This document summarizes the results of a test to determine the setting time of hydraulic cement using a Vicat needle. It records the time, trial number, and penetration depth in centimeters of the needle into the cement mold at regular intervals. The initial setting time was determined to be 4:55 pm, 1 hour and 20 minutes after molding. The final setting time was 7:05 pm, 2 hours and 10 minutes after molding. The overall duration of the test was 3 hours and 45 minutes and the water-cement ratio was 0.255.
This document summarizes the results of a test to determine the setting time of hydraulic cement using a Vicat needle. It records the time, trial number, and penetration depth in centimeters of the needle into the cement mold at regular intervals. The initial setting time was determined to be 4:55 pm, 1 hour and 20 minutes after molding. The final setting time was 7:05 pm, 2 hours and 10 minutes after molding. The overall duration of the test was 3 hours and 45 minutes and the water-cement ratio was 0.255.
This document summarizes the results of a test to determine the setting time of hydraulic cement using a Vicat needle. It records the time, trial number, and penetration depth in centimeters of the needle into the cement mold at regular intervals. The initial setting time was determined to be 4:55 pm, 1 hour and 20 minutes after molding. The final setting time was 7:05 pm, 2 hours and 10 minutes after molding. The overall duration of the test was 3 hours and 45 minutes and the water-cement ratio was 0.255.