surround back:
100W+100W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.) nn Bluetooth section
140W+140W(6Ω, 1 kHz with 0.7 % T.H.D.)
Output connectors : 4 - 16Ω Communications system : B
luetooth Version 2.1 + EDR
(Enhanced Data Rate)
nn Analog section
Transmission power : Maximum 2.5 mW (Class 2)
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response : 10 Hz - 100 kHz — +1, -3 dB(Direct mode) Maximum communication range : Approx. 32.8 ft/10 m 2 in line of sight
S/N : 100 dB(IHF-A weighted, Direct mode)
Frequency band : 2.4 GHz band
nn Video section
• Standard video connectors Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
Input/output level and impedance : 1 Vp-p, 75 Ω Supported profiles : A
2DP 1.2 (Advanced Audio Distribution Profile)
Frequency response : 5 Hz – 10 MHz — 0, –3 dB AVRCP 1.4 (Audio Video Remote Control Profile)
• Color component video connector
Corresponding codec : SBC, AAC
Input sensitivity/Input impedance : Y signal — 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω Transmission range (A2DP) : 20 Hz - 20,000 Hz
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response : 5 Hz - 60 MHz — 0, -3 dB nn General
nn Tuner section Power supply : (for U) : AC 120 V, 60 Hz
FM (for N) : AC 230 V, 50 Hz / 60Hz
(for K) : AC 220 V, 50 Hz
Reception frequency range : FM 87.5 MHz - 107.9 MHz(for U)
FM 87.5 MHz - 108.0 MHz(for N, K) Power consumption : 650W
AM 520 kHz - 1710 kHz(for U) Power consumption in standby mode : 0.2W
AM 522 kHz - 1611 kHz(for N, K)
Power consumption in CEC standby mode : 0.5W
Effective sensitivity : FM 1.2μV(12.8dBf)
AM 18 μV Power consumption in network standby mode : 2.7W
For purposes of improvement, specifications and design are subject to
50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf) change without notice.
S/N: MONO ― 70 dB (IHF-A weighted, Direct mode)
STEREO ― 67 dB (IHF-A weighted, Direct mode)
Distortion : MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz)
DIMENSION
Unit: Unit : in. (mm) Weight: 22 lb 11 oz (10.3 kg)
1 17/64
(32)
2 23/32
(69)
11 47/64 (298)
6 1/2 (165)
13 5/8 (346)
2 33/64
(64)
(16)
5/8
17 21/64 (440)
5 53/64 (148)
6 11/32 (161)
9 1/16 (230)
33/64
(13)
2 11/64
(55)
1 31/32 (50) 13 25/64 (340) 1 31/32(50)
9
PRECAUTIONS DURING SERVICE
Initializing This Unit
Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the digital PCB.
NOTE: • If the status in step 3 does not occur, start again from step 1.
• Initializing the device restores settings configured by the user to the factory settings. Take note of your settings beforehand
and reconfigure them after initialization.
X TUNER TUNER
PRESET CH - PRESET CH +
Service Jigs
The following jigs (extension cable kit) are used when repairing the PCBs.
Order the jigs from your dealer if necessary.
10
DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read "Precautions During Work" before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the
work. Failure to shape the wires correctly may cause problems such as noise.
TOP COVER
11
Explanatory Photos for DISASSEMBLY
• The angles from which the photos are taken are shown by "Photo angle: A, B, C, D".
• See the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the unit.
• The photograph is SR5009K model.
The viewpoint of each photograph d
(Shooting direction:X)[View from the top]
↓Shooting direction: B↓ Front side
Shooting Shooting
direction: D direction: C
↑Shooting direction: A↑
12
1. FRONT PANEL ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY
(1) Remove the screws.
(2) Cut the wire clamp, then remove the connector wires and FFC. Remove the STYLE PIN.
Remove the HOLDER and screws.
Front side
CP4400
STYLE PIN
HOLDER
CUT FFC
STYLE PIN STYLE PIN
FFC
N7002
N7005
d
13
2. RADIATOR ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY → RADIATOR ASSY
(1) Remove the screws.
STYLE PIN
CP401
CP402 CP405
CP403
14
3. HDMI PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB
(1) Remove the screws.
(2) Cut the wire clamp, then remove the connector wires and FFC.
Front side
STYLE PIN
CUT N1019
FFC
FFC
CON1 N1029
CON2
N7002
N7005
STYLE PIN d
N1018 N1033
N1014
N1015
N1013
N1016
15
4. VIDEO PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → VIDEO PCB
(1) Remove the connector wire.
Front side
CN5003
5. PREOUT PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → VIDEO PCB → PREOUT PCB
(1) Remove the connector wire.
Front side
CN5601
TO CP401
CN5602
16
6. MAIN PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → VIDEO PCB → PREOUT PCB
→ MAIN PCB
(1) Remove the screws.
View from the bottom
CP402 CP405
CP403
CN4001
CP5003
17
7. SMPS PCB
Proceeding : TOP COVER → BACK CHASSIS → SMPS PCB
(1) Remove the connector wire. Remove the screws.
CP4142
TO HDMI PCB
N1029
8. TRANS POWER
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → TRANS POWER
See "EXPLODED VIEW" for instructions on how to remove each PCB of the "TRANS POWER".
18
SPECIAL MODE
Special Mode Configuration Buttons
b No. 1 - 12 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b No. 13: Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
19
1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
Hold down buttons "DIMMER" and "STATUS" at the same time and press the power button to turn on the power.
Press the "STATUS" button after this to show the information in section 1.3 on the display.
b A version list is also displayed on GUIs while the version appears on the display.
FLD L2 L1 N E T M A C
L3 FLD L2 * * * * * *
* * . * *
L3 - * * * * * *
y Audio PLD :
L1 A . P L D Q3 BT MAC ADDRESS information :
FLD L2 L1 B T M A C
L3 FLD L2 * * * * * *
* * . * *
L3 - * * * * * *
20
1.4. Error display
See the table below for descriptions of displayed errors and countermeasures for these.
Display order is q,w,e,r,t,y,u.
Condition States Display TROUBLE SHOOTING
L1 M A I N
–
" ▲ " or " ▼ " is displayed as the first character if
the firmware is not correct (see right section of FLD L2 * * * * * * * *
table). L3 B L - * * . * *
L1 S U B
–
•Check the resistor for set-
FLD L2 X X Y Z * * * *
q ting region(R1428 / R1431,
Firm Check L3 B L - * * . * * HDMIPCB).
NG L1 D S P •Write the firmware for the
–
correct region.
FLD L2
L3 * * . * *
L1 A . P L D
–
FLD L2
L3 * * . * *
L1 G U I
–
FLD L2
L3 * * . * *
w L1 E 2 P R O M
•Check the SUB(U1020) and
SUB μ -COM There is not a reply from SUBμ-COM. FLD L2 E R R O R surrounding circuits.
NG L3 * * *
An error occurs in Loopback Test of the DDR L1 I P •Check the circuits around
memory to perform at initial setting of i/p FLD L2 S C A L E R the IP SCALER (U1026,
Scaler(ADV8003). HDMI PCB) and DDR2
e L3 E R R 0 1 (U1028/1029).
IP SCALER NG
In initial setting of i/p Scaler ( ADV8003 ) , there If there appear to be no prob-
is not the reply of the Loopback Test result of FLD L3 E R R 0 2 lems, U1026 or U1028/1029 is
the DDR memory . faulty.
L1 E 2 P R O M
u An error occurred in a checksum of the EE-
FLD L2 E R R O R
EEPROM NG PROM(*** is a block address number).
L3 * * *
21
1.5. Version Display in the Setup Menu
Follow the steps below to display the firmware information.
The version information is displayed as a 12-digit number as shown in the screenshot below.
General/Firmware
Version XXXX-XXXX-XXXX
GUI Image
This 12-digit number comprises part of the version number of each device and module.
These version numbers correspond to the 12-digit number as shown below.
b The firmware version numbers and this 12-digit version information are written in the Service Information.
22
2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Turn the PANEL LOCK and REMOTE LOCK modes on and off.
2.2. Starting up
Hold down buttons "M-DAX" and "ZONE2 SOURCE" at the same time and press the power button to turn on the power.
Select the mode using the button "TUNER PRESET CH+", and press the button "STATUS" to commit the selection.
q
L1 P / V L O C K
FLD L2 * O N
L3
The buttons on the unit and the master volume knob cannot be operated.
w
L1 P P L O C K
FLD L2 O N
L3
The buttons on the unit cannot be operated.
e
L1 P P L O C K
FLD L2 O F F
L3
The PANEL LOCK mode is turned off.
r
L1 R C L O C K
FLD L2 O N
L3
The device cannot be operated by the remote control.
t
L1 R C L O C K
FLD L2 * O F F
L3
The REMOTE LOCK mode is turned off.
23
3. Selection Modes for Service-related Operations
3.1. Actions
Select diagnostic mode (service path check mode), protection history display mode, or 232C standby clear mode.
3.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
q
L1 1 S E R V I C E
FLD L2 C H E C K
L3
Service Path Check Mode:
The Video and Audio paths can be checked.
This function is convenient for confirming problem paths in the product and executing a path
check after repair.
w
L1 2 P R O T E C T
FLD L2
L3
The protection history can be checked.
e
L1 3 R S 2 3 2 C
FLD L2 R E S E T
L3
Switches from 232C standby mode to normal standby mode.
r
L1 4 O P I N F O
FLD L2
L3
Operation Info for the unit can be checked.
t
L1 5 T U N E R
FLD L2 F R E Q
L3
Enables reception STEP of the ANALOG TUNER to be changed.
24
3.4. DIAGNOSTIC MODE (Service Path Check Mode)
3.4.1. Actions
This function is convenient for confirming problem paths in the product and executing a path check after repair.
The Video and Audio paths can be checked.
The backup data is not rewritten.
3.4.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
Select the mode using the button "TUNER PRESET CH+", and press the button "STATUS" to commit the selection.
Select "1. SERVICE CHECK" and press the "STATUS" button to start the diagnostic mode.
The "TUNED", "STERO" and "RDS" segments are lit in this mode.
Video Convert Upper Input Source : CBL/SAT ・Check of CVBS input ⇒ IP Scaler ⇒ HDMI output.
(Analog or HDMI ⇒ HDMI)
V 0 2 C O N V . Video Convert(IP Scaler) : ON, All sources ・Check of CVBS input ⇒ CVBS output.
Lower * * * . * d B IP Scaler : "Analog & HDMI", All sources ・Check of Component input ⇒ IP Scaler ⇒ HDMI output.
1 Resolution : "Auto", All sources ・Check of Component input ⇒ Component output.
fig.01 MAIN ZONE ON ・Check of HDMI input ⇒ IP Scaler ⇒ HDMI output.
ZONE2 OFF ・Check of ETHERNET input ⇒ IP Scaler ⇒ HDMI output.
(※ The input source can be switched to any source except CBL/SAT.)
HDMI pass Upper Input Source : CBL/SAT ・Check of HDMI input(MAIN Function)⇒ HDMI output(MAIN)
(MAIN ZONE)
V 0 3 H D M I Source of Video Convert(IP Scaler) : OFF, All sources (※ The input source can be switched to any source except CBL/SAT.)
2 fig.02 Lower * * * . * d B MAIN ZONE ON
ZONE2 OFF
HDMI CEC Upper Input Source : CBL/SAT ・When the power supply of a TV is put in the standby mode, make sure that the
V 0 4 C E C HDMI Control : ON power supply of this unit is also put in the standby mode.
fig.03 Lower
3 * * * . * d B MAIN ZONE ON ・The ARC path can also be checked (check this using the TV input source).
ZONE2 OFF (※ The input source can be switched to any source except CBL/SAT.)
HDMI Audio Upper Input Source : CBL/SAT ・Check of HDMI input(PCM , DolbyDigital , DTS) ⇒ Speaker output.
(Audio: AVR) fig.04a V 0 5 H - A V R HDMI Control : OFF ・Check of HDMI input(HD audio) ⇒ Speaker output.
4
fig.04b Lower * * * . * d B HDMI Audio:AVR ( if checking the audio output from AVR ) (※ The input source can be switched to any source except CBL/SAT.)
HDMI Audio Upper HDMI Audio:TV ( if checking the audio output from TV ) ・Check of HDMI input(PCM , DolbyDigital , DTS) ⇒ HDMI output (audio output
(Audio: TV)
V 0 6 H - T V from connected TV)
5 fig.05 Lower * * * . * d B (※ The input source can be switched to any source except CBL/SAT.)
GUI Upper Input Source : CBL/SAT ・Check of GUI display ⇒ HDMI output.
V 0 7 M E N U Video Convert(IP Scaler) : ON, All sources (※ The input source can be switched to any source except CBL/SAT.)
Lower * * * . * d B IP Scaler : "Analog & HDMI", All sources
6 fig.06 Resolution : "AUTO", All sources
Setup Menu ON
MAIN ZONE ON
ZONE2 OFF
25
3.4.6. Audio system confirmation items
fig. XX: See the block diagram of the fig.XXth.
Analog ( pass ) Upper Input Source: CBL/SAT ・Check the audio output.
A 0 1 A N L G Input Mode: ANALOG fixed ・Check of Analog input ⇒ Speaker output.
fig.07 Lower * * * . * d B Sound mode: DIRECT Front L/R
1
Amp assign: Surround Back (※ The input source can be switched to any source except CBL/SAT.)
MAIN ZONE: ON
ZONE2: OFF
DIGITAL Upper Input Source : CBL/SAT ・Check the audio output.
(MAIN)
A 2 D I G . Input Mode : DIGITAL fixed ・Check of Digital input ⇒ Speaker output.
fig.08a
Lower * * * . * d B Sound mode: MULTI CH STEREO Front L/R、Center、Surround L/R、Surround Back L/R
fig.08b
2 Amp assign : Surround Back ・Check of Digital(PCM) input ⇒ Preout output.
Speaker Config all Speaker=Small / SW=Yes(2ch) Front L/R、Center、Surround L/R、Surround Back L/R、Subwoofer
MAIN ZONE ON (※ The input source can be switched to any source except CBL/SAT.)
ZONE2 OFF
DIGITAL Upper Input Source : NETWORK ・Check the audio output.
(ZONE2)
A 0 3 Z 2 D I G Input Mode : Auto ・Digital(PCM) input ⇒ Speaker output
fig.09a Lower * * * . * d B Sound mode: STEREO Surround Back (ZONE2) L/R
3
fig.09b Amp assign : ZONE2 ・Digital(PCM) input ⇒ Preout output
MAIN ZONE: ON ZONE2 L/R
ZONE2: ON
HDMI Upper Input Source : CBL/SAT ・Check the audio output.
A 0 5 H D M I Input Mode : HDMI fixed ・HDMI input ⇒ Speaker output.
fig.10a Lower * * * . * d B Sound mode: STEREO Front L/R
4
fig.10b Amp assign : Surround Back (※ The input source can be switched to any source except CBL/SAT.)
MAIN ZONE: ON
ZONE2: OFF
Analog AD Upper Input Source : CBL/SAT ・Check the audio output.
(MAIN)
A 0 6 A D Input Mode : Analog fixed ・Check of Analog input ⇒ Speaker output.
fig.11a Lower * * * . * d B Sound mode: MULTI CH STEREO Front L/R、Center、Surround L/R、Surround Back L/R
fig.11b Vol -20dB ・Check of Analog input ⇒ Pre OUT.
5
Amp assign : Surround Back Front L/R、Center、Surround L/R、Surround Back L/R、Subwoofer
Speaker Config all Speaker=Small / SW=Yes(2ch) (※ The input source can be switched to any source except CBL/SAT.)
MAIN ZONE: ON (※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2: OFF when Absolute settings are used)
Analog Amp Assign Upper Input Source : CBL/SAT ・Check the audio output.
(Amp Assign: ZONE2)
A 0 7 Z 2 A S S Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
Lower * * * . * d B Sound mode: STEREO Surround Back(ZONE2) L/R
fig.12 Z2 Source : Source ・Check of Analog input ⇒ Pre OUT.
6
Vol -20dB ZONE2 L/R
Amp assign : ZONE2 (※ The input source can be switched to any source except CBL/SAT.)
MAIN ZONE: ON (※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2: ON when Absolute settings are used)
Analog Amp Assign Upper Input Source : CBL/SAT ・Check the audio output.
(Amp Assign: Bi-Amp)
A 1 1 B i A M P Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
Lower * * * . * d B Sound mode: MULTI CH STEREO Surround Back L/R
7 fig.13 Amp assign : Bi-Amp (※ The input source can be switched to any source except CBL/SAT.)
MAIN ZONE ON (※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2 OFF when Absolute settings are used)
Front Height Upper Input Source : CBL/SAT ・Check the audio output.
A 1 4 F H Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
fig.14a Lower * * * . * d B Sound mode: MULTI CH STEREO Surround Back L/R
8 fig.14b Vol -20dB (※ The input source can be switched to any source except CBL/SAT.)
Amp assign : Front Height ・Check of PREOUT output.
MAIN ZONE ON (※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2 OFF when Absolute settings are used)
26
DIAGNOSTIC PATH DIAGRAM
fig.01
ADV8195 TMDS IN
FRONT HDMI BUFFER TMDS OUTPUT
HDMI OUT1
TMDS IN
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
HDMI5 HDMI2.0 VIDEO DECODER HDMI i/p Scaler_TX_OSD
Matix SW ADV7850 AD55-058Z-0
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data
CX870 MODULE
VBUS
DATA- USBD-
USB FRONT DATA+ USBD+
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
27
fig.02
ADV8195 TMDS IN
FRONT HDMI BUFFER TMDS OUTPUT
HDMI OUT1
TMDS IN
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
HDMI5 HDMI2.0 VIDEO DECODER HDMI i/p Scaler_TX_OSD
Matix SW ADV7850 AD55-058Z-0
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data
CX870 MODULE
VBUS
DATA- USBD-
USB FRONT DATA+ USBD+
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
28
fig.03
ADV8195 TMDS IN
FRONT HDMI BUFFER TMDS OUTPUT
HDMI OUT1
TMDS IN
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4 SUB uCOM
HDMI Rx
HDMI5 HDMI2.0 VIDEO DECODER HDMI i/p Scaler_TX_OSD
Matix SW ADV7850 AD55-058Z-0
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data
CX870 MODULE
VBUS
DATA- USBD-
USB FRONT DATA+ USBD+
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
29
fig.04a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
30
fig.04b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
31
fig.05 TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
32
fig.06
ADV8195 TMDS IN
FRONT HDMI BUFFER TMDS OUTPUT
HDMI OUT1
TMDS IN
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
HDMI5 HDMI2.0 VIDEO DECODER HDMI i/p Scaler_TX_OSD
Matix SW ADV7850 AD55-058Z-0
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data
CX870 MODULE
VBUS
DATA- USBD-
USB FRONT DATA+ USBD+
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
33
fig.07
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
34
fig.08a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
35
fig.08b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
36
fig.09a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
37
fig.09b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
38
fig.10a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
39
fig.10b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
40
fig.11a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
41
fig.11b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
42
fig.12
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
43
fig.13
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
44
fig.14a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 SD0/SD1/SD2/SD3_SPDIF)
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAS
DACDATASB
DACDATAC
DAC_64FS
DAC_256FS
MAIN ZONE DAC
O2
PCM1690
ARCSPDIF DIR_FS1
DIRRXSPDIF DIR_64FS1
DIR_256FS1
DM920_SPDIF
45
fig.14b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
OPEN ZONE2 OUT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
46
3.5. Protection History Display Mode
3.5.1. Actions
This mode records and displays an event in which the THERMAL, ASO or DC protection was activated.
