Professional Documents
Culture Documents
2024
EXTENDED UNTIL
29.02.2024
W E L D I N G TA B L E S A N D C L A M P I N G S Y S T E M S
t Leader
rke
W
ld
el r
di Wo
rapid, low cost and interchangeable ng
Ta b l e
s fro m
the
The front page Zero point clamping system Product overview
product Modify your reused fixtures in a few easy steps with the
Siegmund zero point clamping system. 16 22 28
Welding Table 16 Siegmund Welding Cell
Page 238
Rapid identification of Siegmund quality features
www.siegmund.com
Nitration Aluminum-Titanium
creates scratch-resistant and corrosion-resistant surfaces, lightweight and high-strength material,
protects against weld spatter adhesion in combination with hardness of nitrided cast steel is not achieved
our anti-spatter spray
Scale Polyamide
Find the latest news about Siegmund for precise set-up and clamping of workpieces for stainless steel and aluminum processing
on our social media pages. to prevent surface damage
3
Deggingen (D)
Our Principle Aim: Availability from Stock! Siegmund's unique and specially developed materials
and processes, provide features not generally offered
by other producers.
For many years the Siegmund Group has been successfully designing, producing and distributing
welding and clamping table systems worldwide and are now revered as the world's number one.
From new facilities in Oberottmarshausen and Skawina, the Siegmund Group now has over
70,000 square meters of production and warehousing space.
Delivery lead times are minimised with 18,000 square meters of storage at our
Oberottmarshausen headquarters.
Locations of our group of companies: Oberottmarshausen (D), Deggingen (D), Grossaitingen (D), Skawina (PL), Lublin (PL), Ningbo (CN)
Area for office, production and warehouse approx. 75000 sqm, Operating area 180000 sqm
4 5
Areal Clamping Bolt
Powerful clamping of soft materials
Bolt handle
Clamping range
Bolt body
Fold-out elements
47-53 mm
Fits perfectly in chamfers Variable clamping range (Example: 280590) Different lengths
Further detailed information is available at:
www.siegmund.com/F-areal-clamping-bolt
6 7
Siegmund Welding Cell
A compact modular system
ne w
Benefit from the advantages
of the Siegmund welding cell:
configured and expanded for each specific application
compact design
quick start-up
8 9
Siegmund Welding Cell Vent
A compact modular system • connection available for fume extraction system Roof
• standard 150mm and 200mm spigot diameter
• front hinged access doors
for connection to extraction system
• manual opening for access
• crane access for loading
Profiles
Side wall
Welding Table
LED progress indicator
• working area for robot and fixtures
• signal indicator in green / red • fastening of the zero point clamping
• on the right and left corner profile system with perforated plates and
Zero point clamping system & the new Siegmund clamping system
Perforated Plates Sub Table Box for welding cell • various cells and table sizes available
• compatible with all systems
• Simplified resetting for new fixtures • practical storage space
and perforated plates • safe keeping of the pneumatic device
• Zero point clamping system: Page 22 for the zero point clamping system
Standard model: in stock
• Perforated Plates: Page 20
Special equipment: Delivery time approx. 6 weeks
Further detailed information is available at:
www.siegmund.com/F-cell
10 11
Siegmund Welding Cell
A compact modular system
12 13
Siegmund Welding Cell
A compact modular system
Borehole Ø 16 mm
150 mm
Special table 2000 x 1000 mm
4-160020.RC
Special table 2400 x 1200 mm Benefit from a combination of Siegmund expertise in,
4-160030.RC a welding cell with zero point clamping, perforated plates
and a new clamping system.
Special table 3000 x 1500 mm
4-160040.RC
14 15
Siegmund Welding Cell
A compact modular system
16 17
16 Siegmund Welding Cell Siegmund Welding Cell 16
Configuration of the welding cell
• Double doors with welding screens at the front
• Aluminum composite panels on the sides and back
• Partition wall for division into two working areas Set 1
• Roof with connection possibility for welding fume extraction unit
• LED progress indicator outside
• Installation height inside the cell approx. 1300 mm
10x 160238.10
Welding cell 2000 (100 pieces)
Welding cell 2000 Console upon request
for table size 2000 x 1000 mm (without welding table) 2-0020.RC
mm
00
Set 2
20
Special table 2400 x 1200 mm (Item No. 160030.RC) 2x CS000172 8x CS000181 8x CS160192
Console, ST Box, Bolts, Quick-Change Clamps upon request
2x Perforated plate 1150 x 1000 mm (Item No. 164007.X7) 2-160030.RC2
2x Zero point clamping system Set (Item No. ZP1620)
2x New clamping system Starter set (Item No. CS160001)
2x CS009001 2x CS009002 2x CS009003 2x CS009004
Welding cell 3000 1x Welding Cell
Welding cell 3000 Console upon request 1x Special table
Set 1
Special table 3000 x 1500 mm (Item No. 160040.RC) upon request 2x Pneumatic unit 8x ZP0020 8x ZP1600
2-160040.RC1 pneumatic
Console
Set 2
2x Perforated plate 1x 004401 2x ZP1601 4x ZP1602 2x ZP1603
Special table 3000 x 1500 mm (Item No. 160040.RC) (250 x 250 mm)
Console, ST Box, Bolts, Quick-Change Clamps upon request
2x Perforated plate 1450 x 1150 mm (Item No. 164008.X7) 2-160040.RC2
2x Zero point clamping system Set (Item No. ZP1620) Adaptation of the console to the drilling
pattern of the robot for a surcharge
Double doors for each working area 2x New clamping system Starter set (Item No. CS160001)
upon request
All prices plus assembly and packing and transport costs
2-004401.X Standard model: in stock
Special equipment: Delivery time approx. 6 weeks
Further versions available online:
www.siegmund.com/F-cell Individual adjustment of
the cell height
price on request
18 19
16 Perforated Plates Perforated plates for welding cells 16
Siegmund perforated plates – providing interchangeable
Perforated plate 950 x 800 mm
worktops for ultimate flexibility 95 0 m m
• Borehole Ø 16 mm
• Through-hardened tool steel X8.7 + Plasma nitration
• Material thickness approx. 12 mm upon request
mm
800
• Boreholes in diagonal grid 2-164006.X7
• Borehole Ø 16 mm
• Through-hardened tool steel X8.7 + Plasma nitration
upon request
m
• Material thickness approx. 12 mm
0m
10 0
• Boreholes in diagonal grid 2-164007.X7
• Borehole Ø 16 mm
• Through-hardened tool steel X8.7 + Plasma nitration
• Material thickness approx. 12 mm upon request
mm
• Boreholes in diagonal grid 2-164008.X7
0
115
Special perforated plates for the Siegmund welding cell
More perforated plates online:
www.siegmund.com/F-cell-plates
Some of the perforated plates have recesses for the console of the robot and are therefore optimized for the use
in the Siegmund welding cell. In combination with the zero point clamping system and the new clamping system,
set-up times in automation and series production are reduced.
20 21
Zero point clamping system
Exchange welding fixtures easily and flexibly new
Modify your reused fixtures
in a few easy steps with the Specifications
Siegmund zero point clamping system. • The basis of the system is the Siegmund welding table
• At least 4 clamping modules are required per perforated plate
• The perforated plate is clamped and centered using balls
• Readjustment of the clamped fixture is not necessary
Produce in series
22 23
28 16 Zero point clamping system Zero point clamping system 16 28
Application of bushings
Compensating bushing
centering in one axis
Retaining bushing
clamping and holding function,
2-ZP0010 2-ZP0020
no centering
pneumatic clamping module, release of the clamping bolt using compressed air (approx. 7,5 bar), incl. Universal banjo screw ZP0021
max. holding force Height: (c) Ø: Weight:
2 kN 45 mm 125 mm 3,39 kg
Zero P
oint
2-ZP0022 2-ZP0021
Centering bushing
centering in two axes
Retaining bushing
clamping and holding function,
no centering
24 = Item produced for stock = Item produced on order Explanations see page 3 25
16 Zero point clamping system Zero point clamping system 16
Starter set mechanic
Included in the set
4x ZP0010 Zero point clamping system mechanic
4x ZP1600 Clamping bolt
1x ZP1601 Centering bushing
2x ZP1602 Retaining bushing 4x ZP0010 4x ZP1600
1x ZP1603 Compensating bushing
upon request
instead of upon request 2-ZP1600 2-ZP1601 2-ZP1602 2-ZP1603
4-ZP1610 1x ZP1601 2x ZP1602 1x ZP1603
2-ZP1600 Clamping bolt upon request
for connecting clamping bolts with perforated plate, centering in two axes, incl. fixing material
Height: (c) Ø: Weight:
10 mm 19 mm 0,01 kg
2-ZP1602 Retaining bushing - nitrided upon request
Starter set pneumatic for connecting clamping bolts with perforated plate, clamping and holding function, no centering, incl. fixing material
Height: (c) Ø: Weight:
Included in the set 10 mm 19 mm 0,01 kg
4x ZP0020 Zero point clamping system pneumatic 2-ZP1603 Compensating bushing - nitrided upon request
4x ZP1600 Clamping bolt for connecting clamping bolts with perforated plate, centering in one axis, incl. fixing material
1x ZP1601 Centering bushing Height: (c) Ø: Weight:
2x ZP1602 Retaining bushing 4x ZP0020 4x ZP1600
10 mm 19 mm 0,01 kg
1x ZP1603 Compensating bushing
upon request
instead of upon request
4-ZP1620 1x ZP1601 2x ZP1602 1x ZP1603
120 0 m m
10 0 0 m m
26 = Item produced for stock = Item produced on order Explanations see page 3 27
28 Zero point clamping system Zero point clamping system 28
Starter set mechanic
Included in the set
4x ZP0010 Zero point clamping system mechanic
4x ZP2800 Clamping bolt
1x ZP2801 Centering bushing
2x ZP2802 Retaining bushing 4x ZP0010 4x ZP2800
1x ZP2803 Compensating bushing
upon request
instead of upon request 2-ZP2800 2-ZP2801 2-ZP2802 2-ZP2803
4-ZP2810 1x ZP2801 2x ZP2802 1x ZP2803
2-ZP2800 Clamping bolt upon request
for connecting clamping bolts with perforated plate, centering in two axes, incl. fixing material
Height: (c) Ø: Weight:
13 mm 31 mm 0,06 kg
2-ZP2802 Retaining bushing - nitrided upon request
Starter set pneumatic for connecting clamping bolts with perforated plate, clamping and holding function, no centering, incl. fixing material
Height: (c) Ø: Weight:
Included in the set 13 mm 31 mm 0,06 kg
4x ZP0020 Zero point clamping system pneumatic 2-ZP2803 Compensating bushing - nitrided upon request
4x ZP2800 Clamping bolt for connecting clamping bolts with perforated plate, centering in one axis, incl. fixing material
1x ZP2801 Centering bushing Height: (c) Ø: Weight:
2x ZP2802 Retaining bushing 4x ZP0020 4x ZP2800
13 mm 31 mm 0,06 kg
1x ZP2803 Compensating bushing
upon request
instead of upon request
4-ZP2820 1x ZP2801 2x ZP2802 1x ZP2803
120 0 m m
10 0 0 m m
28 = Item produced for stock = Item produced on order Explanations see page 3 29
New clamping system
For the simple creation of series fixtures with templates
Specifications
• Modular system for maximum flexibility
• For system 16, 22 and 28
Repeated accuracy with less set-up time and • On going development of the product range
higher productivity. Small or large fixtures can • We recommend Siegmund perforated plates,
be quickly built in 1-3 hours. welding tables or slot tables as a basis
Individual height
• Components heights set by aluminum profile length
• Individual height adjustment from cut lengths
• Profiles available in fixed lengths and round bars
Quick-Change Clamp
• Rapid clamping and release
• Ergonomic clamp handle
• Optional versions and sizes
• All with Siegmund hole pattern
Example
Accessories
15x Bolts
Cost example: see page 31
Clamping system
2x Aluminum profile 76 mm, 5x Aluminum profile 101 mm,
1x Aluminum profile 151 mm, 4x Cover plate, 8x Base plate, 86x Screws,
4x Fast Clamping Equipment, 2x Spacer plate
Build fixtures yourself Easy combination with templates Compatibility
Assembly time approx. 2,5 hours
Individual fixtures can be assembled from aluminum Whether parts are from a laser or 3D printer, The fixture system is compatible with
profiles together with various cover and base plates. parts can be attached to the profile in the T-Slot all the Siegmund product range.
Small to large fixtures can be easily and quickly built with square nuts and screws.
at minimum cost.
Further detailed information
is available at:
www.siegmund.com/F-clampingsystem
30 31
New clamping system
For the simple creation of series fixtures with templates
1 2 3
Detailed information on
the product assembly at:
www.siegmund.com/F-clampingsystem
Quick-Change Clamp
Page 36
Example of the finished angle
Define the height of the square Fasten the base plate Insert square nuts
• Cut the aluminum profile to the required length • Fasten aluminum profile using • Insert square nuts in the T-Slot of the Screws M8x16
• Note the minimum height of the cut (Page 35) self tapping screws aluminum profiles Self-tapping screws M8x25
Page 37
• Ensure cut edges are square • When the screws are screwed in, • For fastening customer-side templates
Page 37
• Deburr the profile after sawing a thread is created in the profile (material thickness 5 – 6 mm) or optionally
• Thread cutting is not required also lateral fastening of quick-change
We also offer cut and finished profiles. (Page 35)
with self tapping screws clamps with M8x12 screws
• Maximum torque: 20 Nm
Square nuts M8
Page 35
4 5 6
Screws M8x12
Page 37
• Fasten aluminum profile using • Mount the quick-change clamp directly • Attachment to perforated plate, welding table
self tapping screws on the cover plate or slot table with fast clamping bolts
Base plate
• When the screws are screwed in, • The quick-change clamp can also be • If required, use a M8x12 screw to fasten the
Perforated plate Page 39 / 41 / 43
a thread is created in the profile attached using an adapter customized template to a square nut
• Thread cutting is not required • Fastening of clamps, squares, stops and Page 38 / 40 / 42
with self tapping screws prisms in system 16 boreholes possible
• Maximum torque: 20 Nm
Self-tapping screws M8x25
Page 37
32
New clamping system 16 22 28
CS000181 12 mm
c
CS000181 12 mm
CS000181 12 mm
250 mm
226 mm a
200 mm
176 mm b
CS000181 12 mm
150 mm
126 mm
100 mm
a
d a a a d
d d
b b b
b
34 = Item produced for stock = Item produced on order Explanations see page 3 35
28 22 16 New clamping system New clamping system 16 22 28
220 mm
58 mm
190 mm
45 mm 65 mm
38 mm
30 mm
41 mm
35 mm
40 mm
m m mm mm
68 m 95 m mm m 245 295
mm 151 85 m 110
mm
104
2-CS009082 Vertical clamp 1800 upon request 2-CS009001 Set Self-tapping screws M8x25 pack of 50 upon request
without adapter, Hole pattern 40x20 mm, opening angle: 110° 50 pieces, for connecting base or cover plates with aluminum profile
max. holding force Length: (a) Width: (b) Height: (c) Weight: Weight:
1,8 kN 104 mm 56 mm 190 mm 0,43 kg 1,00 kg
2-CS009084 Vertical clamp 2200 upon request 2-CS009002 Set Screws M8x12 pack of 50 upon request
without adapter, Hole pattern 40x40 mm, opening angle: 105° 50 pieces, for fastening quick-change clamps and templates (material thickness 5 – 6 mm) in the slot
max. holding force Length: (a) Width: (b) Height: (c) Weight: Weight:
2,2 kN 151 mm 58 mm 220 mm 0,70 kg 0,60 kg
2-CS009092 Horizontal clamp 1800 upon request 2-CS009003 Set Screws M8x16 pack of 50 upon request
without adapter, Hole pattern 40x20 mm, with less interference contour compared to vertical clamps, opening angle: 90° 50 pieces, for attaching quick-change clamps to cover plates
max. holding force Length: (a) Width: (b) Height: (c) Weight: Weight:
1,8 kN 245 mm 56 mm - 0,43 kg 0,65 kg
2-CS009094 Horizontal clamp 3000 upon request 2-CS009004 Set Square nuts M8 pack of 50 upon request
without adapter, Hole pattern 40x40 mm, with less interference contour compared to vertical clamps, opening angle: 90° 50 pieces, Sliding blocks for aluminum profiles with T-Slot
max. holding force Length: (a) Width: (b) Height: (c) Weight: Weight:
3 kN 295 mm 58 mm - 0,73 kg 0,35 kg
162 mm
145 mm
m
m 180 m
120 m
m
57 m m
93 m
20 mm
2-CS009083 2-CS009093
40 mm
40 mm
36 = Item produced for stock = Item produced on order Explanations see page 3 37
16 New clamping system New clamping system 16
Starter set 16
Included in the set
4x CS000176 Aluminum profile 100 T 500 mm
4x CS000181 Cover plate 100 nitrided
m
0m
4x CS160192 Base plate 100 radial nitrided
50
1x CS009001 Set Self-tapping screws M8x25 pack of 50 d d d
4-CS160001.1 1x CS009001 1x CS009002 1x CS009003 1x CS009004 radially positionable, for fastening to aluminum profile with self-tapping screw, for borehole spacing 50 mm, stepless rotation by 90°
Length: (a) Width: (b) MS: (d) Weight:
100 mm 100 mm 12 mm 0,57 kg
2-CS160193 Base plate 100 linear left - nitrided upon request
linearly positionable left, for fastening to aluminum profile with self-tapping screw, steplessly movable
Length: (a) Width: (b) MS: (d) Weight:
Perforated plate X8.7 1200x800x12 mm 100 mm 100 mm 12 mm 0,64 kg
The ideal basis for your fixtures. 2-CS160194 Base plate 100 linear right - nitrided upon request
linearly positionable right, for fastening to aluminum profile with self-tapping screw, steplessly movable
Borehole Ø 16 mm Length: (a) Width: (b) MS: (d) Weight:
Through-hardened tool steel X8.7 100 mm 100 mm 12 mm 0,64 kg
+ Plasma nitration MS=Material thickness;
Boreholes 50x50 mm Grid
Material thickness approx. 11,5 – 13 mm
upon request
More perforated plates online:
4-164004.X7 www.siegmund.com/F-plates
Vertical clamp 1800 with Adapter Horizontal Toggle Clamp 2500 with Adapter
Adapter CS160715.4, for system borehole 16 mm Adapter CS160715.4, for system borehole 16 mm CS160715.4 160546.1
4-CS160790 upon request 4-CS160792 upon request CS160715.4 Adapter with Hole Pattern Ø 60 / 15 eccentric - burnished upon request
for Toggle Clamp (Hole pattern 40x20 mm / 40 mm), for system borehole 16 mm
Height: (c) Ø: MS: (d) Weight:
25 mm 60 mm 15 mm 0,36 kg
Horizontal clamp 1800 with Adapter Horizontal Toggle Clamp 4000 with Adapter 160546.1 Clamp Bushing for M8 thread upon request
Adapter CS160715.4, for system borehole 16 mm Adapter CS160715.4, for system borehole 16 mm incl. screw, Remove O-ring to insert screw, for fastening Siegmund parts to the threaded boreholes
Height: (c) Ø: MS: (d) Weight:
4-CS160794 upon request 4-CS160793 upon request 17 mm 23 mm - 0,02 kg
MS=Material thickness;
38 = Item produced for stock = Item produced on order Explanations see page 3 39
22 New clamping system New clamping system 22
Starter set 22
Included in the set
4x CS000176 Aluminum profile 100 T 500 mm
4x CS000181 Cover plate 100 nitrided
m
0m
4x CS220192 Base plate 170 radial nitrided a a a
50
1x CS009001 Set Self-tapping screws M8x25 pack of 50 d d d
4-CS220001.1 1x CS009001 1x CS009002 1x CS009003 1x CS009004 radially positionable, for fastening to aluminum profile with self-tapping screw, for borehole spacing 50 mm / 100 mm, stepless rotation by 90°
Length: (a) Width: (b) MS: (d) Weight:
170 mm 170 mm 18 mm 2,59 kg
2-CS220193 Base plate 170 linear left - nitrided upon request
linearly positionable left, for fastening to aluminum profile with self-tapping screw, steplessly movable
Length: (a) Width: (b) MS: (d) Weight:
Perforated plate S355J2+N 1200x800x18 mm 170 mm 170 mm 18 mm 2,81 kg
The ideal basis for your fixtures. 2-CS220194 Base plate 170 linear right - nitrided upon request
linearly positionable right, for fastening to aluminum profile with self-tapping screw, steplessly movable
Borehole Ø 22 mm Length: (a) Width: (b) MS: (d) Weight:
premium steel S355J2+N 170 mm 170 mm 18 mm 2,81 kg
+ Plasma nitration MS=Material thickness;
Boreholes 100x100 mm Grid
Material thickness approx. 17 – 19 mm
upon request
More perforated plates online:
4-224004.P www.siegmund.com/F-plates
Vertical clamp 1800 with Adapter Vertical clamp 2200 with Adapter
Adapter CS220715.4, for system borehole 22 mm Adapter CS220715.4, for system borehole 22 mm 2-CS220715.4 2-220546.1
4-CS220790 upon request 4-CS220791 upon request 2-CS220715.4 Adapter with Hole Pattern Ø 70 / 15 eccentric - burnished upon request
for Toggle Clamp (Hole pattern 40x20 mm / 40x40 mm / 40 mm), for system borehole 22 mm
Height: (c) Ø: MS: (d) Weight:
25 mm 70 mm 15 mm 0,46 kg
Horizontal clamp 1800 with Adapter Horizontal clamp 3000 with Adapter 2-220546.1 Clamp Bushing for M8 thread upon request
Adapter CS220715.4, for system borehole 22 mm Adapter CS220715.4, for system borehole 22 mm incl. screw, for fastening Siegmund parts to the threaded boreholes
Height: (c) Ø: MS: (d) Weight:
4-CS220794 upon request 4-CS220795 upon request 21 mm 31 mm - 0,05 kg
MS=Material thickness;
Horizontal Toggle Clamp 2500 with Adapter Horizontal Toggle Clamp 4000 with Adapter
Adapter CS220715.4, for system borehole 22 mm Adapter CS220715.4, for system borehole 22 mm
40 = Item produced for stock = Item produced on order Explanations see page 3 41
28 New clamping system New clamping system 28
Starter set 28
Included in the set
4x CS000176 Aluminum profile 100 T 500 mm
4x CS000181 Cover plate 100 nitrided
m
0m
4x CS280192 Base plate 175 radial nitrided a a a
50
2x 800653.1.N Spacer Ring pack of 4 d d d
1x CS009001 Set Self-tapping screws M8x25 pack of 50 4x CS000176 4x CS000181 4x CS280192 2x 800653.1.N
1x CS009002 Set Screws M8x12 pack of 50 b b b
upon request 2-CS280192 Base plate 175 radial - nitrided upon request
instead of upon request 1x CS009001 1x CS009002 1x CS009003 1x CS009004 radially positionable, for fastening to aluminum profile with self-tapping screw, for borehole spacing 50 mm / 100 mm, stepless rotation by 90°, Spacer rings (Item no. 800653.1.N) are required for clamping
4-CS280001.1 Length: (a) Width: (b) Ø: MS: (d) Weight:
175 mm 175 mm - 15 mm 2,06 kg
2-CS280193 Base plate 175 linear left - nitrided upon request
linearly positionable left, for fastening to aluminum profile with self-tapping screw, steplessly movable, Spacer rings (Item no. 800653.1.N) are required for clamping
Length: (a) Width: (b) Ø: MS: (d) Weight:
175 mm 175 mm - 15 mm 2,23 kg
Perforated plate Premium Light 1200x800x15 mm 2-CS280194 Base plate 175 linear right - nitrided upon request
The ideal basis for your fixtures. linearly positionable right, for fastening to aluminum profile with self-tapping screw, steplessly movable, Spacer rings (Item no. 800653.1.N) are required for clamping
Length: (a) Width: (b) Ø: MS: (d) Weight:
Borehole Ø 28 mm 175 mm 175 mm - 15 mm 2,23 kg
Through-hardened tool steel X8.7 2-800653.1.N Spacer Ring for Premium Light pack of 4 - nitrided upon request
+ Plasma nitration
distance between two clamping elements, is required for clamping to material thickness 15 mm with bolt 280511, Scope of delivery: 4 pieces
Boreholes 100x100 mm Grid
Material thickness approx. 15 mm Length: (a) Width: (b) Ø: MS: (d) Weight:
- - 40 mm 10 mm 0,04 kg
MS=Material thickness;
upon request
More perforated plates online:
4-804004.X7 www.siegmund.com/F-plates
d
Fast Clamping Equipment with Adapter d
c
c
Vertical clamp 1800 with Adapter Vertical clamp 2200 with Adapter
Adapter CS280715.4, for system borehole 28 mm Adapter CS280715.4, for system borehole 28 mm 2-CS280715.4 2-CS280715.5 2-280546.5
4-CS280790 upon request 4-CS280791 upon request 2-CS280715.4 Adapter with Hole Pattern Ø 70 / 15 eccentric - burnished upon request
for Toggle Clamp (Hole pattern 40x20 mm / 40x40 mm / 40 mm), for system borehole 28 mm
Height: (c) Ø: MS: (d) Weight:
30 mm 70 mm 15 mm 0,48 kg
Horizontal clamp 1800 with Adapter Horizontal clamp 3000 with Adapter 2-CS280715.5 Adapter with Hole Pattern Ø 70 / 40 eccentric - burnished upon request
Adapter CS280715.4, for system borehole 28 mm Adapter CS280715.4, for system borehole 28 mm for Toggle Clamp (Hole pattern 40x20 mm / 40x40 mm / 40 mm), for system borehole 28 mm
Height: (c) Ø: MS: (d) Weight:
4-CS280794 upon request 4-CS280795 upon request 55 mm 70 mm 40 mm 1,20 kg
2-280546.5 Clamp Bushing for M8 thread incl. screw 16 mm upon request
42 = Item produced for stock = Item produced on order Explanations see page 3 43
Materials
The right working basis for every application
The materials used are fundamental to the Steel S355J2+N Steel S355J2+N Tool Steel X8.7 Tool Steel X8.8
high level of hardness and long service life. (without Plasma nitration) + Plasma nitration + Plasma nitration + Plasma nitration
BAR-Coating BAR-Coating BAR-Coating
Iron nitride Iron nitride Iron nitride
Transient region Transient region Transient region
Siegmund welding tables and perforated plates System 28 Basic 750 System 16 Basic 750 System 16 Extreme 8.7 + Extreme 8.7 PLUS System 28 Extreme 8.8 PLUS
Table side panel made of high quality steel S355J2+N + Plasma nitration
System 16 Professional 750 System 16 Perforated Plates
System 22 Professional 750 System 22 Extreme 8.7 + Extreme 8.7 PLUS
System 22 Perforated Plates System 28 Basic 8.7
System 28 Professional 750 System 28 Extreme 8.7
System 28 Hexagon Slot Table
System 28 Perforated Plates Premium Light
Comparison of hardness Table side panel made of high quality steel S355J2+N + Plasma nitration
44 45
16 Welding Tables
Ø 16 mm
Welding Tables 16
For fine detail applications
System 16 BASIC System 16 PROFESSIONAL 750 System 16 EXTREME 8.7 System 16 EXTREME 8.7 PLUS
Material Material Material Material
• Basic 750: • Professional 750: • Professional Extreme 8.7: • Professional Extreme 8.7 PLUS:
premium steel S355J2+N + Plasma nitration premium steel S355J2+N + Plasma nitration Through-hardened tool steel X8.7 + Plasma nitration Through-hardened tool steel X8.7 + Plasma nitration
• Material thickness approx. 11,5 – 13 mm • Material thickness approx. 11,5 – 13 mm • Material thickness approx. 11,5 – 13 mm • Material thickness approx. 11,5 – 13 mm
• Table side panel made of high quality steel S355J2+N + Plasma nitration • Table side panel made of high quality steel S355J2+N + Plasma nitration
Welding Tables
Ø 16 mm System 16 Basic
Borehole Ø 16 mm
Boreholes on the surface 50x50 mm grid Basic 750
The economical solution Welding table including accessories:
Height of table side 50 mm
Borehole spacing of table side 50 mm 1200 x 800 x 50 mm
Basic Material thickness approx. 11,5 – 13 mm
Maximum recommended static total load with 4 legs 1000 kg based on even load distribution. (Data only for leg standard equipment)
Weight = Table + Pallet + Leg standard equipment
With plasma nitration: Well protected against rust, scratches and weld spatter. Sub Table Box
Compatibility: All accessories of Siegmund System 16 are compatible with Basic 16. lockable,
incl. 2 drawers and
suitable mounting.
