Professional Documents
Culture Documents
HEADLOCKS
FEED FRONTS
POSTS + HARDWARE
FREESTALLS
CALF EQUIPMENT
3 BAR GATES
SAFETY HEADLOCKS
Control pipe 36 mm
PATENTED PATENTED
Safety IV
locking stop
One support
per place 36 mm
UNIQUE!
Ø 60 mm steel in TSE 275
Resistant to bending
Calibrated
axis
2
OCTOBER
HEADLOCKS
The SAFETY Headlock is adapted to dehorned dairy cattle or to moderately horned breeds. Not suitable for fattening
bulls.
Given lengths are center-center 102mm posts dimensions.
The low level help’s the breeder to release a fallen animal.
• 4 m ROW
SQ0540 Panel SAFETY 5/4 ( 5 adult cattle on 4 m) 116 kg
SQ0640 Panel SAFETY 6/4 ( 6 adult cattle on 4 m) 125 kg
NEW
SQ0740 Panel Safety HEIFER 7/4 ( 7 cattle of 6 to 14 months on 4 m ) !
145 kg
• 5 m ROW
SQ0650 Panel SAFETY 6/5 ( 6 adult cattle on 5 m) 147 kg
SQ0750 Panel SAFETY 7/5 ( 7 adult cattle on 5 m) 156 kg
SQ0850 Panel SAFETY 8/5 ( 8 cattle of 18 to 24 months on 5 m) ! 168 kg
SQ0950 Panel Safety HEIFER 9/5 ( 9 cattle of 6 to 14 months on 5 m) ! 186 kg NEW
• 6 m ROW
SQ0860 Panel SAFETY 8/6 ( 8 adult cattle on 6 m) 186 kg
!
SQ0960 Panel SAFETY 9/6 ( 9 cattle of 18 to 24 months on 6 m) 190 kg
!
SQ1060 Panel SAFETY 10/6 (10 cattle of 12 to 18 months on 6 m) 206 kg
SQ1160 Panel Safety HEIFER 11/6 (11 cattle of 6 to 14 months on 6 m) !
228 kg NEW
• 5 m ROW
SQ1750 Panel SAFETY fixed 7/5 ( 7 adult cattle on 5 m) 147 kg
SQ1850 Panel SAFETY fixed 8/5 ( 8 cattle of 12 to 24 months on 5 m) 160 kg
• 6 m ROW
SQ1860 Panel SAFETY fixed 8/6 ( 8 adult cattle on 6 m) 182 kg
IMPERATIVE
It is imperative to seal the reinforcement tube for
! Age of cattle is given as an indication only ; it has Headlocks 4, 5 and 6 m.
to be adapted according to the herd.
3
2015
Heavy duty
SAFETY IV
HEADLOCKS
headlocks fork
Locking mechanism
secured by 4
longitudinal welds
NECK
COMFORT Calibrated
axis
Safety IV axis made in steel coat
with Polyamide shock (soundproof)
can be unlocked in security form
Strengthened by remote control. Innaccessible to
swing arms the animals
Parallel Spacer
Calibrated wear-out
resistant steel ring Patented
Ends formed
in dome Safety for
neck band
Calf guard
Central individual
Neck comfort Patented One-piece control pipe Locking
with Safety IV locking stop
in composite material
Patented
Control pipe supported at
each locking place
Stop
Safety IV locking stop
4
OCTOBER
HEADLOCKS
STRENGTHS
Clawed clamp :
all corners are rounded-off
Equilibrated and
quiet use
Patented
Pre-adjusted welding
knots for welding
RAZ system :
Automatic release system of
swing arms in opened position
(without noise)
1
Open
2
Locked
3
Safety
Reinforcement tube to seal
in concrete for Headlocks Bottom opening is the same as opening on top part
exceeding 4 meters. Symmetry = Safety
Works inclined
5
2015
AXIAL
HEADLOCKS
6
OCTOBER
HEADLOCKS
AXIAL ADJUSTABLE HEADLOCKS
The AXIAL Headlock, with its bent swing arms offers a big head passage and is particularly
suitable for lightly horned beef breeds.
Given lengths are center-center 102 mm posts dimension.