If protections have been activated multiple times, the latest protection operation is recorded.
3.5.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
Select the "2. PROTECTION" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit the
selection.
If the power is turned on during this abnormality, protection is activated after around 6 seconds and the power is turned off.
(4) THERMAL (if the last protection was THERMAL(A) or THERMAL(B) or THERMAL(E))
FLD L3 : T H M A
FLD L3 : T H M B
FLD L3 : T H M E
Cause: Abnormal heat sink temperature.
If the power is turned on during this abnormality, protection is activated after around 2 minutes and the power is turned off.
(4) Case of CURRENT (when the last protection incident was CURRENT protection)
FLD L3 : C U R R E N T
Caution: These protections may also be activated due to causes such as disconnection of connectors or operations
around the microcomputer.
After viewing the above protection history, press the button "STATUS" to return to the normal display.
47
3.5.4. Clearing the Protection History
There are two ways to clear the protection history.
(1) Start Protection History Display Mode. Press the button "STATUS" to display the protection history. Press and hold the
button "DIMMER" for 3 seconds.
L1 P R O T E C T
FLD L2 H I S T O R Y
L3 : D C
FLD L3 C L E A R
FLD L3 : N O
b Use the method in 3.5.3.(1) if you do not want to erase your settings from this unit.
48
3.6. Operation Info Mode
3.6.1. Actions
This mode displays the accumulated operating time, power on count and each protection count.
3.6.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
Select the "4. OP INFO" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit the
selection.
3.6.3. Operations
Press the "STATUS" button after starting this device in Operation Info mode.
The following information is displayed in the following order.
"STATUS"
"STATUS"
"STATUS"
49
3.7. TUNER STEP mode
3.3.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3.7.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
Select the "5. TUNER FRQ SER" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit
the selection.
3.7.3. Displays
Start this unit in TUNER STEP mode, select using button "TUNER PRESET CH+/-" and enter using button "STATUS".
The following information is displayed in the following order.
50
4. Protection Pass Mode
4.1. Actions
• This mode allows the power to be turned on without activating protections.
• This is the same as normal power-on, except that protections are not activated.
4.2. Operations
old down buttons "DIMMER", "STATUS" and "SOUND MODE" at the same time and press the power button to turn on
H
the power.
The device returns to the normal display after the following is displayed.
L1 P r o t e c t
FLD L2 P a s s
L3
This is displayed for 5 seconds before returning to the normal display.
5.2. Operations
1. Turn on the button "MAIN ZONE" and set NETWORK as the input source.
2. Hold down buttons "TUNER PRESET CH +" and "STATUS" for at least 3 seconds while the power is on.
3. FL display during CX870 / CY920 reboot
L1 N e t w o r k
FLD L2 R e s t a r t
L3
51
6. CX870 / CY920 Initialization mode
6.1. Actions
The following items are initialized.
(1) Favorites
(2) Quick Select
(3) Presets
(4) Internet Radio Recently Played
(5) Flickr contacts
(6) User ID
(7) Resume Playback station
6.2. Operations
Hold down buttons "TUNER PRESET CH -" and "DIMMER" for at least 3 seconds while the power is on.
Initializing Display
L1 I n i t i a l
FLD L2 W a i t
L3
FLD L2 W a i t .
FLD L2 W a i t . .
FLD L2 W a i t . . .
Complete Display
L1 C o m p l e t e
FLD L2
L3
This is displayed for 5 seconds before returning to the normal display.
Failed Display
L1 F a i l e d
FLD L2
L3
52
JIG FOR SERVICING
The following jigs (extension cable kit) are used when repairing the PCBs.
Order the jigs from your dealer if necessary.
-Procedures-
(1) Remove the screws.
Front side
N1018 N1033
N1014
N1015
N1013
N1016
53
Front side
CN5003
Front side
CN5601
TO CP401
CN5602
(3) Remove the HDMI PCB from the chassis and turn it over.
Place an insulation sheet larger than the PCB underneath the HDMI PCB.
b Connect the earth of the PCB to the chassis using an earth wire, etc.
PCB PREOUT
PCB VIDEO
Insulation sheet
PCB HDMI
CHASSIS-PREOUT CONNECTOR
54
(4) Connect the expansion cables.
5
4
3
PCB HDMI
PCB INPUT
PCB FRONT CNT
7
8
9
10
11
12
55
PROCEDURE AFTER REPLACING THE MICROPROCESSOR, ETC.
The procedure after replacing the u-COM (microprocessor), flash ROM, etc. is as follows.
Proce-
dure after
PCB Name Ref. No. Description Remark
Replace-
ment
HDMI U1018 R5F56108VNFP 32BIT B SOFTWARE: Main
HDMI U1020 R5F5210ABDFP B SOFTWARE: Sub
HDMI U1025 MX25L1606EM2I-12G 16M B SOFTWARE: DSP ROM
HDMI U1027 MX25L12835FMI-10G 128M B SOFTWARE: GUI ROM
HDMI U1041 5M80ZT100C5N TQFP100 B SOFTWARE: AUDIO PLD
HDMI U1045 5M80ZT100C5N TQFP100 B SOFTWARE: VIDEO PLD
Procedure after Replacement
A : The software has been written. The software is not written at the time of replacement.
B :The software has been written. The software may need to be rewritten by version updates. Check the version.
C : The software has not been written. The software needs to be written after replacement.
See "Firmware Update Procedure" for information on writing the software.
D : The software has been written. Be sure to rewrite with the latest software for your service region.
See "Firmware Update Procedure" for information on writing the software.
56
1.3. File structure on USB Memory
Copy the update files to the USB memory with the following structure:
USB memory root
Model Name Model Area Product ID
+ firmwares
+ 000100XXXXXX
+ APLD.bin
+ DSP.bin
+ enc_update.xml
+ GUI.bin
+ IMG.bcd
+ MAIN.bin
+ SBL.bcd
+ SUB.bin
+ VPLD.bin
Download firmware in
USB flash drive.
57
1.5. Start the update.
Hold down buttons "TUNER PRESET CH +" and "STATUS" at the same time and press the power button to turn on the
power.
1.7. Press the "ENTER" key on the remote control unit or this unit.
1.9.2. Operations
Press the "TUNER PRESET CH +" and "STATUS" buttons simultaneously while inserting the AC plug to turn the power
on.
58
1.10.About the error code
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
Details of Error code Display Coping strategies
Code
Firmware File in USB for unsup- NotMatchFirm Check the supported Model name/area
03
ported Model name/area. 03 for the Firmware File.
Unable to detect USB for Firm- ConnectionFail Disconnect and connect the USB
0A
ware Download. 0A memory.
No Firmware File for Firmware FilesNotFound Disconnect and connect the USB
0B
Download. 0B memory.
59
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
Erase fail times. Wait until the FL display stops.
Block Erase failed before rewriting
13 If the FL display stops at the Error dis-
Main. 13 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Block Write failed while rewriting
14 If the FL display stops at the Error dis-
Main. 14 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
UpdateCheckNG times. Wait until the FL display stops.
Error in Verify after rewriting Main
15 If the FL display stops at the Error dis-
(Check Sum Error). 15 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Setup failure of the transfer
16 If the FL display stops at the Error dis-
method of XModem. 16 play, press and hold the "Power opera-
tion" button for five seconds.
Unable to detect USB after SBL ConnectionFail Disconnect and connect the USB
20
Mode. 20 memory.
No Firmware File in USB after SBL FilesNotFound Disconnect and connect the USB
21
Mode. 21 memory.
Firmware File in USB after SBL NotMatchFirm Check the supported Model name/area
22 Mode for unsupported Model
22 for the Firmware File.
name/area.
Failed to obtain entire Firmware ConnectionFail Disconnect and connect the USB
23
information after SBL Mode. 23 memory.
60
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
NotMatchFirm times. Wait until the FL display stops.
Firmware File in USB for unsup-
38 If the FL display stops at the Error dis-
ported Model name/area. 38 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
39 Time Out in USB Check. If the FL display stops at the Error dis-
39 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
Unable to detect USB for Firm-
3A If the FL display stops at the Error dis-
ware Download. 3A play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
FilesNotFound times. Wait until the FL display stops.
No Firmware File for Firmware
3B If the FL display stops at the Error dis-
Download. 3B play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Error notification received while
3C If the FL display stops at the Error dis-
requesting Firmware Info. 3C play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Time Out while obtaining Firm-
3D If the FL display stops at the Error dis-
ware information. 3D play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
3F Failed to transit to SBL Mode. If the FL display stops at the Error dis-
3F play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
50 Unable to detect USB. If the FL display stops at the Error dis-
50 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
FilesNotFound times. Wait until the FL display stops.
51 No Firmware File in USB. If the FL display stops at the Error dis-
51 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
NotMatchFirm times. Wait until the FL display stops.
Firmware File in USB for unsup-
52 If the FL display stops at the Error dis-
ported Model name/area. 52 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Error notification received while
54 If the FL display stops at the Error dis-
requesting Firmware Info. 54 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Time Out while obtaining Firm-
55 If the FL display stops at the Error dis-
ware information. 55 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
Unable to detect USB for Firm-
56 If the FL display stops at the Error dis-
ware Download. 56 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
FilesNotFound times. Wait until the FL display stops.
No Firmware File for Firmware
57 If the FL display stops at the Error dis-
Download. 57 play, press and hold the "Power opera-
tion" button for five seconds.
61
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
Invalid DeviceID in response or no ConnectionFail times. Wait until the FL display stops.
5A response from Sub for C com- If the FL display stops at the Error dis-
mand. 5A play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
NACK received in response or no Updating fail times. Wait until the FL display stops.
5B response from Sub for L com- If the FL display stops at the Error dis-
mand. 5B play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
No Update Packet received from
5C If the FL display stops at the Error dis-
CX870 (Time Out). 5C play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Abnormal data in Update Packet
5D If the FL display stops at the Error dis-
received from CX870 (CRCError). 5D play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Abnormal data in Update Packet Updating fail times. Wait until the FL display stops.
5E received from CX870 (PacketNo- If the FL display stops at the Error dis-
Error). 5E play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Setup failure of the transfer
5F If the FL display stops at the Error dis-
method of XModem. 5F play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
NACK received in response or no Updating fail times. Wait until the FL display stops.
60 response from Sub for P com- If the FL display stops at the Error dis-
mand. 60 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Mismatched Check Sum in re- UpdateCheckNG times. Wait until the FL display stops.
61 sponse or no response from Sub If the FL display stops at the Error dis-
for I command. 61 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Failed to start up Sub in Power On
62 If the FL display stops at the Error dis-
sequence during Update. 62 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Failed to transit to Application
63 If the FL display stops at the Error dis-
Mode. 63 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Failed to transit to Boot Loader
64 If the FL display stops at the Error dis-
Mode. 64 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Write Enable Latch Bit not set in Updating fail times. Wait until the FL display stops.
80 Read after issuing WREN com- If the FL display stops at the Error dis-
mand. 80 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Block Erase failed in Read after
81 If the FL display stops at the Error dis-
issuing BE command. 81 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
No Update Packet received from
82 If the FL display stops at the Error dis-
CX870 (Time Out). 82 play, press and hold the "Power opera-
tion" button for five seconds.
62
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Abnormal data in Update Packet
83 If the FL display stops at the Error dis-
received from CX870 (CRCError). 83 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Abnormal data in Update Packet Updating fail times. Wait until the FL display stops.
84 received from CX870 (PacketNo- If the FL display stops at the Error dis-
Error). 84 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Abnormal data in Update Packet Updating fail times. Wait until the FL display stops.
85 received from CX870 (Data- If the FL display stops at the Error dis-
Length/DataNo). 85 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Mismatched Check Sum in Check
86 If the FL display stops at the Error dis-
Sum comparison after rewriting. 86 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
A2 Unable to detect USB. If the FL display stops at the Error dis-
A2 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
FilesNotFound times. Wait until the FL display stops.
A3 No Firmware File in USB. If the FL display stops at the Error dis-
A3 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
NotMatchFirm times. Wait until the FL display stops.
Firmware File in USB for unsup-
A4 If the FL display stops at the Error dis-
ported Model name/area. A3 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Error notification received while
A6 If the FL display stops at the Error dis-
requesting Firmware Info. A6 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Time Out while obtaining Firm-
A7 If the FL display stops at the Error dis-
ware information. A7 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
ConnectionFail times. Wait until the FL display stops.
Unable to detect USB for Firm-
AE If the FL display stops at the Error dis-
ware Download. AE play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
FilesNotFound times. Wait until the FL display stops.
No Firmware File for Firmware
AF If the FL display stops at the Error dis-
Download. AF play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Download fail times. Wait until the FL display stops.
Time Out in Download (writing to
B1 If the FL display stops at the Error dis-
SDRAM) for Firmware Download. B1 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Error notification received after
B2 If the FL display stops at the Error dis-
rewriting CX870 Firm. B2 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Error in Firmware Update (Time
B3 If the FL display stops at the Error dis-
Out). B3 play, press and hold the "Power opera-
tion" button for five seconds.
63
Error
Details of Error code Display Coping strategies
Code
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Failed to transit to BootLoader
B4 If the FL display stops at the Error dis-
Mode. B4 play, press and hold the "Power opera-
tion" button for five seconds.
This unit automatically retries several
Updating fail times. Wait until the FL display stops.
Failed to transit to Application
B5 If the FL display stops at the Error dis-
Mode. B5 play, press and hold the "Power opera-
tion" button for five seconds.
---Check the firmware version after updating.---
After updating the firmware, check the version. See "1. Version Display Mode" (20 page ).
08 - 0B
L1 Main 10 - 15
Main CPU FLD L2 ***min 20 - 27
36 - 3B
L3 **% 3F
50 - 52
Sub FLD L1 SUB 54 - 58
5A - 64
50 - 52
Audio PLD FLD L1 APLD 54 - 58
5A - 64
50 - 52
VIDEO PLD FLD L1 VPLD 54 - 58
5A - 64
50 - 52
DSP FLD L1 DSP 54 - 58
5A - 64
50 - 52
54 - 58
GUI Serial Flash FLD L1 GUI 5A
62 - 64
80 - 86
A0 - A4
CX870 Boot Loader FLD L1 ESBL A6 - A7
AE - B5
A0 - A4
CX870 Image FLD L1 EIMG A6 - A7
AE - B5
L1 Update
CX870 Image (Emergency Mode) FLD L2 Retry –
L3
64
2. Updating by DPMS
Download the latest firmware from the internet and update the firmware.
2.1. Network Connection
(1) System Requirements
• A broadband internet connection
• Modem
• Router
• Ethernet cable (CAT-5 or greater recommended)
(2) Settings
Internet
Computer
Modem
ComputerLAN port / Ethernet connector
To WAN port
Router
To LAN port
To LAN port
ETHERNET connector
65
2.3. About the error code
See the following table for details on the error code, details of the error code, display and coping strategies when updating
the firmware from DPMS. (DPMS:Marantz Product Management Server).
Error
Details of Error code Display Coping strategies
Code
Initialize the unit and try updating
Login failed again.
01 Failed to log in to DPMS.
01 Update in an environment where there
is a small network load.
Line etc. is congested when log- Server is busy Update in an environment where there
02
ging in to DPMS. 02 is a small network load.
Error(NG) notification received Download fail Check the network connection. Update
0A while requesting Firmware Down- in an environment where there is a
load. 0A small network load.
Error(ServerBusy) notification re- Download fail Check the network connection. Update
0B ceived while requesting Firmware in an environment where there is a
Download. 0B small network load.
Error(Connect failure) notification Download fail Check the network connection. Update
0C received while requesting Firm- in an environment where there is a
ware Download. 0C small network load.
No Update Packet received from Updating fail Turn on the power again. Update will
10
CX870 (Time Out). 10 start automatically.
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
11
received from CX870 (CRCError). 11 start automatically.
66
Error
Details of Error code Display Coping strategies
Code
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
12 received from CX870 (PacketNo-
12 start automatically.
Error).
Block Erase failed before rewriting Erase fail Turn on the power again. Update will
13
Main. 13 start automatically.
Block Write failed while rewriting Updating fail Turn on the power again. Update will
14
Main. 14 start automatically.
Error in Verify after rewriting Main UpdateCheckNG Turn on the power again. Update will
15
(Check SumError). 15 start automatically.
Server congestion notification SBL Server is busy Update in an environment where there
23
Mode after DPMS connection. 23 is a small network load.
Failed to write to EEPROM after Download fail Initialize the unit and try updating
27
SBL Mode. 27 again.
Login incorrect notification DPMS Login failed Update in an environment where there
36
connection. 36 is a small network load.
67
Error
Details of Error code Display Coping strategies
Code
Login incorrect notification DPMS Login failed Update in an environment where there
50
connection. 50 is a small network load.
Invalid DeviceID in response or no ConnectionFail Turn on the power again. Update will
5A response from Sub for C com-
5A start automatically.
mand.
68
Error
Details of Error code Display Coping strategies
Code
NACK received in response or no Updating fail Turn on the power again. Update will
5B response from Sub for L com-
5B start automatically.
mand.
No Update Packet received from Updating fail Turn on the power again. Update will
5C
CX870 (Time Out). 5C start automatically.
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
5D
received from CX870 (CRCError). 5D start automatically.
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
5E received from CX870 (PacketNo-
5E start automatically.
Error).
Setup failure of the transfer Updating fail Turn on the power again. Update will
5F
method of XModem. 5F start automatically.
NACK received in response or no Updating fail Turn on the power again. Update will
60 response from Sub for "P" com-
60 start automatically.
mand.
Mismatched Check Sum in re- UpdateCheckNG Turn on the power again. Update will
61 sponse or no response from Sub
61 start automatically.
for "I" command.
Failed to start up Sub in Power On Updating fail Turn on the power again. Update will
62
sequence during Update. 62 start automatically.
Write Enable Latch Bit not set in Updating fail Turn on the power again. Update will
80 Read after issuing WREN com-
80 start automatically.
mand.
Block Erase failed in Read after Updating fail Turn on the power again. Update will
81
issuing BE command. 81 start automatically.
No Update Packet received from Updating fail Turn on the power again. Update will
82
CX870 (Time Out). 82 start automatically.
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
83
received from CX870 (CRCError). 83 start automatically.