180 mm
180 mm 1x 161025.P
2-161990.1
115 mm
80 mm
Caster, locking brake
Height adjustable
Floor anchoring
300 mm
Table Legs
40 mm
Item No. 161856 4-160877.XX 4-161855.XX 4-160879.XX 4-160874.XX
4x 160109.N 2x 160162.N 1x 163999
Capacity per table leg 1000 kg 1000 kg 200 kg 200 kg 1000 kg
Working height 850 mm 600 – 1000 mm 850 mm 650 – 950 mm 850 mm
Fine adjustment 50 mm 40 mm 30 mm 30 mm 50 mm
Surcharge per leg included upon request upon request upon request upon request
Note for castor: Because of risk of tipping not permitted for 1200 x 800 mm tables.
35 – 125 mm
300 mm
115 mm
200 mm
90 mm
25 mm
53 mm
Sets
Clamp Bolt Stop Square Square Square Accessories-Set
Material burnished / nitrided burnished nitrided nitrided nitrided nitrided for free
Item No. 160610 160511 160420.N 160108.N 160110.N 160162.N 163999
Basic-Set 1: 4-161200 4x 12 x 8x 4x 2x 1x upon request
Basic-Set 2: 4-161300 8x 16 x 10 x 4x 4x 2x 1x upon request
Welding Tables
Ø 16 mm System 16
Borehole Ø 16 mm
Professional 750
For fine detail applications Boreholes on the surface 50x50 mm grid
Welding table including accessories:
Height of table side 100 mm
Borehole spacing of table side 25 mm 1500 x 1000 x 100 mm
PROFESSIONAL 750 Material thickness approx. 11,5 – 13 mm
180 mm
2-160990.1
115 mm
40 mm
Caster, locking brake
Standard equipment
Height adjustable
Floor anchoring
16x 160511 4x 160420.N 2x 160109.N
Table Legs
500 mm
90 mm
Item No. 160858.X 160857.X 4-160877.XX 4-160876.XX 4-160879.XX 4-160875.XX
Capacity per table leg 1000 kg 1000 kg 1000 kg 200 kg 200 kg 1000 kg
Working height 850 mm 950 mm 650 – 1050 mm 850 mm 700 – 1000 mm 850 mm 6x 160110.N 2x 160164.N 1x 163999
Fine adjustment 40 mm 40 mm 40 mm 30 mm 30 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 table legs.
750 mm
560 mm
500 mm
35 – 125 mm
680 mm
360° 250 mm
300 mm
115 mm
200 mm
90° / 120°
200 mm
90 mm
80 mm
25 mm
53 mm
Sets
Clamp Clamp Prism Bolt Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material burnished / nitrided burnished nitrided burnished nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 160610 160630 160645.1.N 160511 160410.N 160420.N 160108.N 160110.N 160162.N 160161+63.N 160134+36.N 160146+48.N 160910 163999
Set 1: 4-163100 4x 12 x 4x 4x 4x 1x upon request
Set 2: 4-163200 6x 2x 4x 18 x 4x 6x 6x 6x 2x 1x upon request
Set 3: 4-163300 8x 4x 4x 24 x 4x 8x 8x 8x 2x 1x+1x 1x upon request
Set 4: 4-163400 10 x 4x 8x 30 x 8x 10 x 10 x 10 x 4x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-163500 12 x 6x 8x 36 x 8x 12 x 12 x 12 x 4x 1x+1x 1x+1x 1x+1x 1x 1x upon request
Welding Tables
Ø 16 mm System 16
Borehole Ø 16 mm
Boreholes on the surface 50x50 mm grid Professional Extreme 8.7
For fine detail applications Welding table including accessories:
Height of table side 100 mm
Boreholes on table sides in diagonal grid 2000 x 1000 x 100 mm
EXTREME 8.7 Material thickness approx. 11,5 – 13 mm
80 mm
Caster, locking brake
Standard equipment
Height adjustable
Floor anchoring
6x 160610 4x 160630 16x 160511 4x 160410.N
250 mm
Table Legs
90 mm
Item No. 160858.X 160857.X 4-160877.XX 4-160876.XX 4-160879.XX 4-160875.XX
4x 160110.N 1x 160161.N 1x 163999
Capacity per table leg 1000 kg 1000 kg 1000 kg 200 kg 200 kg 1000 kg 1x 160163.N
Working height 850 mm 950 mm 650 – 1050 mm 850 mm 700 – 1000 mm 850 mm
Fine adjustment 40 mm 40 mm 40 mm 30 mm 30 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request
Note for castor: Not recommended for welding tables with 6 or 8 table legs. Because of risk of tipping not recommended for 1000 x 500 mm and 1200 x 800 mm.
750 mm
560 mm
500 mm
35 – 125 mm
680 mm
360° 250 mm
300 mm
115 mm
200 mm
90° / 120°
200 mm
90 mm
80 mm
25 mm
53 mm
Sets
Clamp Clamp Prism Bolt Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material burnished / nitrided burnished nitrided burnished nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 160610 160630 160645.1.N 160511 160410.N 160420.N 160108.N 160110.N 160162.N 160161+63.N 160134+36.N 160146+48.N 160910 163999
Set 1: 4-163100 4x 12 x 4x 4x 4x 1x upon request
Set 2: 4-163200 6x 2x 4x 18 x 4x 6x 6x 6x 2x 1x upon request
Set 3: 4-163300 8x 4x 4x 24 x 4x 8x 8x 8x 2x 1x+1x 1x upon request
Set 4: 4-163400 10 x 4x 8x 30 x 8x 10 x 10 x 10 x 4x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-163500 12 x 6x 8x 36 x 8x 12 x 12 x 12 x 4x 1x+1x 1x+1x 1x+1x 1x 1x upon request
Welding Tables
Ø 16 mm Borehole Ø 16 mm System 16
Boreholes on the surface 50x50 mm grid
Professional Extreme 8.7 PLUS
For fine detail applications Height of table side 150 mm
Welding table including accessories:
Boreholes on table side 3 rows with 25 mm spacing,
2 rows with 50 mm spacing 2400 x 1200 x 150 mm
EXTREME 8.7 PLUS Material thickness approx. 11,5 – 13 mm
Standard equipment
Height adjustable
Floor anchoring
6x 160610 4x 160630 18x 160511 4x 160513
750 mm
Table Legs
115 mm
90 mm
Item No. 160853.X 160857.X 4-160877.XX 4-160860.XX 4-160879.XX 4-160872.XX
Capacity per table leg 1000 kg 1000 kg 1000 kg 200 kg 200 kg 1000 kg
4x 160420.N 4x 160110.N 1x 160146.N 1x 163999
Working height 850 mm 1000 mm 700 – 1100 mm 850 mm 750 – 1050 mm 850 mm 1x 160148.N
Fine adjustment 40 mm 40 mm 40 mm 30 mm 30 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
750 mm
560 mm
500 mm
35 – 125 mm
680 mm
360° 250 mm
300 mm
115 mm
200 mm
90° / 120°
200 mm
90 mm
80 mm
25 mm
53 mm
Sets
Clamp Clamp Prism Bolt Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material burnished / nitrided burnished nitrided burnished nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 160610 160630 160645.1.N 160511 160410.N 160420.N 160108.N 160110.N 160162.N 160161+63.N 160134+36.N 160146+48.N 160910 163999
Set 1: 4-163100 4x 12 x 4x 4x 4x 1x upon request
Set 2: 4-163200 6x 2x 4x 18 x 4x 6x 6x 6x 2x 1x upon request
Set 3: 4-163300 8x 4x 4x 24 x 4x 8x 8x 8x 2x 1x+1x 1x upon request
Set 4: 4-163400 10 x 4x 8x 30 x 8x 10 x 10 x 10 x 4x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-163500 12 x 6x 8x 36 x 8x 12 x 12 x 12 x 4x 1x+1x 1x+1x 1x+1x 1x 1x upon request
More stable than system 16, more cost-effective than system 28 Your advantage with a Siegmund
welding and clamping table:
No welding distortion
100% repeatability
Highly resilient
System 22 PROFESSIONAL 750 System 22 EXTREME 8.7 System 22 EXTREME 8.7 PLUS
Material Material Material
• Professional 750: • Professional Extreme 8.7: • Professional Extreme 8.7 PLUS:
premium steel S355J2+N + Plasma nitration Through-hardened tool steel X8.7 + Plasma nitration Through-hardened tool steel X8.7 + Plasma nitration
• Material thickness approx. 17 – 19 mm • Material thickness approx. 17 – 19 mm • Material thickness approx. 17 – 19 mm
• Table side panel made of high quality steel S355J2+N + Plasma nitration • Table side panel made of high quality steel S355J2+N + Plasma nitration
Welding Tables Ø 22 mm
System 22
Borehole Ø 22 mm
Professional 750
More stable than system 16, more cost-effective than system 28 Boreholes on the surface 100x100 mm grid
Welding table including accessories:
Height of table side 150 mm
Borehole spacing of table side 50 mm 1500 x 1000 x 150 mm
System 22 PROFESSIONAL 750 Material thickness approx. 17 – 19 mm
upon request
with Plasma nitration + BAR-Coating
300 mm
225 mm
150 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
24x 220511 4x 220410.N 4x 220420.N 4x 220426.N
Table Legs
500 mm
500 mm
175 mm
Item No. 220858 220857.X 4-220878.XX 4-220877.XX 4-220866.XX 4-220879.XX 4-220874.XX
Capacity per table leg 1500 kg 1500 kg 1000 kg 1000 kg 800 kg 800 kg 1500 kg
Working height 850 mm 950 mm 650 – 950 mm 700 – 1050 mm 850 mm 750 – 1000 mm 850 mm 2x 220430.N 4x 220110.N 2x 220162.N 1x 223999
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 table legs.
900 mm
800 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
300 mm
225 mm
90° / 120°
175 mm
150 mm
81 mm
60 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Stop Square Square Square Square Rotation Angle Square Tool Cart Accessories-Set
Material burnished / nitrided nitrided burnished burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 220610.1 220630.1 220645.1 220511 220740 220410.N 220420.N 220426.N 220430.N 220110.N 220152.N 220116.N 220162.N 220164+65.N 220144+46.N 220910 223999
Set 1: 4-223100 4x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-223200 6x 4x 4x 18 x 4x 6x 6x 2x 4x 2x 1x upon request
Set 3: 4-223300 10 x 6x 4x 24 x 4x 8x 8x 2x 6x 2x 1x upon request
Set 4: 4-223400 12 x 8x 8x 30 x 8x 10 x 10 x 2x 2x 8x 2x 2x 1x+1x 1x 1x upon request
Set 5: 4-223500 14 x 10 x 8x 30 x 8x 12 x 12 x 4x 4x 10 x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Welding Tables Ø 22 mm
System 22
Borehole Ø 22 mm
Professional Extreme 8.7
More stable than system 16, more cost-effective than system 28 Boreholes on the surface in diagonal grid
Welding table including accessories:
Height of table side 150 mm
Borehole spacing of table side 50 mm 2400 x 1200 x 150 mm
System 22 EXTREME 8.7 Material thickness approx. 17 – 19 mm
upon request
with Plasma nitration + BAR-Coating
150 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
6x 220610.1 4x 220630.1 24x 220511 6x 220410.N
Table Legs
500 mm
300 mm
175 mm
Item No. 220858 220857.X 4-220878.XX 4-220877.XX 4-220866.XX 4-220879.XX 4-220874.XX
4x 220426.N 4x 220430.N 6x 220110.N 1x 223999
Capacity per table leg 1500 kg 1500 kg 1000 kg 1000 kg 800 kg 800 kg 1500 kg
Working height 850 mm 950 mm 650 – 950 mm 700 – 1050 mm 850 mm 750 – 1000 mm 850 mm
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
900 mm
800 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
300 mm
225 mm
90° / 120°
175 mm
150 mm
81 mm
60 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Stop Square Square Square Square Rotation Angle Square Tool Cart Accessories-Set
Material burnished / nitrided nitrided burnished burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 220610.1 220630.1 220645.1 220511 220740 220410.N 220420.N 220426.N 220430.N 220110.N 220152.N 220116.N 220162.N 220164+65.N 220144+46.N 220910 223999
Set 1: 4-223100 4x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-223200 6x 4x 4x 18 x 4x 6x 6x 2x 4x 2x 1x upon request
Set 3: 4-223300 10 x 6x 4x 24 x 4x 8x 8x 2x 6x 2x 1x upon request
Set 4: 4-223400 12 x 8x 8x 30 x 8x 10 x 10 x 2x 2x 8x 2x 2x 1x+1x 1x 1x upon request
Set 5: 4-223500 14 x 10 x 8x 30 x 8x 12 x 12 x 4x 4x 10 x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Welding Tables Ø 22 mm
Borehole Ø 22 mm
System 22
Boreholes on the surface in diagonal grid Professional Extreme 8.7 PLUS
More stable than system 16, more cost-effective than system 28 Height of table side 250 mm Welding table including accessories:
Boreholes on table side 4 rows with 50 mm spacing 2000 x 1000 x 250 mm
Material thickness approx. 17 – 19 mm
EXTREME 8.7 PLUS
with Plasma nitration + BAR-Coating
www.siegmund.com/F-tableX722plus 2-222990.1
1x 222990.1 2x AR22024080.VL 2x AR22014100.VL
300 mm
225 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
500 mm
Table Legs
500 mm
175 mm
Item No. 220853.X 220857.X 4-220878.XX 4-220877.XX 4-220860.XX 4-220879.XX 4-220872.XX
Capacity per table leg 1500 kg 1500 kg 1000 kg 1000 kg 800 kg 800 kg 1500 kg 4x 220430.N 8x 220110.N 1x 220164.N 1x 223999
Working height 850 mm 1050 mm 750 – 1050 mm 800 – 1150 mm 850 mm 850 – 1100 mm 850 mm 1x 220165.N
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
900 mm
800 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
300 mm
225 mm
90° / 120°
175 mm
150 mm
81 mm
60 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Stop Square Square Square Square Rotation Angle Square Tool Cart Accessories-Set
Material burnished / nitrided nitrided burnished burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 220610.1 220630.1 220645.1 220511 220740 220410.N 220420.N 220426.N 220430.N 220110.N 220152.N 220116.N 220162.N 220164+65.N 220144+46.N 220910 223999
Set 1: 4-223100 4x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-223200 6x 4x 4x 18 x 4x 6x 6x 2x 4x 2x 1x upon request
Set 3: 4-223300 10 x 6x 4x 24 x 4x 8x 8x 2x 6x 2x 1x upon request
Set 4: 4-223400 12 x 8x 8x 30 x 8x 10 x 10 x 2x 2x 8x 2x 2x 1x+1x 1x 1x upon request
Set 5: 4-223500 14 x 10 x 8x 30 x 8x 12 x 12 x 4x 4x 10 x 2x 2x 1x+1x 1x+1x 1x 1x upon request
System 28 BASIC System 28 PROFESSIONAL 750 System 28 EXTREME 8.7 System 28 EXTREME 8.8 PLUS
Material Material Material Material
• Basic 750: • Professional 750: • Professional Extreme 8.7: • Professional Extreme 8.8 PLUS:
premium steel S355J2+N premium steel S355J2+N + Plasma nitration Through-hardened tool steel X8.7 + Plasma nitration Through-hardened tool steel X8.8 + Plasma nitration
• Basic 8.7: • Material thickness approx. 24,5 – 27 mm • Material thickness approx. 24,5 – 27 mm • Material thickness approx. 24,5 – 27 mm
Through-hardened tool steel X8.7 + Plasma nitration • Table side panel made of high quality steel S355J2+N + Plasma nitration • Table side panel made of high quality steel S355J2+N + Plasma nitration
• Material thickness approx. 24,5 – 27 mm
upon request
Basic 8.7: with Plasma nitration + BAR-Coating
150 mm
4x 280610.N 2x 280630.N 12x 280511 2x 280410.N
Caster, locking brake
Height adjustable
Floor anchoring
Table Legs
500 mm
225 mm
75 mm
Item No. 161856 4-160877.XX 4-161855.XX 4-160879.XX 4-160874.XX
Capacity per table leg 1000 kg 1000 kg 200 kg 200 kg 1000 kg 2x 280420.N 4x 280109.N 2x 280162.N 1x 283999
Working height 850 mm 600 – 1000 mm 850 mm 650 – 950 mm 850 mm
Fine adjustment 50 mm 40 mm 30 mm 30 mm 50 mm
Surcharge per leg included upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 table legs.
±42° 500 mm
Side stops
225 mm
175 mm
250 mm
78 mm
95 mm
65 – 220 mm
38 mm
Sets
Clamp Bolt Stop Square Square Threaded Bolt Stop Accessories-Set
Material burnished / nitrided burnished nitrided nitrided nitrided burnished Galvanized for free
Item No. 280604 280511 280420.N 280110.N 280162.N 280543 160415 283999
Basic-Set 1: 4-281200 4x 8x 6x 2x 8x 8x 1x upon request
Basic-Set 2: 4-281300 8x 12 x 8x 4x 8x 8x 1x upon request
Basic-Set 3: 4-281400 10 x 18 x 10 x 6x 4x 8x 8x 1x upon request
500 mm
225 mm
All tables are available on order without plasma nitriding or with a diagonal grid:
75 mm
www.siegmund.com/F-table75028
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
175 mm
Table Legs
900 mm
50 – 165 mm 800 mm
750 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
225 mm
135°
300 mm
175 mm
150 mm
95 mm
68 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material nitrided nitrided nitrided burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 280610.N 280630.N 280648.1.N 280511 280740 280410.N 280420.N 280430.N 280110.N 280152.N 280162.N 280164+65.N 280166+67.N 280144+46.N 280910 283999
Set 1: 4-283100 4x 2x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-283200 6x 4x 4x 18 x 4x 6x 6x 4x 2x 2x 1x upon request
Set 3: 4-283300 10 x 6x 4x 24 x 4x 8x 8x 6x 2x 2x 1x+1x 1x upon request
Set 4: 4-283400 14 x 10 x 6x 30 x 8x 10 x 10 x 4x 8x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-283500 14 x 10 x 8x 36 x 8x 12 x 12 x 4x 12 x 2x 2x 1x+1x 1x+1x 1x+1x 1x 1x upon request
150 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
12x 280610.N 6x 280630.N 12x 280410.N
Table Legs
225 mm
175 mm
Item No. 280858.X 280857.X 4-280878.XX 4-280877.XX 4-280876.XX 4-280879.XX 4-280874.XX
Capacity per table leg 2000 kg 2000 kg 2000 kg 2000 kg 800 kg 800 kg 2000 kg 4x 280420.N 12x 280110.N 1x 283999
Working height 850 mm 950 mm 650 – 900 mm 750 – 1100 mm 850 mm 750 – 950 mm 850 mm
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
900 mm
50 – 165 mm 800 mm
750 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
225 mm
135°
300 mm
175 mm
150 mm
95 mm
68 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material nitrided nitrided nitrided burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 280610.N 280630.N 280648.1.N 280511 280740 280410.N 280420.N 280430.N 280110.N 280152.N 280162.N 280164+65.N 280166+67.N 280144+46.N 280910 283999
Set 1: 4-283100 4x 2x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-283200 6x 4x 4x 18 x 4x 6x 6x 4x 2x 2x 1x upon request
Set 3: 4-283300 10 x 6x 4x 24 x 4x 8x 8x 6x 2x 2x 1x+1x 1x upon request
Set 4: 4-283400 14 x 10 x 6x 30 x 8x 10 x 10 x 4x 8x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-283500 14 x 10 x 8x 36 x 8x 12 x 12 x 4x 12 x 2x 2x 1x+1x 1x+1x 1x+1x 1x 1x upon request
225 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
1x 280990.1 8x 280610.N 4x 280630.N 4x 280420.N
600 mm
Table Legs
500 mm
Item No. 280853.X 280857.X 4-280878.XX 4-280877.XX 4-280860.XX 4-280879.XX 4-280872.XX
175 mm
Capacity per table leg 3000 kg 2000 kg 2000 kg 2000 kg 800 kg 800 kg 3000 kg
Working height 850 mm 1050 mm 750 – 1000 mm 850 – 1200 mm 850 mm 850 – 1050 mm 850 mm 2x 280134.N
2x 280430.N 6x 280110.N 1x 283999
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm 2x 280136.N
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
900 mm
50 – 165 mm 800 mm
750 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
225 mm
135°
300 mm
175 mm
150 mm
95 mm
68 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material nitrided nitrided nitrided burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 280610.N 280630.N 280648.1.N 280511 280740 280410.N 280420.N 280430.N 280110.N 280152.N 280162.N 280164+65.N 280166+67.N 280144+46.N 280910 283999
Set 1: 4-283100 4x 2x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-283200 6x 4x 4x 18 x 4x 6x 6x 4x 2x 2x 1x upon request
Set 3: 4-283300 10 x 6x 4x 24 x 4x 8x 8x 6x 2x 2x 1x+1x 1x upon request
Set 4: 4-283400 14 x 10 x 6x 30 x 8x 10 x 10 x 4x 8x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-283500 14 x 10 x 8x 36 x 8x 12 x 12 x 4x 12 x 2x 2x 1x+1x 1x+1x 1x+1x 1x 1x upon request
Material
• Professional Extreme 8.7:
Through-hardened tool steel X8.7 + Plasma nitration
• Material thickness approx. 24,5 – 27 mm
• Table side panel made of high quality steel S355J2+N + Plasma nitration 2-HN280547 2-HN280547.1 2-HN280547.2
HN280547
incl. screw, for combining screw clamps with hexagon sliding blocks
Height: (c) Ø: Weight:
44 mm 45 mm 0,34 kg
280546.4 2-280546.4 Clamp Bushing for M12 thread incl. screw 50 mm - burnished upon request
incl. screw, especially for fastening Siegmund parts with hexagon sliding blocks
Height: (c) Ø: Weight:
28 mm 40 mm 0,14 kg
4-HN283999 Accessory set Hexagon Slot Table upon request
Free with every Hexagon Slot Table, delivery contents: 4x HN280547, 4x 280546.4
Height: (c) Ø: Weight:
HN280547.1 - - 0,80 kg
HN280602
74 = Item produced for stock = Item produced on order Explanations see page 3 75
28 offer
special
225 mm
Caster, locking brake
Standard equipment
Height adjustable
Height adjustable
Floor anchoring
500 mm
Table Legs
500 mm
175 mm
Item No. 280858.X 280857.X 4-280878.XX 4-280877.XX 4-280876.XX 4-280879.XX 4-280874.XX
Capacity per table leg 2000 kg 2000 kg 2000 kg 2000 kg 800 kg 800 kg 2000 kg 2x 280430.N 4x 280110.N 1x 280164.N 1x 283999
Working height 850 mm 950 mm 650 – 900 mm 750 – 1100 mm 850 mm 750 – 950 mm 850 mm 1x 280165.N
Fine adjustment 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 50 mm
Surcharge per leg included Alternatively upon request upon request upon request upon request upon request
Note castor: Not recommended for welding tables with 6 or 8 table legs.
900 mm
50 – 165 mm 800 mm
750 mm
500 mm
1020 mm
360°
500 mm
500 mm
300 mm
300 mm
225 mm
135°
300 mm
175 mm
150 mm
95 mm
68 mm
Sets
Clamp Clamp Prism Bolt Magnetic Bolt Stop Stop Stop Square Square Square Rotation Angle Square Square Tool Cart Accessories-Set
Material nitrided nitrided nitrided burnished Aluminum nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided nitrided for free
Item No. 280610.N 280630.N 280648.1.N 280511 280740 280410.N 280420.N 280430.N 280110.N 280152.N 280162.N 280164+65.N 280166+67.N 280144+46.N 280910 283999
Set 1: 4-283100 4x 2x 2x 12 x 4x 4x 2x 2x 1x upon request
Set 2: 4-283200 6x 4x 4x 18 x 4x 6x 6x 4x 2x 2x 1x upon request
Set 3: 4-283300 10 x 6x 4x 24 x 4x 8x 8x 6x 2x 2x 1x+1x 1x upon request
Set 4: 4-283400 14 x 10 x 6x 30 x 8x 10 x 10 x 4x 8x 2x 2x 1x+1x 1x+1x 1x 1x upon request
Set 5: 4-283500 14 x 10 x 8x 36 x 8x 12 x 12 x 4x 12 x 2x 2x 1x+1x 1x+1x 1x+1x 1x 1x upon request
The height adjustable rotating table allows easy access 1000 x 1000 mm upon request upon request
Perforated plate
around all sides of the workpiece. For quick and easy approx. 90 kg 2-DS164024.X7 2-DM164024.X7
Through-hardened tool steel X8.7
grounding without twisting the cable, we recommend
+ Plasma nitration 1200 x 800 mm upon request upon request
our magnetic ground connection. Boreholes 50x50 mm Grid approx. 88 kg 2-DS164004.X7 2-DM164004.X7
Material thickness approx. 11,5 – 13 mm
1200 x 1200 mm upon request upon request
approx. 130 kg 2-DS164034.X7 2-DM164034.X7
Versions –
static or portable Perforated plate round
Through-hardened tool steel X8.7
The basic frame "static" comes with sturdy base plates for
+ Plasma nitration Ø 1000 mm upon request upon request
a secure stand. The basic frame "portable" comes with Boreholes 50x50 mm Grid approx. 72 kg 2-DS164210.X7 2-DM164210.X7
sturdy castors with locking brakes. The steel construction Material thickness approx. 11,5 – 13 mm
is powder-coated and is delivered pre-assembled.
