Professional Documents
Culture Documents
Bosch Me7.4.5
Bosch Me7.4.5
5 PSA
plugin 025
The lay-by pins are placed in the lower part of the ECU.
DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C.
Make sure that the POWER led (red) on Trasdata is ON.
DO NOT USE THIS CONNECTION WITH THE METAL POSITIONING FRAME
https://ecu.design
BOSCH ME7.4.5 PSA
ECU CONNECTOR
BOOT&CNF1 CONNECTION
Connect the BLUE and GREY wires of the cable F32GN037C as described here below :
https://ecu.design
BOSCH ME7.4.5 PSA
https://ecu.design