Abnormal data in Update Packet Updating fail Turn on the power again. Update will
84 received from CX870 (PacketNo-
84 start automatically.
Error).
Setup failure of the transfer Updating fail Turn on the power again. Update will
85
method of XModem. 85 start automatically.
Mismatched Check Sum in Check Updating fail Turn on the power again. Update will
86
Sum comparison after rewriting. 86 start automatically.
69
Error
Details of Error code Display Coping strategies
Code
Failed to transit to Boot Loader Updating fail Initialize the unit and try updating
B4
Mode. B4 again.
Failed to transit to Application Updating fail Initialize the unit and try updating
B5
Mode. B5 again.
70
Device display during firmware update
Display of target device during firmware update.
L1 Main 08 - 0C
10 - 15
Main CPU FLD L2 ***min 22 - 24
L3 **% 36 - 3E
50 - 52
Sub FLD L1 SUB 54 - 58
5A - 64
50 - 52
Audio PLD FLD L1 APLD 54 - 58
5A - 61
50 - 52
VIDEO PLD FLD L1 VPLD 54 - 58
5A - 64
50 - 52
DSP FLD L1 DSP 54 - 58
5A - 61
50 - 52
54 - 58
GUI Serial Flash FLD L1 GUI 5A - 61
80 - 86
A0 - A4
CX870 Boot Loader FLD L1 ESBL A6 - A7
AE - B5
A0 - A4
CX870 Image FLD L1 EIMG A6 - A7
AE - B5
L1 Update
CX870 Image (Emergency
FLD L2 Retry –
Mode)
L3
71
ADJUSTMENT
Adjusting Idling Current
1. Preparation
(1) Prepare a DV voltmeter.
(2) Place the unit in normal usage conditions, away from highly ventilated areas such as next to an air conditioning
machine or electric fan.
The set requires an ambient temperature of 15℃ to 30℃ and standard humidity.
(3) Settings of This Unit
• POWER (Power source switch) STANDBY
• SPEAKER (Speaker terminal) No load
( Do not connect equipment such as speakers or dummy resistors. )
2. Adjustment Procedure
(1) Remove the top cover and turn VR401, VR402, VR403, VR404, VR405, VR406 and VR407 of the AMP UNIT as far
anticlockwise(c) as possible.
(2) Connect the DC Voltmeter test points.
FRONT-Lch :TP401
FRONT-Rch :TP402
CENTER ch :TP403
SURROUND-Lch :TP404
SURROUND-Rch :TP405
SURROUND-BACK Lch :TP406
SURROUND-BACK Rch :TP407
(3) Connect the power cord to an outlet. Next, press the power button to turn on the power.
(4) Set this unit as follows.
MASTER VOLUME :"---" anticlockwise (c min.)
SPEAKER (Speaker terminal) :No load
( Do not connect equipment such as speakers or dummy resistors. )
MODE :MCH STEREO
FUNCTION :DVD
(5) Turn VR401 clockwise (x) and adjust the voltage of the test point to "6.0mV ± 0.5mV DC" within 2 minutes.
(6) 10 minutes after the preliminary adjustment, turn VR401 and set the voltage as "8.0mV ± 0.5mV DC".
(7) Adjust the variable resistance of each channel using the same method.
AMP UNIT
DC Voltmeter
VR404
TP401 TP403
VR401 VR403 VR402
VR405 VR406 VR407
TP404 TP405
TP402 TP406
C ch TP407
F Lch
S Lch S Rch
F Rch S Back Lch
S Back Rch
72
SURROUND
Contents MODES AND PARAMETERS
Connections Playback Settings Tips Appendix
Contents
Multi Ch Stereo
Connections S
Playback
D D
Settings D
Tips D
AppendixD
Virtual S D
z1 A signal for each channel contained in an input signal is output as audio.
Sound modes and surround parameters
z2 Audio is output when the set sound mode name contains “+PLgz”.
z3 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 194)
74
Front panel Display Rear panel 249 Remote Index
TROUBLE SHOOTING
1. POWER
1.1. The unit does not power on
YES
Has a fuse broken? See "1.2.Fuse is blown."
NO
YES YES
NO YES
0.6V or -0.6V
75
2. Analog video
COMPONENT/HDMI OUT NG
To A TO "3 HDMI/DVI"
17
N1019
N1018
N1033
C2174
CLAMP1001
R2074
C2181
C2179
C2178
R1374
R1356
Pb
C2123 C1295 R1369 C1292 U1045
Q1023
R1361
R1355
C1290
R1360
R1354
R1350
R1357
R2078 5M80ZT100C5N
R2066 C2128
O
N1032
R1351
R2068
C2175
C2177
DSP1OUT64FS
DSP1IN F_FL
I
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
N1014 R1672
OP ADJ FI
R1567
R1574
R1563
R1564
DSP1INFS
C1431
IN
C1402
C1417
C1419
R2067 ICT
C1406
C1408
C1414
R2002 R1681
R1929
C1911
F/HDMI
C1286 C1922 R1974
R1339
C2137 C1443
R1338 R1337
C2096
C2172
R1971
R1930
R1942
R1941
VSYNC
R1349
R1347
N1028
R1972
C1672
R1716
R1715
C1619
C2146 C2113 Q1030 R1575 R1581 R1973 HSYNC
C1665
R1933
C1968
C2149 C2136 C2058 C2059 Q1018
R2021 C2129 C1436
R1981
R1982
C1646 C1670
R1639
R1635
R1685
R1686
C2151 C2134 R1928 C1438
C1645
K4T51163QJ L1053
R1576
H
G
D
C
B
E
F
A
C2121 R1763 R1562 R1824 R1704 R1641
23
1 2 3
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
R1767 C1459 HSYNC C1617
R2038 C2164 C1437 R1720
U1029
AVSCL
R1702 R1701
C2062 R1566 R1568 DE
C2165 R1922 R1593 C1463 R1820 R1722 R1699 R1683
N1035
R2044 SPI_MO
C1448 C1466 R1732
AC
AB
AA
W
M
U
H
R
P
D
C
B
E
Y
V
A
C2162 R2047 R1724
L
T
J
SPI_CS
7 8 9
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
R1906 Q1072 R1728 4
C2171 R1669
C2070 X1008 24.576MHZ
R1703 5
C2082
7
R1667
C2064 C2063
R2072
R1905 R1904
8
R1822
R1823
C2072 11
R1707
R1914
R1915
R2085
R1916
C1479 ADV8003_IN0
C2185 Q1067
C1611 C1612
X1006 27MHZ
C2073 ADV8003_RST
U1028 K4T51163QJ
U1041 R1596
R1731
R1588 R1706
N1034
R1662
L1029 R1912 5M80ZT100C5N R1590 17
TX_TEST1
R1625
H
R
P
D
C
B
E
F
A
L
J
R1697
R1797
R1795 20
R1913 C1470 R1621 R1622 R1623 R1624
D1124
21 D
N1017
1 2 3
R1719 22
R1698 C
D1073
C1945
C1944
U1024 R1721 23
L1040 R1178 R1184
2 40 ADSP21487 R1619 R1626 C1567 D1074 R1183
R1878
C1969 C1921
C1509 C1510 R1723 C1568 U1026 L1051
ADV8003 R1187 R1180 D1076
R1258 X1005 R1725 R1188 R1179 D1075
7 8 9
L1047
15
R1076
C1569
R1727
L1044
L1045
R1695
R1254 21.875MHZ
CY 920 MODULE
C1574
1 39
R1874 R1876
L1046
R1479
D1126 D1125
R1070 R1075 R1729 L1043 E
R1482
R1481
C1751
Q1068 C1327
R1484
R1997
R1363
R1522
R1696
R1365
D1026 R1069
R1787
R1814
R1815
C1775
R1147 R1150
R1746
R1750
C1713
R1998 R1717
N1029
C1350
C1351
C1153 D1061
R1504
R1505
R1506
R1831
R1152 R1149 D1064
R1827
C1789
R1830
R1799
R1793
R1810
C1749
R1816 R1043 R1153 R1148 D1063
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1039 R1042
R1638
R1637
D1089
C1357
R1519
R1521
R1520
R1518
R1517
U1033
R1545
R1544
DV1.8V
C1352
D1013 R1038
L1027
3.3V
Q1069
C1727
C1951
C1954
R1477
C1353
C1681
R1364
R1345
R1362
R1344
C1840
C1941
R1741
C1923
R1378 R1377 R1516
C1354
R1512
L1055
2 1 R1755
2
R1480
1
C1709 R1751
R1782
R1754
R1478
Q1059
C1693
Q1052
R1743
R1748
U1008
C1710
N1013 R1507
R1483
C2336
R1381 C1845 R1464 R1508 C1032 D1000 Q1056 Q1055 N1036
I O D1001 R1013
R1783
U1030 N1025 Q1062
C1752
A
REQSOMI R1463 R1449
R2165
7
R2176
R2177
R2178
R2179
R2180
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
R1396
R1398
R1399
R1126
R1867
R1865
R1864
R1861
R1858
R1855
R1271
R1216
R1217
ACKSIMO
CLKSIMO
R1031
C2214
SIMO
SOMI
R1145
R1415 R1233 F C1115 D1049
R1833 D1050 R1121
D1002 R1015 R1021
D1003 R1016 R1019
R1898
C1774
C1302
R1120
C1943
U
R1237 R1850
R1734 R1733
R2134 G C1090 D1037 R1881
T
C1305 C2321 R1160 Q1051 Q1050 C1703
X1003 12MHZ
C1758
C1772
C2323 R1852
R2122
R1883
R1437
C1336 C1337
1.1V
R1242 C2322 R1108 R1103 D1039 R1166 C1770 R1894
C1303 R1221 R1159
C2055 C2052
L1122 C1858 R1897 R1893
R1209
L1065
L1064
R1222 R1834 C1179 X1009 R1162
C1685
C1301 R2137
D1096
R1498
J
R1984
R1987
R1986
R1985
R1224
L1116
L1119
L1118
L1117
R1390 R1210 R1244 27MHZ G
R1223 R1500 R1486 R1993 F U1055 C1182
R1063
C1755
R1788
C1173 R1225 R2133
E
ADV7850
27MHZ
R1784
R1247 R1785
HAINT1
C1160
C1697
1.1V
C1161
R1389
R1245 C1738
R1835 R1775
R1759
X1007
C1174 C1078
R1753
D1114 D1118
D
R1226 D1115 D1119
R1388
R1171
C
C1309 C2103
23
NET2.5V
NET1.9V
R2136 B
R1994 D1112 D1116
C1300
D1009 D1011
D1005 D1007
A
U1018
D1008 D1010
D1113 D1117
27MHZ
D1004 D1006
L1123 L1112
L1113
C1311 A
X1000
27MHZ
CH0AMCLK
X1001
C1086
R5F56108VNFP
U1063
R1798 R1809
R1068 R1060
R1066 R1061
R1067 R1062
R1080
C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1785
R1265 HPD_P2
C1702
L1121
R1255
R1989
R1990
L1120
R1991
R1988
R1384 R1267 C1077 R1854
R1428
R1467
HSCL
R1431
C1339
C1325
C1344 R1206
R1805
D1106
R1747
R1095 C1689 U1061 C1696 D1130 D1133 D1134
C1686
C1838
D1043 D1041
D1047 D1045
C2105 64
C1841
R1168
D1021 D1023
L1062
D1017 D1019
63
D1020 D1022
D1016 D1018
C1746
C2044
R1887
L1057
D1053 D1055
D1057 D1059
D1024
U1019
R1272
R1872
R1262 R1776
C1181
C1184
D1029
D1033
R1983
R1958 D1136 C1186 J Q1003
Z1001 R1949 R1736 R1856 R1859 R1862
R1891
R1249
R1888
D1091 R1959 Q1009 D1107 D1108 D1109
D1036
D1032
Q1016 IN7_DET
D1031
D1035
R1096
R1097
R1455
IN2_DET
R1873
C1907 D1067 D1068 D1071 D1072 R1857 R1860 R1863
D1121
Q1010
R1456 C1916
D1111 D1110 D1120
R1435 D1090 R1443
R1448
C1185
Q1015
R1099
D1094
1.HPD
K1003 K1002 R1969 IN2 IN3 IN4 IN5 IN6 C
R1968 IN1_DET N1001 DDCSDA N1002 DDCSDAQ1005 IN3_DET N1003 DDCSDA IN4_DET N1004 DDCSDA Q1012 Q1011 N1005 DDCSDA IN6_DET N1006 IN7 N1007 DDCDATA N1031 N1030
U1043 U1044 IN2+5V
DDCCLK
IN3+5V IN4+5V IN5+5V DDCSDA
I IN6+5V
G F
IN1
+5V
2.DDCDATA
IN7+5V
2.DDCCLK
D1093
K1000
K1001
DDCSDA
2.HPD
IN5_DET
C1338
C1340
IN4
IN1 IN2 IN3 H DDCSCK
IN5 IN6 E D IN7
DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK
Detail A Detail B
MAC ADDRESS LABEL
6pin
N1018
17
CLAMP1000
R2089
C2104 4pin
R2091 2pin
R2129
DSP1IN F_FL
3pin
DSP1IN64FS
R2090
DSP1INFS
C1402
C1431
R2094C2189
C1433
5pin
C2320
R1583
R2092
R2096C2188 R1585
R2095C2187
R2093C2206
JACK5002
BKT5003
RC-5 DVD-Cr OUT_Cr DVD-Cb OUT_Cb DVD-Y OUT_Y SAT-Cr C-OUT SAT-Cb C-DVD SAT-Y C-SAT PRE_SW2 PRE_SW1 Z2_L Z2_R
J5054
C5022
BAR CODE
J5053
J5032
J5035
J5033
J5041
Pb
J5043
J5052
J5037
C5011 PRE_SW1
J5051 AGND
J5028 J5014 J5070 C4220 D5V(MX)
KILLIR
RC_OUT
FRONT_IRIN
J5026 J5029
J5050
RC_IN
VOL_MUTE
J5072 M3.3V
J5047
J5044
J5048
J5049
J5042
MUTE_3.3V
A_-7V
A_-7V
J5040 J5006
J5069
C5662
ZD4200
ZJ3.6B
J5016 J5007
C4247
J5017 J5008
J5055
D4211
D4210
R5710
R5711
J5018 J5009
J5046
J5011 J5002
J5010
R4298
R4297
R4301
J5012
J5056
J5003
J5023
C5029
COMPONENT SW2
C5028
C5029 +side
COMPONENT SW1
C5031 -side
AMP_MUTE
MUTE_+7V
D/MGMD
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D4212
VDICR
VDICB
VDIPY
V.AUX
V_INC
V_INB
V_INA
VGND
VGND
CVBS
V+5V
V+5V
C5031
V-5V
V-5V
NC
NC
NC
11P 13P 7P
76
A Input
CVBS / COMPONENT
q
Check the input signal to the
VIDEO DECODER.
Can a signal be confirmed at
the following points?
HDMI PCB NO NO
V : R2092 Check the connection between Input CVBS:Check B
COMPONENT-Y : R2089 the PCBs. Input COPONENT:Check C
COMPONENT-Cb : R2091
COMPONENT-Cr : R2090
YES
77
B Input
CVBS
q
Check the set value of each
IC. Are the voltage values as
follows?
HDMI PCB NO
N1018 - 3pin : Hi(3.3V) The HDMI PCB is faulty.
N1018 - 4pin : Hi(3.3V)
N1018 - 5pin : Lo(0V)
YES
w
Use the jigs to extend the
HDMI PCB.
e
Is the power supply voltage
being output correctly? NO Check the connection between the
V+5V : C5029 : + side FRONT CONNECTOR PCB and the
V-5V : C5031 : - side VIDEO PCB.
YES
r
Is a signal being output from NO •Check the IC5001 power supply
the video amplifier? voltage and check the soldering of
CVBS : J5039 the surrounding circuits.
•The circuit between IC5001 and
JACK5000 are faulty.
YES
78
C Input
COMPONENT
YES
w
Use the jigs to extend the
HDMI PCB.
e
Is the power supply voltage
being output correctly? NO Check the connection between the
V+5V : C5029 : + side FRONT CONNECTOR PCB and the
V-5V : C5031 : - side VIDEO PCB.
YES
r
Is a signal being output from
•Check the IC5001 power supply voltage and check the soldering of the surround-
the video amplifier? NO ing circuits.
COMP-Y : J5032
•The circuit between IC5002 and JACK5000 are faulty.
COMP-CB : J5033
•Check the cable between the unit and the player, and check the player itself.
COMP-CR : J5000
YES
79
3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
NO
(1) Is the HDMI/DVI cable correctly inserted? Check the connection of the HDMI/DVI cable.
YES
YES
(2) Is an HDMI/DVI selector, repeater or image quality improvement Remove all of these and connect only the HDMI/DVI
device being used? cable.
NO
NO
(3) Is a certified HDMI cable (with the HDMI mark) being used? Use a certified HDMI cable (with the HDMI mark).
YES
YES
(5) W
hen the input signal is Deep Color or 4K, are you use a "High NO Use an "High speed HDMI cable with Ethernet" or
speed HDMI cable with Ethernet" or "High speed cable" that
"High speed cable" that comes with the HDMI logo.
bears the HDMI logo?
YES
YES
(6) Are a picture and sound output when a different HDMI/DVI cable is
The HDMI/DVI cable is faulty.
used?
NO
NO
Check the instruction manual of the Blu-ray/DVD player
(7) Are the HDMI output settings of the Blu-ray/DVD player correct?
and set the HDMI output correctly.
YES
YES
(9) Are a picture and sound output YES Set the output resolution of the Blu-ray/DVD player to a
NO when the resolution of the Blu-
resolution supported by the TV.
ray/DVD player is changed?
NO
YES
(10) Is sound output from the speaker terminal of this unit when the The Blu-ray/DVD player may not support the HDCP
power of the TV is turned off or the cable connecting the TV to this repeater function.
unit is removed? Check with the manufacturer of the Blu-ray/DVD player.
NO
80
(11) Are a picture and sound output when a different Blu-ray/DVD YES
The Blu-ray/DVD player is faulty.
player is used?
NO
YES
NO
If the TV does not support 1080P, a picture cannot be
(13) Does the TV support 1080P/4K?
output even if the Blu-ray/DVD player is set to 1080P/4K.
YES
NO
Check the instruction manual of the TV and check the
(14) Is HDMI input set on the TV?
input setting.
YES
NO
(15) Are a picture and sound output when a different TV is used? The TV is faulty.
YES
Check the firmware. YES •Check the circuits around the IP SCALER (U1026,
Is "IP SCALER NG" displayed? HDMI PCB) and DDR2 (U1028/1029).
(See 21 page) If there appear to be no problems, U1026 or U1028/1029
NO is faulty.
81
4. AUDIO
4.1. AUDIO CHECK
No audio output
YES
YES
YES
YES
NO
Check for other causes
YES NO
82
4.2. Power AMP (AMP PCB)
No audio output.
Protection is activated.
