cay
1. - Undercarriage with telescopic co-avial
openable tracks
2 = Sell
counterweight
3 Base machine type SOILMEC powered by
BF8M1O15C diesel engine compete with
soundoroof canopy and maunted on the
new heawy duty 360° slewing rng.
4. - Winch assembly.
5. - The mast is mounted on a special
parallelogram system, which allows the
working radius to be varied maintaining
the mastin vertical position.
6 = Self erecting mast, whichis designed
to allow the max. torque along its
complete length tis composed of 2,6 m
long lower secon, 14,5 m long
intermediate element and 1,5 m top
extension
7 = Sheave cathead.
8 - Crowd cylinder with 6.5 m stroke
9 - Rotary head with spinoff speed and
shock absorbing device
10- Telescopic kelly complete with top
guide. Mechanical locking or fiction type
isavallble
11 Mechanical and hydraulic
pre-arrangement for casing oscillator.Anew model
R-940
The R-940 diling rig mounted on SOILMEC base carer has been specially designed to perform the fll
jobs:
~ Bored piles with or without drilling fluid;
= Casing with rotary head or by the use of an oscillator.
The main features of F-940 are the following
Machine dass: 120 ton;
Rotary torque: 469 kN:
Casing driving by rotary crowd system;
‘Advanced insteumentation
Reliability and safety,
Diesel engine meeting the most recent mission regulations;
Mechanical and hydraulic pre-attangement for casing oscilata (optional
Transport weight: 48 ton;
~ DRILL MATE SYSTEM on 10” touch screen for monitornig and control ofthe operating parameters
Memo-block for acquisition of data and software for processing them on PC station.
On request data transfer via GSM/GPRS with "calling on trouble” (optional)
~ Cable pull down (optional)
Max pile diameter mm 3000
Max cased diameter mm 2500
Max pile depth m 77 (92 m with friction kelly bar)
Max cased depth m a
Max casing height m 6
Cylinder pull-up down on casing/kelly kN 416/150
ton 115-120i
rca)
Overall length mm 6057
‘Track shoe width mm 900,
Overall width (opened side frames) mm 5000
Overall width (closed side frames) mm 3400
Ground pressure MPa. 0,13
Engine pe Deutz BF8M1015C
Max power KW (HP) 400 (536) @ 2000 rpm
rea es
‘Main pumps Wmin 2x 380
Hydr. power setting kW (HP) 247 (331)
Max working pressure MPa 32
1 layer nominal line pull kN 320
1 layer nominal rope speed mimin 1
Rope diameter mm 32
Petia) rr et
1 layer nominal line pull
1" layer nominal rope speed rmitnin 90 90
Rope diameter mm % 6
Maximum torque kN 469
Max spin off speed. pm 3
Maximum drilling speed ‘pm 19
Max push / pull cylinder force iN 330/416 (on casing)
‘Max push force on kelly kN 153
Pull down cylinder stroke mm 6500
Cable pull down (14 m stroke) kN 400
retro rr is
‘Transport width mm: 3400 / 3000.
‘Transport height mm: 3818/3440"
‘Minimum transport weight ‘on 48%
toyea dees eas ola EU SUSE st Usd