Working height between 780 mm and 1100 mm = Item produced for stock
= Item produced on order
Due to the danger of tipping, we exclusively recommend the sizes shown.
With plasma nitration:
Well protected against rust, scratches and weld spatter.
00003399
Fine adjustment
78 79
22 Rotating table height adjustable Rotating table height adjustable 28
Quick and easy adjustment for an ideal working height
Perforated plate Basic table top 1000 x 1000 mm upon request upon request
1000 x 1000 mm upon request upon request approx. 175 kg 2-DS281010.XD7 2-DM281010.XD7
premium steel S355J2+N approx. 137 kg 2-DS224024.PD 2-DM224024.PD Through-hardened tool steel X8.7
+ Plasma nitration + Plasma nitration 1200 x 800 mm upon request upon request
Boreholes Diagonal grid Boreholes Diagonal grid approx. 168 kg 2-DS281025.XD7 2-DM281025.XD7
Material thickness approx. 17 – 19 mm 1200 x 1200 mm upon request upon request Material thickness approx. 24,5 – 27 mm
approx. 197 kg 2-DS224034.PD 2-DM224034.PD 1200 x 1200 mm upon request upon request
approx. 251 kg 2-DS281015.XD7 2-DM281015.XD7
Magnetic ground connection for rotating table Premium Light 1 Perforated plate round
quick and easy grounding Through-hardened tool steel X8.7
no cable twisting upon request upon request + Plasma nitration Ø 1100 mm upon request upon request
high holding force on clean and smooth surfaces 2-00003399 2-00003399 Boreholes Diagonal grid approx. 103 kg 2-DS804211.XD7 2-DM804211.XD7
delivery contents: Adapter plate and countersunk-head screw Material thickness approx. 15 mm
Working height between 780 mm and 1100 mm = Item produced for stock Magnetic ground connection for rotating table
= Item produced on order
Due to the danger of tipping, we exclusively recommend the sizes shown. quick and easy grounding
With plasma nitration: no cable twisting upon request upon request
Well protected against rust, scratches and weld spatter.
high holding force on clean and smooth surfaces 2-00003399 2-00003399
delivery contents: Adapter plate and countersunk-head screw
Working height between 780 mm and 1100 mm = Item produced for stock
= Item produced on order
Due to the danger of tipping, we exclusively recommend the sizes shown.
With plasma nitration:
1
For clamping with 280511 bolts a Spacer Ring 800653.1.N is required. Well protected against rust, scratches and weld spatter.
80 81
28 22 16 Mobile lifting table Mobile lifting table 16
The Siegmund mobile lifting table offers ultimate flexibility in
all applications for clamping, assembly or increasing work space.
Working height from approx. 700 to 1000 mm = Item produced for stock
= Item produced on order
The mobile lifting 500 kg table is only compatible with these worktops (special attachment points in the worktop
With plasma nitration:
are required). With the mobile lifting table 1000 kg, the plates can be attached via the system boreholes.
Well protected against rust, scratches and weld spatter.
*Maximum load capacity: Basic frame (without plate)
Dimensions (L x W):
approx. 1490 x 990 mm,
500 kg* 1000 kg* 1200 kg* 1700 kg* Boreholes surface Ø 16 mm Weight (without plate):
approx. 210 kg
Protective plate below the worktop Professional Extreme 8.7 table top
Through-hardened tool steel X8.7
+ Plasma nitration 1500 x 1000 mm upon request
Fine adjustment Boreholes 50x50 mm Grid 2-HS160035.X7D
approx. 203 kg
Material thickness approx. 11,5 – 13 mm
Height of table side 100 mm
Working height from approx. 700 to 1000 mm = Item produced for stock Premium Light 1 Perforated plate
= Item produced on order 1500 x 1000 mm upon request upon request
The mobile lifting 500 kg table is only compatible with these worktops (special attachment points in the worktop Through-hardened tool steel X8.7 approx. 162 kg 2-HT804014.XD7 2-HS804014.XD7
are required). With the mobile lifting table 1000 kg, the plates can be attached via the system boreholes. With plasma nitration: + Plasma nitration
Well protected against rust, scratches and weld spatter. Boreholes Diagonal grid
Material thickness approx. 15 mm 2000 x 1000 mm upon request
approx. 217 kg incompatible 2-HS804044.XD7
Working height from approx. 700 to 1000 mm = Item produced for stock
= Item produced on order
The mobile lifting 500 kg table is only compatible with these worktops (special attachment points in the worktop
are required). With the mobile lifting table 1000 kg, the plates can be attached via the system boreholes. With plasma nitration:
Mobile lifting table Well protected against rust, scratches and weld spatter.
1200 kg
1
For clamping with 280511 bolts a Spacer Ring 800653.1.N is required.
Dimensions (L x W):
approx. 1490 x 990 mm,
Boreholes surface Ø 22 mm Weight (without plate):
approx. 210 kg
Supplementary set, load-bearing capacity 1700 kg Professional Extreme 8.7 table top
Second lifting cylinder for 1700 kg load-bearing capacity (minus plate) Through-hardened tool steel X8.7
Only compatible with mobile lifting table 1200 kg upon request + Plasma nitration 1500 x 1000 mm upon request
2-HS009921 Boreholes Diagonal grid 2-HS280035.XD7D
approx. 468 kg
Scope of delivery: 1x lifting cylinder, 1x foot pedal, fastening material Material thickness approx. 24,5 – 27 mm
Height of table side 200 mm
Working height from approx. 750 to 1050 mm Supplementary set, load-bearing capacity 1700 kg
Second lifting cylinder for 1700 kg load-bearing capacity (minus plate)
Only compatible with mobile lifting table 1200 kg upon request
2-HS009921
Scope of delivery: 1x lifting cylinder, 1x foot pedal, fastening material
The base –
a sturdy frame
100 mm
120 mm 18 0 mm
195 mm
240 m
83 mm
m
25 mm
240 m
53 mm
m
Sets
Clamp Bolt Stop Square Hex wrench Bench vice
Material burnished / nitrided burnished Aluminum nitrided
Item No. 160620 160511 160412 160108.N 160852 004300
Set A: 2-167320
Optional: 4 castors with locking brake
400 kg
* 2x 6x 4x 1x upon request
Set B: 2-167340 4x 8x 6x 2x 1x 1x upon request
86 87
22 Siegmund Workstation Siegmund Workstation 28
224004.P 804004.X7
incl. Perforated plate upon request upon request upon request incl. Perforated plate upon request upon request upon request
Weight approx. 194 kg 2-224001 2-227321 2-227341 Weight approx. 168 kg 2-284001 2-287321 2-287341
3x Drawer 180 mm upon request upon request upon request 3x Drawer 180 mm upon request upon request upon request
1x Drawer 240 mm 1x Drawer 240 mm
2-224005 2-227323 2-227343 2-284005 2-287323 2-287343
Weight approx. 233 kg Weight approx. 207 kg
50 – 165 mm
50 – 165 mm
300 mm
175 mm
75 mm
156 mm
150 mm
300 mm
95 mm
81 mm
Sets Sets
Clamp Bolt Stop Square Hex wrench Bench vice Clamp Bolt Spacer Ring pack of 4 Stop Square Hex wrench Bench vice
Material burnished / nitrided burnished nitrided nitrided Material nitrided burnished nitrided Aluminum nitrided
Item No. 220610.1 220511 220410.N 220110.N 220852 004302 Item No. 280610.N 280511 800653.1.N 280412 280109.N 280852.1 004302
Set A: 2-227320 2x 6x 6x 1x upon request Set A: 2-287320 2x 6x 2x 6x 1x upon request
Set B: 2-227340 4x 8x 6x 2x 1x 1x upon request Set B: 2-287340 4x 8x 2x 6x 2x 1x 1x upon request
1
For clamping with 280511 bolts a Spacer Ring 800653.1.N is required.
88 89
28 22 16 Siegmund Workstation Siegmund Workstation 16 22 28
b b b
c
b c c c
a a b a a a
2-004002 Siegmund Workstation Basic frame upon request 2-164030 Clamp holder System 16 upon request
left / right: 600 mm space for drawers, incl. assembly instructions for self-assembly, Perforated Plates online available powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
1.030 mm 630 mm 838 mm 1.000 kg 45,00 kg 580 mm 46 mm 39 mm 0,83 kg
2-004020 Shelf upon request 2-224030 Clamp holder System 22 upon request
powder coated finish, placeable on both sides powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
482 mm 144 mm 40 mm 10 kg 1,65 kg 580 mm 46 mm 39 mm 0,77 kg
2-004025 Toolwall incl. Shelf upon request 2-284030 Clamp holder System 28 upon request
powder coated finish, placeable on both sides powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
- - - 30 kg 7,87 kg 580 mm 46 mm 49 mm 0,84 kg
2-004100 Equipment Workstation with 4 casters upon request
b b b
b c
c c
c c c
c
b b b
a a a a a a a
2-004220.WS Drawer with clip rail and mounting, 60 mm for Workstation upon request 2-164035 Bolt and prism holder System 16 upon request
powder coated finish, upgrading possible at any time, placeable on both sides powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
590 mm 400 mm 60 mm 50 kg 7,50 kg 482 mm 20 mm 99 mm 0,74 kg
2-004225.WS Drawer with clip rail and mounting, 120 mm for Workstation upon request 2-224035 Bolt and prism holder System 22 upon request
powder coated finish, upgrading possible at any time, placeable on both sides powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
590 mm 400 mm 120 mm 50 kg 9,00 kg 482 mm 20 mm 99 mm 0,75 kg
2-004230.WS Drawer with clip rail and mounting, 180 mm for Workstation upon request 2-284035 Bolt and prism holder System 28 upon request
powder coated finish, upgrading possible at any time, placeable on both sides powder coated finish, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) Weight:
590 mm 400 mm 180 mm 50 kg 9,50 kg 482 mm 20 mm 109 mm 0,80 kg
2-004235.WS Drawer with clip rail and mounting, 240 mm for Workstation upon request
powder coated finish, upgrading possible at any time, placeable on both sides
Length: (a) Width: (b) Height: (c) TF: Weight:
590 mm 400 mm 240 mm 50 kg 10,00 kg
TF=Load capacity;
90 = Item produced for stock = Item produced on order Explanations see page 3 91
28 16 Extensions for perforated plates Extensions for perforated plates 16 28
Create more working surface when using System 16 b
a1 b a1 b
c c
a a
c
164050 Extension for perforated plates 1 row of holes - nitrided upon request
incl. 2 set screws for fine adjustment, for fixing: 1x 160528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
331 mm 49 mm 33 mm 250 mm 2,00 kg
2-164055 Extension for perforated plates 2 rows of holes - nitrided upon request
incl. 4 set screws for fine adjustment, for fixing: 2x 160528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
331 mm 99 mm 33 mm 250 mm 3,20 kg
2-164051 External stop bracket for perforated plates - nitrided upon request
incl. 2 set screws for fine adjustment, for fixing: 1x 160528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
282 mm 49 mm 112 mm 250 mm 2,00 kg
A single borehole row extension requires The extension with two or more rows of boreholes The external stop bracket is similar to a stop
little space and is ideal for light structures. provides a wider and more stable contact area for on table sides. The entire perforated plate is
clamping outside the perforated plate. available for component support as boreholes
are used for mounting the stop bracket only.
b
System 28 b
a1
a1
a a
a1 b a1 b
c c
a a
c c
2-284050 Extension for perforated plates 1 row of holes - nitrided upon request
incl. 4 set screws for fine adjustment, for perforated plates and plasma nitrided Basic 8.7 tables, material thickness 25 mm, for fixing: 1x 280528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
381 mm 99 mm 60 mm 300 mm 7,40 kg
2-284051 External stop bracket for perforated plates - nitrided upon request
incl. 4 set screws for fine adjustment, for perforated plates and plasma nitrided Basic 8.7 tables, material thickness 25 mm, for fixing: 1x 280528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
360 mm 99 mm 126 mm 300 mm 8,10 kg
2-804050 Extension Premium Light for perforated plates Premium Light 1 row of holes - nitrided upon request
incl. 4 set screws for fine adjustment, for perforated plates material thickness 15 mm, for fixing: 1x 800528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
381 mm 99 mm 40 mm 300 mm 4,70 kg
2-804051 External stop bracket Premium Light for perforated plates Premium Light - nitrided upon request
incl. 4 set screws for fine adjustment, for perforated plates material thickness 15 mm, for fixing: 1x 800528, attachment to round perforated plates not possible
Length: (a) Width: (b) Height: (c) Length: (a1) Weight:
340 mm 99 mm 114 mm 300 mm 4,90 kg
Caution, risk of tipping over when the load is uneven. Do not exceed the maximum load capacity of the base frame.
Further detailed information is available at: (See user manual) The mounting on round perforated plates is not possible and only limited on octagonal plates.
www.siegmund.com/F-extension
= Scratch-proof = Welding spatter protection = Corrosion protection
92 = Item produced for stock = Item produced on order Explanations see page 3 93
Aluminum profiles
Lightweight clamping tools
Siegmund aluminum profiles offer many application possibilities such as table extensions or vertical
clamping surfaces. The versatile boreholes provide many clamping and combination options with other
squares and stops.
System 16 System 22 System 28 Thanks to their properties, aluminum profiles are well suited as clamping tools, though depending on their usage they are subjects to wear. Products made of aluminum are well suited for tacking
your welding assemblies. While welding we recommend to cover or, if possible, remove the aluminum profiles. To assure a prolonged service life of your aluminum profiles, we recommend the use
of an anti-spatter spray (e.g. Siegmund anti-spatter spray). Occasionally adhered weld spatters can be removed by grinding. Despite all precautions, it is possible that iron residues remain in the
Page 111 Page 139 Page 179 aluminum. We recommend separating the production into work areas for rusting and non-rusting materials.
94 95
Aluminum profiles
Adapter for table connection – Three-dimensional clamping with aluminum profiles
Spacer Rings
Please note:
• First attach the adapter to the aluminum
Aluminum profile
profile using the flush mount bolt
• Then fasten it with at least Page 111 / 139 / 179
Fastening profile to profile 2 fast clamping bolts to the table
Siegmund table
Adapter for table
e.g. welding table, perforated plate connection
or slot table
inserted into the profile
from page 46
by clamping
System 16 System 22 System 28 Page 112 / 140 / 180
Also available in aluminum-titanium! Also available in aluminum-titanium! Also available in aluminum-titanium!
96
16 Stops Stops 16
A versatile range of Siegmund Stops
provide quick and easy clamping.
Many stop lengths are available when space is The combination of round and elongated bore holes Rounded edges and corners offer part protection
restricted with large set-ups. Almost all tools offers both fixed and variable clamping options. Many and safety, thereby reducing component damage
are nitrided and provide corrosion resistant, tools also have scales to enable accurate positioning. and risk of injury to the user.
wear free long lasting surfaces. Fast clamping bolts are recommended for fixing stops
and squares on welding tables.
a a
d d d
b b b
elongated hole
Length: (a) Width: (b) MS: (d) WS: VB: Weight:
80 mm 30 mm 12 mm - 50 mm 0,07 kg
2-160412 Flex Stop 12x83 - Aluminum upon request
98 = Item produced for stock = Item produced on order Explanations see page 3 99
16 Stops Stops 16
a a
a
a
d
d d b
b b b
2-160415 Flex Stop 12x78 Steel - Galvanized upon request 2-160425.N Universal Stop 300 M - nitrided upon request
long clamping bolt required, elongated hole incl. 2x Spacer Sleeve, infinite adjustment from 0-90°
Length: (a) Width: (b) MS: (d) WS: VB: Weight: Length: (a) Width: (b) Height: (c) MS: (d) VB: Weight:
97 mm 24 mm 24 mm 4 mm 71 mm 0,16 kg 130 mm 130 mm - 5 mm - 0,40 kg
MS=Material thickness; WS=Wall thickness; VB=Adjusting range; MS=Material thickness; VB=Adjusting range;
a a
a
d b d b d b
3 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
150 mm 35 mm 12 mm 50 mm 0,33 kg
2-160450.N Universal Stop / Clamping Bridge - nitrided upon request
3 system boreholes, usable as clamping bridge, can be fixed with screw clamp
Length: (a) Width: (b) MS: (d) VB: Weight:
175 mm 35 mm 12 mm 50 mm 0,40 kg
MS=Material thickness; VB=Adjusting range;
100 = Item produced for stock = Item produced on order Explanations see page 3 101
16 Squares Squares 16
Flexible three dimensional working
with Siegmund Squares.
c c
c
d d d d
a a a a
b b b b
borehole / borehole
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
50 mm 30 mm 50 mm 12 mm 0,20 kg
2-160108.N Stop and Clamping Square 90 X - nitrided upon request
elongated hole
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
90 mm 30 mm 25 mm 12 mm 0,19 kg
2-160109.N Stop and Clamping Square 90 SL - nitrided upon request
sizes. Almost all tools are nitrided and provide extension – the Siegmund clamping squares open and safety, thereby reducing component damage elongated hole / elongated hole
corrosion resistant, wear free long lasting surfaces. up the world of three-dimensional clamping. and risk of injury to the user. Length: (a) Width: (b) Height: (c) MS: (d) Weight:
We also offer special aluminum squares for Many tools also have scales to enable accurate 90 mm 30 mm 90 mm 12 mm 0,27 kg
MS=Material thickness;
stainless steel processing. positioning. Fast clamping bolts are recommended
for fixing stops and squares on welding tables.
c c c
d d d d
a a a a
b b b b
borehole / borehole
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
90 mm 30 mm 90 mm 12 mm 0,34 kg
2-160112.N Stop and Clamping Square 140 L - nitrided upon request
5 system boreholes / elongated hole, can be used as square and table extension for light-weight components
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
90 mm 35 mm 140 mm 12 mm 0,51 kg
MS=Material thickness;
102 = Item produced for stock = Item produced on order Explanations see page 3 103
16 Squares Squares 16
d
c c
c c c
d
a d
b a a a a
b b b
2-160114.N Stop and Clamping Square 150 L - nitrided upon request 2-160134.N Stop and Clamping Square 500 GK left - nitrided upon request
6 system boreholes / elongated hole stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) Ø: MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
90 mm 35 mm 150 mm - 12 mm 0,65 kg 195 mm 49 mm 500 mm 14 mm 5,30 kg
2-160162.N Stop and Clamping Square 300 G - nitrided upon request 2-160136.N Stop and Clamping Square 500 GK right - nitrided upon request
stop on left, usable as table extension, material: GGG40 stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) Ø: MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
150 mm 49 mm 300 mm - 12 mm 2,51 kg 195 mm 49 mm 500 mm 14 mm 5,30 kg
2-160164.N Stop and Clamping Square 500 G - nitrided upon request 2-160146.N Stop and Clamping Square 750 GK left - nitrided upon request
stop on left, usable as table extension, material: GGG40 stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) Ø: MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
195 mm 49 mm 500 mm - 12 mm 4,56 kg 200 mm 100 mm 750 mm 14 mm 8,30 kg
2-160101.N Rotation Angle 150 - nitrided upon request 2-160148.N Stop and Clamping Square 750 GK right - nitrided upon request
180° infinite adjustment stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) Ø: MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
- - 150 mm 150 mm 12 mm 1,80 kg 200 mm 100 mm 750 mm 14 mm 8,30 kg
MS=Material thickness; MS=Material thickness;
c c
a a a
b b b
2-160161.N Stop and Clamping Square 250 G with rotation angle left - nitrided upon request 2-160120 Stop and Clamping Square 250 GK left - Aluminum-Titanium upon request
stop on left, usable as table extension, material: GGG40, recommended as a pair usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
145 mm 49 mm 250 mm 14 mm 2,16 kg 145 mm 49 mm 250 mm 14 mm 1,20 kg
2-160163.N Stop and Clamping Square 250 G with rotation angle right - nitrided upon request 2-160121 Stop and Clamping Square 250 GK right - Aluminum-Titanium upon request
stop on right, usable as table extension, material: GGG40, recommended as a pair usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
145 mm 49 mm 250 mm 14 mm 2,16 kg 145 mm 49 mm 250 mm 14 mm 1,20 kg
2-160124.N Stop and Clamping Square 250 GK left - nitrided upon request 2-160138 Stop and Clamping Square 500 GK left - Aluminum-Titanium upon request
stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
145 mm 49 mm 250 mm 14 mm 2,10 kg 195 mm 49 mm 500 mm 14 mm 1,98 kg
2-160126.N Stop and Clamping Square 250 GK right - nitrided upon request 2-160139 Stop and Clamping Square 500 GK right - Aluminum-Titanium upon request
stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
145 mm 49 mm 250 mm 14 mm 2,10 kg 195 mm 49 mm 500 mm 14 mm 1,98 kg
MS=Material thickness; MS=Material thickness;
104 = Item produced for stock = Item produced on order Explanations see page 3 105
16 Squares Squares 16
c
c
c c c
b a b a b a
a
b a a
b b
2-160140.N Stop and Clamping Square 250 D - nitrided upon request 2-160300.N Support and Clamping Frame, small 150x100x50 - nitrided upon request
stop on right, with diagonal grid, as table extension and vertical superstructure, material: GGG40 stop on right, usable as table extension
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) Weight:
200 mm 100 mm 250 mm 14 mm 6,60 kg 150 mm 100 mm 50 mm 2,10 kg
2-160142.N Stop and Clamping Square 500 D - nitrided upon request 2-160301.N Support and Clamping Frame, small 150x100x50 - nitrided upon request
stop on right, with diagonal grid, as table extension and vertical superstructure, material: GGG40 stop on left, usable as table extension
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) Weight:
200 mm 100 mm 500 mm 14 mm 11,50 kg 150 mm 100 mm 50 mm 2,10 kg
2-160144.N Stop and Clamping Square 750 D - nitrided upon request 2-160302.N Support and Clamping Frame, large 300x200x50 - nitrided upon request
stop on right, with diagonal grid, as table extension and vertical superstructure, material: GGG40 usable as table extension
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) Weight:
200 mm 100 mm 750 mm 14 mm 16,40 kg 300 mm 200 mm 50 mm 7,40 kg
MS=Material thickness;
c
c c
c
b b
b a a b a a
e e
2-160190.N Corner Connection, Cast Iron - nitrided upon request 2-160280.P Clamping Block 300x300x100 - Plasma nitrided upon request
45° diagonal table extension, material: GGG40 five-sided, to connect tables (with connecting bolt 160560.N), as table extension and vertical superstructure
Length: (a) Width: (b) Height: (c) SL: (e) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
100 mm 65 mm 100 mm - 1,70 kg 300 mm 300 mm 100 mm 12 mm 16,00 kg
2-160171 Universal Angle Hydromechanical Clamping - burnished upon request 2-160272.P Clamping Block 400x200x200 - Plasma nitrided upon request
225° infinite adjustment, suitable matching hex wrench 6 (280852.1) not included five-sided, to connect tables (with connecting bolt 160560.N), as table extension and vertical superstructure
Length: (a) Width: (b) Height: (c) SL: (e) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
- - - 250 mm 2,80 kg 400 mm 200 mm 200 mm 12 mm 25,00 kg
2-160170.N Universal Angle Mechanical Clamping - nitrided upon request 2-160290.P Clamping Block 500x500x100 - Plasma nitrided upon request
includes setting template, 10° to 150° adjustment five-sided, to connect tables (with connecting bolt 160560.N), as table extension and vertical superstructure
Length: (a) Width: (b) Height: (c) SL: (e) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
- - - 260 mm 3,40 kg 500 mm 500 mm 100 mm 12 mm 40,00 kg
SL=Side length; MS=Material thickness;
106 = Item produced for stock = Item produced on order Explanations see page 3 107
16 Squares Squares 16
MS=Material thickness;
Front side
c
The front side of the square is a stable
clamping surface with a variety of
options. In combination with stops
and squares with elongated holes the
a
height can be adjusted flexibly.
b
MS=Material thickness;
108 = Item produced for stock = Item produced on order Explanations see page 3 109
16 Aluminum profiles & Accessories Aluminum profiles & Accessories 16
Low cost, lightweight, large component clamping tools!
Move large components without a crane or forklift.