YES
NO
NO
NO
NO
YES
Are any other transistors faulty? Replace the transistor.
NO
YES
Are any other resistors faulty? Replace the resistor.
NO
Turn on the power and check that the voltage of each part is correct and that there is an idling cur-
rent.
83
4.3. Analog audio
No audio output.
YES
NO
NO
Connect the connectors correctly.
84
5. Network/Bluetooth/USB
5.1. Cannot connect to the network
NO
Insert the LAN cable correctly and then turn
Is the LAN cable correctly inserted?
on the power again.
YES
YES
Are peripheral devices such as the router and hub connected cor- NO
Connect the peripheral devices correctly.
rectly?
YES
85
NO
Can a voltage (5V) be confirmed between pin 2 and pin 5 of The circuit between the AC inlet and N1029
N1029? is faulty. Check the SMPS PCB.
YES
NO NO
Can an output voltage (3.3V) to Is D5V_POWER (U1018 uCOM 85pin) The circuit of D5V_POWER between
U1070(DC-DC Conv.) be confirmed? "Hi" ? U1018 and U1070 are faulty.
YES
YES
The circuit around U1070(DC-DC.
Conv.) is faulty.
NO NO
Can an output voltage (3.3V) to Is E_POWER1 (U1018 uCOM 53pin) The circuit of E_POWER1 between
Q1071(FET_SW) be confirmed? "Hi" ? U1018 and Q1071 are faulty.
YES
YES
The circuit around Q1071(FET_SW) is
faulty.
NO NO
Can an output voltage (1.2V) to U1067 Is E_POWER4 (U1018 uCOM 53pin) The circuit of E_POWER4 between
be confirmed? "Hi" ? U1018 and Q1071 are faulty.
YES
YES
The circuit around U1067(DC-DC.
Conv.) is faulty.
NO NO
Can an output voltage (1.9V) to U1069 Is E_POWER2 (U1018 uCOM 54pin) The circuit of E_POWER2 between
be confirmed? "Hi" ? U1018 and U1069 are faulty.
YES
YES
The circuit around U1069(DC-DC.
Conv.) is faulty.
NO
Are the versions of the Ethernet SBL and IMG displayed in Version
The Ethernet software is faulty.
Check Mode?
YES
86
5.2. Cannot connect to the Bluetooth
Can a voltage (5V) be confirmed between pin 1 and pin 4 of N1036 on NO The circuit between the AC inlet and N1036 is faulty.
HDMI PCB? Check the SMPS PCB.
YES
YES
Can a voltage (3.3V) be confirmed pin 6 of CP6001 on Bluetooth NO The circuit around Q1071 or U1070 of the HDMI
PCB? PCB is faulty.
YES
NO
Can a voltage (3.6V) be confirmed pin 1 of U6001 on Bluetooth PCB? The circuit around U6001 is faulty.
YES
YES
YES
87
5.3. A connected USB device is not recognized.
YES
Is a USB hub being used? Do not use a USB hub.
NO
Are CN4402 of the 870JUNCTION PCB and N7000 of the USB PCB NO
Connect the connectors correctly.
correctly connected?
YES
Can a voltage (5V) be confirmed between pin 1 and pin 4 of JK4400 NO The circuit around U7000 of the 870JUNC-
(USB Connector) on USB PCB? TION PCB is faulty.
YES
The USB signal circuit between CX870 and JK4400 of the USB PCB
are faulty.
YES
Are I2S signal output to pin 26, 28, 30, 34 of the U1008 HDMI PCB ? NO The circuit around CX870 or CX870JUNCTION PCB
(The 30, 32, 34pin in the case of DSD) is faulty.
YES
NO
Are audio signal output to pin 8 of U1041(A.PLD) on HDMI PCB. The circuit around U1041(A.PLD) is faulty.
YES
88
HDMI test point
11 HDMI PCB 7020-07508-020-0S [MP]
CLAMP1000
17
N1019
N1018
N1033
C2174
CLAMP1001
R2074
C2181
C2179
C2178
R1374
R1356
U1050 C1293 R1371 R1943 R1945
Pb
C2123 C1295 R1369 C1292 U1045
Q1023
R1361
R1355
C1290
R1360
R1354
R1350
R1357
C2125 R1376 C1288 R1373 R1944
C2160 C2161
R2078 5M80ZT100C5N
R2066 C2128
O
N1032
R1351
R2068
C2175
C2177
DSP1OUT64FS
DSP1IN F_FL
I
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
N1014 R1672
OP ADJ FI
R1567
R1574
R1563
R1564
DSP1INFS
C1431
IN
C1402
C1417
C1419
R2067 ICT
C1406
C1408
C1414
N1000 DE R1673 R1674
R1340
D1138 C1433 C1908 R1001
U1052 PCK R1676
R1999 C2168 C2176 Q1028 Q1022 Q1020 R1583
U1045
R1343
Q1025 R1975 R1682 R1677
R1346 R1585
R1937
R1936
R1935
R2002 R1681
R1929
C1911
F/HDMI
C1286 C1922 R1974
R1339
C2137 C1443
R1338 R1337
C1920 C1913 R1970
R1940
R1939
R2010 C1949 R1934 C1449 DA1.1V
R2061
C2096
C2172
R1971
R1930
R1942
R1941
VSYNC
R1349
R1347
R2013 C2115 R1573
N1028
R1972
C1672
R1716
R1715
C1619
C2146 C2113 Q1030 R1575 R1581 R1973 HSYNC
C1665
R1933
R2017 C2111 N1027 R1577
C1968
C2149 C2136 C2058 C2059 Q1018
R2021 C2129 C1436
R1981
R1982
C1646 C1670
R1639
R1635
R1685
R1686
C2151 C2134 R1928 C1438
C1645
K4T51163QJ L1053
R1576
C2119 R1901 R1927 C1447
H
G
D
C
B
E
F
A
C2121 R1763 R1562 R1824 R1704 R1641
23
R1926 PCK R1690
R1924 R1591 R1766 C1456 R1821 VSYNC
1 2 3
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
C1437 R1767 C1459 HSYNC C1617
R2038 C2164 R1720
U1029
AVSCL
U1024
R1702 R1701
C2062 R1566 R1568 DE
C2165 R1922 R1593 C1463 R1820 R1722 R1699 R1683
N1035
R2044 SPI_MO
U1041 C1466 R1732
C1448
AC
AB
AA
W
M
U
H
R
P
D
C
B
E
C2162 R2047
Y
V
A
R1724
L
T
J
SPI_CS
7 8 9
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
R1906 Q1072 R1728 4
C2171 R1669
C2082
R2069 R1908 R1599 R1713 6 R1668
BKT1001
C1915
C1906
C1904
7
R1667
C2064 C2063
R2072
R1905 R1904
8
R1822
R1823
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
PCM9211 C1773 C1430
U1018
R2082 ADV8003_IN1
C1784
C2072 11
R1707
R1914
R1915
R2085
R1916
C1479 ADV8003_IN0
C2185 Q1067
C1611 C1612
X1006 27MHZ
C2073 ADV8003_RST
U1028 K4T51163QJ
U1041 R1596
R1731
R1588 R1706
N1034
R1662
L1029 R1912 5M80ZT100C5N R1590 17
TX_TEST1
R1625
C1315 C1318 R1909 Q1049 Q1048
C1655
N1015 C1948 R1620 Q1073 18
19
R1911 C1467
M
N
H
R
P
D
C
B
E
F
A
L
J
R1697
R1797
R1795 20
R1913 C1470 R1621 R1622 R1623 R1624
D1124
D
N1026
21
N1017
1 2 3
R1719 22
R1698 C
D1073
C1945
C1944
U1024 R1721 23
L1040 R1178 R1184
2 40 ADSP21487 R1619 R1626 C1567 D1074 R1183
R1878
C1969 C1921
C1509 C1510 R1723 C1568 U1026 L1051
ADV8003 R1187 R1180 D1076
R1258 X1005 R1725 R1188 R1179 D1075
7 8 9
L1047
15
R1076
C1569
R1727
L1044
L1045
R1695
R1254 21.875MHZ
CY 920 MODULE
C1574
1 39
R1874 R1876
L1046
R1479
D1126 D1125
R1070 R1075 R1729 L1043 E
R1482
R1481
H C1087 D1025 C1543 R1151
C1751
Q1068 C1327
R1484
R1997
R1363
R1522
R1696
R1365
D1026 R1069
R1787
R1814
R1815
C1775
R1147 R1150
R1746
R1750
R1081 R1072 D1028 C1551
L1136
C1713
R1998 R1717
N1029
C1350
C1351
C1153 D1061
R1504
R1505
R1506
R1082 R1071 D1027 L1050
R1742
C1708
D1104
C1918 D1062 R1146
C1328
R1831
R1152 R1149 D1064
R1827
C1789
R1830
R1799
R1793
R1810
C1749
R1816 R1043 R1153 R1148 D1063
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1039 R1042
R1638
R1637
D1089
C1357
R1519
U1008
R1521
R1520
R1518
R1517
U1033
R1545
R1544
R1817 R1513 R1514 R1515 I C1070 D1012 CLAMP1002 C1546 C1680
N1036
L1030
L1028
DV1.8V
C1352
D1013 R1038
L1027
3.3V
Q1069
C1727
C1951
C1954
R1477
C1353
C1297 C1296 R1044 R1041 D1015
C1681
R1364
R1345
R1362
R1344
C1840
C1941
R1741
R1510 R1045 R1040 D1014 R1826 C1942
C1923
R1378 R1377 R1516
C1354
R1512
C1346 C1940 C1675
Q1027 Q1026 U1007 Q1043
L1055
2 1 R1755
2
R1480
1
C1709 R1751
R1782
R1754
R1478
Q1059
C1693
Q1052
R1743
R1748
U1008
C1710
N1013 R1507
R1483
Q1060 R1503 J R1018 Q1063 C1707
G R1014 R1017 C1839
R1756
R1380 R1779 R1778 R1509
C2336
R1381 C1845 R1464 R1508 C1032 D1000 Q1056 Q1055 N1036
I O D1001 R1013
R1783
U1030 N1025 Q1062
C1752
REQSOMI R1463 R1449
R2165
7
R1773
R1769
R1772
C1729
R1383 C1698 C2104 C2308 R2120
R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
R1396
R1398
R1399
R1126
R1867
R1865
R1864
R1861
R1858
R1855
R1271
R1216
R1217
ACKSIMO
CLKSIMO
R1031
C2214
SIMO
SOMI
R1145
R1415 R1233 F C1115 D1049
R1833 D1050 R1121
C2320
R1440 R1417 R1236 MN864778 R2091 R2096 C2188
AA R1129 R1123 D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095 C2187
Y
U1039
R1220 R2092 R2093 C2206 C1865 C1684 MN864778
W
C1307 HAINT0 R1106 3.3V
V
R1803
R1813
R1792
R1898
C1774
C1302
R1120
N1009 C2319 R1102 R1105 R1161
R1117
C1943
U
R1237 R1850
R1734 R1733
R2134 G C1090 D1037 R1881
T
C1305 C2321 R1160 Q1051 Q1050 C1703
X1003 12MHZ
C1758
C1772
C2323 R1852
R2122
R1883
R1437
C1336 C1337
1.1V
R1242 C2322 R1108 R1103 D1039 R1166 C1770 R1894
C1303
U1018 R1221 R1159
C2055 C2052
L1122 C1858 R1897 R1893
R1209
L1065
L1064
R1222 R1834 C1179 X1009 R1162
C1685
C1301 R2137
D1096
R1498
J
R1984
R1987
R1986
R1985
R1224
L1116
L1119
L1118
L1117
R1390 R1210 R1244 27MHZ G
R1223 R1500 R1486 R1993 F U1055 C1182
C1755
R1788
C1173 R1225 R1063
ADV7850
E
R2133
27MHZ
R1784
R1247 R1785
HAINT1
C1160
C1697
1.1V
C1161
R1389
R1245 C1738
R1835 R1775
R1759
X1007
C1174 C1078
R1753
D1114 D1118
D
R1226 D1115 D1119
R1388
R1171
C
C1309 C2103
23
NET2.5V
NET1.9V
R2136 B
R1994 D1112 D1116
C1300
D1009 D1011
D1005 D1007
A
U1018
D1008 D1010
D1113 D1117
27MHZ
D1004 D1006
L1123 L1112
L1113
C1311 A
X1000
27MHZ
CH0AMCLK
X1001
C1086
R5F56108VNFP
U1063
R1798 R1809
R1068 R1060
R1066 R1061
R1067 R1062
R1080
C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1785
R1265 HPD_P2
C1702
L1121
R1255
R1989
R1990
L1120
R1991
R1988
R1384 R1267 C1077 R1854
R1428
R1467
HSCL
R1431
C1339
C1325
C1344 R1206
R1805
D1106
R1747
R1095 C1689 U1061 C1696 D1130 D1133 D1134
C1686
D1085 D1086 D1087 D1088 R1268 C1202 CH0ASD1
D1092
D1044 D1042
D1048 D1046
C1838
D1043 D1041
D1047 D1045
L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 U1002 R1169 R1199 L1105
64 63
R1452
C1341
C1343
C2105 64
C1841
R1168
D1021 D1023
L1062
D1017 D1019
63
D1020 D1022
D1016 D1018
SW2_HINT L1104 C1856
D1058 D1060
D1054 D1056
C1746
C2044
R1887
L1057
D1053 D1055
D1057 D1059
C1204 D1079 D1080 D1083 D1084 C1747 R1866
R1213 R1257 R1251 SW1_HINT
R1253
D1024
U1019
R1272
C1203 USB_PWR_EN SW1 D1077 D1078 D1081 D1082 R1777
C1089
N1010 N1008 L1014 R1256 R1252 L1059
R1872
R1262 R1776
C1181
C1184
C2089 L1015 R1250
D1030
D1034
C2088
D1029
D1033
C2087 R1946 R1212 Q1058
C2084
R1983
R1958 D1136 C1186 J Q1003
Z1001 R1949 R1736 R1856 R1859 R1862
R1891
R1249
R1888
D1091 R1959 Q1009 D1107 D1108 D1109
D1036
D1032
Q1016 IN7_DET
D1031
D1035
R1096
R1097
R1455
IN2_DET
R1873
C1907 D1067 D1068 D1071 D1072 R1857 R1860 R1863
D1121
Q1010
R1456 C1916
D1111 D1110 D1120
R1435 D1090 R1443
R1448
C1185
Q1015
R1099
D1094
1.HPD
K1003 K1002 R1969 IN2 IN3 IN4 IN5 IN6 C
R1968 IN1_DET N1001 DDCSDA N1002 DDCSDAQ1005 IN3_DET N1003 DDCSDA IN4_DET N1004 DDCSDA Q1012 Q1011 N1005 DDCSDA IN6_DET N1006 IN7 N1007 DDCDATA N1031 N1030
U1043 U1044 IN2+5V
DDCCLK
IN3+5V IN4+5V IN5+5V DDCSDA
I IN6+5V
G F
IN1
+5V
2.DDCDATA
IN7+5V
2.DDCCLK
D1093
K1000
K1001
DDCSDA
2.HPD
IN5_DET
C1338
C1340
IN4
IN1 IN2 IN3 H DDCSCK
IN5 IN6 E D IN7
DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK
7:THERMALDETB
2:THERMALDETF
6:THERMALDETA
1THERMALDETE
C1721
R1000
L1058
C1007
C1006
C1003
C1005
C1004
R1675
C1000
C1001
C1002
R1680
C2114
R1670
C1614
C1613
Q1038
C1347
C1722 L1069
C1958 L1068
R1353
R1359
C2100 C2102 C2101
5:ASODET
3:DCDET3
4:DCDET4
C1720 C2112
C1718 R1352 Q1021 Q1019 Q1029 Q1024 R1358
C2094
C1294
C1716
U1065 R1372
C1291 R1375 C2130
C1407
C1404
C1405
C2093
C1409
R1485
C2099
R1342
L1052
R1336
R1570
C1420
C1411 C1410
9:THERMALDETC
7:CURRENT_DET
R1487
14:FRONT_RLY
C2097
10:DECIN_CR
8:DECIN_CB
C1427
C1425
C1423
C2116
8:AMPSIG_DET
R2042
C1289
R1370
6:DECIN_Y
4:DECIN_V
C1415
2:COMP_SW2
6:COMP_SW1
C1428 C2169
10:RLY_HIB
C2076 13:C/S_RLY
11:H/P_RLY
R1341
16:H/PGND
R2057
R1335
R2020 R2049
2:VAUXV
12:SB_RLY
C2098
R1764
R1765
9:DGND
7:DGND
5:DGND
3:DGND
C1715
11:DGND
1:DGND
U1027 C1439 R1571 C1950
15:H/PR
R2027 R2053
17:H/PL
C1441
C2092
1:DGND
3:V_INC
4:V_INB
5:V_INA
MX25L12835FMI C1925 C1421 R2028
C1426 C1434 C2150
C1432 U1048
R1569
R2032
C1413
C1412
C1287
C1416
R1580
C1620 R1565 C1418 R1584 R1579 R1572 R1332 R1348 C2133 R2033
C1654 C1848 R1578 C1429 C2156
R1980 R1976 R1582 C1444 C1435 Q1031 C2117
R1762
C1422 C1502 C2131
C1651 R1932
C1558
C1719
R1633 R1647 R1655 R1586 C2068 C2126
L1037
C1647
C1663
C2124
L1049
R1900
C1564 R1589 C1424 R1925
R1632
Q1040
