Professional Documents
Culture Documents
Marco Material Datasheet E1069
Marco Material Datasheet E1069
Common Names:
Ethylene-Propylene (EP, EPDM)
General Description:
EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer which is characterized by wide range of
applications and good chemical resistance.
Features:
NSF 61 and AST F477 compliant
Good heat and compression resistance.
Resistant to ketones, hot and cold water, steam, alkalis, polar solvents, ozone, sunlight, alcohols, glycol engine
coolant and Skydrol (phosphate ester hydraulic fluid).
Limitations:
Not recommended for oils, gasoline, kerosene, aromatic and aliphatic hydrocarbon, halogenated solvents,
concentrated acids, non-polar solvents, petroleum oils and aromatic fuels.
Cure System:
Sulfur
Service Temperature:
-65 to 250o F (-54 to 121o C)
Specification:
ASTM D2000 M2BA710 A14 B13 F19 Z1 (Z1= NSF)
This information is to the best of our knowledge accurate and reliable. However, Marco Rubber makes no warranty, expressed or implied, that parts
manufactured from this material will perform satisfactorily in the customer’s application. It’s the customer’s responsibility to evaluate parts prior to use.
Request a Quote
HEAT RESISTANCE – A14, ASTM D 865 (70 hrs. @ 100oC) D2000 Specification Typical Test
Requirements Results
Hardness Change, points, max. +/-15 +0
Tensile Strength Change, %, max. +/-30 -3
Ultimate Elongation Change, %, max. -50 +1
COMPRESSION SET – B13, ASTM D 395 Method B (22 hrs. @ 70oC) D2000 Specification Typical Test
Requirements Results
Permanent Set, %, max. 50 6
LOW TEMPERATURE RESISTANCE – F17, ASTM D 2137 Method A, 9.3.2 D2000 Specification Typical Test
Requirements Results
(Non-brittle after 3 min. @ -55oC) Non-Brittle Pass
This information is to the best of our knowledge accurate and reliable. However, Marco Rubber makes no warranty, expressed or implied, that parts
manufactured from this material will perform satisfactorily in the customer’s application. It’s the customer’s responsibility to evaluate parts prior to use.