SPECIFICATIONS OF THE 59P DOUBLE
Net Weight (Approximate)... 51.
Weight Crated (Approximate). 2 2... 0...
Wrenches & Extras)
Floor ‘Space Required Over All, ; ae
eR ANY ORO TAPES te OMB ee eg
Distance, Floor to Center of Drive Shaft |
Horse Power Requiréd » . . 2. 2 pu.
t
Size of Driving Pulley <0... Ls
Midtb et: Beles. Wu ystra Bile hye Sel e.g
Number of Revolutions of Driving Pulley
to Close One Can, . , |
Speed - Operate Machine 2 or 5 Cans Per Min.
r Faster than Cans are Delivered to it.
Smallest Diameter of Can Seamer will Close .
Largest Diemeter.or Can Seamer will Close, ,
Lowest Gan Seamer will Close.» .., . ,
Highest Can Seamer will Close... . . ,
Maximum Speed in Cah Shop - Gans Per Min.,
Maximum: Speed in Cannery - Cans Per Min.
Depends Upon Contents to be Sealed.
Number of. Revolutions of Filler Drive shaft.
per Can.
59P
Feb, 1944
8810 Lbs.
3810 Lbs.
54-7 /6"x725
69-1/8"
63-1/s"
By
12" x 43"
ar
5.4
#501 (5-1/16")
#610 (6-5/8")
33"
lo".
125
1-1/3SPECIFICATIONS FOR ANGELUS 59P M.S.L.F. SEAMER
“WITH MODIFIED STRAIGHT LINE CAN FEED
Minimum Can Dia. Seamer Will Close
Maximum Can Diameter
Minimum Can Height
Maximum Can Height
Net Weight Of Machine Approx.
Shipping Weight - Domestic Approx.
Export Approx.
Size Of Box For Export - 271.6 Cu.Ft.
TLW x 82"L x BL"H 4
Floor Space Required Over ALL
Height Over All
Distance Floor to Center Of Drive Shaft
Feed Table Height From Floor For 700 Tall Can
Horse Power Required (Allowing 2 H.P. For Filler)
Revolutions Of Drive Pulley Per Can
Revolutions Of Filler Drive Per Can-Straight Drive
Right Angle Drive
Intermediate Gear Drive
Filler Drive Safety Clutch Sprocket
Maximum Recommended Speed 150 Cans Per Minute For
Use in Closing Products Not Subject to Spill.
SOP M.S.L.F. MAR, '69
501 (5-1/16")
612 (6-3/4")
308 (3-1/2")
1000 (10")
3800 Lbs.
4100 Lbs.
5100 Lbs.
4a" x 96-9/4"
69-1/8"
6-1/8"
31-3/92"
5
5-3/8 or &
1-1/3
1
1
28 Tooth
#50 Roller Chain
(5/8 Pitch)
PAGE 2