160513
160511
a
a
c c
b b
Lightweight clamping tools Suitable accessories 4-AR16014120.VL 25 mm Grid elongated hole 1.200 mm 100 mm 24 mm 1,73 kg upon request
160511
160511
a a
c c
b b
AP160602.N AP160605.N
Aluminum profile U-shape 100x100 mm
Clamping on up to 4 sides possible. Requires Clamping Bolt without slot Double, as table extension and vertical clamping surface, from 1000 mm support through table leg required,
consider further instructions for use for the article online! Flatness tolerance < 0,8 mm / 1000 mm
Style: Length: (a) Width: (b) Height: (c) Weight:
4-AQ16014050.V 25 mm Grid 500 mm 100 mm 100 mm 2,00 kg upon request
4-AQ16014050.VL 25 mm Grid elongated hole 500 mm 100 mm 100 mm 1,93 kg upon request
4-AQ16014080.VL 25 mm Grid elongated hole 800 mm 100 mm 100 mm 3,07 kg upon request
4-AQ16014100.VL 25 mm Grid elongated hole 1.000 mm 100 mm 100 mm 3,76 kg upon request
4-AQ16014120.VL 25 mm Grid elongated hole 1.200 mm 100 mm 100 mm 4,59 kg upon request
4-AQ16014150.VL 25 mm Grid elongated hole 1.500 mm 100 mm 100 mm 5,69 kg upon request
4-AQ16014200.VL 25 mm Grid elongated hole 2.000 mm 100 mm 100 mm 7,62 kg upon request
110 = Item produced for stock = Item produced on order Explanations see page 3 111
16 Aluminum profiles & Accessories
c c
d d
a a
b b
2-AP160399 2-AP160399.AT
2-AP160399 Adapter for table connection for aluminum profiles - nitrided upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 160511, 4x AP160528 (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
76 mm 76 mm 37 mm 12 mm 0,55 kg
2-AP160399.AT Adapter for table connection for aluminum profiles - Aluminum-Titanium upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 160511, 4x AP160528 (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
76 mm 76 mm 37 mm 12 mm 0,21 kg
MS=Material thickness;
4 4
for using screw clamps in aluminum profiles, for Screw Clamps: 160610, 160630, 160601, 160604, 160620
Length: (a) Width: (b) Height: (c) Ø: Weight:
48 mm - - 26 mm 0,11 kg
2-AP160602.N Adapter for screw clamps double - nitrided upon request
for using screw clamps in aluminum profiles, for Screw Clamps: 160610, 160630, 160601, 160604, 160620
Length: (a) Width: (b) Height: (c) Ø: Weight:
60 mm - - 26 mm 0,13 kg
2-AP160602.X7 Oblong adapter for screw clamps upon request
for using screw clamps in aluminum profiles, for Screw Clamps: 160610, 160630, 160601, 160604, 160620, for fixing: Clamping bolt without slot
Length: (a) Width: (b) Height: (c) Ø: Weight:
124 mm 23 mm 12 mm - 0,19 kg
2-AP160603.X7 Round adapter for screw clamps upon request
for using screw clamps in aluminum profiles, for Screw Clamps: 160610, 160630, 160601, 160604, 160620, for fixing: Clamping bolt without slot
Length: (a) Width: (b) Height: (c) Ø: Weight:
98 mm 98 mm 12 mm - 0,60 kg
112 = Item produced for stock = Item produced on order Explanations see page 3 113
16 Bolts Clamping bolt without slot 16
6
6
6
For connecting and fastening Siegmund
tools together and to welding tables.
for clamping 2 components, Clamping range approx. 22-26 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
55 mm 16 mm 50,00 kN 10,00 Nm 10,00 Nm 4,00 kN 2,00 kN 0,11 kg
2-160590.3 Areal Clamping Bolt triple - burnished upon request
for clamping 3 components, Clamping range approx. 34-38 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
67 mm 16 mm 50,00 kN 10,00 Nm 10,00 Nm 4,00 kN 2,00 kN 0,13 kg
2-160590.4 Areal Clamping Bolt quadruple - burnished upon request
for clamping 4 components, Clamping range approx. 46-50 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
79 mm 16 mm 50,00 kN 10,00 Nm 10,00 Nm 4,00 kN 2,00 kN 0,14 kg
Different sizes and styles Fast and simple handling Bolt without slot for aluminum profiles SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
Our bolts are made of hardened high-alloy steel The bolts can easily be fixed and loosened by hand or Bolts without an O-ring slot are ideal for use with
for maximum strength. Choose from a wide range with a hex wrench. No additional tools are required. aluminum profiles. Thanks to the smooth bolt body,
of fast clamping bolts, connecting bolts and much The bolt can be cleaned easily at any time. they can be clamped very easily in the aluminum
more. The magnetic clamping bolts are available profiles without tilting.
in aluminum. 4
12 mm
12 mm 12 mm
12 mm
2-160595 2-160595.3 2-160595.4
12 mm 12 mm
12 mm 12 mm 12 mm
2-160595 Areal Clamping Flush Mount Bolt double - burnished upon request
for clamping 2 components, countersunk connection of components, Clamping range approx. 22-26 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
Bolt double / Bolt short Bolt triple / Bolt long Bolt quadruple 33 mm 16 mm 45,00 kN 10,00 Nm 10,00 Nm 3,00 kN 2,00 kN 0,05 kg
2-160595.3 Areal Clamping Flush Mount Bolt triple - burnished upon request
for clamping 3 components, countersunk connection of components, Clamping range approx. 34-38 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
45 mm 16 mm 45,00 kN 10,00 Nm 10,00 Nm 3,00 kN 2,00 kN 0,07 kg
2-160595.4 Areal Clamping Flush Mount Bolt quadruple - burnished upon request
for clamping 4 components, countersunk connection of components, Clamping range approx. 46-50 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
57 mm 16 mm 45,00 kN 10,00 Nm 10,00 Nm 3,00 kN 2,00 kN 0,08 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
114 = Item produced for stock = Item produced on order Explanations see page 3 115
16 Clamping bolt without slot Clamping bolt without slot 16
4
4 6
4 6
4
4 4
2-160511 Fast Clamping Bolt without slot double - burnished upon request 2-160583 Connecting Bolt with collar double - burnished upon request
for clamping 2 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 2 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
53 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,08 kg 39 mm 16 mm 55,00 kN 15,00 Nm 15,00 Nm 3,00 kN 0,07 kg
2-160513 Fast Clamping Bolt without slot triple - burnished upon request 2-160584 Connecting Bolt with collar triple - burnished upon request
for clamping 3 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 3 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
65 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,10 kg 51 mm 16 mm 55,00 kN 15,00 Nm 15,00 Nm 3,00 kN 0,09 kg
2-160515 Fast Clamping Bolt without slot quadruple - burnished upon request 2-160585 Connecting Bolt with collar quadruple - burnished upon request
for clamping 4 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 4 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
77 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,12 kg 63 mm 16 mm 55,00 kN 15,00 Nm 15,00 Nm 3,00 kN 0,11 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
4
4
4
4
4
4
2-AP160528 Flush Mount Bolt without slot double - burnished upon request 2-160524 Fast Clamping Bolt flat without slot double - burnished upon request
for clamping 2 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight for clamping 2 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
32 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 1,00 kN 0,04 kg 36 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,06 kg
2-AP160529 Flush Mount Bolt without slot triple - burnished upon request 2-160525 Fast Clamping Bolt flat without slot triple - burnished upon request
for clamping 3 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight for clamping 3 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
44 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 1,00 kN 0,06 kg 48 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,08 kg
2-AP160530 Flush Mount Bolt without slot quadruple - burnished upon request 2-160571 Fast Clamping Bolt adjustable without slot short - burnished upon request
for clamping 4 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight Clamping dimension 12 – 24 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
56 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 1,00 kN 0,08 kg 78 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,13 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. 2-160573 Fast Clamping Bolt adjustable without slot long - burnished upon request
Clamping dimension 24 – 36 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
90 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,15 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
116 = Item produced for stock = Item produced on order Explanations see page 3 117
16 Bolts Bolts 16
6
6
4
6 6
2-160510 Fast Clamping Bolt short - burnished upon request 2-160540 Positioning Bolt - burnished upon request
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares substitutes a second clamping bolt cost-effectively, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
53 mm 16 mm 55,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,08 kg 38 mm 16 mm - - - 0,07 kg
2-160532 Universal Bolt short - burnished upon request 2-160560.N Connecting Bolt short - nitrided upon request
for clamping 2 components, Clamping range 22-28 mm, MUST NOT be used for connecting tables and U-shaped squares for connecting 2 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
59 mm 16 mm 50,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,11 kg 25 mm 16 mm 50,00 kN 15,00 Nm 4,00 kN 0,03 kg
2-160533 Universal Bolt long - burnished upon request 2-160561 Connecting Bolt long - burnished upon request
for clamping 3 components, Clamping range 34-40 mm, MUST NOT be used for connecting tables and U-shaped squares for connecting 3 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
71 mm 16 mm 50,00 kN 10,00 Nm 2,50 Nm 10,00 kN 0,12 kg 37 mm 16 mm 50,00 kN 15,00 Nm 4,00 kN 0,05 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
2-160528 Flush Mount Bolt short - burnished upon request 2-160740 Magnetic Clamping Bolt 34 - Aluminum upon request
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes Length of Shaft 12 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: Weight:
31 mm 16 mm 55,00 kN 10,00 Nm - 3,00 kN 0,04 kg 34 mm 16 mm 0,02 kg
2-160529 Flush Mount Bolt long - burnished upon request 2-160740.1 Magnetic Clamping Bolt 46 - Aluminum upon request
for clamping 3 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes Length of Shaft 24 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: Weight:
43 mm 16 mm 55,00 kN 10,00 Nm - 3,00 kN 0,05 kg 46 mm 16 mm 0,03 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. 2-160740.2 Magnetic Clamping Bolt 58 - Aluminum upon request
Length of Shaft 36 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: Weight:
58 mm 16 mm 0,04 kg
2-160539 Spacer Ring for Magnetic Bolt - burnished upon request
118 = Item produced for stock = Item produced on order Explanations see page 3 119
16 Clamps & Accessories Clamps & Accessories 16
Innovative solutions for clamping and fixing
workpieces on Siegmund welding tables.
195 mm
145 mm
200 mm
Tr 12x3 Tr 12x3
36
0°
Tr 12x3
160656 160656
195 mm
160656
160653
70-125 mm
35-125 mm 35-125 mm
interchangeable prism, ball diameter spindle 8 mm, stepless rotation from 0°-360°
max. holding force Width: (b) Height: (c) Weight:
2,5 kN - 200 mm 0,75 kg
2-160606 Professional Fast Tension Clamp - burnished / nitrided upon request
recommended only for plasma nitrided welding tables, Vertical Bar reinforced
max. holding force Width: (b) Height: (c) Weight:
2,5 kN 132 mm 150 mm 0,90 kg
2-160601 Screw Clamp with Round Pipe - burnished upon request
interchangeable prism, ball diameter spindle 8 mm, suitable for simple clamping applications, fastening with an adjusting ring
Different sizes and styles Fast and simple handling Prisms and spare parts
max. holding force Width: (b) Height: (c) Weight:
Whether classic clamps or fast clamping versions – With a few simple steps you can position the We offer various prisms and spare parts for various 1,5 kN 163 mm 200 mm 1,00 kg
Siegmund offers the right clamping elements for every Siegmund clamps and quick-change clamp in the clamps. For example, polyamide prisms for stainless
project. Choose from different sizes, types and handles. borehole grid and clamp the workpieces. steel work or longer horizontal / vertical bars to
100 mm
bridge a larger span width. ± 42°
195 mm
Accessories available online:
80
www.siegmund.com/F-clamp16
mm
360°
Tr 12x3
c
160656
160656
160653
150 mm
45-135 mm
interchangeable prism, ball diameter spindle 8 mm, clamping at an angle of +/- 42°, fastening with an adjusting ring
max. holding force Width: (b) Height: (c) Ø: Weight:
0,6 kN 165 mm 150 mm - 0,80 kg
2-160620 Basic Screw Clamp - burnished / nitrided upon request
120 = Item produced for stock = Item produced on order Explanations see page 3 121
16 Clamps & Accessories Clamps & Accessories 16
2-160656 Prism for Screw Clamps - burnished / nitrided upon request 2-160660 Pressure Ball for Screw Clamps - burnished upon request
for spindle with ball diameter 8 mm, compatible with 16 mm boreholes and clamps for spindle with ball diameter 8 mm, only suitable for clamps, for clamping in corners or grooves
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
14 mm 25 mm 0,02 kg 13 mm 20 mm 0,02 kg
2-160656.E Prism for Screw Clamps - Stainless Steel upon request 2-160660.E Pressure Ball for Screw Clamps - Stainless Steel upon request
for spindle with ball diameter 8 mm, compatible with 16 mm boreholes and clamps, for scratch-resistant surfaces (rust prevention) for spindle with ball diameter 8 mm, only suitable for clamps, for scratch-resistant surfaces (rust prevention), for clamping in corners or grooves
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
14 mm 25 mm 0,02 kg 13 mm 20 mm 0,02 kg
2-160656.PA Prism for Screw Clamps - Polyamide upon request 2-160660.PA Pressure Ball for Screw Clamps - Polyamide upon request
for spindle with ball diameter 8 mm, compatible with 16 mm boreholes and clamps, for scratch-sensitive surfaces for spindle with ball diameter 8 mm, only suitable for clamps, for scratch-sensitive surfaces, for clamping in corners or grooves
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
14 mm 25 mm 0,01 kg 13 mm 20 mm 0,01 kg
2-160661 Pressure Ball Blank for Screw Clamps - burnished upon request
2-160650 Duo Prism Ø 25 - burnished / nitrided upon request 2-160706 Quick-Change Clamp 100 upon request
for spindle with ball diameter 8 mm, only suitable for clamps Length clamping arm 100 mm, Clamping range 0-100 mm, Mounting in system boreholes
Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
19 mm 25 mm 0,04 kg 340 mm 30 mm 150 mm 1,20 kg
2-160650.A Duo Prism Ø 25 - Aluminum upon request 2-160707 Quick-Change Clamp 160 upon request
for spindle with ball diameter 8 mm, only suitable for clamps Length clamping arm 160 mm, Clamping range 0-140 mm, Mounting in system boreholes
Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
19 mm 25 mm 0,01 kg 360 mm 30 mm 150 mm 1,20 kg
2-160650.PA Duo Prism Ø 25 - Polyamide upon request
for spindle with ball diameter 8 mm, only suitable for clamps, for scratch-sensitive surfaces
Height: (c) Ø: Weight:
19 mm 25 mm 0,01 kg
122 = Item produced for stock = Item produced on order Explanations see page 3 123
16 Prisms & Supports Prisms & Supports 16
Stable surfaces for pipes and components of all
kinds with prisms and supports from Siegmund.
c c c c c c
2-160645.1.N Vario Prism Ø 50 90°/120° with screwed-in collar - nitrided upon request
M10 thread for e.g. prism extensions Item No. 160649, for round and square pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,21 kg
2-160645.1.A Vario Prism Ø 50 90°/120° with screwed-in collar - Aluminum upon request
M10 thread for e.g. prism extensions Item No. 160649, for round and square pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,07 kg
2-160645.1.PA Vario Prism Ø 50 90°/120° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 160649, for scratch-sensitive surfaces, for round and square pipes up to Ø 80 mm
Working with pipes Different materials Extend and balance Height: (c) Ø: Weight:
20 mm 50 mm 0,03 kg
Prisms create stable support surfaces for pipes of all Each prism is available in the version Supports can be used as extensions for 2-160652.1 Prism Ø 80 120° with screwed-in collar - burnished / nitrided upon request
kinds. Each prism is supplied with a screwed-in collar nitrided (protected against weld spatter), prisms or other components such as clamps M10 thread for e.g. prism extensions Item No. 160649, for pipes up to Ø 120 mm
that enables it to be attached to the system boreholes. aluminum (stainless steel processing) or to compensate for height differences. Height: (c) Ø: Weight:
The collar can simply be unscrewed for free positioning, and polyamide (aluminum and stainless 30 mm 80 mm 0,77 kg
regardless of the hole grid. Choose from different steel processing). 2-160652.1.A Prism Ø 80 120° with screwed-in collar - Aluminum upon request
diameters and support angles. M10 thread for e.g. prism extensions Item No. 160649, for pipes up to Ø 120 mm
Height: (c) Ø: Weight:
30 mm 80 mm 0,26 kg
2-160652.1.PA Prism Ø 80 120° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 160649, for scratch-sensitive surfaces, for pipes up to Ø 120 mm
Height: (c) Ø: Weight:
30 mm 80 mm 0,12 kg
90/120°
c c
Prism can be fastened with bolts, for round and square pipes up to Ø 80 mm
Height: (c) Ø: Weight:
35 mm 50 mm 0,39 kg
2-160670 Clamping Cone - burnished / nitrided upon request
for holding round and square pipes up to Ø 45 mm, clamping with bolts
Height: (c) Ø: Weight:
40 mm 45 mm 0,26 kg
2-160822 Screw Support Ø 50 - burnished upon request
vernier adjustment height in a range of 55-75 mm, combinable with support set 160821 and prism extension
Height: (c) Ø: Weight:
55 - 75 mm 50 mm 0,71 kg
124 = Item produced for stock = Item produced on order Explanations see page 3 125
16 Prisms & Supports
incl. Set screw, height infinite adjustable between 20-105 mm, Set screw for connecting with prisms
Height: (c) Ø: Weight:
125 mm 40 mm 0,33 kg
2-160821 Set of Supports 7 pieces - burnished upon request
gradation of discs: 1 / 2 / 3 / 5 / 10 / 20 mm
Height: (c) Ø: Weight:
- 25 mm 0,08 kg
compatible with prisms, support set 160821 and screw support 160822
Length: (a) Ø: Weight:
50 mm 16 mm 0,08 kg
2-160649.2 Prism Extension 100 - burnished upon request
compatible with prisms, support set 160821 and screw support 160822
Length: (a) Ø: Weight:
100 mm 16 mm 0,15 kg
2-160649 Prism Collar Screw - burnished upon request
126 = Item produced for stock = Item produced on order Explanations see page 3 127
16 Accessories Accessories 16
Siegmund Accessories – practical solutions
for making work easier every day.
a a
b b a b
installation to the welding table with bolts or with screws to the wall
Length: (a) Width: (b) Height: (c) Weight:
500 mm 50 mm 500 mm 7,40 kg
2-280980 Protective Welding Wall upon request
mounting with 2 bolts (16: 000520, 22: 002822, 28: 280511), production-related not scratch proof, Custom color varnish available against surcharge
Length: (a) Width: (b) Height: (c) Weight:
1.600 mm 50 mm 800 mm 23,00 kg
b b
a c a c
2-160930 Module for Tool Wall with Sleeves - powder coated finish upon request
for Screw Clamp / Prisms / Bolts, back board not included in the delivery
Length: (a) Width: (b) Height: (c) Ø: Weight:
500 mm 80 mm 90 mm 16 mm 1,90 kg
2-160931 Module for Tool Wall without Sleeves - powder coated finish upon request
pack of 10
Length: (a) Width: (b) Height: (c) Ø: Weight:
22 mm - - 16 mm 0,01 kg
128 = Item produced for stock = Item produced on order Explanations see page 3 129
16 Accessories
yellow
Ø: Weight:
- 0,06 kg
2-160820 Brush Ø 17 with protecting cover upon request
130 = Item produced for stock = Item produced on order Explanations see page 3 131
22 Stops Stops 22
A versatile range of Siegmund Stops
provide quick and easy clamping.
2-220402.N 2-220403.N
Different sizes and styles Quick and easy handling Rounded corners and edges
Many stop lengths are available when space is The combination of round and elongated bore holes Rounded edges and corners offer part protection
restricted with large set-ups. Almost all tools offers both fixed and variable clamping options. Many and safety, thereby reducing component damage
are nitrided and provide corrosion resistant, tools also have scales to enable accurate positioning. and risk of injury to the user.
wear free long lasting surfaces. Fast clamping bolts are recommended for fixing stops
and squares on welding tables.
a a
a
d d d d b
b b b
elongated hole
Length: (a) Width: (b) MS: (d) VB: Weight:
150 mm 50 mm 18 mm 100 mm 0,67 kg
2-220420.N Universal Stop 225 L - nitrided upon request
3 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
300 mm 50 mm 18 mm 100 mm 1,54 kg
2-220430.N Universal Stop 500 S - nitrided upon request
5 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
500 mm 100 mm 18 mm 200 mm 6,01 kg
MS=Material thickness; VB=Adjusting range;
132 = Item produced for stock = Item produced on order Explanations see page 3 133
22 Squares Squares 22
Flexible three dimensional working
with Siegmund Squares.
c c c
c
d d d
a a a d
b b b a
b
borehole / borehole
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
175 mm 50 mm 175 mm 18 mm 1,96 kg
2-220111.N Stop and Clamping Square 175 WL - nitrided upon request
sizes. Almost all tools are nitrided and provide extension – the Siegmund clamping squares open and safety, thereby reducing component damage stop on left, usable as table extension, material: GGG40
corrosion resistant, wear free long lasting surfaces. up the world of three-dimensional clamping. and risk of injury to the user. Length: (a) Width: (b) Height: (c) MS: (d) Weight:
We also offer special aluminum squares for Many tools also have scales to enable accurate 200 mm 75 mm 300 mm 20 mm 5,70 kg
MS=Material thickness;
stainless steel processing. positioning. Fast clamping bolts are recommended
for fixing stops and squares on welding tables.
c
c
c c
d
a a a
b b a b b
stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
280 mm 95 mm 300 mm 20 mm 11,50 kg
2-220126.N Stop and Clamping Square 300 GK right - nitrided upon request
stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
280 mm 95 mm 300 mm 20 mm 11,50 kg
MS=Material thickness;
134 = Item produced for stock = Item produced on order Explanations see page 3 135
22 Squares Squares 22
c c
a
a
d d
a a
c b
e b b b
2-220190.N Corner Connection small, Cast Iron - nitrided upon request Square U-Shape 200/150 - Plasma nitrided
45° diagonal table extension, material: GGG40 with diagonal grid, to connect tables (with connecting bolt 220560.N), as table extension and vertical superstructure, from 500 mm with mounting holes for table legs,
Length: (a) Width: (b) Height: (c) MS: (d) SL: (e) Weight: from 1000 mm support through table leg required
New in assortment
200 mm 150 mm 115 mm - - 10,00 kg Length: (a) Width: (b) Height: (c) MS: (d) Weight:
2-220171 Universal Angle Hydromechanical Clamping - burnished upon request 2-220350.P 200 mm 200 mm 150 mm 18 mm 19,00 kg upon request
225° infinite adjustment, suitable matching hex wrench 14 (280854) not included 2-220360.P 500 mm 200 mm 150 mm 18 mm 43,00 kg upon request
Length: (a) Width: (b) Height: (c) MS: (d) SL: (e) Weight: 2-220370.P 1.000 mm 200 mm 150 mm 18 mm 75,00 kg upon request
2-220164.N Stop and Clamping Square 500 G with rotation angle left - nitrided upon request 2-220390.P 2.000 mm 200 mm 150 mm 18 mm 141,00 kg upon request
stop on left, usable as table extension, material: GGG40, recommended as a pair MS=Material thickness;
Length: (a) Width: (b) Height: (c) MS: (d) SL: (e) Weight:
276 mm 95 mm 500 mm 20 mm - 11,60 kg
2-220165.N Stop and Clamping Square 500 G with rotation angle right - nitrided upon request
c c
a a
b b
2-220134.N Stop and Clamping Square 600 GK left - nitrided upon request
stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
373 mm 95 mm 600 mm 20 mm 21,80 kg
2-220136.N Stop and Clamping Square 600 GK right - nitrided upon request
stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
373 mm 95 mm 600 mm 20 mm 21,80 kg
2-220144.N Stop and Clamping Square 800 GK left - nitrided upon request
stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
373 mm 95 mm 800 mm 20 mm 25,80 kg
2-220146.N Stop and Clamping Square 800 GK right - nitrided upon request
stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
373 mm 95 mm 800 mm 20 mm 25,80 kg
MS=Material thickness;
136 = Item produced for stock = Item produced on order Explanations see page 3 137
22 Aluminum profiles & Accessories Aluminum profiles & Accessories 22
Low cost, lightweight, large component clamping tools!
Move large components without a crane or forklift.
