Professional Documents
Culture Documents
Grounding Instalation Procedure Engl
Grounding Instalation Procedure Engl
DEPARTEMENT
Rev. No : 0
AEI-PRC-003 Grounding System Installation Procedure Page 1 of 5
Rev. No : 0
AEI-PRC-003 Grounding System Installation Procedure Page 2 of 5
1. Purposed
1. Earthing Bar
2. Grounding Rod
3. Grounding Wire
4. Mold Cable
5. Conduit Pipe
6. Cable Lug
7. Clamp Conduict
8. Fisher Nylon
9. Nuts and Bolt
10. Duct Seal
b. Equipment
Rev. No : 0
AEI-PRC-003 Grounding System Installation Procedure Page 3 of 5
3.1. Preparation
3.1.1 Check document technical spesification grounding rod that be installed.
3.1.2 Check instruction drawing detail type installation,material acsessories grounding rod
that be installed.
3.1.3 Check actual location grounding that be installed reference bu IFC drawing.
3.2 Instalation
3.2.1 Mark position grounding rod location.
3.2.2 Plug it in grounding rod at location installation by hammer until suitable with
drawing instruction type.
3.2.3 Install rebar cage around sides of base and across cover if necessary
3.2.4 Bedding sand fill
3.3 Testing
3.3.1 Check earth tester and make sure that earth tester ready to use
3.3.2 Measure the grounding rod use earth tester accordance manual guide instruction
3.3.3 Notes the result of measure resistance
PROCEDURE ELECTRICAL & INSTRUMENT
DEPARTEMENT
Rev. No : 0
AEI-PRC-003 Grounding System Installation Procedure Page 4 of 5
Rev. No : 0
AEI-PRC-003 Grounding System Installation Procedure Page 4 of 5