C2081
C2078
C2069
R1644 R1651 R1618 C1458
C1524 C1519 C1522 C1520
L1038
C1472 C1440
C1442
R1931
C1957 R1902
C1482
R1953
R1954
R1955
C1592 C1349 C1501 C1460 R1899 C2118
R1718 C1714
R2037
C1595 C1649 MX25L1606EM21 C2060 C2061 L1089
C1528
C1529
C1593
C1669
C1476 C1471
C1591 C1530 C1527 C1656 R1907
C1653
C1503 C2110
C1468
C1450 C1474 R1598
C1658
C1650
C1495
C2067
R1921
R1494
R1920
C1559 C1668 C1457
C2079
C2065
C1666
C1478
C1451
C1469
C1507
C1508
R1627
C1452
C2083
C2080
C1461 C1454
C2071
C1594 C1521 Q1039
C2077
R1650 R1709 C1465 R1910
C1505
C1557 C1525
9:DAGND R1918
C1556 C1726
C2135
C1481
C2074
C2075
C1541
R1640
R1595
C1542
R1708
R1714
C1565
7:CEN+ C2143
R1616
R1600
R1592
C1518 C1515 C1563
C1477
R1615
C1526 R1689 C1917
C1622
C1636
R1606 R1611
C1516 R1604
I
R1688 R1919
C1550
C1553
15:DAGND
12:DAGND
21:DAGND
18:DAGND
G
C1583
3:DAGND
C1582 C1600 C1598
C1581 C1597 C1599
C1511
C1512
C1513
C1618 C1560 R1605
R1613 C1487
C1483 C1486
R1610 C1485
R1608 C1484
C1517
C1627
C1639
22:SBR+
C1628
DAGND
19:SBL+
O
23:SBR-
10:SW+
C2132
20:SBL-
R1694 C1910
8:CEN-
C1642
C1635
C1633
16:SR+
C1561
C1632
11:SW-
C1480
13:SL+
C1549
17:SR-
14:SL-
4:FR+
1:FL+
5:FR-
2:FL-
C1540 R1693 C1640 R1607 R1617
R1643
R1642
C1571 U1032
C1728
R1609
C1630
C1959
C1498
C1497
C1496
C1494
C1493
C1492
C1490
C1491
C1488
R1629
R1628
C1552
R1614
C1577 C1572
Q1070
C1970 C1586 C1579 C1573
C1554 C1544 C1671
C1545 C1548 C1578 C1621 R1712 C1643 C1826
C1585 C1570
C1576
C1634
C1596
C1537
C1535
C1538
C1536
C1539
C1855
C1830
R1829 R1646 C1566 C1629
C1953
C1952
C1580 R5F5210ABDFP
C1623
C1638
R1794
C1644
R1802 C1791
C1356 C1355
C1637
C1782 R1789
C1761 C1762 C1788 R1828 C1626 C1624
C1947
C1678 R1806 R1807 C1547 L1042 L1048 D1103
9:DACRTNGND
8:DACRTNGND
C1851 R1470
C1679
15:VOL_MUTE
R1471 C1712 R1744
R1472 R1758 C1711 C1946
C1760
C1792
C1797
C1787
L1080
L1081
13:MICGND
7:DM920R
C1534
L1039
5:DM920L
C1807
6:DAGND
4:DAGND
2:DAGND
R1473
C1610 R1661
C1609 R1660
C1608 R1659
C1607 R1658
R1634
R1636
12:VAUXR
R1749 R1757
R1631
R1630
10:VAUXL
3:A/D_R
11:AGND
C2299
1:A/D_L
B R1474
L1056
Q1071 C1803
L1054
L1090
L1091
L1092
L1093
L1096
L1095
L1098
L1099
L1097
L1094
14:MIC
L1101
L1102
L1100
L1111
C1790
U1066 C1832
L1126
L1127
C2201
C2213
C2216
C2231
C2255
C2281
C2309
C2300
C2232
C2269
C2305
C2291
C2294
C1748 C1843
R2155 R2149
R2161 R2153
R2168 R2158
R2170 R2166
C1793 C1705
R2173
R2174
R2175
C1871
C1870
L1109 C2337 C1849
C1779
C1778
C1764
R1818
C1750
C1756
C1768
C1189
C1674
C1676 C1919 C1926 C1971 C1972 C1967 U1001
Q1071 C1176
C1177
R1819
R1190 C1191
U1056
R1020
6:PRE_Z2_MUTE
5:TU_GPIO2_INT
DGND
MAIN_PWR C1190
D5V
1:TU_SCLK/SCL
C1677
2:TU_SDIO/SDA
R2169
R2167
R2160
R2154
L1103
L1106
DGND R1197 R2138 R1087 R1022 C1731 R1770 C1188 C1899 C1872
R1201
D5V
7:PRE_MUTE
L1070 C1723
R1476
R1475
4TU_RST/ST
Q1067
DGND R1198 R1090 R1024 C1187
R1094 R1025 C1192
3:TU_SEN
D5.2V R1195 U1067
C1732
C1730
C1733
R1502
R1497
R1492
R1491
R1488
R1469
C1869
C2047 C1995 C1993 C2045
C1924
D5.2V R1088
R1457
R1458
R1459
R1460
R1461
R1462
R1185 R1191 U1004 R1027 L1071 C1868 C1875
R1085
U1057 C1725 L1073 C1874 R1387
Q1017
R1868
C2028
C1987
C2030
C1981
C1982
C2033
C2035
C1984
C2038
C2303 C1853
C1033 R1006 R1010
R1411
C1324
C2203
C2205
C2204
C1012
C1024 R1012 R1011
B
C1015
R1366 R1422
C2277
C1973 C2304
R1493
R1490
C2026 R1128
C1093
C1014
C1989 C1975 C1157 R1130 C2280 R1367 R1423 R1402
L1082
R1227
C1144 C2289 R1053 C1076 R1037 C1010 R1394 R1408
C1159 R1132 R1368 C1321
C1142
C1130
C1127
R2172
C1146
C1149
R1786 R1808
C1156
C1154
C1097
C2290
C1147
C1073
C1071
C1062
C1061
L1084
C1059
C1047
C1044
C1063
C1013
C1976
C1064
C1066
C1011
R2124
R2123
C1876
C1171
R1214
R1139 R2150 C2295 R1058 C1037 L1003
C1034
C1978 C2002
R1466
C1759
C2003
C1912
C1990
C1861
C1335
C1166 R1119 R2144 C C1083 C1780 L1107
C1125
R2142
C1151
C1836
C2218 C2234
R1118
L1013
L1019
C2223 C2235
C2220 C2236
R1059
R2126 L1010
C1110
R2163
C1106
Q1064
R2147 A R1264
C2005 C2006 C1835
C1860
C2217
C1298
R1234
C2340
C1986 C1983
C1122 C1165
R2159
C1107
C1829
C1116
R1442
C1862
R2162
C2001
Q1069
C1136 C1137 C1102 C1067 A
C1121
C1163 C1164
R1407
R1406
R1404
R1403
R2131
C1741
C1742
C1739
R1385
C1735
C1139 C1873
C2219
C2229
C2227
C2228
L1075
L1074
C2193
C1057
C2341
C1027
C1706
L1006
C1023
C1699
R2140 L1005
R2171
C1909
L1011 R1397
C1081
C1080 C1041
L1012 C2190
C1109
C1101
R1951
C1126 C1140 C1068 R1950 R1400
C1737 L1077 R1421
C1091
C2325C2191
C2195
C2194
C2198
C2192
C1966
R1192 C1743 L1076 R1947
C1100 C1043 C1050
C2268 C2265
C2266 C2263
C2267 C2258
R1432
R1433
R1434
R1451
R1801 R1752 R1175 L1007 R1086 C1051 Q1036 R1450Q1037 C1342
C2015
R1246
C1330
C1332
R1964
R1957
Q1006
C1009
R1263
C1695
R1740
L1087 C1700
R1735
C2012
C1902
L1002
C2013 C2031 R1812 C1854 R1761 C1114 L1061 C1030 U1042 C2085
C2034
C2036
C2032
C2017
C2020
C1026
C2248 C2242
C2022
R1189
C1018
C2016
C1158
C1842
C2271 C2292
C2273 C2293
R2127
C2021
C2023
C1008
L1000
Q1007
C1099
C1901
C2246
C2252
C2240
C2244
C1079 R1961
R1141
C1162
C1119
R1260
C1111
C2272
C1985 C1045
C1038
L1085
C1692
C2008
R1240
C
C2018
C1992
C2009
R1079
L1088
C2106 U1010
C2226
D1139
C2039
14:REMOTE3.3V
C2200
23:ZVOL_DATA
17:FRONT_IRIN
22:ZVOL_CLK
19:KILLIR_MZ
10:VOL_DATA
15:MUTE3.3V
9:VOL_CLK
18:RC_OUT
13:232OMI
12:232IMO
2:DA_+5V
1:DA_+5V
16:RC_IN
11:TRG1
6:A_+7V
5:A_+7V
8:M3.3V
7:DGND
4:A_-7V
3:A_-7V
20:D5V
(B SIDE)
SW7000
CN4402
GND
GND
11. GND
VBUS
10. +5V
9. BT_TX
R7029
R7031
R7028
R7030
7020-07500-020-1S 8. GND
7. BT_RX
6. NET3.3V
5. BT_PRIORITY
4. BT_LDO_ON
CLAMP7000
IN ICT OP ADJ FI 3. WLAN_ACTIVE
2. BT_EINT G4400
1. BT_ACTIVE
5.2V
5.2V
N7000
GND C4463
C7016
GND
N7005
Pb N7000
C7007
C7000
R7004
J4449
U7000U7000
JK4400
C7005
BD82065FVJ-E2
N7001
N7002
BKT4001
C7015
120PIN PLUG VBUS
C7009
2 1 DATA-
L7002
JK4400
R7005
Pb
R7053
R7038
DATA+
R7009 GND
R7010 R7011 GND
R7012
R7013
R7015 N7005
R7027
C7013
R7014
BKT7001
C7014
(A SIDE)
R7047
R7052
R7046
R7020 R7051
R7045
R7050
R7023 R7044
R7049
R7043
R7048
120 119
(A SIDE)
Bluetooth test point
IC6000 CP6001
X6000
CP6001
R6001
32.768KHZ
C6009 IC6000 R6000 C6000
TC7SGU04FU
C6004 C6001
C6005
R6006 R6005
L6000
C6002
C6007
iBT-06-02S
L6002
C6003
C6006
R6009
R6007
R6004
L6001
U6001
R6010
BD00HA3MEFJ
R6011
R6008
Pb U6000
IBT-06-02
BLUETOOTH [MP]
(A SIDE)
89
6. SMPS
DC 5V is not output.
NO
YES YES
Are there the damage in D4142 /
Has a fuse (F4140) broken? Replace the damaged part(s).
D4143 / D4144 / D4145 / IC4140?
NO
YES
Are there any short circuits caused by Repair the short circuited area(s) by the
the soldering of the PCB? soldering of the PCB.
NO
YES YES
Are any parts damaged? Check the damage of each part. Replace the damaged part(s).
90
Operation waveform for each part
A B
After primary side rectification Primary drain
OPTION (Caution: High voltage, electric shock) (Caution: High voltage, electric shock)
OPTION
OPTION
C
After secondary rectifications
OPTION
T4140
●
OPTION ● ●
TR4140
IC4140
OPTION
SMPS unit
(Unloaded) A B C
Set A B C
91
Personal notes:
92
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK
CH0ASD0 36 2
TC74VHC244
18 83 RXI2S0 ③
CH0ASD1 35 4 16 82 RXI2S1
IC1003 CH0ASD2 34 6 14 81 RXI2S2
MN8647781 CH0ASD3 33 8 12 78 RXI2S3
HDMI Rx
CH0ALRCLK 32 17 3 77 RXFS
CH0ABCLK 31 15 5 76 RX64FS
DAC256FS 26 14
SCKI
CH0AMCLK 136 13 7 75 RXMCK 33 7
DAC64FS BCK
RXSPDIF 73 RXSPDIF
34 6
DACFS LRCK
U1008
CX870 U1048
NETWORK PCM1690
PROCESSOR DAC
DIR output
30
DACDATAF 8
DIN1
26
NET/USB_MCK 68 NET/USB_MCK 29
DACDATAC 9
DIN2
NET/USB_BCK 30 67 NET/USB_BCK
28
28
DACDATAS 10
DIN3
NET/USB_LRCK 66 NET/USB_LRCK
27
DACDATASB 11
DIN4
2 NET/USB_DATAF/FR 34 64 NET/USB_DATAF/FR
CH1: DATA
97
DATAF
① DATAC 98
99
DATAS
DATASB 100
14
DSP1OUT64FS
CH2: fs 15
DSP1OUTFS
32
OPTICAL1 RX3 RX6 29 41
DIRARC
3 75 98
DSP1IN64FS DSP1IN64FS DSP1OUT64fs
33
OPTICAL2 RX2 RX5 30 41
DIRRXSPDIF
4 97 99
DSP1INFS DSP1INFS DSP1OUTfs
COAXIAL2 35
RX1 U1040
CH3: 64fs
Detail A
8 86
PCM9211 DSP1INF/FL 100 DSP1INF/FL DATAF
37
COAXIAL1 RX0 MPIO_A1 4 54
SLRCK1
DIR/AD
3 55
103 DSP1INLR DATAC 94
R1901
MPIO_A2 SBCK1 7 95 73
DSP1INCSW/SW DSP1CSW/SW DATAS
17 47
DOUT DATADIR1
DSP1INS/C 6 74
DSP1INS/C DATASB 88
18 44
LRCK FSDIR1
DSP1INSB/SL 5 101 DSP1INSB/SL U1024
19 43
BCK 64FSDIR1
DSP1IN-/FR 16 77
DSP1IN-/FR ADSP21487KSWZ3B
IC4200 SCKO 20 42
256FSDIR1 DSP
54
ANALOG Lch R2A15218FP A/D_L 47
VINL DSP1IN-/SW 18 55
DSP1IN-/SW
ANALOG Rch ANALOG VOL A/D_R 55 48
VINR
DAC input &SW
②
U1040
3 PCM9211
DIRO1
R1914
R1915
R1916
CH1: DATA
N1033
17
C2174 N1019 CLAMP1000
CLAMP1001
R2074
C2181
C2179
C2178
R1356
R1374
U1050 C1293 R1943 R1945
Pb
C2123 C1295 R1369C1292 R1371 U1045
R1361
R1355
R1360
R1354
R1350
R1357
Q1023
C2160C2161
DSP1OUT64FS
N1032
R2068
C2175
C2177
DSP1IN F_FL
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
DSP1INFS
N1014
R1567
R1574
R1672
R1563
R1564
ICT OP ADJ FI
C1402
C1417
C1419
C1406
C1408
C1414
C1431
IN
R1340
R1975
R1929
F/HDMI
C1911
R1339
R1974
R1338R1337
C1920 C1913
R2061
C2096
R1934
C2172
R1971
R1349
R1347
VSYNC
N1028
C2115 R1573
R1938
R1937
R1936
R1935
C1672
R1716
R2013
R1715
C1619
R1972
Detail B
R1929
R1575R1581
C1665
C2113 HSYNC
R1933
C1968
R2017 N1027 R1577
R2021 C2149 C2136 C2058 C2059 Q1018
A B
CH2: fs
C2129
R1981
R1982
C1436
R1639
R1635
R1685
R1686
C1646C1670
C1645
R1338R1337
C2151
R1576
K4T51163QJL1053
C2134 R1928 C1438
C2119 R1901 R1927 C1447
H
23
D
C
B
F
E
A
C2121 R1763 R1562R1824 R1704 PCK R1641
R1926 R1591 R1766C1456R1821 R1690
R1924 VSYNC
R1940
R1939
123
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
HSYNC
U1029
C1437 R1767 C1459 R1720 C1617
R1702 R1701
R2038 C2164 AVSCL
C2062 R1566 R1568 DE
R1593 C1463R1820 R1722 R1683
R1934
N1035
AC
AB
AA
R1930
R1942
R1941
W
M
C2162 R2047
H
R
P
D
C
B
R1724
Y
V
E
F
A
L
T
J
SPI_CS
789
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
C2070 X1008 24.576MHZ
R1703 5
R2069 R1713 6 R1668
C1915
C1906
C1904
7
R1905 R1904
R1667
R1822
R2072
DAC256FS
R1823
8
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430
C1784
R1933
ADV8003_IN1
R1914
C2072 11
R1915
R1916
Q1030
R2085 C1479 R1707 ADV8003_IN0
X100627MHZ
C1611 C1612
U1028 K4T51163QJ
C2185 C2073 Q1067 ADV8003_RST
R1731
R1588
R1662
TX_TEST1
L1029 R1912 5M80ZT100C5N
R1625
17
Q1049 Q1048 R1590 R1620
C1655
M
N
H
R
P
D
C
B
E
F
A
L
J
R1879 D1124
R1913 R1795 C1470 R1621R1622R1623 R1624 R1697 20
21 D
D1073
N1017 R1719 22
123
C1945
C1944
R1698 C
U1024 R1721 23
L1040 R1178 R1184
2 40
CH3: 64fs
ADSP21487 R1619 R1626 D1074 R1183
R1878
C1567
C1969 C1921
C1509 C1510 R1692 C1575 U1026 C1170 R1177
DACDATAAF
R1723 C1568 L1051 R1187R1180 D1076
R1258 X1005 R1725 ADV8003 R1188R1179D1075
15
789
L1047
C1569
L1044
L1045
R1076 R1727
CY 920 MODULE
C1574
R1695
R1254 21.875MHZ
R1874 R1876
L1046
R1885 R1886
R1479
D1126 D1125
1 39 R1070 R1075 R1729 L1043 E
R1482
R1481
C1751
R1484
H C1087D1025 C1543
R1363
R1522
R1365
R1787
R1814
R1815
R1997
C1775
D1026R1069 R1696
R1746
R1750
R1147 R1150
L1136
C1713
R1081R1072D1028 C1551
N1029
C1350
C1351
R1998
R1928
R1504
R1505
R1506
R1831
R1827
C1328
C1789
R1830
R1799
R1793
R1810
C1749
R1043 R1152 R1149 D1064
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1638
R1637
R1039 R1042
D1089
C1357
R1519
R1521
R1520
R1518
R1517
R1545
R1544
C1352
C1680
L1027
C1951
C1954
R1477
3.3V
C1353
R1927
C1727
C1681
R1364
R1345
R1362
R1344
C1840
C1297 C1296 R1044R1041D1015
C1941
R1741
C1923
C1354
DAC64FS
Q1027 Q1026 U1007 C1346 C1940
L1055
Q1043
R1480
2 1 R1755
C1709 R1751
R1782
2 1
R1478
R1754
C1693
Q1059 Q1052
R1926
R1743
R1748
C1710
U1008
N1013 R1507
Q1060 R1503 J R1018 Q1063 C1707
G
R1756
C2336
R1464 R1508 C1032D1000 Q1055 N1036
R1924
R1783
R1381 C1845
C1752
I O U1030 N1025 D1001 R1013 Q1062 Q1056