220511
220513
a a
c c
b b
Lightweight clamping tools Suitable accessories 4-AR22014120.VL 50 mm Grid elongated hole 1.200 mm 200 mm 36 mm 5,97 kg upon request
220511
220511
b
a b a
c c
AP220602.N AP220605.N
4-AR22024050.VL 50 mm Grid elongated hole 500 mm 200 mm 150 mm 5,53 kg upon request
4-AR22024080.VL 50 mm Grid elongated hole 800 mm 200 mm 150 mm 8,53 kg upon request
4-AR22024100.VL 50 mm Grid elongated hole 1.000 mm 200 mm 150 mm 10,89 kg upon request
4-AR22024120.VL 50 mm Grid elongated hole 1.200 mm 200 mm 150 mm 13,01 kg upon request
4-AR22024150.VL 50 mm Grid elongated hole 1.500 mm 200 mm 150 mm 16,32 kg upon request
4-AR22024200.VL 50 mm Grid elongated hole 2.000 mm 200 mm 150 mm 21,68 kg upon request
138 = Item produced for stock = Item produced on order Explanations see page 3 139
22 Aluminum profiles & Accessories
c d c d
a a
b b
2-AP220399 2-AP220399.AT
2-AP220399 Adapter for table connection for aluminum profiles - nitrided upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 220511, 3x AP220528 (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
163 mm 113 mm 70 mm 18 mm 3,03 kg
2-AP220399.AT Adapter for table connection for aluminum profiles - Aluminum-Titanium upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 220511, 3x AP220528 (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
163 mm 113 mm 70 mm 18 mm 1,10 kg
MS=Material thickness;
5 5
2-AP220605.N 2-AP220602.N
for using screw clamps in aluminum profiles, for Screw Clamps: 220610.1, 220630.1, 220615
Length: (a) Ø: Weight:
63 mm 35 mm 0,27 kg
2-AP220602.N Adapter for screw clamps double - nitrided upon request
for using screw clamps in aluminum profiles, for Screw Clamps: 220610.1, 220630.1, 220615
Length: (a) Ø: Weight:
81 mm 35 mm 0,32 kg
140 = Item produced for stock = Item produced on order Explanations see page 3 141
22 Bolts Clamping bolt without slot 22
14
14
for clamping 2 components, Clamping range approx. 33-39 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
84 mm 22 mm 150,00 kN 25,00 Nm 15,00 Nm 10,00 kN 3,00 kN 0,33 kg
2-220590.3 Areal Clamping Bolt triple - burnished upon request
for clamping 3 components, Clamping range approx. 51-57 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
102 mm 22 mm 150,00 kN 25,00 Nm 15,00 Nm 10,00 kN 3,00 kN 0,38 kg
2-220590.4 Areal Clamping Bolt quadruple - burnished upon request
for clamping 4 components, Clamping range approx. 69-75 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
120 mm 22 mm 150,00 kN 25,00 Nm 15,00 Nm 10,00 kN 3,00 kN 0,43 kg
Different sizes and styles Fast and simple handling Bolt without slot for aluminum profiles SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
Our bolts are made of hardened high-alloy steel The bolts can easily be fixed and loosened by hand or Bolts without an O-ring slot are ideal for use with
for maximum strength. Choose from a wide range with a hex wrench. No additional tools are required. aluminum profiles. Thanks to the smooth bolt body,
of fast clamping bolts, connecting bolts and much The bolt can be cleaned easily at any time. they can be clamped very easily in the aluminum
more. The magnetic clamping bolts are available profiles without tilting.
in aluminum. 5
18 mm
18 mm 18 mm
2-220595 2-220595.3 2-220595.4
18 mm 18 mm 18 mm
18 mm 18 mm 18 mm 2-220595 Areal Clamping Flush Mount Bolt double - burnished upon request
for clamping 2 components, countersunk connection of components, Clamping range approx. 33-39 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
Bolt double / Bolt short Bolt triple / Bolt long Bolt quadruple 49 mm 22 mm 130,00 kN 25,00 Nm 15,00 Nm 6,00 kN 3,00 kN 0,12 kg
2-220595.3 Areal Clamping Flush Mount Bolt triple - burnished upon request
for clamping 3 components, countersunk connection of components, Clamping range approx. 51-57 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
67 mm 22 mm 130,00 kN 25,00 Nm 15,00 Nm 6,00 kN 3,00 kN 0,18 kg
2-220595.4 Areal Clamping Flush Mount Bolt quadruple - burnished upon request
for clamping 4 components, countersunk connection of components, Clamping range approx. 69-75 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
85 mm 22 mm 130,00 kN 25,00 Nm 15,00 Nm 6,00 kN 3,00 kN 0,23 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
10
5
5 5
2-220511 Fast Clamping Bolt without slot double - burnished upon request 2-220583 Connecting Bolt with collar double - burnished upon request
for clamping 2 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 2 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
83 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,27 kg 55 mm 22 mm 130,00 kN 20,00 Nm 20,00 Nm 15,00 kN 0,20 kg
2-220513 Fast Clamping Bolt without slot triple - burnished upon request 2-220584 Connecting Bolt with collar triple - burnished upon request
for clamping 3 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 3 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
101 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,32 kg 73 mm 22 mm 130,00 kN 20,00 Nm 20,00 Nm 15,00 kN 0,27 kg
2-220515 Fast Clamping Bolt without slot quadruple - burnished upon request 2-220585 Connecting Bolt with collar quadruple - burnished upon request
for clamping 4 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 4 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
119 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,37 kg 91 mm 22 mm 130,00 kN 20,00 Nm 20,00 Nm 15,00 kN 0,30 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
5
5
5
5
5
5
5
2-AP220528 Flush Mount Bolt without slot double - burnished upon request 2-220524 Fast Clamping Bolt flat without slot double - burnished upon request
for clamping 2 components, countersunk connection of components, only for clamping aluminum profiles, tighten aluminum parts only hand-tight for clamping 2 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
50 mm 22 mm 130,00 kN 6,00 Nm 2,00 kN 0,13 kg 57 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,16 kg
2-AP220529 Flush Mount Bolt without slot triple - burnished upon request 2-220525 Fast Clamping Bolt flat without slot triple - burnished upon request
for clamping 3 components, countersunk connection of components, only for clamping aluminum profiles, tighten aluminum parts only hand-tight for clamping 3 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
68 mm 22 mm 130,00 kN 6,00 Nm 2,00 kN 0,18 kg 75 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,20 kg
2-AP220530 Flush Mount Bolt without slot quadruple - burnished upon request 2-220571 Fast Clamping Bolt adjustable without slot short - burnished upon request
for clamping 4 components, countersunk connection of components, only for clamping aluminum profiles, tighten aluminum parts only hand-tight Clamping dimension 18 – 36 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
86 mm 22 mm 130,00 kN 6,00 Nm 2,00 kN 0,23 kg 95 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,40 kg
SK=Shearing Force; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; Clamping torque dependent on material. 2-220573 Fast Clamping Bolt adjustable without slot long - burnished upon request
Clamping dimension 36 – 54 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
113 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,46 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
144 = Item produced for stock = Item produced on order Explanations see page 3 145
22 Bolts Bolts 22
14
14
5
10
10
10 10
2-220510 Fast Clamping Bolt short - burnished upon request 2-220540 Positioning Bolt - burnished upon request
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares substitutes a second clamping bolt cost-effectively, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
83 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,27 kg 56 mm 22 mm - - - 0,21 kg
2-220532 Universal Bolt Comfort short - burnished upon request 2-220560.N Connecting Bolt short - nitrided upon request
for clamping 2 components, Clamping range 33-39 mm, MUST NOT be used for connecting tables and U-shaped squares for connecting 2 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
93 mm 22 mm 150,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,35 kg 36 mm 22 mm 120,00 kN 15,00 Nm 6,00 kN 0,06 kg
2-220533 Universal Bolt Comfort long - burnished upon request 2-220561 Connecting Bolt long - burnished upon request
for clamping 3 components, Clamping range 51-57 mm, MUST NOT be used for connecting tables and U-shaped squares for connecting 3 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
111 mm 22 mm 130,00 kN 15,00 Nm 6,00 Nm 15,00 kN 0,41 kg 54 mm 22 mm 120,00 kN 15,00 Nm 6,00 kN 0,12 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. 2-220740 Magnetic Clamping Bolt 60 - Aluminum upon request
Length of Shaft 18 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: ZK: Weight:
60 mm 22 mm - - - 0,06 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
2-220528 2-220529
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
49 mm 22 mm 130,00 kN 15,00 Nm - 6,00 kN 0,12 kg
2-220529 Flush Mount Bolt long - burnished upon request
for clamping 3 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
67 mm 22 mm 130,00 kN 15,00 Nm - 6,00 kN 0,16 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
146 = Item produced for stock = Item produced on order Explanations see page 3 147
22 Clamps & Accessories Clamps & Accessories 22
Innovative solutions for clamping and fixing
± 42°
workpieces on Siegmund welding tables.
3000 mm
300 mm
110
mm
360°
36
0°
Tr 16x4
220657.1 Tr 16x4
220657.1
300 mm
220653
210 mm
220657.1
105-240 mm 65-220 mm
50-165 mm
interchangeable prism, ball diameter spindle 10 mm, stepless rotation from 0°-360°, Vertical Bar reinforced
max. holding force Width: (b) Height: (c) Weight:
3,5 kN - 300 mm 2,21 kg
2-220615 Professional Fast Tension Clamp - burnished / nitrided upon request
interchangeable prism, ball diameter spindle 10 mm, clamping at an angle of +/- 42°, fastening with an adjusting ring
Different sizes and styles Fast and simple handling Prisms and spare parts
max. holding force Width: (b) Height: (c) Weight:
Whether classic clamps or fast clamping versions – With a few simple steps you can position the We offer various prisms and spare parts for various 1,4 kN 265 mm 210 mm 1,91 kg
Siegmund offers the right clamping elements for every Siegmund clamps and quick-change clamp in the clamps. For example, polyamide prisms for stainless
project. Choose from different sizes, types and handles. borehole grid and clamp the workpieces. steel work or longer horizontal / vertical bars to
bridge a larger span width.
120°
for 220610.1, Acme trapezoidal thread 16 x 4 mm for system 22 screw clamp arbor, usable in every system borehole
Height: (c) Ø: Weight:
22 mm 24 mm 0,03 kg
2-220650 Duo Prism Ø 40 - burnished upon request
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps
Height: (c) Ø: Weight:
27 mm 40 mm 0,13 kg
2-220650.A Duo Prism Ø 40 - Aluminum upon request
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps
Height: (c) Ø: Weight:
27 mm 40 mm 0,06 kg
2-220650.PA Duo Prism Ø 40 - Polyamide upon request
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps, for scratch-sensitive surfaces
Height: (c) Ø: Weight:
27 mm 40 mm 0,02 kg
148 = Item produced for stock = Item produced on order Explanations see page 3 149
22 Clamps & Accessories
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps
Height: (c) Ø: Weight:
20 mm 40 mm 0,05 kg
2-220658.E Prism for Screw Clamps - Stainless Steel upon request
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps, for scratch-resistant surfaces (rust prevention)
Height: (c) Ø: Weight:
20 mm 40 mm 0,04 kg
2-220659.PA Prism for Screw Clamps - Polyamide upon request
for spindle with ball diameter 10 mm, compatible with 22 mm boreholes and clamps, for scratch-sensitive surfaces
Height: (c) Ø: Weight:
20 mm 40 mm 0,01 kg
2-220706 2-220707
Length clamping arm 100 mm, Clamping range 0-100 mm, Mounting in system boreholes
Length: (a) Width: (b) Height: (c) Weight:
340 mm 30 mm 150 mm 1,20 kg
2-220707 Quick-Change Clamp 160 upon request
Length clamping arm 160 mm, Clamping range 0-140 mm, Mounting in system boreholes
Length: (a) Width: (b) Height: (c) Weight:
360 mm 30 mm 150 mm 1,20 kg
150 = Item produced for stock = Item produced on order Explanations see page 3 151
22 Prisms & Supports Prisms & Supports 22
Stable surfaces for pipes and components of all
kinds with prisms and supports from Siegmund.
c c c c c c
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,26 kg
2-220648.1.A Prism Ø 50 135° with screwed-in collar - Aluminum upon request
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,16 kg
2-220648.1.PA Prism Ø 50 135° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 220649, for scratch-sensitive surfaces, for pipes up to Ø 80 mm
Working with pipes Different materials Extend and balance Height: (c) Ø: Weight:
20 mm 50 mm 0,08 kg
Prisms create stable support surfaces for pipes of all Each prism is available in the version Supports can be used as extensions for 2-220645.1 Vario Prism Ø 50 90° / 120° with screwed-in collar - burnished upon request
kinds. Each prism is supplied with a screwed-in collar nitrided (protected against weld spatter), prisms or other components such as clamps M10 thread for e.g. prism extensions Item No. 220649, for round and square pipes up to Ø 50 mm
that enables it to be attached to the system boreholes. aluminum (stainless steel processing) or to compensate for height differences. Height: (c) Ø: Weight:
The collar can simply be unscrewed for free positioning, and polyamide (aluminum and stainless 20 mm 50 mm 0,30 kg
regardless of the hole grid. Choose from different steel processing). 2-220645.1.A Vario Prism Ø 50 90° / 120° with screwed-in collar - Aluminum upon request
diameters and support angles. M10 thread for e.g. prism extensions Item No. 220649, for round and square pipes up to Ø 50 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,15 kg
2-220645.1.PA Vario Prism Ø 50 90° / 120° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 220649, for scratch-sensitive surfaces, for round and square pipes up to Ø 50 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,08 kg
c c c
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,58 kg
2-220651.1.A Prism Ø 60 135° with screwed-in collar - Aluminum upon request
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,32 kg
2-220651.1.PA Prism Ø 60 135° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 220649, for scratch-sensitive surfaces, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,13 kg
152 = Item produced for stock = Item produced on order Explanations see page 3 153
22 Prisms & Supports Prisms & Supports 22
a
90° 90° 90°
157° 157° 157°
c c c c c c
2-220647.1 2-220647.1.A 2-220647.1.PA 2-220652.1 2-220652.1.A 2-220652.1.PA 2-220649 2-220649.1 2-220649.2 2-220649.3
2-220647.1 Prism Ø 80 90° with screwed-in collar - burnished upon request 2-220649 Prism Extension 25 - burnished upon request
M10 thread for e.g. prism extensions Item No. 220649, for round and square pipes up to Ø 100 mm compatible with prisms, support set 220821 and screw support 220822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 1,07 kg 25 mm 22 mm 0,07 kg
2-220647.1.A Prism Ø 80 90° with screwed-in collar - Aluminum upon request 2-220649.1 Prism Extension 50 - burnished upon request
M10 thread for e.g. prism extensions Item No. 220649, for round and square pipes up to Ø 100 mm compatible with prisms, support set 220821 and screw support 220822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 0,57 kg 50 mm 22 mm 0,14 kg
2-220647.1.PA Prism Ø 80 90° with screwed-in collar - Polyamide upon request 2-220649.2 Prism Extension 100 - burnished upon request
M10 thread for e.g. prism extensions Item No. 220649, for scratch-sensitive surfaces, for round and square pipes up to Ø 100 mm compatible with prisms, support set 220821 and screw support 220822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 0,20 kg 100 mm 22 mm 0,28 kg
2-220652.1 Prism Ø 120 157° with screwed-in collar - burnished upon request 2-220649.3 Prism Extension 150 - burnished upon request
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 400 mm compatible with prisms, support set 220821 and screw support 220822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
30 mm 120 mm 1,74 kg 150 mm 22 mm 0,42 kg
2-220652.1.A Prism Ø 120 157° with screwed-in collar - Aluminum upon request
M10 thread for e.g. prism extensions Item No. 220649, for pipes up to Ø 400 mm
Height: (c) Ø: Weight:
30 mm 120 mm 0,91 kg
2-220652.1.PA Prism Ø 120 157° with screwed-in collar - Polyamide upon request
M10 thread for e.g. prism extensions Item No. 220649, for scratch-sensitive surfaces, for pipes up to Ø 400 mm
Height: (c) Ø: Weight:
30 mm 120 mm 0,30 kg
c
2-220669 2-220821 2-220821.1 2-220821.2
2-220669 Prism Collar Screw with countersunk bolt - burnished upon request
vernier adjustment height in a range of 75-110 mm, combinable with support set 220821 and prism extension compensation of 1-100 mm height difference, with M10 thread
Height: (c) Ø: Weight: Length: (a) Height: (c) Ø: Weight:
75 - 110 mm 80 mm 2,44 kg - 125 mm 50 mm 2,01 kg
2-220824 Support height adjustable with scale - burnished upon request
2-220821.1 Tower for Supports - burnished upon request
incl. Set screw, height infinite adjustable between 20-105 mm, Set screw for connecting with prisms variable support surface, with M10 thread
Height: (c) Ø: Weight: Length: (a) Height: (c) Ø: Weight:
134 mm 45 mm 0,52 kg - 125 mm 50 mm 0,39 kg
2-220821.2 Washer Set upon request
154 = Item produced for stock = Item produced on order Explanations see page 3 155
22 Accessories Accessories 22
Siegmund Accessories – practical solutions
for making work easier every day.
c
c
a a
b b
mounting with 2 bolts (16: 000520, 22: 002822, 28: 280511), production-related not scratch proof, Custom color varnish available against surcharge
Length: (a) Width: (b) Height: (c) Ø: Weight:
1.600 mm 50 mm 800 mm - 23,00 kg
2-220820 Brush Ø 24 with protecting cover upon request
yellow
Height: (c) Weight:
- 0,09 kg
2-220920 Burner Holder - burnished upon request
guarantees 100% contact to the welding table, Mounting in system boreholes, Load up to 500 ampere, Cable cross section 70-95 mm².
Height: (c) Weight:
- 0,66 kg
2-000830.N 2-000835.N
1800 kg load-bearing capacity (with 2x 280511), 1000 kg load-bearing capacity (with 2x 002822), for a safe transportation of the welding tables and heavy Siegmund components, consider further instructions for use for the article online!
Length: (a) Width: (b) Height: (c) Weight:
150 mm 150 mm 25 mm 4,70 kg
2-000835.N Shipping Bracket - nitrided upon request
2500 kg load-bearing capacity (with 2x 280511), 1000 kg load-bearing capacity (with 2x 002822), 700 kg load-bearing capacity (with 2x 160511), for a safe transportation of the welding tables and heavy Siegmund components, consider further instructions for use for the article online!
158 = Item produced for stock = Item produced on order Explanations see page 3 159
28 Stops Stops 28
A versatile range of Siegmund Stops
provide quick and easy clamping.
Many stop lengths are available when space is The combination of round and elongated bore holes Rounded edges and corners offer part protection
restricted with large set-ups. Almost all tools offers both fixed and variable clamping options. Many and safety, thereby reducing component damage
are nitrided and provide corrosion resistant, tools also have scales to enable accurate positioning. and risk of injury to the user.
wear free long lasting surfaces. Fast clamping bolts are recommended for fixing stops
and squares on welding tables.
a a a
d d d
b b b
elongated hole, for stainless steel processing, used where space is restricted
Length: (a) Width: (b) MS: (d) WS: VB: Weight:
156 mm 52 mm 25 mm 12 mm 100 mm 0,30 kg
2-280410.N Universal Stop 150 L - nitrided upon request
elongated hole
Length: (a) Width: (b) MS: (d) WS: VB: Weight:
150 mm 50 mm 25 mm - 100 mm 0,78 kg
2-280410.A Universal Stop 150 L - Aluminum upon request
160 = Item produced for stock = Item produced on order Explanations see page 3 161
28 Stops Stops 28
a a
a a
a
a a
a
d d d d d d d
b b b b b b b b
2-280420.N Universal Stop 225 L - nitrided upon request 2-280407.N Universal Stop 100 - nitrided upon request
for use with both prisms and adapters 2 system boreholes, borehole spacing 50 mm
Length: (a) Width: (b) MS: (d) VB: Weight: Length: (a) Width: (b) MS: (d) Weight:
225 mm 50 mm 25 mm 100 mm 1,40 kg 100 mm 50 mm 25 mm 0,75 kg
2-280420.A Universal Stop 225 L - Aluminum upon request 2-280408.N Universal Stop 150 - nitrided upon request
for stainless steel processing, for use with both prisms and adapters 3 system boreholes, borehole spacing 50 mm
Length: (a) Width: (b) MS: (d) VB: Weight: Length: (a) Width: (b) MS: (d) Weight:
225 mm 50 mm 25 mm 100 mm 0,55 kg 150 mm 50 mm 25 mm 1,10 kg
2-280410.1.N Universal Stop 200 L - nitrided upon request 2-280409.N Universal Stop 250 - nitrided upon request
a
a a
a
d
a d
c
c
d b d d b b
b b
2-280421 Universal Stop 225 L FDS with spring pressure part - burnished upon request 2-280422.N Universal Stop 325 L - nitrided upon request
3 system boreholes
Length: (a) Width: (b) Height: (c) MS: (d) VB: Weight:
175 mm 175 mm 50 mm 25 mm - 1,85 kg
MS=Material thickness; VB=Adjusting range;
162 = Item produced for stock = Item produced on order Explanations see page 3 163
28 Stops 28
d b
5 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
500 mm 100 mm 25 mm 200 mm 7,90 kg
2-280432.N Universal Stop 750 S - nitrided upon request
10 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
750 mm 100 mm 25 mm 200 mm 12,10 kg
2-280434.N Universal Stop 1000 S - nitrided upon request
15 system boreholes
Length: (a) Width: (b) MS: (d) VB: Weight:
1.000 mm 100 mm 25 mm 200 mm 16,30 kg
MS=Material thickness; VB=Adjusting range;
164 = Item produced for stock = Item produced on order Explanations see page 3 165
28 Squares Squares 28
Flexible three dimensional working
with Siegmund Squares.
c c c
d d
a d
b a b a
b
borehole / borehole
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
75 mm 50 mm 75 mm 25 mm 1,00 kg
2-280107.N Mounting Square - nitrided upon request
sizes. Almost all tools are nitrided and provide extension – the Siegmund clamping squares open and safety, thereby reducing component damage borehole / elongated hole
corrosion resistant, wear free long lasting surfaces. up the world of three-dimensional clamping. and risk of injury to the user. Length: (a) Width: (b) Height: (c) MS: (d) Weight:
We also offer special aluminum squares for Many tools also have scales to enable accurate 175 mm 50 mm 125 mm 25 mm 1,80 kg
MS=Material thickness;
stainless steel processing. positioning. Fast clamping bolts are recommended
for fixing stops and squares on welding tables.
c c
d d
a a
b b
166 = Item produced for stock = Item produced on order Explanations see page 3 167
28 Squares Squares 28
c
c c
c c
d d d d
a a a a
b b b b a a
b b
2-280111.N Stop and Clamping Square 175 WL - nitrided upon request 2-280124.N Stop and Clamping Square 300 GK left - nitrided upon request
elongated hole / elongated hole 100, flexible in any direction stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
175 mm 50 mm 175 mm 25 mm 1,80 kg 280 mm 95 mm 300 mm 27 mm 12,90 kg
2-280113.N Stop and Clamping Square 175 VL - nitrided upon request 2-280126.N Stop and Clamping Square 300 GK right - nitrided upon request
borehole / borehole stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
175 mm 50 mm 175 mm 25 mm 2,40 kg 280 mm 95 mm 300 mm 27 mm 12,90 kg
2-280114.N Stop and Clamping Square 200 L - nitrided upon request 2-280130.N Stop and Clamping Square 500 GK left - nitrided upon request
borehole / elongated hole stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
175 mm 50 mm 200 mm 25 mm 2,71 kg 280 mm 95 mm 500 mm 27 mm 17,50 kg
2-280112.N Stop and Clamping Square 275 L - nitrided upon request 2-280132.N Stop and Clamping Square 500 GK right - nitrided upon request
borehole / elongated hole, can be used as square and table extension for light-weight components stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
175 mm 50 mm 275 mm 25 mm 2,80 kg 280 mm 95 mm 500 mm 27 mm 17,50 kg
MS=Material thickness; MS=Material thickness;
c c
c c
c c
d d
a a
b b
a a a a
b b b b
2-280152.N Stop and Clamping Square 300 G - nitrided upon request 2-280134.N Stop and Clamping Square 600 GK left - nitrided upon request
stop on left, usable as table extension, material: GGG40 stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
200 mm 75 mm 300 mm 27 mm 6,52 kg 376 mm 95 mm 600 mm 27 mm 22,50 kg
2-280162.N Stop and Clamping Square 500 G - nitrided upon request 2-280136.N Stop and Clamping Square 600 GK right - nitrided upon request
stop on left, usable as table extension, material: GGG40 stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
200 mm 75 mm 500 mm 27 mm 9,40 kg 376 mm 95 mm 600 mm 27 mm 22,50 kg
2-280166.N Stop and Clamping Square 750 G left - nitrided upon request 2-280144.N Stop and Clamping Square 800 GK left - nitrided upon request
stop on left, usable as table extension, material: GGG40 stop on left, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
276 mm 85 mm 750 mm 27 mm 13,60 kg 376 mm 95 mm 800 mm 27 mm 27,00 kg
2-280167.N Stop and Clamping Square 750 G right - nitrided upon request 2-280146.N Stop and Clamping Square 800 GK right - nitrided upon request
stop on right, usable as table extension, material: GGG40 stop on right, usable as table extension, for heavy components, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
276 mm 85 mm 750 mm 27 mm 13,60 kg 376 mm 95 mm 800 mm 27 mm 27,00 kg
MS=Material thickness; MS=Material thickness;
168 = Item produced for stock = Item produced on order Explanations see page 3 169
28 Squares Squares 28
c c
c
c c
a
c
b
d d
a a a a a b
b b b b
2-280120 Stop and Clamping Square 300 GK left - Aluminum-Titanium upon request 2-280164.N Stop and Clamping Square 500 G with rotation angle left - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair usable as table extension, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
280 mm 95 mm 300 mm 27 mm 5,00 kg 276 mm 95 mm 500 mm 27 mm 11,50 kg
2-280121 Stop and Clamping Square 300 GK right - Aluminum-Titanium upon request 2-280165.N Stop and Clamping Square 500 G with rotation angle right - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair usable as table extension, material: GGG40, recommended as a pair
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
280 mm 95 mm 300 mm 27 mm 5,00 kg 276 mm 95 mm 500 mm 27 mm 11,50 kg
2-280138 Stop and Clamping Square 600 GK left - Aluminum-Titanium upon request 2-280195.N Sliding Base - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair Combination of a square with the sliding base enables sliding in two axes, material: GGG40
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
376 mm 95 mm 600 mm 27 mm 8,70 kg 350 mm 300 mm 50 mm - 16,00 kg
2-280139 Stop and Clamping Square 600 GK right - Aluminum-Titanium upon request 2-280101.N Rotation Angle 275 - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair 180° infinite adjustment
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
376 mm 95 mm 600 mm 27 mm 8,70 kg 180 mm 250 mm 275 mm - 10,20 kg
MS=Material thickness; MS=Material thickness;
c c
a a
a a e e
b c b c
b b
2-280140 Stop and Clamping Square 800 GK left - Aluminum-Titanium upon request 2-280190.N Corner Connection small, Cast Iron - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair 45° diagonal table extension, material: GGG40
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) SL: (e) Weight:
376 mm 95 mm 800 mm 27 mm 10,40 kg 200 mm 150 mm 120 mm - 11,80 kg
2-280141 Stop and Clamping Square 800 GK right - Aluminum-Titanium upon request 2-280191.N Corner Connection, Cast Iron - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair 45° diagonal table extension, material: GGG40
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) SL: (e) Weight:
376 mm 95 mm 800 mm 27 mm 10,40 kg 200 mm 200 mm 170 mm - 15,70 kg
2-280148 Stop and Clamping Square 1200 GK left - Aluminum-Titanium upon request 2-280170.N Universal Angle Mechanical Clamping - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair includes setting template, 10° to 150° adjustment
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) SL: (e) Weight:
376 mm 95 mm 1.200 mm 27 mm 13,50 kg - - - 350 mm 14,50 kg
2-280149 Stop and Clamping Square 1200 GK right - Aluminum-Titanium upon request 2-280171.N Universal Angle Hydromechanical Clamping - nitrided upon request
usable as table extension, for heavy components, hardness of nitrided cast steel is not achieved, recommended as a pair 225° infinite adjustment, suitable matching hex wrench 14 (280854) not included
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) SL: (e) Weight:
376 mm 95 mm 1.200 mm 27 mm 13,50 kg - - - 475 mm 23,00 kg
MS=Material thickness; SL=Side length;
170 = Item produced for stock = Item produced on order Explanations see page 3 171
28 Squares Squares 28
c c
c c
a a
a a b
b b b a
b
2-280300.N Support and Clamping Frame, Cast Iron 300x200x100 right - nitrided upon request Square U-Shape 200/100 elongated hole - Plasma nitrided
stop on right, borehole spacing 50 mm, material: GGG40 with elongated hole, to connect tables (with connecting bolt 280560.N), as table extension and vertical superstructure, from 500 mm with mounting holes for table legs, from 1000 mm
Length: (a) Width: (b) Height: (c) MS: (d) Weight: support through table leg required
300 mm 200 mm 100 mm 25 mm 19,50 kg Length: (a) Width: (b) Height: (c) MS: (d) Weight:
2-280301.N Support and Clamping Frame, Cast Iron 300x200x100 left - nitrided upon request 2-280311.P 500 mm 200 mm 100 mm 25 mm 40,00 kg upon request
stop on left, borehole spacing 50 mm, material: GGG40 2-280312.P 500 mm 200 mm 100 mm 25 mm 40,00 kg upon request
Length: (a) Width: (b) Height: (c) MS: (d) Weight: 2-280321.P 1.000 mm 200 mm 100 mm 25 mm 72,00 kg upon request
300 mm 200 mm 100 mm 25 mm 19,50 kg 2-280322.P 1.000 mm 200 mm 100 mm 25 mm 72,00 kg upon request
2-280285.P Clamping Block 400x350x200 - Plasma nitrided upon request MS=Material thickness;
five-sided, borehole spacing 50 mm
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
400 mm 350 mm 200 mm 25 mm 60,00 kg
2-280302.N Moveable Square - nitrided upon request
c c
a
a
b
b
2-280303.1.P 2.000 mm 100 mm 100 mm 25 mm 95,00 kg upon request 2-280320.P 1.000 mm 200 mm 100 mm 25 mm 75,00 kg upon request
2-280303.2.P 3.000 mm 100 mm 100 mm 25 mm 141,00 kg upon request 2-280330.P 1.500 mm 200 mm 100 mm 25 mm 108,00 kg upon request
MS=Material thickness;
172 = Item produced for stock = Item produced on order Explanations see page 3 173
28 Squares Squares 28
c
c
a
a
b
-40%
b
2-280396.1.P 200 mm 200 mm 200 mm 25 mm 31,00 kg upon request 2-800370.P 1.000 mm 200 mm 200 mm 15 mm 76,00 kg upon request
2-280360.P 500 mm 200 mm 200 mm 25 mm 67,00 kg upon request 2-800380.P 1.500 mm 200 mm 200 mm 15 mm 110,00 kg upon request
2-280370.P 1.000 mm 200 mm 200 mm 25 mm 120,00 kg upon request 2-800390.P 2.000 mm 200 mm 200 mm 15 mm 143,00 kg upon request
MS=Material thickness;
c c
a
a b
b
Square U-Shape 200/200 special size - Plasma nitrided Square U-Shape 400/200 with diagonal grid - Plasma nitrided
with diagonal grid, to connect tables (with connecting bolt 280560.N), as table extension and vertical superstructure, from 500 mm with mounting holes for table legs, from 1000 mm with diagonal grid, to connect tables (with connecting bolt 280560.N), as table extension and vertical superstructure, from 500 mm with mounting holes for table legs, from 1000 mm
support through table leg required, can be used on foundation rail with leg 280371 support through table leg required, can be used on foundation rail with leg 280371
Length: (a) Width: (b) Height: (c) MS: (d) Weight: Length: (a) Width: (b) Height: (c) MS: (d) Weight:
2-280362.P 600 mm 200 mm 200 mm 25 mm 77,00 kg upon request 2-280360.2.P 500 mm 400 mm 200 mm 25 mm 107,00 kg upon request
2-280366.P 800 mm 200 mm 200 mm 25 mm 99,00 kg upon request 2-280370.2.P 1.000 mm 400 mm 200 mm 25 mm 188,00 kg upon request
2-280374.P 1.200 mm 200 mm 200 mm 25 mm 140,00 kg upon request 2-280374.2.P 1.200 mm 400 mm 200 mm 25 mm 216,00 kg upon request
2-280378.P 1.400 mm 200 mm 200 mm 25 mm 162,00 kg upon request 2-280380.2.P 1.500 mm 400 mm 200 mm 25 mm 260,00 kg upon request
2-280382.P 1.600 mm 200 mm 200 mm 25 mm 182,00 kg upon request 2-280390.2.P 2.000 mm 400 mm 200 mm 25 mm 336,00 kg upon request
2-280386.P 1.800 mm 200 mm 200 mm 25 mm 204,00 kg upon request 2-280391.2.P 2.400 mm 400 mm 200 mm 25 mm 392,00 kg upon request
MS=Material thickness;
174 = Item produced for stock = Item produced on order Explanations see page 3 175
28 Squares Squares 28
a
b
MS=Material thickness;
Front side
The front side of the square is a stable
clamping surface with a variety of
options. In combination with stops
and squares with elongated holes the
height can be adjusted flexibly.
