5114122, 730 AM DBE. Element Design
D8.E.8 Element Design
Element design will be performed only for the moments MX and MY at the center of the element. Design will not
be performed for Sx, SY, SXY, SQX, SQY, or MXY. Also, design is not performed at any other point on the surface
of the element.
Atypical example of element design output is shown below. The reinforcement required to resist Mx moment is.
denoted as longitudinal reinforcement and the reinforcement required to resist My moment is denoted as
transverse reinforcement (Refer to D8.E.1 Section Types for Concrete Design). The parameters FYMAIN, FC, and
CLEAR listed in D8.£.3 Design Parameters are relevant to slab design
Other parameters mentioned in the design parameters table are not applicable to slab design.
ransverse
y Longitudinal
‘Sign convention of loaded plate element
Example element design input
Element design per the IS 456 code
UNIT MMS
START CONCRETE DESIGN
‘CODE INDIA
FYMAIN 415 ALL
MAXMAIN 68 ALL
DESIGN ELEMENT 43
END CONCRETE DESIGN
Example element design output
{ie:13C:/Program Files Bertoy/Engineering/STAAD.Pro CONNECT Edlion/Melp/GUID-2830B4EB-C231-4474-85A7-DC32FBEECSE2 NimI?gHIS 4565114/22, 790 AM
ELEMENT DESIGN SUMMARY
ELEMENT LONG. REINF
(SQ.m"/mE)
47 TOP : 156.
Bort: 351.
{ie:13C:/Program Files Bertoy/Engineering/STAAD.Pro CONNECT Edlion/Melp/GUID-2830B4EB-C231-4474-85A7-DC32FBEECSE2 NimI?gHIS 456
DBE. Element Design
MOM-x /LOAD TRANS. REINF
(kN-M/H) (SQ.M™/ME)
eee/ @ 156.
-15.83/ 3 44g.
MOM-Y /LOAD
(kN-M/)
2.00 /
-20.00 /
22