REQSOMI R1463 R1449
7
N1021
C1729
R2176
R2177
R2178
R2179
R2180
C2308 R2120
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
CH4: 256fs
R1396
R1398
R1399
DACFS
R1867
R1865
R1864
R1861
R1858
R1855
ACKSIMO
R1126
CLKSIMO
R1216
R1217
R1031
DGND R1271
SIMO
SOMI
R1145
R1415 C2215 F C1115 D1049
D1002 R1015 R1021
D1003 R1016 R1019
AB
R1922
R1440R1417 R1236 MN864778 R2091 R2096C2188
AA R1129 R1123D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095C2187
Y
U1039
C1307 R1220 R2092 R2093C2206
W
C1865 C1684 MN864778
R1803
R1813
R1792
HAINT0 R1106
C1774
3.3V
V
R1120
C1302 R1898
R1117
R1734R1733
R1237 R2134 G C1090D1037 R1881 R1850
X1003 12MHZ
Q1050 C1703
T
C1305 C2321 R1160 Q1051 R1851
U1005R1207 R1238 D1038 R1101 C1769 R1882
C1758
C1772
C1704
R2122
C1304 R1163
R1437
C1336C1337
1.1V
C1306 R1242 C2322 R1108R1103D1039 R1166 C1770 R1894
C1303
C2055C2052
L1122 C1858 R1897 R1893
R1221
L1065
L1064
R1209 R1159
64FSDIR1
R1834 C1179 R1162
C1685
D1096
R1222
R1917
C1301 R1498 X1009 J
R2137
R1208 C1172
R1984
R1243
R1987
R1986
R1985
L1116
L1119
L1118
L1117
C1348 R1496
H
C1308 R1244 R1224 27MHZ
R1390 R1210
G
R1223 R1500 R1486 R1993 U1055 C1182
C1755
R1788
F
C1173 R1063
27MHZ
R1784
R1247R1785
C1160
C1697
R1225
R1245C1738
C1161
R1835 R1775
ADV7850
R1759
1.1V
E
X1007
R2133 HAINT1
R1753
R1389 C1174 R1226 C1078
D
D1114 D1118
23
R1171
D1115 D1119
NET2.5V
NET1.9V
R1388
C
C1309 R2136 B C2103
R1994 D1112 D1116
D1009D1011
D1005D1007
C1300
D1008D1010
27MHZ
D1004D1006
L1123 L1112
L1113
A
U1018 D1113 D1117
X1000
C1311 A
27MHZ
X1001
C1086
U1063
R1798R1809
CH0AMCLK
R1068R1060
R1066R1061
R1067R1062
R1080
R5F56108VNFP C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1702
HPD_P2
C1785
R1255
L1121
R1989
R1990
R1265
L1120
R1991
R1988
R1428
R1906
R1467
C1077
R1431
C1339
C1325
R1805
D1106
FSDIR1
D1085 D1086D1087 D1088 C1689 CH0ASD1
R1268 C1202
D1044D1042
D1048D1046
N1011 D1129
D1043D1041
D1047D1045
R1199 L1105
C1841
D1021D1023
U1002
D1017D1019
C2105 64 63
D1020D1022
D1016D1018
R1880 C2043C2042
C1850
L1104 C1856
D1058 D1060
D1095
D1054D1056
C2044
INT
R1887
D1053D1055
D1057D1059
R1213
U1019
R1272
R1872
N1010 R1256 R1252
C1181
R1776
C1184
R1262 R1250
D1030
D1034
L1015
C2088
D1029
D1033
R1908
C2089 Q1058
C2084
R1983
R1958 D1136 R1948 R1215 Q1003 1.1V
Z1001 C1186 J R1856 R1859 R1862
R1891
R1249
R1888
R1959 R1949 R1736
D1036
D1032
R1096
R1097
Q1009
IN2_DET
Q1016 IN7_DET
R1873
R1455
D1121
C1907 R1857 R1860 R1863
Q1010
Q1015
D1065 D1066D1069D1070
D1094
C1185
1.HPD
K1003 K1002 C2090 C1905R1967C2091 R1969 IN2 IN3
Q1005 IN4 IN5 IN6
IN7 C
R1869 R1870 R1871
N1007
DATADIR1
R1968 IN1_DETN1001 DDCSDA N1002 DDCSDA IN3_DET N1003 DDCSDA IN4_DETN1004 DDCSDAQ1012 Q1011 N1005 DDCSDA IN6_DETN1006 DDCDATA N1031
N1030
U1043 U1044 IN2+5V
DDCCLK
IN3+5V IN4+5V IN5+5V DDCSDA
I IN6+5V
G F
2.DDCDATA
IN1
+5V
2.DDCCLK
IN7+5V
PCM9211
D1093
K1000
K1001
2.HPD
DDCSDA
C1338
C1340
IN4 IN5_DET
IN1 IN2 IN3 H DDCSCK IN5 IN6 E D IN7
DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK
93
LEVEL DIAGRAM
LEVEL DIAGRAM
FRONT ch
R2A15218FP
ANALOG H/POUT
LINE IN + SPEAKER
GAIN
+
PCM1690
PCM9211 + +
PLD D/A
A/D - -
MUTE PRE OUT
DSP
ZONE2
EXT IN
(SR5009 ONLY)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB +20dB
1.41Vrms PCM1690 DOLBY LIMIT LEVEL (ALLch-3dBFS)
PCM9211 0dBFS
+29dB
0dBFS=1.06Vrms
-35dB
+10dB +10dB
-10dBFS
-10dBFS
-20dBFS(DIG.IN)
LINE IN/EXT IN
200mV 0dB -26.5dBFS(A/D IN) 0dB
-2.0dB PREOUT
-20dBFS +3dB -2+6.5=+4.5dB 150mVrms
-12dB -20dBFS
H/POUT
-2+12=10.0dB 79.6mVrms
A/D IN
-10dB -10dB
50mVrms
-2+12+6.5=16.5dB
(-26.5dBFS) -30dBFS
+3dB
-30dBFS
SW NO
-32dBFS(DIG.IN)
-20dB -38.5dBFS(A/D IN) -20dB
GAIN setting of MASTER VOL 00dB
-40dBFS ・SW:YES (DIGITAL) -2.0dB = -2.0dB
・SW:YES (ANALOG) -2.0dB 6.5dB = +4.5dB
-40dBFS
・SW:NONE (DIGITAL) -2.0dB +12dB = +10.0dB
・SW:NONE (ANALOG) -2.0dB +12dB +6.5dB = +16.5dB
-30dB (1) (2) (3) -30dB
(1):Basic OFFSET of VOL=0dB
(2):OFFSET of SW NON
(3):OFFSET of the AD input
-40dB -40dB
94
LEVEL DIAGRAM
CENTER ch
R2A15218FP
+ SPEAKER
GAIN
PCM1690 (SR5009 ONLY)
+ +
PLD D/A
- -
MUTE PRE OUT
DSP
EXT IN
(SR5009 ONLY)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB 1.41Vrms +20dB
DOLBY LIMIT LEVEL (ALLch-3dBFS)
0dBFS
+29dB
+10dB +10dB
-10dBFS
-20dBFS(DIG.IN)
-2dB
EXT IN PCM or DD Config1
200mV 0dB -26.5dBFS(A/D IN) 0dB
PREOUT
-20dBFS +3dB 159mVrms
-2+6.5=4.5dB
-26.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
95
LEVEL DIAGRAM
SUBWOOFER ch
R2A15218FP
SW1
GAIN
PCM1690
+ + (SR5009 ONLY)
PLD D/A
- -
MUTE PRE OUT
DSP
EXT IN
(SR5009 ONLY)
+30dB
MAX SIGNAL LEVEL
0dBFS
+10dB +10dB
-10dBFS
PREOUT
317mVrms
-2dB
EXT IN
200mV 0dB 0dB
PREOUT
-20dBFS 159mVrms
-2+(20-6)=12dB
INPUT : -20dBFS(DIG.IN) PCM -34dBFS(PCM.IN)
-10dB -10dB
200mV(A/D IN) -40.5dBFS(A/D IN)
-30dBFS
-30dB -30dB
-50dBFS
-40dB -40dB
96
LEVEL DIAGRAM
SURROUND ch
R2A15218FP
+ SPEAKER
GAIN
PCM1690 (SR5009 ONLY)
+ +
PLD D/A
- -
MUTE PRE OUT
DSP
EXT IN
(SR5009 ONLY)
+30dB
0dBFS
Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS) +29dB
+10dB +10dB
-10dBFS
-23dBFS(DIG.IN)
-2dB
EXT IN PCM or DD Config1
200mV 0dB -29dBFS(A/D IN) 0dB
PREOUT
-20dBFS +6dB -2+6=4dB 150mVrms
-2+6.5=4.5dB
-29.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
97
LEVEL DIAGRAM
SURR.BACK ch
R2A15218FP
+ SPEAKER
GAIN
PCM1690
+ + (SR5009 ONLY)
PLD D/A
- -
MUTE PRE OUT
DSP
EXT IN
(SR5009 ONLY)
+30dB
SP OUT
NON CLICP MAX SIGNAL LEVEL 4.0Vrms
4.48Vrms/8Ω
SP OUT(D/A OUT)
0dBFS
1.41Vrms DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
+20dB +20dB
0dBFS
+26dB
+10dB +10dB
-10dBFS
-30dBFS
-32.5dBFS(DIG.IN)
DD EX Config2
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
98
LEVEL DIAGRAM
ZONE2
R2A15218FP
from
F-ch
from
TO DA SB-ch + SPEAKER
LINE IN +
MAIN
NET/USB DAC
D/A
BD3812F
ZONE2
+30dB
SP OUT
0dBFS
2.0Vrms PCM5100 MAX SIGNAL LEVEL 2.00Vrms
+20dB +20dB
0dBFS
-20dBFS(DIG.IN)
LINE IN
200mV 0dB 0dB
-20dBFS PREOUT
-18.0dB
16.0dB
-10dB -10dB
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
99
BLOCK DIAGRAM
GND DIAGRAM
AC CORD
AUDIO IN B'D
TU_PACK
SPK_RLY_GND
HDMI B'D
CX870
VOL_IC
ADV8003-8B
MAIN_CPU
SUB_CPU
HDMI RX
ADV7850
HDMI TX
CODEC
V_PLD
A_PLD
DSP
DIR
D_GND D_GND
D_GND
HDAM B'D
FRONT R GND
FRONT L GND
SPK_RLY_GND
SBR GND
SBL GND
SR GND
SL GND
C GND
V_GND
SMPS_S3
D_GND
F_CNT_B'D
VIDEO B'D
PRE_OUT B'D
RET_GND
AMP +B S1 SPK_RLY_GND SPK_RLY_GND
RET_GND RET_GND
SPK B'D
H/P GND
D_GND
AGND
VIDEO AUDIO
D_GND
H/P GND
AGND
VOLUME B'D
FUNCTION B'D FRONT B'D
D_GND D_GND
USB B'D
V.AUX
MIC F_HDMI B'D
CHASSIS
HP B'D
100
POWER DIAGRAM
VCC DIAGRAM
S1(AMP +B)
AC OUTLET
S2(+8V,-8V)
MAIN TRANS
Except SR
AC CORD
NET3.3V(CX870/MFI341S2164)
NET1.2V(CX870)
MAIN PWR ON
NET1.8V(CX870:OPEN)
NET1.9V(CX870)
101
WIRING DIAGRAM
WIRE DIAGRAM
HDMI B'D
TUNER PACK
AUDIO IN B'D
CX870
MODULE
HDAM B'D
SMPS B'D
PRE_OUT B'D
Except SR
40P
VOLUME B'D
FRONT B'D
SELECT B'D
USB B'D
V.AUX
102
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CP6001
R6012
BD00HA3MEFJ
11. D/MGND
10. +5V
L6002
C6001
9. BT_TX
6. BT_3.3V
C6000
8. M/DGND
1. BT_ACTIVE
7. BT_RX
4. LDO_ON
3. WLAN_ACTIVE
2. BT_EINT
L6001
L6000
BLUETOOTH [MP]
11 HDMI PCB 7020-07508-020-0S [MP]
CLAMP1000
17
C6006
N1019
N1018
N1033
C2174 R6001
U6001
R6006 R6005
CLAMP1001
C6005
5. BT_PRIORITY
R2074
C2181
C2179
C2178
R1374
R1356
32.768KHZ
C6002
U1050 C1293 R1371 R1943 R1945
Pb
R1369 C1292 U1045
R6007
C2123 C1295
R6008
Q1023
R1361
R1355
C1290
R1360
R1354
R1350
R1357
C2125 C1288 R1373
X6000
R1376 R1944
IC6000 R6000
C2160 C2161
R2078 5M80ZT100C5N
IBT-06-02
B B
U6000
R2066 C2128
C6004
O
C6003 R6004
N1032
R1351
C6007
R2068
C2175
C2177
TC7SGU04FU
DSP1OUT64FS
C6008
DSP1IN F_FL
I
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
N1014 R1672
OP ADJ FI
R1567
R1574
R1563
R1564
DSP1INFS
C1431
IN
C1402
C1417
C1419
R2067 ICT
C1406
C1408
C1414
N1000 DE R1673 R1674
R1340
D1138 C1433 C1908 R1001 R6011
R6003
U1052 PCK R1676
R1999 C2168 C2176 Q1028 Q1022 Q1020 R1583 R6002
R1343
Q1025 R1682 R1677
R6010
R1346 R1585 R1975
R1937
R1936
R1935
R2002 R1681
R1929
C1911
F/HDMI
C6009
C1286 C1922 R1974
R1339
C2137 C1443
R1338 R1337
C1920 C1913 R1970
R1940
R1939
Pb
R2010 C1949 R1934 C1449 DA1.1V
R2061
C2096
C2172
R1971
R6009
R1930
R1942
R1941
VSYNC
R1349
R1347
R2013 C2115 R1573
N1028
R1972
C1672
R1716
R1715
C1619
C2146 C2113 Q1030 R1575 R1581 R1973 HSYNC
C1665
R1933
R2017 C2111 N1027 R1577
C1968
C2149 C2136 C2058 C2059 Q1018
R2021 C2129 C1436
R1981
R1982
C1646 C1670
R1639
R1635
R1685
R1686
C2151 C2134 R1928 C1438
C1645
K4T51163QJ L1053
R1576
C2119 R1901 R1927 C1447
H
G
D
C
B
E
F
A
C2121 R1763 R1562 R1824 R1704 R1641
23
1 2 3
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
C1437 R1767 C1459 HSYNC C1617
R2038 C2164 R1720
U1029
AVSCL
R1702 R1701
C2165 C2062 R1566 R1568 R1593 R1820 R1722 DE R1683
R1922 C1463 R1732 R1699
N1035
R2044 C1448 SPI_MO
AC
AB
C1466
AA
W
M
U
H
R
P
D
C
B
E
Y
V
A
C2162 R2047
L
R1724
J
SPI_CS
7 8 9
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
R1906 Q1072 R1728 4
C C2171 R1669
C
C2070 X1008 24.576MHZ
R1703 5
C2082
R2069 R1908 R1599 R1713 6 R1668
BKT1001
C1915
C1906
C1904
7
R1667
C2064 C2063
R2072
R1905 R1904
R1822
R1823
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430 ADV8003_IN1
C1784
C2072 11
R1914 R1707
R1915
R2085
R1916
C1479 ADV8003_IN0
C2185 Q1067
C1611 C1612
X1006 27MHZ
C2073 ADV8003_RST
U1028 K4T51163QJ
U1041 R1596
R1731
R1588 R1706
N1034
R1662
L1029 R1912 5M80ZT100C5N R1590 17
TX_TEST1
R1625
C1315 C1318 R1909 Q1049 Q1048
C1655
N1015 C1948 R1620 Q1073 18
19
M
N
H
R
P
D
C
B
E
F
A
L
J
R1697
R1797
R1795 20
R1913 C1470 R1621 R1622 R1623 R1624
D1124
21 D
N1017
1 2 3
R1719 22
R1698 C
D1073
C1945
C1944
U1024 R1721 23
L1040 R1178 R1184
2 40 ADSP21487 R1619 R1626 C1567 D1074 R1183
R1886 R1879
R1877 R1892
C1170 R1177
D1123 D1135
R1692 C1575
R1878
C1969 C1921
C1509 C1510 R1723 C1568 U1026 L1051
ADV8003 R1187 R1180 D1076
R1258 X1005 R1725 R1188 R1179 D1075
7 8 9
L1047
15
R1076
C1569
R1727
L1044
L1045
R1695
R1254 21.875MHZ
CY 920 MODULE
C1574
1 39
R1876
L1046
R1479
D1125
R1070 R1075 R1729 L1043 E
R1482
R1481
H C1087 D1025 C1543 R1151
C1751
Q1068 C1327
R1484
R1997
R1363
R1522
R1696
R1365
N1026
D1026 R1069
R1787
R1814
R1815
C1775
R1147 R1150
R1746
R1750
R1081 R1072 D1028 C1551
L1136
C1713
R1998 R1717
N1029
C1350
C1351
R1874
C1153 D1061
D1122
R1504
R1505
R1506
R1885
R1875
D1126
R1082 R1071 D1027 L1050
R1742
C1708
D1104
R1831
R1152 R1149 D1064
R1827
C1789
R1830
R1799
R1793
R1810
C1749
R1816 R1043 R1153 R1148 D1063
C1314 C1319
C1316 C1317
R1825
C1313 C1320
C1390
C1387
R1039 R1042
R1638
R1637
R1558
D1089
C1357
R1519
D D
R1521
R1520
R1518
R1517
U1033
R1545
R1544
R1817 R1513 R1514 R1515 IC1070 D1012 CLAMP1002 C1546 C1680 D1101
L1030
L1028
DV1.8V
C1352
D1013 R1038
L1027
D1102
3.3V
C1394
C1401
Q1069
C1727
C1951
C1954
R1477
U1022
C1353
C1297 C1296 R1044 R1041 D1015
R1546
C1681
R1364
R1345
R1362
R1344
C1392
C1840
C1396
C1941
Q1046
R1741
C1923
R1378 R1377 R1516
C1354
R1512
C1675
D1100
C1346 C1940
C1398
Q1027 Q1026 U1007 Q1043 R1547 C1393
L1055
2 1 R1755
2 R1549
R1480
1
C1709 R1751
R1782
Q1047
R1754 R1552
R1478
Q1059
C1693
C1395
R1743
R1748
U1008
C1710
C1391
R1483
Q1060 R1503 J R1018 Q1063 C1707
G R1014 R1017 C1839
C1397
R1756
C1386
C1389
C1388 R1559
C2336
R1381 C1845 R1464 R1508 C1032 D1000 Q1056 Q1055 N1036 R1560 R1561
I O D1001 R1013
R1783
U1030 N1025 Q1062 R1550
C1752
R1463 R1533
Pb
REQSOMI R1449 R1554
R2165
7
L1132
R1664
R1665
L1135
R1663
L1134
R1657
L1133
R1382 Q1041
R1556 R1555
N1021
R1601 R1553
R1773
R1769
R1772
C1729
R1383 C1698 C2104
C1383
C1382
C1384
C1381
C1380
C2308 R2120
R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318 N1038 L1034