176 177
28 Aluminum profiles & Accessories Aluminum profiles & Accessories 28
Low cost, lightweight, large component clamping tools!
Move large components without a crane or forklift.
280513
280511
a a
c c
b b
Lightweight clamping tools Suitable accessories 4-AR28014120.VL 50 mm Grid elongated hole 1.200 mm 200 mm 50 mm 6,31 kg upon request
280511
280511
c c
a
a
b b
AP280602.N AP280605.N
4-AQ28014050.VL 50 mm Grid elongated hole 500 mm 200 mm 200 mm 5,90 kg upon request
4-AQ28014080.VL 50 mm Grid elongated hole 800 mm 200 mm 200 mm 9,14 kg upon request
4-AQ28014100.VL 50 mm Grid elongated hole 1.000 mm 200 mm 200 mm 11,60 kg upon request
4-AQ28014120.VL 50 mm Grid elongated hole 1.200 mm 200 mm 200 mm 13,85 kg upon request
4-AQ28014150.VL 50 mm Grid elongated hole 1.500 mm 200 mm 200 mm 17,35 kg upon request
4-AQ28014200.VL 50 mm Grid elongated hole 2.000 mm 200 mm 200 mm 23,04 kg upon request
178 = Item produced for stock = Item produced on order Explanations see page 3 179
28 Aluminum profiles & Accessories
c c
d d
a a
b b
2-AP800399 2-AP800399.AT
2-AP800399 Adapter for table connection for aluminum profiles - nitrided upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 280511, 4x AP280528, 2x 800653.1.N (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
150 mm 150 mm 79 mm 15 mm 3,40 kg
2-AP800399.AT Adapter for table connection for aluminum profiles - Aluminum-Titanium upon request
for fastening the profiles on the front side, insert into profile and clamp to table side, for fixing: 2x 280511, 4x AP280528, 2x 800653.1.N (not included in the delivery)
Length: (a) Width: (b) Height: (c) MS: (d) Weight:
150 mm 150 mm 79 mm 15 mm 1,29 kg
MS=Material thickness;
6 6
2-AP280605.N 2-AP280602.N
for using screw clamps in aluminum profiles, for Screw Clamps: 280610.N, 280630.N, 280615.N, 280611.1, 280611.2
Length: (a) Ø: Weight:
80 mm 45 mm 0,54 kg
2-AP280602.N Adapter for screw clamps double - nitrided upon request
for using screw clamps in aluminum profiles, for Screw Clamps: 280610.N, 280630.N, 280615.N, 280611.1, 280611.2
Length: (a) Ø: Weight:
105 mm 45 mm 0,65 kg 25 mm
25 mm
25 mm
25 mm
25 mm
280511 280513
180 = Item produced for stock = Item produced on order Explanations see page 3 181
28 Bolts Clamping bolt without slot 28
14 14
for clamping 2 components, Clamping range approx. 47-53 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
100 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 20,00 kN 6,00 kN 0,56 kg
2-280590.3 Areal Clamping Bolt triple - burnished upon request
for clamping 3 components, Clamping range approx. 72-78 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
125 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 20,00 kN 6,00 kN 0,68 kg
2-280590.4 Areal Clamping Bolt quadruple - burnished upon request
for clamping 4 components, Clamping range approx. 97-103 mm, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
150 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 20,00 kN 6,00 kN 0,80 kg
Different sizes and styles Fast and simple handling Bolt without slot for aluminum profiles SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
Our bolts are made of hardened high-alloy steel The bolts can easily be fixed and loosened by hand or Bolts without an O-ring slot are ideal for use with
for maximum strength. Choose from a wide range with a hex wrench. No additional tools are required. aluminum profiles. Thanks to the smooth bolt body,
of fast clamping bolts, connecting bolts and much The bolt can be cleaned easily at any time. they can be clamped very easily in the aluminum
more. The magnetic clamping bolts are available profiles without tilting. 6
in aluminum.
6
25 mm
25 mm 25 mm
2-280595 2-280595.3 2-280595.4
25 mm 25 mm 25 mm
25 mm 25 mm 25 mm
2-280595 Areal Clamping Flush Mount Bolt double - burnished upon request
for clamping 2 components, countersunk connection of components, Clamping range approx. 47-53 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
Bolt double / Bolt short Bolt triple / Bolt long Bolt quadruple 65 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 10,00 kN 6,00 kN 0,29 kg
2-280595.3 Areal Clamping Flush Mount Bolt triple - burnished upon request
for clamping 3 components, countersunk connection of components, Clamping range approx. 72-78 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
90 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 10,00 kN 6,00 kN 0,41 kg
2-280595.4 Areal Clamping Flush Mount Bolt quadruple - burnished upon request
for clamping 4 components, countersunk connection of components, Clamping range approx. 97-103 mm, MUST NOT be used for connecting tables and U-shaped squares, not suitable for elongated holes
Length: (a) Ø: SK: AM: AM1: ZK: ZK1: Weight:
115 mm 28 mm 200,00 kN 50,00 Nm 20,00 Nm 10,00 kN 6,00 kN 0,52 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; ZK1=Tensile Force Aluminum; Clamping torque dependent on material.
6
10
10
6
6 6
2-280511 Fast Clamping Bolt without slot double - burnished upon request 2-280583 Connecting Bolt with collar double - burnished upon request
for clamping 2 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 2 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: MS: (d) SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
95 mm 28 mm - 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,54 kg 70 mm 28 mm 200,00 kN 25,00 Nm 25,00 Nm 15,00 kN 0,39 kg
2-280513 Fast Clamping Bolt without slot triple - burnished upon request 2-280584 Connecting Bolt with collar triple - burnished upon request
for clamping 3 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 3 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: MS: (d) SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
120 mm 28 mm - 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,65 kg 95 mm 28 mm 200,00 kN 25,00 Nm 25,00 Nm 15,00 kN 0,51 kg
2-280515 Fast Clamping Bolt without slot quadruple - burnished upon request 2-280585 Connecting Bolt with collar quadruple - burnished upon request
for clamping 4 components, recommended for clamping aluminum profiles, without O-ring slot for a smooth surface, MUST NOT be used for connecting tables and U-shaped squares for connecting 4 components, to connect tables, U-squares and aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: MS: (d) SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
145 mm 28 mm - 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,76 kg 120 mm 28 mm 200,00 kN 25,00 Nm 25,00 Nm 15,00 kN 0,63 kg
2-800653.1.N Spacer Ring for Premium Light pack of 4 - nitrided upon request SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
distance between two clamping elements, is required for clamping to material thickness 15 mm with bolt 280511, Scope of delivery: 4 pieces
Length: (a) Ø: MS: (d) SK: AM: AM1: ZK: Weight:
- 40 mm 10 mm - - - - 0,04 kg
MS=Material thickness; SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force Steel; Clamping torque dependent on material.
6 6 6
6
6
6
6
2-AP280528 Flush Mount Bolt without slot double - burnished upon request 2-280524 Fast Clamping Bolt flat without slot double - burnished upon request
for clamping 2 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight for clamping 2 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
69 mm 28 mm 220,00 kN 10,00 Nm 3,00 kN 0,28 kg 74 mm 28 mm 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,36 kg
2-AP280529 Flush Mount Bolt without slot triple - burnished upon request 2-280525 Fast Clamping Bolt flat without slot triple - burnished upon request
for clamping 3 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight for clamping 3 components, minimal protrusion, MUST NOT be used for connecting tables and U-shaped squares, suitable for aluminum profiles, suitable for elongated holes
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
92 mm 28 mm 220,00 kN 10,00 Nm 3,00 kN 0,40 kg 99 mm 28 mm 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,42 kg
2-AP280530 Flush Mount Bolt without slot quadruple - burnished upon request 2-280571 Fast Clamping Bolt adjustable without slot short - burnished upon request
for clamping 4 components, only for clamping aluminum profiles, countersunk connection of components, tighten aluminum parts only hand-tight Clamping dimension 25 – 50 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM1: ZK: Weight: Length: (a) Ø: SK: AM: AM1: ZK: Weight:
117 mm 28 mm 220,00 kN 10,00 Nm 3,00 kN 0,50 kg 115 mm 28 mm 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,67 kg
SK=Shearing Force; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. 2-280573 Fast Clamping Bolt adjustable without slot long - burnished upon request
Clamping dimension 50 – 75 mm, clamping of customized laser cut profiles, suitable for aluminum profiles, tighten aluminum parts only hand-tight, MUST NOT be used for connecting tables and U-shaped squares
184 = Item produced for stock = Item produced on order Explanations see page 3 185
Bolts 28
14
14
6
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
95 mm 28 mm 220,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,54 kg
2-280532 Universal Bolt Comfort short - burnished upon request
for clamping 2 components, Clamping range 45-53 mm, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
100 mm 28 mm 200,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,60 kg
2-280533 Universal Bolt Comfort long - burnished upon request
for clamping 3 components, Clamping range 70-78 mm, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: AM1: ZK: Weight:
125 mm 28 mm 200,00 kN 25,00 Nm 10,00 Nm 25,00 kN 0,70 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material.
14
14
clamping without the use of tools, Clamping range 33-60 mm, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: ZK: Weight:
235 mm 28 mm 220,00 kN - 25,00 kN 0,63 kg
2-280536 Universal Bolt Basic short - burnished upon request
for clamping 2 components, Clamping range 42-57 mm, MUST NOT be used for connecting tables and U-shaped squares, clean boreholes before use, not suitable for aluminum profiles
Length: (a) Ø: SK: AM: ZK: Weight:
84 mm 28 mm 200,00 kN 25,00 Nm 25,00 kN 0,43 kg
2-280537 Universal Bolt Basic long - burnished upon request
for clamping 3 components, Clamping range 67-82 mm, MUST NOT be used for connecting tables and U-shaped squares, clean boreholes before use, not suitable for aluminum profiles
Length: (a) Ø: SK: AM: ZK: Weight:
108 mm 28 mm 200,00 kN 25,00 Nm 25,00 kN 0,55 kg
2-280540 Positioning Bolt - burnished upon request
substitutes a second clamping bolt cost-effectively, MUST NOT be used for connecting tables and U-shaped squares
Length: (a) Ø: SK: AM: ZK: Weight:
70 mm 28 mm - - - 0,40 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
186 = Item produced for stock = Item produced on order Explanations see page 3 187
28 Bolts Bolts 28
10
36
10
10
10
10
10 10 10 24
10 10
2-800560 Connecting Bolt / Siegmund Light <-> Siegmund Light - burnished upon request 2-280560.N Connecting Bolt short - nitrided upon request
to connect Siegmund Light products (15 mm material thickness), not suitable for aluminum profiles for connecting 2 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
26 mm 28 mm 200,00 kN 25,00 Nm - 10,00 kN 0,15 kg 50 mm 28 mm 200,00 kN 25,00 Nm 10,00 kN 0,18 kg
2-800562 Connecting Bolt / Siegmund <-> Siegmund Light - burnished upon request 2-280561 Connecting Bolt long - burnished upon request
to connect Siegmund and Siegmund Light (25 mm and 15 mm material thickness), not suitable for aluminum profiles for connecting 3 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: AM1: ZK: Weight: Length: (a) Ø: SK: AM: ZK: Weight:
40 mm 28 mm 200,00 kN 25,00 Nm - 10,00 kN 0,15 kg 75 mm 28 mm 200,00 kN 25,00 Nm 10,00 kN 0,20 kg
SK=Shearing Force; AM=Tightening Torque Steel; AM1=Tightening Torque Aluminum; ZK=Tensile Force; Clamping torque dependent on material. 2-280562 Connecting Bolt long - burnished upon request
for connecting 4 components, to connect tables and U-squares, not suitable for aluminum profiles, not suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: ZK: Weight:
100 mm 28 mm 200,00 kN 25,00 Nm 10,00 kN 0,34 kg
2-280550.1 Connecting Bolt, hexagonal short - burnished upon request
for connecting 2 components, not suitable for aluminum profiles, suitable for elongated holes, fixed long-term connection
Length: (a) Ø: SK: AM: ZK: Weight:
58 mm 28 mm 200,00 kN 25,00 Nm 20,00 kN 0,40 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
2-800528 Flush Mount Bolt Premium Light <-> Premium Light - burnished upon request 2-280740 Magnetic Clamping Bolt 68 - Aluminum upon request
clamping of 2 components Premium Light (material thickness 15 mm), countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes Length of Shaft 25 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: ZK: Weight: Length: (a) Ø: Weight:
46 mm 31 mm 220,00 kN 25,00 Nm 10,00 kN 0,20 kg 68 mm 28 mm 0,09 kg
2-280528 Flush Mount Bolt short - burnished upon request 2-280740.1 Magnetic Clamping Bolt 93 - Aluminum upon request
for clamping 2 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes Length of Shaft 50 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: ZK: Weight: Length: (a) Ø: Weight:
67 mm 28 mm 220,00 kN 25,00 Nm 10,00 kN 0,30 kg 93 mm 28 mm 0,13 kg
2-280529 Flush Mount Bolt long - burnished upon request 2-280740.2 Magnetic Clamping Bolt 118 - Aluminum upon request
for clamping 3 components, MUST NOT be used for connecting tables and U-shaped squares, countersunk connection of components, not suitable for aluminum profiles, not suitable for elongated holes Length of Shaft 75 mm, clamping without the use of tools, suitable for pressure-sensitive parts or when counterholding is not possible
Length: (a) Ø: SK: AM: ZK: Weight: Length: (a) Ø: Weight:
91 mm 28 mm 220,00 kN 25,00 Nm 10,00 kN 0,41 kg 118 mm 28 mm 0,16 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material. 2-280741 Spacer Ring for Magnetic Bolt - burnished upon request
188 = Item produced for stock = Item produced on order Explanations see page 3 189
28 Clamps & Accessories Clamps & Accessories 28
Innovative solutions for clamping and fixing
workpieces on Siegmund welding tables.
300 mm
300 mm
300 mm
36
0°
Tr 20x4 Tr 20x4 Tr 20x4
280657.1.N 280657.1.N
300 mm
280657.1.N
105-240 mm
50-165 mm 50-160 mm
interchangeable prism, ball diameter spindle 16 mm, stepless rotation from 0°-360°, Vertical Bar reinforced
max. holding force Width: (b) Height: (c) Weight:
5 kN - 310 mm 2,30 kg
2-280615.N Professional Fast Tension Clamp - nitrided upon request
100 mm
110
Accessories available online: 360°
mm
360° 360°
www.siegmund.com/F-clamp28
250 mm
Tr 20x4 280657.1.N
280657.1.N
200 mm
Tr 20x4
280657.1.N
90-130 mm
280653.N
280653.N
280653.N Tr 20x4
250 mm
65-220 mm
interchangeable prism, ball diameter spindle 16 mm, clamping at a 180° angle, fastening with an adjusting ring
max. holding force Width: (b) Height: (c) Weight:
3 kN 220 mm 250 mm 2,30 kg
2-280604 Pipe Clamp Universal - burnished / nitrided upon request
interchangeable prism, ball diameter spindle 16 mm, clamping at an angle of +/- 42°, fastening with an adjusting ring
max. holding force Width: (b) Height: (c) Weight:
3 kN 265 mm 250 mm 2,30 kg
2-280608.N Basic Pipe Clamp 90° - nitrided upon request
interchangeable prism, ball diameter spindle 16 mm, clamping at an angle of 90°, stepless rotation from 0°-360°, fastening with an adjusting ring
max. holding force Width: (b) Height: (c) Weight:
3 kN - 230 mm 1,40 kg
2-009902 Vertical Toggle Clamp upon request
190 = Item produced for stock = Item produced on order Explanations see page 3 191
28 Clamps & Accessories Clamps & Accessories 28
300 mm
300 mm
Tr 20x4
Tr 20x4 90-130 mm
280657.1.N
280657.1.N
50-165 mm 65-105 mm
2-280611.1 Professional Screw Clamp with vertical action toggle upon request 2-280663 Adapter 45° for Screw Clamp 280610.N - burnished / nitrided upon request
Length clamping arm 100 mm, Clamping range 0-100 mm, Mounting in system boreholes for 280610.N, 280612.N, 280625, Acme trapezoidal thread 20 x 4 mm for system 28 screw clamp arbor, usable in every system borehole
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Width: (b) Height: (c) Ø: Weight:
340 mm 30 mm 150 mm 1,20 kg - - 22 mm 30 mm 0,05 kg
2-280707 Quick-Change Clamp 160 upon request 2-280619 Thread Bushing Tr 12x3 - burnished / nitrided upon request
Length clamping arm 160 mm, Clamping range 0-140 mm, Mounting in system boreholes Acme trapezoidal thread 12 x 3 mm for system 16 screw clamp arbor, usable in every system borehole
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Width: (b) Height: (c) Ø: Weight:
360 mm 30 mm 150 mm 1,20 kg - - 23 mm 32 mm 0,07 kg
400 mm
300 mm
250 mm
200 mm
120 mm
140 mm
120 mm
100 mm
2-280616 Fast Tension Clamp, Standard S20 upon request 2-280770 Angle Bushing 45° for clamping pipe upon request
clamping independent of borehole grid for clamping pipe 280750, 280642, also usable with threaded arbor when combined with thread bushing 280618.N, axial distance 40 mm
Length: (a) Width: (b) Weight: Length: (a) Width: (b) Height: (c) Weight:
200 mm 100 mm 1,10 kg 80 mm 40 mm 40 mm 0,32 kg
2-280616.1 Fast Tension Clamp, Standard S25 upon request 2-280771 Angle Bushing 90° for clamping pipe upon request
clamping independent of borehole grid for clamping pipe 280750, 280642, also usable with threaded arbor when combined with thread bushing 280618.N, axial distance 40 mm
Length: (a) Width: (b) Weight: Length: (a) Width: (b) Height: (c) Weight:
250 mm 120 mm 1,50 kg 80 mm 40 mm 40 mm 0,32 kg
2-280616.2 Fast Tension Clamp, Standard S30 upon request 2-280772 Angle Socket 45° for clamping pipe upon request
clamping independent of borehole grid for clamping pipe 280750, 280642, also usable with threaded arbor when combined with thread bushing 280618.N, axial distance 40 mm
Length: (a) Width: (b) Weight: Length: (a) Width: (b) Height: (c) Weight:
300 mm 140 mm 2,30 kg 100 mm 67 mm 40 mm 0,32 kg
2-280616.3 Fast Tension Clamp, Standard S40 upon request 2-280773 Angle Socket 90° for clamping pipe upon request
clamping independent of borehole grid for clamping pipe 280750, 280642, also usable with threaded arbor when combined with thread bushing 280618.N, axial distance 40 mm
Length: (a) Width: (b) Weight: Length: (a) Width: (b) Height: (c) Weight:
400 mm 120 mm 2,50 kg 85 mm 85 mm 40 mm 0,39 kg
192 = Item produced for stock = Item produced on order Explanations see page 3 193
28 Clamps & Accessories Clamps & Accessories 28
2-280657.1.N Prism for Screw Clamps - nitrided upon request 2-280650 Duo Prism Ø 40 - burnished / nitrided upon request
for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
24 mm 40 mm 0,09 kg 35 mm 40 mm 0,15 kg
2-280658.E Prism for Screw Clamps - Stainless Steel upon request 2-280650.A Duo Prism Ø 40 - Aluminum upon request
for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps, for scratch-resistant surfaces (rust prevention) for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
21 mm 40 mm 0,10 kg 35 mm 40 mm 0,05 kg
2-280659.PA Prism for Screw Clamps - Polyamide upon request 2-280650.PA Duo Prism Ø 40 - Polyamide upon request
for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps, for scratch-sensitive surfaces for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps, for scratch-sensitive surfaces
Height: (c) Ø: Weight: Height: (c) Ø: Weight:
24 mm 40 mm 0,01 kg 35 mm 40 mm 0,02 kg
2-280661 Pressure Ball Blank for Screw Clamps - Polished upon request
for spindle with ball diameter 16 mm, compatible with 28 mm boreholes and clamps, according to customer specifications
Height: (c) Ø: Weight:
30 mm 40 mm 0,19 kg
2-280660 Pressure Ball for Screw Clamps - burnished / nitrided upon request 2-280210 Clamping Bridge 2P for Screw Clamps upon request
for spindle with ball diameter 16 mm, only suitable for clamps, for clamping in corners or grooves 2 clamping spots simultaneously, interchangeable prism, Delivery includes: 1 clamping bridge, 2 ball pins, 2 prisms
Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
20 mm 35 mm 0,07 kg 170 mm 35 mm 20 mm 0,80 kg
2-280660.E Pressure Ball for Screw Clamps - Stainless Steel upon request 2-280211 Clamping Bridge 3P for Screw Clamps upon request
for spindle with ball diameter 16 mm, only suitable for clamps, for scratch-resistant surfaces (rust prevention), for clamping in corners or grooves 3 clamping points simultaneously, interchangeable prism, Delivery includes: 1 clamping bridge, 3 ball pins, 3 prisms
Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
20 mm 35 mm 0,07 kg 170 mm 35 mm 20 mm 1,00 kg
2-280660.PA Pressure Ball for Screw Clamps - Polyamide upon request
for spindle with ball diameter 16 mm, only suitable for clamps, for scratch-sensitive surfaces, for clamping in corners or grooves
Height: (c) Ø: Weight:
20 mm 35 mm 0,01 kg
194 = Item produced for stock = Item produced on order Explanations see page 3 195
28 Prisms & Supports Prisms & Supports 28
Stable surfaces for pipes and components of all
kinds with prisms and supports from Siegmund.