IMPERATIVE
Ø 49 mm
It is imperative to seal the reinforcement tube for
Headlocks of 4, 5 and 6 m.
from 20 cm
to 31 cm
Ø 49 mm
7
2015
MODULES
Moulded stop
Handle Ø 27 mm Control pipe
170 mm
190 mm
Adjustable bar
End piece
8
OCTOBER
HEADLOCKS
SAFETY AND
AXIAL
Module SAFETY®
MO0250 Standard place of module SAFETY®
until 750 mm/place 14 kg
Module AXIAL
MO0230 Standard place of module AXIAL
until 750 mm/place 13 kg
LOCKING RING
To lock the modules and adapt ends on a feed rack element of 3 & 4 places
MO5049 Module locking ring 0,27 kg
LOCKING RING
9
2015
HEADLOCKS
RC
Support and
translation roll
Adjustment
cm by cm
Control pipe Ø 27 mm Adjustable
double-frame
Individual locking
Comfortable
position
UNIQUE!
Ø 60 mm steel in TSE 275 Strengthened swing arms
Resistant to bending Calibrated
axis
10
OCTOBER
HEADLOCKS
HEADLOCKS RC (Collective Adjustment)
This type of HEADLOCK inspired from the Axial HEADLOCK , allows with its double-frame, a meticulous adjust-
ment (cm by cm) of the collar width depending on the evolution of the livestock.
The nominal lengths correspond to dimensions Center-center posts 102mm.
• 4 m ROW
RC0640 HEADLOCKS RC 6/4 m ( 6 spaces on 4 m) 146 kg
• 5 M ROW ! Adjustment (cm by cm) of the
RC0750 HEADLOCKS RC 7/5 m ( 7 spaces on 5 m) 184 kg collar width depending on the evo-
RC0850 HEADLOCKS RC 8/5 m ( 8 spaces on 5 m) 197 kg lution of the livestock.
• 6 m ROW
RC0860 HEADLOCKS RC 8/6 m ( 8 spaces on 6 m) 217 kg
RC0960 HEADLOCKS RC 9/6 m ( 9 spaces on 6 m) 221 kg
RC1060 HEADLOCKS RC 10/6 m (10 spaces on 6 m) 240 kg
! ! !
12
21 cm cm
WARNING !
This HEADLOCK has been designed in order to
adjust the collars width quickly. The farmer will
adapt it depending on the breed and age of the 36 cm
animals. Jourdain shall not be held responsible
for any accident caused by improper adjustment.
! !
11
2015
CAUTION
Foresee 10 cm of inclination
MOUNTING
A slight inclination optimises the use
of the HEADLOCK
A
Indicative
measurement for Adult cattle 55/65
adult cattle Heifer 45/55
Leave 3 cm
Do not forget
the central reinforcement
40/50 cm
in the wall
A
+15/18 cm IMPERATIVE
Reinforcement tube
to seal
20 cm
IMPERATIVE
It is imperative to seal the reinforcement
tube for Panels of 4, 5 & 6 m.
HEADLOCKS MOUNTED
ON SAFETY IV POST
Apply a bituminous paint at the bottom of the
posts.
HEADLOCKS MOUNTED
WITH BRACKETS
12
OCTOBER
HEADLOCKS
ADVICE FOR HEADLOCKS
SAFETY, AXIAL and RC
HEADLOCKS
MOUNTED ON
OCTAGONAL POST
102 mm
Mounting with incline brackets on the top
part. Apply a bituminous paint at the bot-
tom of the posts.
HEADLOCKS MOUNTED
ON H POST
HEADLOCKS MOUNTED
ON A WOODEN POST
13
2015
14
OCTOBER
2015
15
HEADLOCKS
CORNADIS
SWEDISH
HEADLOCK
WARNING !
Use 2,43 m plain posts with straps
Ø 42 mm
400 mm
A
WARNING !
1,20 m
740 mm
Ø 60 mm
Reinforced swing
arms
16
OCTOBER
HEADLOCKS
SWEDISH HEADLOCK FIXED
Swedish headlock with locking at the bottom. Reserved for long-horned animals.
Given lengths are center-center 102 mm posts dimensions.
