dl MOTORTRONICS
AC Drives
% - 30HP
200 - 460 Volts
The Ideal AC Drive...
...Full Featured, YetThe Ideal AC Drive
by CAMOTORTRONICS
Qualified to Meet Your Needs
The CSD Series is a compact, cost-effective drive with features
typically found only in more complex and expensive AC drives. This
full featured drive is recognized for being simple to set up, program
and operate. Designed for use in general industrial applications up to
30HP, the CSD Series is the ideal drive for your application.
The convenient operator panel provides simple, yet informative
interface during setup and operation. The tactile feedback keypad is
used for programming the drive and motor speed can be controlled
using either the keypad or the handy, built-in potentiometer. The
alpha-numeric LCD display indicates operation, status and fault read-
out and is easily visible in low ambient light conditions. In addition,
LED indicators provide direction of rotation, operating status and.
drive output information.
The CSD Series is compact in size, yet designed for maximum power
delivery. Thermal capabilities have not been compromised (unlike
some "micro drives" on the market today). This rugged design allows
for single phase input on 230V units without
derating (up to 3HP), allowing the CSD to be
used in lieu of a phase converter. And all
models are capable of delivering 150%
overload for upto 1 minute, making it a
‘true, heavy duty AC drive.Friendly
Not a word you often associate with industrial
technology products, but it fits the CSD Series
from Motortronics. Knownaas the AC drive that
is "easy to use..tight out of the box,’ the CSD
Series requires only a few simple set up steps
and you are ready to run. A quick touch of the
keypad or twist of the potentiometer for simple
speed control..whet could be easier?
Full Featured, Yet Easy to Use
Hardworking
‘Heavy Duty Design
Built to be a “workhorse,” the CSD Series design
provides maximum thermal capacity yet in a
compact package.
Braking Intelligence
Standard units provide 20% braking torque with
1100% braking capability by simply adding braking
transistors and resistors. The CSD Series can stop
your load quickly and safely for maximum
productivity.
Simple to use, but with the features you need..
this is what the CSD Series is all ebout.
Creative
Built-in Process Timers
Seven timers can be used with pre-set speeds in sequential
Process applications for upto 60 minutes, Examples:
+ Mix ingredient for3 minutes at low, then blend at
high speed for 1 hour Speed
+ Run product slowly through a conveyor oven for
12 minutes, hen.
+ Onotart command, run at act speed for3 hours he
thon tum off add 3 presets together) a
‘Timers can be setup for "on-delay" or “off delay"
Dependable Outstanding Credentials
Active Stall Prevention
‘Automatically adjusts the output to prevent
nuisance trips due to rapid load changes
Vibration Reduction
‘Adjusts the output V/f pattern to reduce or
eliminate mechanical vibration in the load
The CSD Series has been designed and tested to
meet the most stringent industry standards.
ce OH
Adapts Well to New Environments
NEMA 1 ([P20) basic ventilated enclosure
*+ Canalso be used as a chassis mount for control panels
NEMA 4/4X (IP66) Seals against contaminants
+ Corrosion resistant non-metallic enclosure is perfect for
‘caustic or acidic applications
NEMA 4/4x NEAL
GDsI0N4 DaasSimple Setup and Operati
Command Keys
Seven command keys
provide access to all the
‘provides positive force
detent for high noise
environments.
RUNSTOP - used to start
and stop the motor
in keypad control mode
FWO/REV- controls the
direction of the motor shaft
rotation when in keypad
control mode
Drive Display
An alpha-numeric display shows the operating parameters,
values and faults in plain text without complex codes. The LCD.
characters are easy to read in high or low ambient light
conditions.
Indicator LEDs
Operating mode
FUN - lights when programming function parameters
H2/RPM - lights when display is indicating frequency or speed
Remote mode
‘SEQ - lights when remote start/stop is initiated
FRO - lights when remote speed control is being used
Direction of operation
Flashes in off mode
FWO - lights in forward run
REV. lightsin reverse run
‘Output indication
VOLT - lights when display
is indicating output voltage
or de bus voltage
AMP - lights when display
is indicating outputcurrent
DSP/FUN allows you to access
‘and change functions parameters
or return to display mode