c c c c c c
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,20 kg
2-280648.1.A Prism Ø 50 135° with screwed-in collar - Aluminum upon request
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,07 kg
2-280648.1.PA Prism Ø 50 135° with screwed-in collar - Polyamide upon request
M16 thread for e.g. prism extensions Item No. 280649, for scratch-sensitive surfaces, for pipes up to Ø 80 mm
Working with pipes Different materials Extend and balance Height: (c) Ø: Weight:
20 mm 50 mm 0,03 kg
Prisms create stable support surfaces for pipes of all Each prism is available in the version Supports can be used as extensions for 2-280645.1 Vario Prism Ø 50 90° / 120° with screwed-in collar - burnished / nitrided upon request
kinds. Each prism is supplied with a screwed-in collar nitrided (protected against weld spatter), prisms or other components such as clamps M16 thread for e.g. prism extensions Item No. 280649, for round and square pipes up to Ø 50 mm
that enables it to be attached to the system boreholes. aluminum (stainless steel processing) or to compensate for height differences. Height: (c) Ø: Weight:
The collar can simply be unscrewed for free positioning, and polyamide (aluminum and stainless 20 mm 50 mm 0,20 kg
regardless of the hole grid. Choose from different steel processing). 2-280645.1.A Vario Prism Ø 50 90° / 120° with screwed-in collar - Aluminum upon request
diameters and support angles. M16 thread for e.g. prism extensions Item No. 280649, for round and square pipes up to Ø 50 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,07 kg
2-280645.1.PA Vario Prism Ø 50 90° / 120° with screwed-in collar - Polyamide upon request
M16 thread for e.g. prism extensions Item No. 280649, for scratch-sensitive surfaces, for round and square pipes up to Ø 50 mm
Height: (c) Ø: Weight:
20 mm 50 mm 0,03 kg
c c c
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,52 kg
2-280651.1.A Prism Ø 60 135° with screwed-in collar - Aluminum upon request
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,18 kg
2-280651.1.PA Prism Ø 60 135° with screwed-in collar - Polyamide upon request
M16 thread for e.g. prism extensions Item No. 280649, for scratch-sensitive surfaces, for pipes up to Ø 80 mm
Height: (c) Ø: Weight:
30 mm 60 mm 0,08 kg
196 = Item produced for stock = Item produced on order Explanations see page 3 197
28 Prisms & Supports Prisms & Supports 28
a
90° 90° 90°
157° 157° 157°
a
c c c c c c
a
a
2-280647.1 2-280647.1.A 2-280647.1.PA 2-280652.1 2-280652.1.A 2-280652.1.PA 2-280649 2-280649.1 2-280649.2 2-280649.3
2-280647.1 Prism Ø 80 90° with screwed-in collar - burnished / nitrided upon request 2-280649 Prism Extension 25 - burnished upon request
M16 thread for e.g. prism extensions Item No. 280649, for round and square pipes up to Ø 100 mm compatible with prisms, support set 280821 and screw support 280822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 1,01 kg 25 mm 28 mm 0,11 kg
2-280647.1.A Prism Ø 80 90° with screwed-in collar - Aluminum upon request 2-280649.1 Prism Extension 50 - burnished upon request
M16 thread for e.g. prism extensions Item No. 280649, for round and square pipes up to Ø 100 mm compatible with prisms, support set 280821 and screw support 280822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 0,55 kg 50 mm 28 mm 0,22 kg
2-280647.1.PA Prism Ø 80 90° with screwed-in collar - Polyamide upon request 2-280649.2 Prism Extension 100 - burnished upon request
M16 thread for e.g. prism extensions Item No. 280649, for scratch-sensitive surfaces, for round and square pipes up to Ø 100 mm compatible with prisms, support set 280821 and screw support 280822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
40 mm 80 mm 0,19 kg 100 mm 28 mm 0,45 kg
2-280652.1 Prism Ø 120 157° with screwed-in collar - burnished / nitrided upon request 2-280649.3 Prism Extension 150 - burnished upon request
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 400 mm compatible with prisms, support set 280821 and screw support 280822
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
30 mm 120 mm 1,70 kg 150 mm 28 mm 0,69 kg
2-280652.1.A Prism Ø 120 157° with screwed-in collar - Aluminum upon request
M16 thread for e.g. prism extensions Item No. 280649, for pipes up to Ø 400 mm
Height: (c) Ø: Weight:
30 mm 120 mm 0,70 kg
2-280652.1.PA Prism Ø 120 157° with screwed-in collar - Polyamide upon request
M16 thread for e.g. prism extensions Item No. 280649, for scratch-sensitive surfaces, for pipes up to Ø 400 mm
Height: (c) Ø: Weight:
30 mm 120 mm 0,30 kg
c
c 2-280669.N 2-280821 280821.1 2-280821.2
2-280669.N Prism Collar Screw with countersunk bolt - nitrided upon request
for holding round and square pipes up to Ø 80 mm, clamping with bolts compensation of 1-100 mm height difference, with M10 thread
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
70 mm 80 mm 1,40 kg 125 mm 50 mm 1,95 kg
2-280822 Screw Support Ø 80 - burnished upon request
280821.1 Tower for Supports - burnished upon request
vernier adjustment height in a range of 75-110 mm, combinable with support set 280821 and prism extensions variable support surface, with M10 thread
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
75 - 110 mm 80 mm 2,30 kg 125 mm 50 mm 0,60 kg
2-280824 Support height adjustable with scale - burnished upon request
2-280821.2 Washer Set upon request
incl. Set screw, height infinite adjustable between 20-105 mm, Set screw for connecting with prisms gradation of discs: 1 / 2 / 3 / 4 / 5 / 10 / 20 / 40 / 50 mm incl. 1/10" disc 2,54 mm
Height: (c) Ø: Weight: Length: (a) Ø: Weight:
144 mm 50 mm 0,87 kg - 50 mm 1,35 kg
198 = Item produced for stock = Item produced on order Explanations see page 3 199
28 Prisms & Supports Prisms & Supports 28
Ø Ø
Ø
c
c a a a
2-280646.1 Vertical Pipe 225 upon request 2-280175 Spacer 100 Ø 50 upon request
for Multi Clamp Tower modular with thread bushing 280825 adaptable in squares and stops, M16 thread
Height: (c) Ø: Weight: Length: (a) Height: (c) Ø: Weight:
225 mm 57 mm 1,70 kg 100 mm - 50 mm 0,52 kg
2-280646.2 Vertical Pipe 475 upon request 2-280176 Spacer 100 Ø 75 upon request
for Multi Clamp Tower modular with thread bushing 280825 adaptable in squares and stops, M16 thread
Height: (c) Ø: Weight: Length: (a) Height: (c) Ø: Weight:
475 mm 57 mm 2,94 kg 100 mm - 75 mm 0,92 kg
2-280646.3 Vertical Pipe 725 upon request 2-280177 Spacer 100 Ø 100 upon request
for Multi Clamp Tower modular with thread bushing 280825 adaptable in squares and stops, M16 thread
Height: (c) Ø: Weight: Length: (a) Height: (c) Ø: Weight:
725 mm 57 mm 4,24 kg 100 mm - 100 mm 1,42 kg
2-280646.4 Vertical Pipe 975 upon request 2-280825 Thread Bushing for M16 thread - burnished upon request
Ø Ø Ø
a a a
c c
b b
a a
280646.5 Plate, Large upon request 2-280175.1 Spacer 150 Ø 50 upon request
for Multi Clamp Tower modular with thread bushing 280825 adaptable in squares and stops, M16 thread
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
150 mm 100 mm 25 mm 2,60 kg 150 mm 50 mm 0,60 kg
280646 Plate, Small upon request 2-280176.1 Spacer 150 Ø 75 upon request
for Multi Clamp Tower modular with thread bushing 280825 adaptable in squares and stops, M16 thread
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
120 mm 120 mm 25 mm 2,23 kg 150 mm 75 mm 1,00 kg
280617.5H Cast Iron Cross incl. Handwheel upon request 2-280177.1 Spacer 150 Ø 100 upon request
for Multi Clamp Tower modular, Compatible horizontal bars: 280638, 280638.1.N, 280638.2.N with thread bushing 280825 adaptable in squares and stops, M16 thread
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
104 mm 80 mm 56 mm 1,27 kg 150 mm 100 mm 1,50 kg
200 = Item produced for stock = Item produced on order Explanations see page 3 201
28 Accessories Accessories 28
Siegmund Accessories – practical solutions
for making work easier every day.
c
c
a b
b a
b b
c c
a a
b a
installation to the welding table with bolts or with screws to the wall
Length: (a) Width: (b) Height: (c) Ø: Weight:
800 mm 100 mm 800 mm - 22,50 kg
2-280930 Module for Tool Wall - powder coated finish upon request
for Screw Clamp / Prisms / Bolts, back board not included in the delivery
Length: (a) Width: (b) Height: (c) Ø: Weight:
500 mm 100 mm 110 mm 28 mm 2,20 kg
2-280931 Module for Tool Wall without Sleeves - powder coated finish upon request
202 = Item produced for stock = Item produced on order Explanations see page 3 203
28 Accessories Accessories 28
c
c
a
b
2-280980 Protective Welding Wall upon request 2-280820 Brush Ø 30 with protecting cover upon request
mounting with 2 bolts (16: 000520, 22: 002822, 28: 280511), production-related not scratch proof, Custom color varnish available against surcharge for cleaning boreholes
Length: (a) Width: (b) Height: (c) Weight: Ø: Weight:
1.600 mm 50 mm 800 mm 23,00 kg 30 mm 0,06 kg
2-000810 Ground Connection Comfort upon request 2-280820.10 Brush Ø 30 for drill bit / 10 piece pack upon request
guarantees 100% contact to the welding table, Mounting in system boreholes, Load up to 500 ampere, Cable cross section 70-95 mm². for cleaning boreholes
Length: (a) Width: (b) Height: (c) Weight: Ø: Weight:
- - - 0,66 kg 30 mm 0,06 kg
2-280920 Burner Holder - burnished upon request
2-280852.1 Hex wrench Size 6 upon request 2-000830.N Shipping Bracket with Fastening Plate - nitrided upon request
yellow 1800 kg load-bearing capacity (with 2x 280511), 1000 kg load-bearing capacity (with 2x 002822), for a safe transportation of the welding tables and heavy Siegmund components, consider further instructions for use for the article online!
Weight: Length: (a) Width: (b) Height: (c) Weight:
0,09 kg 150 mm 150 mm 25 mm 4,70 kg
2-280852 Hex wrench Size 6 upon request 2-000830.N.T1 Mounting Plate 150x150x25 for Shipping Bracket upon request
red
Weight: Length: (a) Width: (b) Height: (c) Weight:
0,50 kg 150 mm 150 mm 25 mm 3,90 kg
2-280854 Hex wrench Size 14 upon request 2-000831 Shipping Bracket without Fastening Plate upon request
2500 kg load-bearing capacity (with 2x 280511), 1000 kg load-bearing capacity (with 2x 002822), 700 kg load-bearing capacity (with 2x 160511), for a safe transportation of the welding tables and heavy Siegmund components, consider further instructions for use for the article online!
204 = Item produced for stock = Item produced on order Explanations see page 3 205
28 22 16 Table press Table press 16
The Siegmund table press can effortlessly reclaim bent
steel shapes and relieve internal material stress.
compressive force of 2,5 tons, total stroke 60 mm, operating force 330 N, fixation always required in two places
Length: (a) Width: (b) Height: (c) Ø: Weight:
- - - - 6,50 kg
2-160702 Special Square System 16 upon request
for rotatable fastening of the counter block in the boreholes, for fixing: 160515
Length: (a) Width: (b) Height: (c) Ø: Weight:
48 mm - - 40 mm 0,26 kg
Corners can be pressed using a pre-shaped The shaped pipe former can bend or straighten Safe vertical operation is possible when
aluminum former to avoid damage to the weld seam. pipes up to 42 mm diameter. The correct sequential the press is fixed in two places using the
process will provide a clean mark free result. incorporated turret head bolt.
206 = Item produced for stock = Item produced on order Explanations see page 3 207
22 Table press Table press 28
2-220780 Table press System 22 upon request 2-280780 Table press System 28 upon request
compressive force of 2,5 tons, total stroke 60 mm, operating force 330 N, fixation always required in two places compressive force of 2,5 tons, total stroke 60 mm, operating force 330 N, fixation always required in two places
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Ø: Weight:
- - - - 6,70 kg - - - - 6,70 kg
2-220702 Special Square System 22 upon request 2-280702 Special Square System 28 upon request
as an extension and vertical fixation of the press as an extension and vertical fixation of the press
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Ø: Weight:
195 mm 60 mm 60 mm - 1,66 kg 195 mm 60 mm 60 mm - 1,87 kg
2-220701 Plug socket upon request 2-280701 Plug socket upon request
for rotatable fastening of the counter block in the boreholes, for fixing: 220515 for rotatable fastening of the counter block in the boreholes, for fixing: 280513
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Ø: Weight:
54 mm - - 40 mm 0,24 kg 50 mm - - 40 mm 0,11 kg
Included in the set: 1x 000701.PA, 1x 000701.AL, 1x 220702 Included in the set: 1x 000701.PA, 1x 000701.AL, 1x 280702
Weight: Weight:
Special offer price Special offer price
1,77 kg 1,98 kg
2-220782.1 Pipe straightening set for Ø 21,4 upon request 2-280782.1 Pipe straightening set for Ø 21,4 upon request
Included in the set: 1x 000703.1, 1x 000704.1, 2x 000705.1, 2x 220701 Included in the set: 1x 000703.1, 1x 000704.1, 2x 000705.1, 2x 280701
Weight: Weight:
Special offer price Special offer price
1,38 kg 1,12 kg
2-220782.2 Pipe straightening set for Ø 33,7 upon request 2-280782.2 Pipe straightening set for Ø 33,7 upon request
Included in the set: 1x 000703.2, 1x 000704.2, 2x 000705.2, 2x 220701 Included in the set: 1x 000703.2, 1x 000704.2, 2x 000705.2, 2x 280701
Weight: Weight:
Special offer price Special offer price
1,25 kg 0,99 kg
2-220782.3 Pipe straightening set for Ø 42,4 upon request 2-280782.3 Pipe straightening set for Ø 42,4 upon request
Included in the set: 1x 000703.3, 1x 000704.3, 2x 000705.3, 2x 220701 Included in the set: 1x 000703.3, 1x 000704.3, 2x 000705.3, 2x 280701
Weight: Weight:
Special offer price Special offer price
1,15 kg 0,89 kg
208 = Item produced for stock = Item produced on order Explanations see page 3 209
28 22 16 Table press Table press 16 22 28
2-000701.AL Thrust Piece Aluminum upon request 2-000704.1 Pipe Bending Plug for Ø 21,4 - POM-C upon request
recommended for steel work for bending and straightening pipes, for pipes Ø 21,4 mm
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
- - 15 mm 55 mm 0,08 kg 120 mm 35 mm 60 mm 0,24 kg
2-000701.PA Thrust Piece Polyamide upon request 2-000704.2 Pipe Bending Plug for Ø 33,7 - POM-C upon request
recommended for applications with stainless steel for bending and straightening pipes, for pipes Ø 33,7 mm
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
- - 15 mm 55 mm 0,03 kg 120 mm 35 mm 60 mm 0,21 kg
2-000706 Stamp 90° with extention pipe upon request 2-000704.3 Pipe Bending Plug for Ø 42,4 - POM-C upon request
for pressing in corners without damaging the weld seam for bending and straightening pipes, for pipes Ø 42,4 mm
Length: (a) Width: (b) Height: (c) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
168 mm 50 mm 50 mm - 0,82 kg 120 mm 35 mm 60 mm 0,18 kg
2-000703.1 Pipe Adapter for Ø 21,4 - POM-C upon request 2-000705.1 Counter block for Ø 21,4 - POM-C upon request
for straightening pipes, for pipes Ø 21,4 mm as a counter block for bending and straightening pipes, Plug socket required for fastening
Length: (a) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
35 mm 55 mm 0,08 kg 60 mm 114 mm 55 mm 0,29 kg
2-000703.2 Pipe Adapter for Ø 33,7 - POM-C upon request 2-000705.2 Counter block for Ø 33,7 - POM-C upon request
for straightening pipes, for pipes Ø 33,7 mm as a counter block for bending and straightening pipes, Plug socket required for fastening
Length: (a) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
35 mm 55 mm 0,06 kg 60 mm 102 mm 55 mm 0,25 kg
2-000703.3 Pipe Adapter for Ø 42,4 - POM-C upon request 2-000705.3 Counter block for Ø 42,4 - POM-C upon request
for straightening pipes, for pipes Ø 42,4 mm as a counter block for bending and straightening pipes, Plug socket required for fastening
Length: (a) Ø: Weight: Length: (a) Width: (b) Height: (c) Weight:
35 mm 55 mm 0,05 kg 60 mm 93 mm 55 mm 0,22 kg
210 = Item produced for stock = Item produced on order Explanations see page 3 211
28 22 16 Sub Table Box Sub Table Box 16 22 28
A lockable storage space for safe keeping of tooling,
accessories and personal effects.
b b b
b c
c c
c
a a a a
2-004220 Drawer with clip rail, 60 mm for Sub Table Box lockable upon request
180 mm 180 mm
a
b
powder coated finish, Storage space at your welding table, 360 mm space for drawers, Table size 1,0 x 0,5 m: incompatible, lockable, incl. two keys
Length: (a) Width: (b) Height: (c) TF: Weight:
630 mm 510 mm 420 mm 100 kg 28,50 kg
2-160990.1 Set Sub Table Box lockable incl. 2 drawers (2x 004230) upon request
powder coated finish, Storage space at your welding table, Table size 1,0 x 0,5 m: incompatible, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 42,50 kg
2-160990.2 Set Sub Table Box lockable incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request
powder coated finish, Storage space at your welding table, Table size 1,0 x 0,5 m: incompatible, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 47,50 kg
TF=Load capacity;
212 = Item produced for stock = Item produced on order Explanations see page 3 213
28 22 16 Sub Table Box Sub Table Box 16 22 28
System 16 PLUS System 22
60 mm 60 mm
180 mm 120 mm 180 mm 120 mm
c c
2-162990 Sub Table Box lockable for PLUS Table upon request 2-220990 Sub Table Box lockable upon request
powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
630 mm 510 mm 420 mm 100 kg 28,00 kg 630 mm 510 mm 420 mm 100 kg 30,00 kg
2-162990.1 Set Sub Table Box lockable for PLUS Table incl. 2 drawers (2x 004230) upon request 2-220990.1 Set Sub Table Box lockable incl. 2 drawers (2x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price Special offer price
630 mm 510 mm 420 mm 100 kg 42,00 kg 630 mm 510 mm 420 mm 100 kg 44,00 kg
2-162990.2 Set Sub Table Box lockable for PLUS Table incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request 2-220990.2 Set Sub Table Box lockable incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price Special offer price
630 mm 510 mm 420 mm 100 kg 47,00 kg 630 mm 510 mm 420 mm 100 kg 49,00 kg
TF=Load capacity; TF=Load capacity;
60 mm 60 mm
180 mm 120 mm 180 mm 120 mm
c c
2-161990 Sub Table Box lockable for Basic upon request 2-222990 Sub Table Box lockable for PLUS Table upon request
powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
630 mm 510 mm 420 mm 100 kg 28,50 kg 630 mm 510 mm 420 mm 100 kg 29,90 kg
2-161990.1 Set Sub Table Box lockable for Basic incl. 2 drawers (2x 004230) upon request 2-222990.1 Set Sub Table Box lockable for PLUS Table incl. 2 drawers (2x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price Special offer price
630 mm 510 mm 420 mm 100 kg 42,50 kg 630 mm 510 mm 420 mm 100 kg 43,90 kg
2-161990.2 Set Sub Table Box lockable for Basic incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request 2-222990.2 Set Sub Table Box lockable for PLUS Table incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight: Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price Special offer price
630 mm 510 mm 420 mm 100 kg 47,50 kg 630 mm 510 mm 420 mm 100 kg 48,90 kg
TF=Load capacity; TF=Load capacity;
214 = Item produced for stock = Item produced on order Explanations see page 3 215
28 22 16 Sub Table Box
60 mm
180 mm 120 mm
c
180 mm 180 mm
a
b
powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys, Compatible with PLUS tables
Length: (a) Width: (b) Height: (c) TF: Weight:
630 mm 510 mm 420 mm 100 kg 30,00 kg
2-280990.1 Set Sub Table Box lockable incl. 2 drawers (2x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, Compatible with PLUS tables, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 44,00 kg
2-280990.2 Set Sub Table Box lockable incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, Compatible with PLUS tables, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 49,00 kg
TF=Load capacity;
System 28 BASIC
60 mm
180 mm 120 mm
c
180 mm 180 mm
a
b
powder coated finish, Storage space at your welding table, 360 mm space for drawers, lockable, incl. two keys
Length: (a) Width: (b) Height: (c) TF: Weight:
630 mm 510 mm 420 mm 100 kg 31,00 kg
2-281990.1 Set Sub Table Box lockable for Basic incl. 2 drawers (2x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 45,00 kg
2-281990.2 Set Sub Table Box lockable for Basic incl. 3 drawers (1x 004220, 1x 004225, 1x 004230) upon request
powder coated finish, Storage space at your welding table, lockable, incl. two keys, delivered pre-assembled
Length: (a) Width: (b) Height: (c) TF: Weight:
Special offer price
630 mm 510 mm 420 mm 100 kg 50,00 kg
TF=Load capacity;
216 = Item produced for stock = Item produced on order Explanations see page 3 217
28 22 16 Bench vices Pneumatic Clamps 16 22 28
2-004300 Bench vice 100 for System 16 / 22 / 28 - with 16 mm boreholes upon request 0-000850 Pneumatic Cylinder, short Form incl. Adapter System 16 upon request
Jaw width 100 mm, Opening stroke 135 mm, Mounting: System 16: 2x 160511, System 22: 2x 160513 + 2x 000541, System 28: 2x 160511 + 2x 000545 for automated clamping, mounted in borehole with adapter, lifting range 25 mm or 50 mm, depending on pressure cylinder
Weight: Force Weight:
9,50 kg F = 650 N at 8 bar 0,90 kg
2-004302 Bench vice 125 for System 28 - with 28 mm boreholes upon request 0-000851 Pneumatic Cylinder, short Form incl. Adapter System 28 upon request
Jaw width 125 mm, Opening stroke 140 mm, Mounting: System 16: 2x 160511 + 2x 000546, System 22: 2x 220513 + 2x 000544, System 28: 2x 280511 for automated clamping, mounted in borehole with adapter, lifting range 25 mm or 50 mm, depending on pressure cylinder
Weight: Force Weight:
13,50 kg F = 650 N at 8 bar 0,93 kg
2-164302.Set Set for System 16: Bench vice 125 incl. 2x Reduction Bushing 000546 upon request 0-000855 Pneumatic Cylinder, long form for System 28 upon request
Jaw width 125 mm, Opening stroke 140 mm, Mounting: 2x 160511 for automated clamping, mounted in thread holes with threaded bushing system 28, lifting range 25 mm or 50 mm, depending on pressure cylinder
Weight: Force Weight:
Special offer price
13,60 kg F = 350 N at 8 bar 0,80 kg
2-224302.Set Set for System 22: Bench vice 125 incl. 2x Reduction Bushing 000544 upon request 0-000860 Manifold 8 Outlets upon request
Jaw width 125 mm, Opening stroke 140 mm, Mounting: 2x 220513 for automated clamping, connection between pneumatic cylinder and compressor, operating pressure of 1-10 bar
Weight: Weight:
Special offer price
13,70 kg 0,14 kg
2-000914.8 Special offer CleanBasic 8x 1 liter spray bottle upon request 2-000942 Oilstone 150x50x25 upon request
water-based cleaner, for daily table cleaning, prevents rusting, safety data sheet available online to maintain and equalize unevenness on the table surface, suitable for non-nitrided welding tables and accessories
Weight: Length: (a) Width: (b) Height: (c) Weight:
Special offer price
8,80 kg 150 mm 50 mm 25 mm 0,42 kg
2-000915.6 Special offer CleanBasic 6x 5 liter upon request 2-000940 Oilstone 200x50x25 upon request
water-based cleaner, for daily table cleaning, prevents rusting, safety data sheet available online to maintain and equalize unevenness on the table surface, suitable for non-nitrided welding tables and accessories
Weight: Length: (a) Width: (b) Height: (c) Weight:
Special offer price
31,20 kg 200 mm 50 mm 25 mm 0,56 kg
2-000924.8 Special offer Anti-Spatter Liquid with Corrosion Protection 8x 1 liter spray bottle upon request 2-000914 CleanBasic 1 liter spray bottle upon request
non-flammable, water soluble Anti-Spatter, prevents the welding table from welding spatter burn-in, safety data sheet available online water-based cleaner, for daily table cleaning, prevents rusting, safety data sheet available online
Weight: Length: (a) Width: (b) Height: (c) Weight:
Special offer price
8,80 kg - - - 1,10 kg
2-000926.6 Special offer Anti-Spatter Liquid with Corrosion Protection 6x 5 liter upon request 2-000915 CleanBasic 5 liter upon request
non-flammable, water soluble Anti-Spatter, prevents the welding table from welding spatter burn-in, safety data sheet available online water-based cleaner, for daily table cleaning, prevents rusting, safety data sheet available online
Weight: Length: (a) Width: (b) Height: (c) Weight:
Special offer price
31,20 kg - - - 5,20 kg
2-000924 Anti-Spatter Liquid with Corrosion Protection 1 liter spray bottle upon request
non-flammable, water soluble Anti-Spatter, prevents the welding table from welding spatter burn-in, safety data sheet available online
Weight:
1,10 kg
2-000929 Anti-Spatter Liquid with Corrosion Protection 1 liter pump bottle upon request
non-flammable, water soluble Anti-Spatter, prevents the welding table from welding spatter burn-in, safety data sheet available online
Weight:
1,10 kg
2-000926 Anti-Spatter Liquid with Corrosion Protection 5 liter upon request
non-flammable, water soluble Anti-Spatter, prevents the welding table from welding spatter burn-in, safety data sheet available online
Weight:
5,20 kg
5
4
s1 4
s1 s1
c c
c
s2 s2 s2
b b
a a b
a
2-000780 Duo Magnet Clamping Block 5 upon request 2-000520 Combination Fast Clamping Bolt short 28 -> 16 - burnished upon request
Retention force 5 kN, flexible clamping on steel surfaces without interference contours (e.g. Siegmund welding table), with hexagon socket (Size 8) for mounting components from large systems on smaller systems, MUST NOT be used for connecting tables and U-shaped squares
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
120 x 57 mm 136 x 64 mm 143 mm 64 mm 71 mm 3,90 kg 75 mm 40 mm 55,00 kN 10,00 Nm 10,00 kN 0,32 kg
2-000781 Duo Magnet Clamping Block 7 upon request 2-002822 Combination Fast Clamping Bolt short 28 -> 22 - burnished upon request
Retention force 7 kN, flexible clamping on steel surfaces without interference contours (e.g. Siegmund welding table), with hexagon socket (Size 8) for mounting components from large systems on smaller systems, MUST NOT be used for connecting tables and U-shaped squares
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
156 x 57 mm 172 x 64 mm 178 mm 64 mm 71 mm 4,90 kg 88 mm 40 mm 130,00 kN 15,00 Nm 15,00 kN 0,45 kg
2-000782 Duo Magnet Clamping Block 10 upon request 2-002216 Combination Fast Clamping Bolt short 22 -> 16 - burnished upon request
Retention force 10 kN, flexible clamping on steel surfaces without interference contours (e.g. Siegmund welding table), with hexagon socket (Size 8) for mounting components from large systems on smaller systems, MUST NOT be used for connecting tables and U-shaped squares
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
162 x 76 mm 178 x 87 mm 184 mm 87 mm 88 mm 8,80 kg 71 mm 35 mm 55,00 kN 10,00 Nm 10,00 kN 0,28 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
10
10
10
6 10 6
2-000780.Set Special offer Duo Magnet Clamping Block 5 upon request 2-000562 Connecting Bolt 28 <-> 16 - burnished upon request
delivery contents: 2x Duo Magnet Clamping Block + 1x Hex wrench to connect tables of different systems, to connect components through boreholes cross-system, not suitable for aluminum profiles
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
Special offer price
120 x 57 mm 136 x 64 mm 143 mm 64 mm 71 mm 7,90 kg 34 mm 32 mm 50,00 kN 15,00 Nm 4,00 kN 0,12 kg
2-000781.Set Special offer Duo Magnet Clamping Block 7 upon request 2-028022 Connecting Bolt 28 <-> 22 - burnished upon request
delivery contents: 2x Duo Magnet Clamping Block + 1x Hex wrench to connect tables of different systems, to connect components through boreholes cross-system, not suitable for aluminum profiles
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
Special offer price
156 x 57 mm 172 x 64 mm 178 mm 64 mm 71 mm 9,90 kg 36 mm 32 mm 120,00 kN 15,00 Nm 6,00 kN 0,11 kg
2-000782.Set Special offer Duo Magnet Clamping Block 10 upon request 2-022016 Connecting Bolt 22 <-> 16 - burnished upon request
delivery contents: 2x Duo Magnet Clamping Block + 1x Hex wrench to connect tables of different systems, to connect components through boreholes cross-system, not suitable for aluminum profiles
Clamping surface (s1) Clamping surface (s2) Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: SK: AM: ZK: Weight:
Special offer price
162 x 76 mm 178 x 87 mm 184 mm 87 mm 88 mm 17,70 kg 27 mm 27 mm 20,00 kN 15,00 Nm 4,00 kN 0,06 kg
SK=Shearing Force; AM=Tightening Torque Steel; ZK=Tensile Force; Clamping torque dependent on material.
