Professional Documents
Culture Documents
Report
Report
Limiting KG - WARAO6
Stability 20.00.02.31, build: 31
Model file: C:\Users\Administrator\Documents\WARAO6 (Medium precision, 41 sections, Trimming off, Skin thickness
not applied). Long. datum: AP; Vert. datum: Baseline. Analysis tolerance - ideal(worst case): Disp.%: 0.01000(0.100);
Trim%(LCG-TCG): 0.01000(0.100); Heel%(LCG-TCG): 0.01000(0.100)
Damage Case - Intact
Criteria tested:
267(85) Ch2 - General Criteria 2.2.1: Area 0 to 30
267(85) Ch2 - General Criteria 2.2.1: Area 0 to 40
267(85) Ch2 - General Criteria 2.2.1: Area 30 to 40
267(85) Ch2 - General Criteria 2.2.2: Max GZ at 30 or greater
267(85) Ch2 - General Criteria 2.2.3: Angle of maximum GZ
267(85) Ch2 - General Criteria 2.2.4: Initial GMt
267(85) Ch2 - General Criteria 2.3: Severe wind and rolling
Displacement (intact) Draft Amidships Trim (+ve by stern) LCG m TCG VCG m Limit KG m min. GM
tonne m m m
10.00 0.137 0.000 11.819 0.000 -0.158 -0.158 32.344
42.22 0.462 0.000 11.898 0.000 -0.091 -0.091 11.159
74.44 0.752 0.000 12.123 0.000 -0.154 -0.154 7.502
106.7 1.010 0.000 12.162 0.000 -0.210 -0.210 5.978
138.9 1.247 0.000 12.160 0.000 -0.262 -0.262 5.274
171.1 1.463 0.000 12.076 0.000 -0.310 -0.310 5.047
203.3 1.661 0.000 Not set for LimitKG 0.000 Convergence error Convergence error Converg
235.6 1.857 0.000 Not set for LimitKG 0.000 Convergence error Convergence error Converg
267.8 2.050 0.000 Not set for LimitKG 0.000 Convergence error Convergence error Converg
300.0 2.240 0.000 Not set for LimitKG 0.000 Convergence error Convergence error Converg