Professional Documents
Culture Documents
1
Thermostatic Oil Bath used
All procedures that require temperatures above 100°
need another liquid inside the thermostatic bath tank. In
most cases, silicone oil is used reaching about 200°, but
it is not uncommon to use mineral oil, cottonseed oil and
even phosphoric acid. The sector that more than any
other makes use of thermostatic oil baths is the
mechanical one. In the past, thermostatic oil baths were
in fact used to filter particulates out of air inside the
engines of cars and tractors, a practice that fell into
disuse due to modern paper filters but still implemented
in small engines. Today, one of the most frequent uses of
the thermostatic oil bath is to heat bearings so they
expand before installing them on shafts of aircraft
engines and tractors.
The FDM Water and Oil Thermostatic Bath
FDM - Environment Makers proposes its
thermostatic water bath consisting of a fully electro-
welded tank, which guarantees high resistance to
corrosive agents and in AISI 304 or 316 stainless steel.
The temperature is managed by a simple and intuitive
external interface, analogic or digital, depending on your
preferences. For special needs, or the need to reach
temperatures above 99.9 °, FDM - Environment Makers
can design a custom-made thermostatic oil bath.