222 = Item produced for stock = Item produced on order Explanations see page 3 223
28 22 16 Connecting Elements Connecting Elements 16 22 28
2-000570 Adapter Plate 28 -> 16 - burnished / nitrided upon request 2-000544 Reduction Bushing 28 -> 22 - burnished upon request
cross-system mounting of clamps, mounting with bolts long clamping bolt required, for clamping components from large systems on smaller systems, fixed inside the component, suitable for elongated holes
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
150 mm 50 mm 35 mm 0,94 kg 35 mm 36 mm 0,10 kg
2-000571.N Adapter Plate 28 -> 22 - nitrided upon request 2-000546 Reduction Bushing 28 -> 16 - burnished upon request
cross-system mounting of clamps, mounting with bolts for clamping components from large systems on smaller systems, fixed inside the component, suitable for elongated holes
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
150 mm 50 mm 35 mm 1,09 kg 29 mm 36 mm 0,07 kg
2-000572.N Adapter Plate 22 -> 16 - nitrided upon request 2-000542 Reduction Bushing 22 -> 16 - burnished upon request
cross-system mounting of clamps, mounting with bolts long clamping bolt required, for clamping components from large systems on smaller systems, fixed inside the component, suitable for elongated holes
Length: (a) Width: (b) Height: (c) Weight: Length: (a) Ø: Weight:
150 mm 50 mm 25 mm 0,83 kg 23 mm 31 mm 0,05 kg
2-000545 Reduction Bushing 16 -> 28 - burnished upon request 2-000547 Adapter Sleeve 16 -> 28 - burnished upon request
for mounting components from small systems on larger systems, not suitable for elongated holes attachment of components in larger system, not suitable for clamping with clamping bolts
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
24 mm 32 mm 0,05 kg 40 mm 31 mm 0,12 kg
2-000541 Reduction Bushing 16 -> 22 - burnished upon request 2-000549 Adapter Sleeve 22 -> 28 - burnished upon request
long clamping bolt required, for mounting components from small systems on larger systems, not suitable for elongated holes attachment of components in larger system, not suitable for clamping with clamping bolts
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
24 mm 27 mm 0,04 kg 25 mm 30 mm 0,04 kg
2-000543 Reduction Bushing 22 -> 28 - burnished upon request 2-000548 Adapter Sleeve 16 -> 22 - burnished upon request
long clamping bolt required, for mounting components from small systems on larger systems, not suitable for elongated holes attachment of components in larger system, not suitable for clamping with clamping bolts
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
36 mm 32 mm 0,08 kg 18 mm 24 mm 0,02 kg
224 = Item produced for stock = Item produced on order Explanations see page 3 225
28 22 16 Flanges Flanges 16 22 28
a a a a
2-280250.P Clamping Plate 150 Ibs with Fixing Bolt - nitrided upon request 2-280220.P Clamping Plate 550 for DIN Flanges with Fixing Bolt - nitrided upon request
For flanges DIN 2632 / 2633 nominal widths DN 15 - DN 400, flanges DIN 2634 / 2635 nominal widths DN 50 - DN 300. delivery contents: 2x 280222, 2x 280223, 2x 280224, 2x 280225, 2x 280226, 2x 280227, required for system 16: 000562 / 000520 / 000546,
for flange US standard, ANSI / ASME B 16,5 150 lbs, from 1/2" to 8", delivery contents: 2x 280255, 2x 280256, 2x 280257, required for system 16: 000562 / 000520 / 000546, required for system 22: 028022 / 002822 / 000544 required for system 22: 028022 / 002822 / 000544
Length: (a) Width: (b) Ø: MS: (d) Weight: Length: (a) Width: (b) Ø: MS: (d) Weight:
350 mm 250 mm - 25 mm 14,00 kg 550 mm 350 mm - 25 mm 30,00 kg
2-280251.P Clamping Plate 300 Ibs with Fixing Bolt - nitrided upon request 2-280221.P Clamping Plate 350 for DIN Flanges with Fixing Bolt - nitrided upon request
for flange US standard, ANSI / ASME B 16,5 300 lbs, from 1/2" to 8", delivery contents: 2x 280255, 2x 280256, 2x 280257, 2x 280258, required for system 16: 000562 / 000520 / 000546, required for system 22: 028022 / 002822 / 000544 for flanges DIN 2633, nominal width DN 15 - DN 200, delivery contents: 2x 280222, 2x 280223, 2x 280224, required for system 16: 000562 / 000520 / 000546, required for system 22: 028022 / 002822 / 000544
Length: (a) Width: (b) Ø: MS: (d) Weight: Length: (a) Width: (b) Ø: MS: (d) Weight:
350 mm 250 mm - 25 mm 14,00 kg 350 mm 250 mm - 25 mm 14,00 kg
2-280252.P Clamping Plate 400-600 Ibs with Fixing Bolt - nitrided upon request 2-280222 Fixing Bolt Ø 13,8 for bore 8.1 - burnished upon request
for flange US standard, ANSI / ASME B 16,5 400-600 lbs, from 1/2" to 6", delivery contents: 2x 280255, 2x 280256, 2x 280257, 2x 280258, 2x 280259, required for system 16: 000562 / 000520 / 000546, required for system 22: 028022 / 002822 / 000544 for Clamping Plate 280220.P / 280221.P
Length: (a) Width: (b) Ø: MS: (d) Weight: Length: (a) Width: (b) Ø: MS: (d) Weight:
350 mm 250 mm - 25 mm 14,00 kg 39 mm - 14 mm - 0,03 kg
2-280255 Fixing Bolt Ø 15,5 - burnished upon request 2-280223 Fixing Bolt Ø 17,8 for bore 10.1 - burnished upon request
for Clamping Plate 280250.P / 280251.P / 280252.P for Clamping Plate 280220.P / 280221.P
Length: (a) Width: (b) Ø: MS: (d) Weight: Length: (a) Width: (b) Ø: MS: (d) Weight:
39 mm - 16 mm - 0,03 kg 41 mm - 18 mm - 0,05 kg
MS=Material thickness; MS=Material thickness;
2-280256 Fixing Bolt Ø 18,9 - burnished upon request 2-280224 Fixing Bolt Ø 21,8 for bore 16.1 - burnished upon request
for Clamping Plate 280250.P / 280251.P / 280252.P for Clamping Plate 280220.P / 280221.P
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
41 mm 19 mm 0,05 kg 47 mm 22 mm 0,10 kg
2-280257 Fixing Bolt Ø 22,2 - burnished upon request 2-280225 Fixing Bolt Ø 25,8 for bore 16.1 - burnished upon request
for Clamping Plate 280250.P / 280251.P / 280252.P for Clamping Plate 280220.P / 280221.P
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
45 mm 22 mm 0,10 kg 50 mm 26 mm 0,14 kg
2-280258 Fixing Bolt Ø 25,2 - burnished upon request 2-280226 Fixing Bolt Ø 29,8 for bore 16.1 - burnished upon request
for Clamping Plate 280251.P / 280252.P for Clamping Plate 280220.P / 280221.P
Length: (a) Ø: Weight: Length: (a) Ø: Weight:
50 mm 25 mm 0,14 kg 55 mm 30 mm 0,20 kg
2-280259 Fixing Bolt Ø 28,2 - burnished upon request 2-280227 Fixing Bolt Ø 32,8 for bore 16.1 - burnished upon request
226 = Item produced for stock = Item produced on order Explanations see page 3 227
28 22 16 Positioner Positioner 16 22 28
Specifications
• Hydraulic rotation of the clamping plate
• Tilting range up to 95° (optional up to 140°)
• Hydraulic height adjustment and tilt function
Siegmund Roto-Positioner • Large working area, low design height
• Optional rotatable ground connection
• Optional rotation of the clamping plate with electric drive
The Siegmund Roto-Positioner is ideal for welding,
(still hydraulic height adjustment and tilt function)
assembly and maintenance tasks. It has an infinitely
adjustable vertical height adjustment with hydraulic
rotary and tilt functions. Productivity
• Rapid alignment of workpieces
Available in different sizes with load capacities of • Optimum ergonomic positioning offers maximum productivity
1250 kg, 2000 kg, 3000 kg and 4500 kg. Custom sizes • One set-up for lifting, tilting and rotating
available on request. • Reduced down time
Ergonomics
The unit is ready for immediate use on power up.
• Convenient access to component delivers best product performance
• Reduced risk of repetitive strain injury
Quality
• Improved quality with flexible positioning (flat position)
• Improved quality through maximum access
F More information:
www.siegmund.com/F-pos-r
95°
5°
Bmax
Amax
Bmin
Amin
Weight Positioner (without table top) approx. 757 kg approx. 930 kg approx. 1.477 kg approx. 2.500 kg
Max. load-bearing capacity 1 1.250 kg 2.000 kg 3.000 kg 4.500 kg
Table revolutions per minute (hydraulic) 2 2 2 -
Table revolutions per minute (electric) 0-2 0-2 0-2 0 - 1,5 Control panel with teach function Optional tilt angle 140°
Max. turning moment table 490 Nm 1.570 Nm 2.350 Nm 5.300 Nm Programming, saving and repeating of positions, 140° tilting of Clamping Plate, rotation of octagonal tables from
Tilt angle 95° 95° (Alternatively 140°) 95° (Alternatively 140°) 95° (Alternatively 140°) Manual control (wired) available for an extra charge 1200 mm in the extended position is not possible
Tilting moment 4.900 Nm 7.850 Nm 11.750 Nm 21.200 Nm
A - Vertical movement range min. 540 mm, max. 1.120 mm min. 550 mm, max. 1.300 mm min. 740 mm, max. 1.590 mm min. 830 mm, max. 2.080 mm 6R000550 for RP 1250, RP 2000, RP 3000 upon request 6R000350 for RP 2000 upon request
B - Horizontal movement range min. 700 mm, max. 1.280 mm min. 650 mm, max. 1.400 mm min. 720 mm, max. 1.570 mm min. 880 mm, max. 2.130 mm 6R000560 for RP 4500 upon request 6R000360 for RP 3000 upon request
C - Length 1.760 mm 1.850 mm 2.400 mm 2.590 mm
D - Width 1.630 mm 1.660 mm 1.825 mm 2.270 mm
E - Frame width 750 mm 750 mm 930 mm 1.250 mm Electric drive Rotatable ground connection
F - Clamping plate diameter Ø 800 mm Ø 800 mm 1.100 x 1.100 mm 1.500 x 1.500 mm RP 4500 Standard with electric drive, Infinitely variable speed, Rotatable ground connection connected directly to the device via a trunnion,
Item No. 6R120016 6R200016 6R300016 6R450016 Lifting and tilting by hydraulic drive no cable twisting
Price 2 upon request upon request upon request upon request
6R000450 for RP 1250 upon request 6R000400 for RP 1250, RP 2000, RP 3000 upon request
1 Please note: Maximum load minus weight of table.
2 without table top / octagonal plate 6R000460 for RP 2000 upon request 6R000410 for RP 4500 upon request
3 For RP 3000 and RP 4500 we recommend octagonal tables with a width across flats of at least 1200 mm. 6R000470 for RP 3000 upon request
Ergonomics
• Convenient access to component delivers best product performance
• Reduced risk of repetitive strain injury
Quality
• Improved quality with flexible positioning (flat position)
• Improved quality through maximum access
More information:
ØD www.siegmund.com/F-pos-s
B
C
6S000150 for SL 2000, SL 4000, SL 6000 upon request 6S000250 for SL 2000, SL 4000, SL 6000 upon request
Weight Positioner (without table top) approx. 1.200 kg approx. 1.150 kg approx. 1.300 kg
Max. load-bearing capacity 1 2.000 kg 4.000 kg 6.000 kg
Table revolutions per minute (electric) 1 1 0,75
Max. turning moment table 3.000 Nm 3.500 Nm 5.500 Nm Control panel with teach function Floor rails
Speed lifting and lowering 56 cm/min. 56 cm/min. 56 cm/min. Programming, saving and repeating of positions moving towers parallel to each other
Motor power turning 0,75 kW 0,55 kW 0,55 kW
Motor power lifting and lowering 2 kW 2 kW 2 kW
Tower height 2.500 mm 2.500 mm 2.500 mm 6S000550 for SL 2000, SL 4000, SL 6000 upon request 6S000640 Single Rail 2 m upon request
A - Min. movement range 350 mm 350 mm 450 mm 6S000641 Extension Single Rail 2 m upon request
B - Total stroke 1.450 mm 1.550 mm 1.500 mm 6S000650 Double Rails 2 m upon request
C - Max. movement range 1.800 mm 1.900 mm 1.950 mm Rotatable ground connection 6S000651 Extension Double Rails 2 m upon request
D - Clamping plate diameter Ø 600 mm Ø 600 mm Ø 800 mm Rotatable ground connection connected directly to the device via a trunnion,
Item No. 6S200016 6S400016 6S600016 no cable twisting
Price 2 upon request upon request upon request
6S000400 for SL 2000, SL 4000, SL 6000 upon request
1 Please note: Maximum load minus weight of table.
2 without table top / octagonal plate
Ergonomics
• Convenient access to component delivers best product performance
• Reduced risk of repetitive strain injury
Quality
• Improved quality with flexible positioning (flat position)
• Improved quality through maximum access
More information:
www.siegmund.com/F-pos-m
C
A
BD
MP 500 MP 1500
232 233
16 Octagonal tables Octagonal tables 22
Welding tables for manipulators
Table side panel 100 mm Table side panel 50 mm without side panel (12 mm) Table side panel 150 mm without side panel (18 mm)
50x50 mm Grid 50x50 mm Grid 50x50 mm Grid 100x100 mm Grid 100x100 mm Grid
Size with Plasma nitration 1 with Plasma nitration 1 with Plasma nitration 1 Size with Plasma nitration 1 with Plasma nitration 1
upon request upon request
500 mm 600 mm
Weight approx. 54 kg | Item No. 2-950500.P Weight approx. 79 kg | Item No. 2-930600.P
upon request upon request upon request upon request upon request
600 mm 800 mm
Weight approx. 98 kg | Item No. 2-920616.P Weight approx. 80 kg | Item No. 2-920616.1.P Weight approx. 63 kg | Item No. 2-950600.P Weight approx. 210 kg | Item No. 2-920822.P Weight approx. 112 kg | Item No. 2-930800.P
upon request upon request upon request upon request upon request
800 mm 1000 mm
Weight approx. 131 kg | Item No. 2-920816.P Weight approx. 104 kg | Item No. 2-920816.1.P Weight approx. 84 kg | Item No. 2-950800.P Weight approx. 276 kg | Item No. 2-921022.P Weight approx. 155 kg | Item No. 2-931000.P
upon request upon request upon request upon request upon request
1000 mm 1200 mm
Weight approx. 171 kg | Item No. 2-921016.P Weight approx. 139 kg | Item No. 2-921016.1.P Weight approx. 111 kg | Item No. 2-951000.P Weight approx. 368 kg | Item No. 2-921222.P Weight approx. 220 kg | Item No. 2-931200.P
upon request upon request upon request upon request upon request
1200 mm 1400 mm
Weight approx. 229 kg | Item No. 2-921216.P Weight approx. 188 kg | Item No. 2-921216.1.P Weight approx. 157 kg | Item No. 2-951200.P Weight approx. 477 kg | Item No. 2-921422.P Weight approx. 305 kg | Item No. 2-931400.P
Surcharge for customizing upon request upon request
Surcharge for customizing Adapter Plate 1500 mm
Surcharge Adapter Plate/Drilling circle Weight approx. 525 kg | Item No. 2-921522.P Weight approx. 339 kg | Item No. 2-931500.P
Further table sizes are available on request. Well protected against rust,
scratches and weld spatter.
Weight = Octagonal Plate + Pallet
Specifications Specifications
premium steel S355J2+N, premium steel S355J2+N,
plasma nitrided and BAR-coated plasma nitrided and BAR-coated
Borehole Ø 16 mm Borehole Ø 22 mm
50x50 mm Grid 100x100 mm Grid
Material thickness 12 mm Material thickness 18 mm
The octagonal table is particularly suitable for use on manipulators of The octagonal table is particularly suitable for use on manipulators of
robot cells. It offers similar clamping options as a Siegmund welding robot cells. It offers similar clamping options as a Siegmund welding
table system 16 due to the parallel hole pattern on the top. To meet table system 22 due to the parallel hole pattern on the top. To meet
your individual requirements, the table can be adapted to your your individual requirements, the table can be adapted to your
production environment on request. production environment on request.
7 Adapter Plate
6 5 4 3 2 1 Adapter Plate
VERSIONEN
Special adaptor plates are available on request. Due to customisation Special adaptor plates are available on request. Due to customisation
ZONE VERSION
weights will vary and surcharges will apply. Foot plates or adapter plates F weights will vary and surcharges will apply. Foot plates or adapter plates
are not included as standard in the octagonal tables. are not included as standard in the octagonal tables.
8 7 6 5 4 3 2 1
F F
E E
D
D D
Illustration shows:
Siegmund Synchrolift Positioner
More information:
www.siegmund.com/F-pos-s
B B
Benennung / name
System Version
Achtkanttisch SW1200x150
22 octagonal table SW1200x150
Bemerkung / comment Zeichnungsdatum / drawing date
234 B
235
Änderungsdatum / date of change
2768-m
A A
1200 x 1200 x 150 mm
Abmaße / dimension
Benennung / name
System Gewicht / weight
327.77 Kg
Version
Achtkanttisch SW 800 Material
1.0570 (S355J2G3)
28 Octagonal tables Octagonal tables 28
Premium Light 2
-40% Up to 40% weight reduction compared to conventionally used material!
Table side panel 200 mm Table side panel 100 mm without side panel (25 mm) Table side panel 200 mm Table side panel 100 mm without side panel (15 mm)
100x100 mm Grid 100x100 mm Grid 100x100 mm Grid 100x100 mm Grid 100x100 mm Grid 100x100 mm Grid
Size with Plasma nitration 1 with Plasma nitration 1 with Plasma nitration 1 Size with Plasma nitration 1 with Plasma nitration 1 with Plasma nitration 1
upon request upon request
600 mm Weight approx. 94 kg | Item No. 2-940600.P
600 mm Weight approx. 69 kg | Item No. 2-840600.P
upon request upon request upon request upon request upon request upon request
800 mm Weight approx. 261 kg | Item No. 2-920800.P Weight approx. 203 kg | Item No. 2-920800.1.P Weight approx. 139 kg | Item No. 2-940800.P
800 mm Weight approx. 221 kg | Item No. 2-820800.P Weight approx. 152 kg | Item No. 2-820800.1.P Weight approx. 95 kg | Item No. 2-840800.P
upon request upon request upon request upon request upon request upon request
1000 mm Weight approx. 386 kg | Item No. 2-921000.P Weight approx. 279 kg | Item No. 2-921000.1.P Weight approx. 198 kg | Item No. 2-941000.P
1000 mm Weight approx. 285 kg | Item No. 2-821000.P Weight approx. 199 kg | Item No. 2-821000.1.P Weight approx. 142 kg | Item No. 2-841000.P
upon request upon request upon request upon request upon request upon request
1200 mm Weight approx. 514 kg | Item No. 2-921200.P Weight approx. 380 kg | Item No. 2-921200.1.P Weight approx. 280 kg | Item No. 2-941200.P
1200 mm Weight approx. 373 kg | Item No. 2-821200.P Weight approx. 269 kg | Item No. 2-821200.1.P Weight approx. 205 kg | Item No. 2-841200.P
upon request upon request upon request upon request upon request upon request
1400 mm Weight approx. 660 kg | Item No. 2-921400.P Weight approx. 501 kg | Item No. 2-921400.1.P Weight approx. 388 kg | Item No. 2-941400.P
1400 mm Weight approx. 467 kg | Item No. 2-821400.P Weight approx. 350 kg | Item No. 2-821400.1.P Weight approx. 254 kg | Item No. 2-841400.P
upon request upon request upon request upon request upon request upon request
1500 mm Weight approx. 726 kg | Item No. 2-921500.P Weight approx. 557 kg | Item No. 2-921500.1.P Weight approx. 435 kg | Item No. 2-941500.P
1500 mm Weight approx. 511 kg | Item No. 2-821500.P Weight approx. 381 kg | Item No. 2-821500.1.P Weight approx. 310 kg | Item No. 2-841500.P
Further table sizes are available on request. Well protected against rust, Further table sizes are available on request. Well protected against rust,
scratches and weld spatter. scratches and weld spatter.
Weight = Octagonal Plate + Pallet Weight = Octagonal Plate + Pallet
Specifications Specifications 2
For clamping with 280511 bolts a Spacer
Ring 800653.1.N is required.
Borehole Ø 28 mm Borehole Ø 28 mm
100x100 mm Grid 100x100 mm Grid
Material thickness 25 mm Material thickness 15 mm
The octagonal table is particularly suitable for use on manipulators of The octagonal table is particularly suitable for use on manipulators of
robot cells. It offers similar clamping options as a Siegmund welding robot cells. It offers similar clamping options as a Siegmund welding
table system 28 due to the parallel hole pattern on the top. To meet table system 28 due to the parallel hole pattern on the top. To meet
your individual requirements, the table can be adapted to your your individual requirements, the table can be adapted to your
production environment on request. production environment on request.
8 7 6 5 4 3 2 1
E E
D D D
Benennung / name
System
B Achtkanttisch SW1200x200 Premium Light
Version
236 System
Benennung / name
Achtkanttisch SW 1000
Version
Bemerkung / comment Zeichnungsdatum / drawing date
Octagonal table
general tolerance
2768-m
Bemerkung / comment Zeichnungsdatum / drawing date
Be A Abmaße / dimension A
Siegmund in action
Machine Tools and Plant Construction Stainless Steel Processing – Inox Ajanović, Tešanj (BIH)
For 35 years, KORAX has been producing equipment and machinery for food processing, especially for the meat processing industry. INOX Ajanović, founded in 2000, the industry leader of stainless steel processing in Bosnia and Herzegovina, produces industrial
The product range includes conveyor belts and systems, cooking and smoking chambers, wastewater treating equipment and various equipment, products for indoor and outdoor as well as yacht parts for a wide variety of industries.
cleaning systems. The subsidiary KORAX Solar was the first company in Hungary that started manufacturing solar panels 15 years ago
and is now one of the biggest solar system manufacturers in Central Europe. The company works on around 50 Siegmund welding tables in various sizes and systems every day. In the series of pictures we
show the production of a table frame. Managing director Mujkanović of INOX Ajanović about Siegmund: „Since we produce a wide
Structural steel materials and stainless steel are processed in their factory. In order to shorten assembly times and further improve variety of products every day, our table setup changes constantly. Siegmund products are versatile enough to meet those changes
the quality of the products, the workplaces have been equipped with several Siegmund tables. This example shows the assembly and fast and effortlessly. With Siegmund tools and tables, we can reproduce the same result every time, which makes serial production
welding of a food conveyor cart. faster and more precise.“
Worldwide in use
Every day engineers and manufacturing
industries worldwide benefit from the
flexible application of the Siegmund system.
238 239
Siegmund in action
Vehicle construction – Red Beard‘s Garage, Sweetwater, TN (USA)
The story of Red Beard’s Garage began in 2015 when founder Greg repaired his daughter’s go-kart in his garage. To help other
people with related problems, he films himself at work and provides the videos online. Today the team of Red Beard’s Garage,
consisting of several members, produces all kinds of karts and off-road vehicles and runs a successful YouTube channel.
To handle the huge challenges in vehicle construction, the team realizes almost all work steps on a Siegmund welding table
and the Siegmund Workstation.
240 241
Rail System
news
With the Siegmund rail system, projects of any dimension can be positioned and clamped
accurately. The extremely precise assembly creates a structured workspace with maximum
precision and minimum tolerance.
The combination of tables, connecting frames and accessories results in endless clamping
options in any dimension. With the help of legs with castors, tables and accessories can be
easily moved on the rails and fixed in a 100 mm grid.
Example: At a length of 25000 mm, there is merely a deviation of approx. 2 mm. Our recommendation:
(When mounted with appropriate measuring equipment and constant temperature) Support- and Foundation Rail with integrated
round rail for easy movement of components
More information
and product versions:
www.siegmund.com/F-rail
Platform System
The Siegmund platform system simplifies working with very Follow us Siegmund Website
large or heavy components. When assembled, a structured
and precise work surface of any size is created. The platforms All the latest product news and promotions are available on At www.siegmund.com you will find:
have a grid of boreholes and grid lines for maximum flexibility all our social media channels. Follow us now and be always
and accuracy. The platform system can be installed precisely up to date! • complete overview of our whole product range
underfloor as well as above-floor and expanded at any time. • detailed technical information
• Further products and promotions
siegmundgroup • Numerous product and application videos
• lots of interesting practical examples
Bernd.Siegmund.GmbH • and much more
siegmund.welding
More information
and product versions:
www.siegmund.com/F-platform
berndsiegmundgmbh www.siegmund.com
berndsiegmundgmbh
All prices on request. Technical data are subject to change. Resale reserved. Our Terms and Conditions of Sale strictly apply. Subject to price changes and printing errors.
All texts, pictures and design elements are copyrighted by the Bernd Siegmund GmbH. No part of this catalog may be edited analogously or digital or in another mode,
may be duplicated or published out of the catalog without written approval of the legal owner. Offences are prosecuted.
© 2023 Bernd Siegmund GmbH
242
You are cordially invited to our booth for a small snack.