R1396
R1398
R1399
C1385
R1126 L1035
R1867
R1865
R1864
R1861
R1858
R1855
R1271 R1557
R1216
R1217
ACKSIMO
CLKSIMO
R1031
C2214
SIMO
R1122 R1125
SOMI
R1145
R1415 R1233 F C1115 D1049
R1833 D1050 R1121
C2320
R1440 R1417 R1236 MN864778 R2091 R2096 C2188
AA R1129 R1123 D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095 C2187
Y
U1039
R1220 R2092 R2093 C2206 C1865 C1684 MN864778
W
C1307 HAINT0 R1106 3.3V
V
R1803
R1813
R1792
R1898
C1774
C1302
R1120
N1009 C2319 R1161
E R1102 R1105
E
R1117
C1943
U
R1237 R1850
R1734 R1733
R2134 G C1090 D1037 R1881
T
C1305 C2321 R1160 Q1051 Q1050 C1703
X1003 12MHZ
C1758
C1772
C2323 R1852
R2122
R1883
R1437
C1336 C1337
1.1V
R1242 C2322 R1108 R1103 D1039 R1166 C1770 R1894
C1303 R1221 R1159
C2055 C2052
L1122 C1858 R1897 R1893
R1209
L1065
L1064
R1222 R1834 C1179 X1009 R1162
C1685
C1301 R2137
D1096
R1498
J
R1984
R1987
R1986
R1985
R1224
L1116
L1119
L1118
L1117
R1390 R1210 R1244 27MHZ G
R1223 R1500 R1486 R1993 F U1055 C1182
C1755
R1788
C1173 R1225 R1063
ADV7850
E
R2133
27MHZ
R1784
R1247 R1785
HAINT1
C1160
C1697
1.1V
C1161
R1389
R1245 C1738
R1835 R1775
R1759
X1007
C1174 C1078
R1753
D1114 D1118
D
R1226 D1115 D1119
R1388
R1171
C
C1309 C2103
23
NET2.5V
NET1.9V
R2136 B
R1994 D1112 D1116
C1300
D1009 D1011
D1005 D1007
A
U1018
D1008 D1010
D1113 D1117
27MHZ
D1004 D1006
L1123 L1112
L1113
C1311 A
X1000
27MHZ
CH0AMCLK
X1001
C1086
R5F56108VNFP
U1063
R1798 R1809
R1068 R1060
R1066 R1061
R1067 R1062
R1080
C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1785
R1265 HPD_P2
C1702
L1121
R1255
R1989
R1990
L1120
R1991
R1988
R1384 R1854
CX870JUNCTION (A SIDE)
R1267 C1077
R1428
HSCL
R1467
R1431
C1339
C1325
C1344 R1206
R1805
D1106
R1747
R1095 C1689 U1061 C1696 D1130 D1133 D1134
C1686
D1085 D1086 D1087 D1088 R1268 C1202 CH0ASD1
D1092
D1044 D1042
D1048 D1046
C1838
D1043 D1041
D1047 D1045
L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 U1002 R1169 R1199 L1105
64 63
R1452
C1341
C1343
C2105 64
C1841
R1168
D1021 D1023
L1062
D1017 D1019
63
D1020 D1022
D1016 D1018
SW2_HINT L1104 C1856
D1058 D1060
D1054 D1056
C1746
C2044
R1887
L1057
D1053 D1055
D1057 D1059
C1204 D1079 D1080 D1083 D1084 C1747 R1866
R1213 R1257 R1251 SW1_HINT
R1253
D1024
U1019
R1272
C1089
N1010 N1008 L1014 R1256 R1252 L1059
R1872
R1262 R1776 BKT7000
C1181
C1184
D1030
D1034
C2088
D1029
D1033
F F
C2087 R1946 R1212 Q1058
C2084
R1983
R1958 D1136 C1186 J Q1003
Z1001 R1949 R1736 R1856 R1859 R1862
R1891
R1249
R1888
D1091 R1959 D1107 D1108 D1109
Q1009
SW7000
D1036
D1032
Q1016 IN7_DET
D1031
D1035
R1096
R1097
R1455 IN2_DET
R1873
C1907 D1067 D1068 D1071 D1072 R1857 R1860 R1863
D1121
Q1010
R1456 C1916
D1111 D1110 D1120 11. GND
R1435 D1090 R1443
R1448
C1185
Q1015
CX870 JUNCTION PCB
R1099
D1094
1.HPD
K1003 K1002 R1969 IN2 IN3 IN4 IN5 IN6 C 10. +5V
R1968 IN1_DET N1001 DDCSDA N1002 DDCSDAQ1005 IN3_DET N1003 DDCSDA IN4_DET N1004 DDCSDA Q1012 Q1011 N1005 DDCSDA IN6_DET N1006 IN7 N1007 DDCDATA N1031 N1030
U1043 U1044 DDCCLK
IN2+5V
IN3+5V IN5+5V DDCSDA 9. BT_TX
R7029
R7031
IN4+5V
R7028
R7030
IN6+5V
7020-07500-020-1S
I
G F 8. GND
7. BT_RX
IN1
+5V
2.DDCDATA
6. NET3.3V
IN7+5V
2.DDCCLK
D1093
5. BT_PRIORITY
K1000
K1001
DDCSDA
2.HPD
IN5_DET
C1338
C1340
IN4
IN1 IN2 IN3 H DDCSCK
IN5 IN6 E D IN7 4. BT_LDO_ON
DDCSCK DDCSCK CLAMP7000
DDCSCK DDCSCK DDCSCK DDCSCK
IN ICT OP ADJ FI 3. WLAN_ACTIVE
2. BT_EINT
1. BT_ACTIVE
IN1 IN2
5.2V
C7016
GND
N7005
G Pb N7000
G
C7007
C7000
R7004
U7000
C7005
BD82065FVJ-E2
N7001
N7002
HDMI (B SIDE)
C7015
120PIN PLUG VBUS
C7009
2 1 DATA-
L7002
R7005
R7053
R7038
DATA+
R7009 GND
7:THERMALDETB
2:THERMALDETF
6:THERMALDETA
1THERMALDETE
R7010 R7011 GND
C1721 R7012
R1000
L1058
C1007
C1006
C1003
C1005
C1004
R1675
C1000
C1001
C1002
R1680
C2114
R1670
C1614
C1613
Q1038 R7013
C1347
C1722 L1069
C1958 L1068
R1353
R1359
C2100 C2102 C2101
5:ASODET
3:DCDET3
4:DCDET4
C1720 C2112
Q1021 Q1019 Q1029 Q1024
R7015 N7005
C1718 R1352 R1358
C2094
C1294
C1716
H H
U1065 R1372
C1291 R1375 C2130 R7027
C1407
C1404
C1405
C2093
C1409
R1485
C7013
C2099
R1342
L1052
R1336
R1570
R7014
C1420
C1411 C1410 BKT7001
9:THERMALDETC
7:CURRENT_DET
R1487
14:FRONT_RLY
C2097
10:DECIN_CR
8:DECIN_CB
C1427
C1425
C1423
C2116
8:AMPSIG_DET
R2042
C1289
R1370
6:DECIN_Y
4:DECIN_V
C1415
2:COMP_SW2
6:COMP_SW1
C1428 C2169
10:RLY_HIB
C2076 13:C/S_RLY
11:H/P_RLY
R1341
16:H/PGND
R2057
R1335
R2020 R2049
2:VAUXV
12:SB_RLY
C2098
R1764
R1765
9:DGND
7:DGND
5:DGND
3:DGND
C1715
11:DGND
1:DGND
15:H/PR
R2027 R2053
17:H/PL
C1441
C2092
1:DGND
3:V_INC
4:V_INB
5:V_INA
MX25L12835FMI C1925 C1421 R2028
C1426 C1434 C2150
C1432 U1048
R1569
R2032
C1413
C1412
C1287
C1416
R1580
C1719
C1663
C2124
L1049
R7050
R1900
C1564 R1589 C1424 R1925
R1632
Q1040
C2081
C2078
C2069
R1644 R1651 R1618 C1458 R7049
C1524 C1519 C1522 C1520
L1038
C1472 C1440
C1442
R1931
C1957 R1902
C1482
R1953
R1954
R1955
C1592 C1349 C1501 C1460 R1899 C2118 R7043
R1718 C1714
R2037
C1595 C1649 MX25L1606EM21 C2060 C2061 L1089 R7048
C1528
C1529
C1593
C1669
C1503 C2110
C1468
C1450 C1474 R1598
C1658
C1650
C1495
C2067
R1921
R1494
R1920
C1559 C1668 C1457
C2079
C2065
C1666
C1478
C1451
C1469
C1507
C1508
R1627
C1452
C2083
C2080
C1461 C1454
C2071
J J
C1594 C1521 Q1039
C2077
R1650 R1709 C1465 R1910
C1505
C1557 C1525
CX870JUNCTION (B SIDE)
9:DAGND R1918
C1556 C1726
C2135
C1481
C2074
C2075
C1541
R1640
R1595
C1542
R1708
R1714
C1565
7:CEN+ C2143
R1616
R1600
R1592
C1518 C1515 C1563
C1477
R1615
R1606 R1611
C1516 R1604
I
R1688 R1919
C1550
C1553
15:DAGND
12:DAGND
21:DAGND
18:DAGND
G
C1583
3:DAGND
C1582 C1600 C1598
C1581 C1597 C1599
C1511
C1512
C1513
C1627
C1639
22:SBR+
C1628
DAGND
19:SBL+
O
23:SBR-
10:SW+
C2132
20:SBL-
R1694 C1910
8:CEN-
C1642
C1635
C1633
16:SR+
C1561
11:SW-
C1632
C1480
13:SL+
C1549
17:SR-
14:SL-
4:FR+
1:FL+
5:FR-
2:FL-
C1540 R1693 C1640 R1607 R1617
R1643
R1642
C1571 U1032
C1728
R1609
C1630
C1959
C1498
C1497
C1496
C1494
C1493
C1492
C1490
C1491
C1488
R1629
R1628
C1552
R1614
C1577 C1572
C1970 C1586 C1579 C1573
C1554 C1544 C1671
C1545 C1548 C1578 C1621 R1712 C1643 C1826
C1585 C1570
C1576
C1634
C1596
C1537
C1535
C1538
C1536
C1539
C1855
C1830
R1829 R1646 C1566 C1629
C1953
C1952
C1580 R5F5210ABDFP
C1623
C1638
R1794
C1644
R1802 C1791
C1356 C1355
C1637
C1782 R1789
C1761 C1762 C1788 R1828 C1626 C1624
C1947
C1678 R1806 R1807 C1547 L1042 L1048 D1103
9:DACRTNGND
8:DACRTNGND
R1470
R7035
R7034
R7033
R7032
C1679 C1851
15:VOL_MUTE
R1471 C1712 R1744
R1472 R1758 C1711 C1946
C1760
C1792
C1797
C1787
13:MICGND
L1080
L1081
7:DM920R
C1534
L1039
5:DM920L
C1807
R1819
6:DAGND
4:DAGND
2:DAGND
R1473
R1661
R1660
R1659
R1658
R1634
R1636
12:VAUXR
R1749 R1757
10:VAUXL
R1631
R1630
3:A/D_R
11:AGND
C2299
1:A/D_L
B R1474
L1056
Q1071 C1803
L1054
L1090
L1091
L1092
L1093
L1096
L1095
L1098
L1099
L1097
L1094
14:MIC
L1101
L1102
L1100
L1111
K K
C1790
U1066 C1832
C1610
C1609
C1608
C1607
L1126
L1127
C2201
C2213
C2216
C2231
C2255
C2281
C2309
C2300
C2232
C2269
C2305
C2291
C2294
C1748 C1843
R2155 R2149
R2161 R2153
R2168 R2158
R2170 R2166
C1793 C1705
R2173
R2174
R2175
C1871
C1870
L1109 C2337 C1849
C1779
C1778
C1764
R1818
C1750
C1756
C1768
C1189
C1674 C1919 C1926 C1971 C1972 C1967 U1001 C1176
C1676 R1190 C1191 C1177
U1056
R1020
6:PRE_Z2_MUTE
5:TU_GPIO2_INT
DGND
MAIN_PWR C1190
D5V
1:TU_SCLK/SCL
C1677
2:TU_SDIO/SDA
R2169
R2167
R2160
R2154
L1103
L1106
DGND R1197 R2138 R1087 R1022 C1731 R1770 C1188 C1899 C1872
R1201
D5V
7:PRE_MUTE
L1070 C1723
R1476
4TU_RST/ST
R1475
3:TU_SEN
R1195 U1067
C1732
C1730
C1733
D5.2V
R1502
R1497
R1492
R1491
R1488
R1469
C1869
C2047 C1995 C1993 C2045
C1924
D5.2V R1088
R1457
R1458
R1459
R1460
R1461
R1462
R1185 R1191 U1004 R1027 C1868
L1071
C1875 5.2V
R1085
U1057 C1725 L1073 C1874 R1387 R7006
Q1017 N7003
C7006
5.2V N7004
R1868
C2028
C1987
C2030
C1981
C1982
C2033
C2035
C1984
C2038
C2303 C1853
C1033 R1006 R1010
R1411
C1324
C2203
C2205
C2204
C1012
C1024 R1012 R1011
B
C1015
R1366 R1422
C2277
C1973 C2304 1 2
R1493
R1490
C2026 R1128 1 2
C1093
R1227
C1144 C2289 R1053 C1076 R1037 C1010 R1394 R1408
C1159 R1132 R1368 C1321 GND
C1142
C1130
C1127
R2172 R7003
C1146
C1149
R1786 R1808
C1156
C1154
C1097
C2290
C1147
C1073
C1071
C1062
C1061
L1084
C1059
C1047
C1044
C1063
C1013
C1976
C1064
C1066
C1011
R2124
R2123
C1876
C1171
R1214
R1139 R2150 C2295 R1058 C1037 L1003
C1034
C1978 C2002
R1466
C1759
C2003
C1912
C1990
C1861 VBUS
C7001
C1335
C1166 R2144 C1083
C7008
R1119
C7010
C1780 L1107
L L
C
C1125
R2142
C1151
C1836
C2218 C2234
R1118
L1013
L1019
C2223 C2235
C2220 C2236
R1059
R2163
C1106
Q1064
R2147 A R1264 DATA+
C2005 C2006 C1835
C1860
C2217
C1298
R1234
C2340
C1986 C1983
C1122 C1165
R2159
C1107
C1829
C7003
C7002
C1116
R1442
C1862
GND L7000
C2210
C2212
C2010
R2162
C2001
R7040 R7026
R7039 R7025
C1739
R1385
C1735
L7001 C7012
C1139 C1873
C2219
C2229
C2227
C2228
C7004
L1075
L1074
C2193
C1057
C2341
C1027
C1706
L1006
C1023
C1699
R2140 L1005
R2171
C1909
L1011 R1397
C1081
C1080 C1041
L1012 C2190
C1109
C1101
C2325C2191
C2195
C2194
C2198
C2192
C2196
R7016
L1004 C1022
C1966
R1192 C1743 L1076 R1947 GND
C1100 C1043 C1050
C2268 C2265
C2266 C2263
C2267 C2258
C7011
R1992 C1169 C1021 R1266 R1952
R1432
R1433
R1434
R1801 R1752 R1175 L1007 R1086 C1051 R1451
Q1036 R1450Q1037 C1342 +5V
C2015
R1246
C1330
C1332
R1964
R1957
Q1006
C1009
R1263
C1695
R1740
L1087 C1700
R1735
C2012
C2020
C1026
C2248 C2242
C2022
R1189
C1018
C2016
C1158
C1842
C2271 C2292
C2273 C2293
R2127
C2021
C2023
C1008
L1000
Q1007 R7008
C1099
C1901
C2246
C2252
C2240
C2244
C1162 C1028
C1119
R1260
C1111
C2272
L1085
C1692
C2008
R1240
C C2221
C2018
C1992
C2009
R1079
L1088
14:REMOTE3.3V
C2200
23:ZVOL_DATA
17:FRONT_IRIN
22:ZVOL_CLK
19:KILLIR_MZ
10:VOL_DATA
15:MUTE3.3V
9:VOL_CLK
18:RC_OUT
13:232OMI
12:232IMO
2:DA_+5V
1:DA_+5V
16:RC_IN
11:TRG1
6:A_+7V
5:A_+7V
7:DGND
8:M3.3V
4:A_-7V
3:A_-7V
20:D5V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
103
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
JACK5003
JACK5002
JACK5005 JACK5001 AVR SERIES 5P
A A
BKT5003
R5740
C5678
INPUT (A SIDE)
C4207
R5011 R5014
RC-5 DVD-Cr OUT_Cr DVD-Cb OUT_Cb DVD-Y OUT_Y SAT-Cr C-OUT SAT-Cb C-DVD SAT-Y C-SAT PRE_SW2 PRE_SW1 Z2_L Z2_R
C5679
R5004 R5027 R5028
R5737
D5617
R5039 R5038 C5010
C5007 C5006
R5037
R5069
R5070
R5071
R5035 R5034
R5736
C5033 R5033 C5008 C5009 R5029
D4203
D4202
R4205
R4204
VIDEO B'D
Q5628 Q5630
D4201
D4200
C5024 C5018 C5026 C5017 C5027
C4208
C5025 C5023 C5021
INPUT B'D
1.0-9-4PW
N4700
J5039 R4200
7028-07494-102-0
J5071 R4201
B 7028-07495-101-0 J5021 C4200 R5020
C5015 Q5629
B
C5014
J5001 J5022 C4204 C4209 R5022
R5026
C5016
R5025
R5024
R5023
CLAMP702
R4202 R4215 R4216
R5718 J5038 C4203 C4201
R5312 R4203
R5002
R5003
R5036
TU_GPIO2/TUNED
TU_RST/ST J5000 J5031
JACK4202
R5021
TU_SEN JACK4201
R5019
R4294 J5005 C4211 C4205 C4202
C5019
NJM2586AVC3C5020
TU_SDIO/SDA R4293 C4218 C5032
TU_SCLK/SCL Q4201 Q4200 Q4214 Q4218
TU_GND R4292
R5314
R5313
232OMI J5054 R5016
TUNER_R
NJM2595MTE1
C5012
TU_GND C4216 C4217 232IMO C5022 R4213 R4212 R4226 R4214R4229 R4217
REMOTE3.3V
R4234 R4223
R4235 R4224
TUNER_L C4212
C4554
IC5001
IC5002
C4215
BAR CODE
J5053 R5018
R5017
R5015
J5032
J5035
J5033
C4213 TRG1
J5041
A_+7V Q4203 Q4202 Q4212 Q4217
A_+7V
R4225
R4227
R4231
Pb
VOL_DATA A_-7V R4236 R4244 Q4219
BAR CODE
VOL_CLK A_-7V
J5043
VOL_LATCH TRG_GND
R4222R4242 R4228
R5007
R4243
R5010
R5008
D5V TRG_15V R4230
KILLIR C5013
C RC_OUT R4239 C
J5052
FRONT_IRIN IN ICT OP ADJ FI C4222
7P/11P
J5024 CN5003 R5009
CN4703
J5036
J5037
C5255 MUTE3.3V C4210 C4206 C4221 ZONE2_L Q4206Q4205 Q4204
9P
R4237
R4258R4241
R5341R5310 REMOTE3.3V J5025 AGND AGND
C5266 232IMO J5030 R4245
232OMI ZONE2_R ZONE2_R
TRG1
R4240
MUTE_Z2 MUTE_Z2
R5340 MVOL_DATA J5027 J5013 PRE_MUTE PRE_MUTE
17P
C5011
23P
IC5201 MVOL_CLK PRE_SW1 PRE_SW1
M3.3V J5051 AGND
R5323 UTC4580 M/DGND AGND
R5304 A_+7V J5028 J5014 J5070 C4220 D5V(MX) D5V(MX)
C5265 A_+7V KILLIR KILLIR
A_-7V RC_OUT RC_OUT
A_-7V FRONT_IRIN FRONT_IRIN
IC4200 DA_+5V J5026 J5029
J5050
CN4701 RC_IN RC_IN
R5336
J5047
J5044
J5048
J5049
M3.3V
Q5626
J5042
MUTE_3.3V MUTE_3.3V
A_-7V A_-7V
C5258 R4248 A_-7V A_-7V
7P
IC5202 ZONE2_L R4244 PRE_MUTE J5040 J5006 Q5625
R5719
J5069
C4232
MUTE_Z2
C4236
R4257
BD3812F R4291
CP4202
ZONE2_R R4247
D EXT_FR MUTE_Z2 TU_GPIO2/TUNED ZD4200
ZJ3.6B
C5663
D
IN
C4247
C4555
ICT
Q4215
R5720
C4230
J5055
EXT_C
17P
AGND CP4203
D4211
D4210
AGND
R5710
R5711
EXT_SR D5V
KILLR Q4213 Q4208
OP ADJ
A_-7V MIC_GND
R4326
R4370
FI
R4296
Pb
VAUX_L
RET_GND
C4226 C4227 RET_GND J5010
R4298
R4297
R4301
R4371 USB_R J5012
J5056
CN4006 DAGND
E E
R4299
C4225 USB_L J5003
R4302 R4303 R4304
R4373 DAGND J5023 R4305
R4372
C4229
R4374 A/D_R
CP4205 DAGND
11P
R4375
COMPONENT SW2
COMPONENT SW1
A/D_L
CLAMP701
C5029
COMPONENT SW2
C5028
COMPONENT SW1
23P
PREMUTE_SB
PREMUTE_SB
C2145
PREMUTE_S
PREMUTE_F
PREMUTE_S
PREMUTE_F
AMP_MUTE
AMP_MUTE
MUTE_+7V
MUTE_+7V
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
SBR-
D/MGND
D/MGMD
D/MGMD
C4242 SBR+
NJM8080
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
VDICR
VDICB
C2141
VDIPY
V.AUX
CVBS
CN401 DAGND
V_INC
U1051
VGND
VGND
V_INA
V_INB
D4212
VDICR
VDICB
VDIPY
V.AUX
V_INC
V+5V
V+5V
V_INB
V_INA
VGND
VGND
CVBS
SBL-
V-5V
V-5V
V+5V
V+5V
C5031
C4243
V-5V
V-5V
R2062C2171R2058 SBL+
NC
NC
NC
NC
NC
NC
DAGND
R2065
R2064
R2063
R2059
R2056
R2055
SR-
AGND
AGND
AGND
AGND
AGND
AGND
SR+
SL
SR
FL
FR
A_-7V DAGND
C
11P 13P 7P
RET_GND C4241 SL+
PRE_SW
R2046R C2167C2166
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SW+
U1047
A_+7V
SBL
SBR
R2045
R2051
R2050
R2048
R2054
DAGND
SL
SR
FL
FR
DA_+5V
2052
C
DA_+5V R2013C2146R2010 C-
F TRG_GND C4240 C+
F
R2009
R2011
R2008
R2016
R2015
R2014
R2047C2162R2044 DAGND
TRG_15V FR-
CN4205 FR+
C2148 C2142
FL-
R4288
R4289
15P R2001C2140C2139 FL+
R2007
R2006
R2003
R2000
R2005
R2004
R4290
C4237 C4238 CP4201
R2002C2137R1999
CP4605
17P
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBR
SW
SBL
SR
FR
SL
FL
C
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBR
SBL
SW
SR
FR
C
FL
SL
BKT5001
G G
R5072
INPUT (B SIDE)
BURRING
SR5009 ONLY
D4203
R4205
D4207
D4209
R4211
C4210
R4220
R4207
D4202
D4208
D4204
D4205
D4206
R4208
R4209
R4550
C4550
R4552
R4206
R4210
C4209 C4553 C4204 R4221 CN4003 CP3403 CP5004
R4219 R4218 C4552 C4551 R4551 C4211
232OMI
H 232IMO R4217 R4232 TU_GPIO2/TUNED
TU_RST/ST
HDAM_GND AMP_MUTE AMP_MUTE AMP_MUTE
HDAM_GND H
R4216
7P
M/DGND TU_SEN H/P_GND AGND NC NC AGND H/P_GND
TRG1 R4231 TU_SDIO/SDA FL NC NC FL H/P_L
A_+7V TU_SCLK/SCL H/P_L AGND MUTE_+7V MUTE_+7V AGND
R4230 R4229 TU_GND H/P_GND H/P_GND
A_+7V R4228 R4226 R4233 SL PREMUTE_F PREMUTE_F SL H/P_R
A_-7V TUNER_R H/P_R AGND PREMUTE_S PREMUTE_S AGND
21P
R4251
R4252
D/MGND D/MGND
C5256
R4249
R5345
J5019
7028-07494-201-0
J5020
MVOL_CLK V+5V CP5001 V+5V
PREMUTE_SB PREMUTE_SB
M3.3V R5300
J M/DGND
A_+7V C5253
R5315 V-5V
V-5V
V-5V J
A_+7V C5271 R5318 V-5V
A_-7V C5272 VAGND VAGND
13P
A_-7V VAGND VAGND
DA_+5V C5273 V+5V V+5V
DA_+5V V+5V V+5V
COMPONENT SW1 COMPONENT SW1
V_INA V_INA
CLAMP 303
V_INB V_INB
V_INC V_INC
ZONE2_L COMPONENT SW2 COMPONENT SW2
Pb
PRE_MUTE AGND NC NC
ZONE2_R C5269 EXT_FR D/MGND
MUTE_Z2 MUTE_Z2 AGND D/MGND
TU_GPIO2/TUNED EXT_FL R4287
TU_RST/ST C5270 AGND
TU_SEN EXT_SW R4277
J5063
J5062
J5061
J5060
J5059
J5067
J5066
J5065
J5064
PRE_MUTE AGND
TU_SDIO/SDA PRE_SW EXT_C R4276
TU_SCLK/SCL
CLAMP 302
AGND AGND
D5V EXT_SR
KILLR AGND
RC_OUT EXT_SL R4275 CP5000
FRONT_IR AGND
K RC_IN
MUTE_3.3V
EXT_SBR
AGND R4274
A_-7V
A_-7V
RET_GND
K
VOL_MUTE EXT_SBL R4273 D/MGND D/MGND
M3.3V RET_GND
R4262
VDICR VDICR
R4261
R2077
R2079
17P
USB_L D/MGND FLY_SB FLY_SB D/MGND
R4259
C5052
CLAMP 301
A/D_R RLY_HIB RLY_HIB
DAGND F5009B F5009A THERMALDETC THERMALDETC
A/D_L CN4002 AMPSIG_DET AMPSIG_DET
F5008 T1.6AL/250V
C5051
CURRENT_DET CURRENT_DET
-8V_IN COMPONENT SW1 COMPONENT SW1 -8V_IN
-8V_IN V_INA V_INA -8V_IN
RET_GND V_INB V_INB RET_GND
RET_GND V_INC V_INC RET_GND
C5050
SBR- R4268
15P
-5V_IN -5V_IN
AGND
AGND
AGND
AGND
AGND
AGND
DAGND R4270
PRE_SW SBR
FR
SR
SBL
-5V_IN
SL
-5V_IN
FL
C
SR- C2184C2186R2084
SR+ VGND VGND
R2081
R2080
R2083
R2086
R2087
R2088
SL+
CLAMP 300
+5V_IN +5V_IN
R4267
DAGND CP3401
C2138
R2082C2185R2085 F5007A
U1049
F5007B
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SW-
J5015
TRG 15V
SBR
TRG 15V
SBL
SW+
F5006 T1.6AL/250V
SR
FR
SL
FL
C- VDICR VDICR
C+
R2023
R2024
R2018
R2022
R2025
R2026
D/MGND
11P
D/MGND
R4264
DAGND
R4265
AUDIO_GND
VIDEO_GND
VDICB VDICB
R4263
FR-
AUDIO_AC
AUDIO_AC
VIDEO_AC
VIDEO_AC
FR+ D/MGND D/MGND
AUDIO_GND
VIDEO_GND
C2152C2153R2019
TRG_AC
DAGND
AUDIO_AC
VDIPY
AUDIO_AC
VDIPY
VIDEO_AC
VIDEO_AC
C5047
C5046
BKT5002
C2155C2158R2036
TRG_AC
F5005T1.25AL/250V D/MGND
C5048
D/MGND
V.AUX V.AUX
R2034C2157R2038 D/MGND D/MGND
M CP5003
M
F5005B F5005A TRANS 8P TAP
BURRING
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
104
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
AMP (A SIDE)
7CH AMP B'D
AGND
AGND
AGND
SBL
AGND
AGND
AGND
CP401
SBR
SBL
BAR CODE
FR
SR
FL
SL
IN ICT OP ADJ FI WIRE G400
C/S DIP
C
BKT400
7020-07497-000-0S
C408 G401 G401 G402
SBR
BONDING
FL SL C FR
WIRE J590 WIRE
R686
BONDINGR687
J598
B B
R557
SR
R427
C456 BONDING
R436
R600
R610
R609
C424
R514
R558 C440 C472 R713
R601 R644 WIRE
D418
Pb
BURRING R515 R471 R472
J509
VR404
D417
C474 BONDING
R716
R570
C410 R428 R527 R714 R699
R566
R613
R523
C442
R695
R480
R653
R643
D406
R711 J559
J591
R652
R710 R440
J589
R715
C488
D405
J468
D412
R696
TP401
D435
D436
R712
J401
J518 J535
D441
D442
R437 R484 R656 C504
D411
D424
R434 J402 J494 TP403 J539 J546
J572
D430
C458 VR403 J520 C476 J537 C490
VR401 C460 R571 C444 C438 VR402 C428 C426 J544 J558 WIRE C506
R441
C454
R572 VR405 C470 R615 C492 BONDING C508 WIRE
J427
VR407 BONDING
R521
R442 VR406
R509
J574
J557
J531
G400
R701
R465
R583
R625 R658
R410
R638
J479
R481
R607
R453
R567
C406 R516 C422
R497
C412
R614
R595
D423
C486 C502
R524
R669
R657
R626
R429 R602
R552
R485
R559
R528
R700
R529
D429
R422 R486
R540
R582
R438 C435 R611 G402
J505
R720
R452
R564
Q435
R414 C404 R495 R525 R478 R694
R473
Q471
R721 WIRE R650 WIRE
Q483
R568 R451 R688
R573
J586 R719 R577 BONDING R645 BONDING R697
R538
R717 R445 R482
R443
C436 R505 R654
Q472
C518
C468 TP405 R624
R616
R702
Q426
C R722
C
R659
Q411 Q447
J490
Q459
R487
TP404 R718 R723
Q460
R489
R668
C483
C451 R681
C467
R408 Q423 R620
C452 C519
R496
R530
R404 C499 TP402 TP406 R667
R409 Q448 Q436 R581 Q462 WIRE WIRE
J442 Q412 R539 Q414 Q424
Q438
J432 J458 R591 Q449 R461 BONDING
R677
BONDINGQ484
R634
J560
R418 J484 TP407
J510
R534
R548 R448 C500
R488
C484
R663
ZD401 Q437 R492 Q425
Q402 ZD407 J583 Q450 Q413 J562
J405
J500
Q401 D413 R574 R621 Q461 D437 Q473
J536
D419 ZJ5.1A C420
R617
D425
J570
J404
ZD404
R444
R531
ZD413
R592
R405 R578 Q474
ZJ5.1A
R673
R401
R544
J403 ZJ5.1A
R660
R630
R635
R533
R457
R535
JP539
R506
CN404
J512
J464
R403 D407 ZD416
JP558
ZD410 R491
J532
R585 R576 ZJ5.1A R662
JP544
R589
R619
JP494
THERMALDETE ZJ5.1A R447
J534
R402
R490
R705
R462 R664
R707
R575
R499
THERMALDETF
R549
J578
J406
DC DET3
R421
J566
R678
R456
J514
J448
C513
J552
J416
JP518
ZD419
JP574
R419
J526
JP535
JP520
J410
ZJ5.1A
J474
R703
J436
J422
DC DET4
R628
JP537
J540
J542
J538
J480
J533
JP416
J462
R536
J488
J457
J587
R413
J585
J440
J496
JP468
R629
R543
J465
R618
C515
R671
R661
R709
R708
R704
J414 ASO DET
J516
R446
J519
J438
J565
J571
J543
J482
J564
J492
CP405
J434
J568
J460
JP546
J439
R532
J513
J415
R706
J506
J418
JP442
J413
J407
J522
RADI THERMAL
R416
J441
J428
D D
R675
JP572
TR THERMAL SBL
J491
J431
J411
J430
J429
J493
R632
J584
R455
R503
NC
J486
J487
J508
J511
J569
C419
R546
J467
J485
J567
R542
J588
SBR
R672
J444
R459
CP402
J517
100/100
C427
R477
J515
C507
R692
J548
R433
D408
C489
C411
R627 R508
D432
C516
J463
R498
R412
R550
J547
R649
C491
C505
C517 SR
J412
C459
J573
D402
J545
SL
J408
D414
J409
J521
C473
J470
D420
C
C475
R606
J461
R563
R411
J443
J437
R454
R670
C409 FR
J489
FL
J541
C457
C441
J435
R493
J417
C443
J495
D426
R541
R420
D438
Q417
J469
R584
C425 CP403 J563
J561 +HIGHB
J453
+HIGHB
+HIGHB R551
C514 R520 C431 -HIGHB
R608
D403 D427 D409 D433 D439
R679
ZD403 ZD406 -HIGHB ZD418 C495 ZD421
C416 C432 C512
ZD409
C463 -HIGHB
J550
J524
J576
D416
J472
R636
C479
J446
J420
R507
D415 HIGHGND C496 C511
HIGHGND
J498
C480
J549
J523
J575
ZD402 C415 ZD405 HIGHGND ZD417 ZD420
R593
ZD411 ZD408 ZD414
J455
C447
J497
R463
PREGND
D428
J445
J456
J551
J473
J421
J525
J419
J499
J471
C471
E E
J577
J447
ZD415
C407 R565
J433 C455 J483 C439 J459 C423 J466 C487 J481 C503
J454 J507
R522
J424 R432 J450 J476 J502 J528 R476 J554 J580
R560 R519 R605 R648 R691
J425 J426 J451 J452 J477 J478 J503 J504 J529 J530 J555 J556 J581 J582
R561
R562
R517
R603
R604
R474
R646
R647
R518
R431
R689
R690
R430
R475
C430
C449
C497
C481
C414
C433
C446
C465
C478
C417
C494
C510
C402
C462
R502
R545
R569
R424
R425
R439
R526
R641
R554
R555
R588
R598
R597
R467
R468
R640
R683
R684
R612
R511
R512
R458
R483
R674
R698
R415
R631
R655
B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E
F F
G G
AMP (B SIDE)
SBL C SL FL
SBR SR
C501
C453
C526
H C485 C421 H
D455
C437
Q419
D449
Q432
Q420
D451 D447
C469
C509 D453 D445
C413
C521 C461
Q431 Q408 Q429 C405
C522
C523
C477
C445
C429 D448 D450 D443
C493 D452 D444
D456 D446
Q407
D454
Pb
R501
R500
J J
Q405
R586
R449
R464
R587
R733
R734
D457 R407
C403
D458
R731
R732
K K
R590
R547
Q478
Q406
Q418
Q466
Q415 Q442
R685 Q475 R469
Q430
R676 R633 R642 R460 R417 R426
Q454
R510
R504
R553
Q451
Q427
R513 R556
R682
R639
R423
R730 R729 Q463 R725 R596 R724
R727
R466 Q439 Q403
R599 R726
R728
C418
C482
C498
C466 C434
C401
C450
L L
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
105
J
L
F
K
E
B
H
D
C
A
M
1
1
2
2
SBL SBR SL SR C FL FR
3
3
R4019
J4107
J4117
TU_GND TU_+5V
7020-07492-000-0S TUNER_R CP4007 TUNERR
TU_GND TUNERL
J4104 TUNER_L
RLY4000
C4017
C4016
C4025
C4024
R4017
R4018
PACK4000
J4100 C4076
J4102
J4109 J4108 J4105 J4120
4
4
R4009
J4111
R4008
C4030
C4028
R4012
R4013
J4116 J4119
L4000 L4001 J4110
R4011 C4020 J4115
C4003 C4070
9P
R4002 J4106
L4005
R4010
C4006
C4007
R4004
R4015
R4014
SCREW
R4016 3X8
C4023
R4003
C4011
C4000
C4010
L4006 L4002
L4003 L4004 J4118
SCREW SR BKT4143
R4005
3X17
SL
J4114
J4098
C
A_-7V
R4007
R4006
FR Pb A_-7V
J4112 J4113 RET_GND
FL J4095 RET_GND
5
5
J4099
A_+7V
J4097
CN4213
DA_+5V
MAIN B'D DA_+5V
TRG_GND
GND
SBR
SBL
J4065 J4091 TRG_+15V
ZD4002
J4092 BAR CODE ZJ6.8B
R4053
R4000
CP4006
R4022
R4029
J4096
J4000
J4001
J4101
BONDING
C4058
J4094
C4062
J4089
2200/25
J4073
3300/16 R4031
BONDING
J4079
J4074
J4080
J4078
J4081
J4070
C4053 J4071 J4090
11P
R4027
R4024
R4025
R4026
R4023
J4128 C4065
6
6
J4076
JP4002
J4051
J4088
JACK4702 C4087
JACK4700 J5050
J4072
C4059
VAGND
V-5V
V-5V
V+5V
VAGND
AMPSIG_DET
DGND
THERMALDETC
RLY_HIB
RLY_H/P
4700/16
RLY_SB
RLY_C/S
H/P_R
HDAM_GND
HDAM_GND
H/P_L
H/P_GND
MUTE+7V
H/P_GND
CURRENT_DET
D4022
C4049 J4085 C4088
D4009
ZJ16B
ZD4158
ZJ3.6B
C4703
ZD4700
CN4212 D4017
J4083 RLY_F
D4029
D4028
D4027
D4025
J4082
J4064
Pb
PREGND
C4089
J4123
HIGHGND
D4036
HIGHGND J4067
CN4702
7P
J4103 D4020 J4046
C4707 -HIGHB R4068
J4028
J4027
J4045 J4066
TRG_+15V -HIGHB SCREW
J4075
D4030
J5053
J5052
D4034
D4035
4700/25
RS232C (A SIDE)
D/MGND R4069 J4055
TRG1 +HIGHB
7
7
RS232 B'D
D4038
D4010
CP4003
J4087
TRG_15V
TRG_15V
+5V_IN
+5V_IN
VGND
VGND
J4060
-5V_IN
-5V_IN
+8V_IN
+8V_IN
RET_GND
RET_GND
RET_GND
-8V_IN
-8V_IN
232IMO 15P
232OMI +HIGHB
J4058