• 4 m ROW
PS0261 Panel S.U. 5/4 (5 spaces/4 m) 100 kg
• 5 m row
PS0262 Panel S.U. 7/5 (7 spaces/5 m) 137 kg
• 6 m row
PS0263 Panel S.U. 8/6 (8 spaces/6 m) 160 kg
Swedish headlock A B
5 spaces on 4 m 680 mm 220 mm
7 spaces on 5 m 620 mm 220 mm
102 mm Plain 8 spaces on 6 m 660 mm 220 mm
Post 2,43 m
with straps
IMPERATIVE
It is imperative to seal the reinforcement
tube for Headlocks of 4, 5 & 6 m.
55/65 cm
45/55 cm
+15/18 cm IMPERATIVE
LAYOUT
swedish Headlock
17
2015
SWEDISH
HEADLOCK
MONOPIPE
Ø 60 mm
Ends formed in dome
A
910 mm
600 mm
102 mm Plain
Post 2,43 m
with straps
Swedish Monopipe A B
4 spaces on 3 m 670 mm 220 mm
5 spaces on 4 m 750 mm 220 mm
6 spaces on 5 m 800 mm 220 mm
7 spaces on 5 m 670 mm 220 mm
WARNING !
Use 2,13 m plain posts with straps.
55/65 cm
45/55 cm
+15/18 cm IMPERATIVE
LAYOUT Swedish
HEADLOCK MONOPIPE
18
OCTOBER
HEADLOCKS
SWEDISH MONOPIPE HEADLOCK
FIXED COLLAR
Swedish Monopipe Headlock with locking at the bottom. Completely built in 60 mm
pipe. Reserved to long horned animals
Foresee 1 post Ø 76 mm and 1 strap Ø 76 mm VE2570 or 2 reinforcement tubes to seal
for the Panels 4 and 5 m.
Given lengths are center-center 102 mm posts dimensions.
IMPERATIVE
ONE POST Ø 76 mm or 2 reinforcement
tubes to seal for the Panels 4 and 5m.
Strap Ø 76 mm
reinforcement post
19
2015
HEADLOCK
m
940 m
table
Adjus
Reinforcement
to fix
PR5052 PR5053 MO0234 VE2570 PR6000
Extension Supplementary Reinforcement Strap Ø 76 mm End piece HEADLOCK man passage
end piece bar tube to seal for reinforcement post
m
m
420
m
m
600
Bolt 10/50
20
OCTOBER
HEADLOCKS
ACCESSORIES
HEADLOCK ACCESSORIES
PR5052 Headlock extension end piece (+ 500 mm) 10 kg
PR5053 Supplementary bar for extension end piece
beyond 250 mm 3 kg
PT9910 Clawed clamp 60/60 (BULL HEADLOCK) 0,9 kg
PR9910 Clawed clamp 60/42 (SAFETY® or AXIAL) 0,6 kg
AT0201 Clawed clamp 42/42 (feeder park) 0,5 kg
VE2505 Clawed clamp 42/27 (calf headlocks) 0,3 kg
PR0298 Inclination fitting (2 per panel) each 0,6 kg
SQ9950 Post SAFETY IV to seal (100 x 60 cm length 2 m)
Only for inclined mounting
(Safety / Axial) 18 kg
MO0260 Reinforcement support for prefabricated wall 15 to 20 cm 4,5 kg
SQ9941 Control handle SAFETY IV 0,5 kg
AT9903 Control Handle AXIAL 27 mm 0,35 kg
SQ9943 Safety IV control pipe connection 0,8 kg
SQ9942 Safety IV control plate 0,25 kg
MO5050 Standard adjustable end piece 1,3 kg
MO5052 End piece flat in L 1,3 kg
MO5054 End piece right welded 1,3 kg
FE2106 End piece ECO double 2,3 kg
MO0234 Reinforcement to seal 1,5 kg
PR6000 End piece headlock man passage (+ 500 mm) 20 kg
Cannot be mounted on Safety IV post
VE2570 Strap Ø 76 Headlock strengthening post 1,5 kg
SQ9940 Swing arm SAFETY® IV BARED (Control pipe Ø 32 mm) 5 kg SQ9950
PA9900 Swing arm AXIAL BARED (Control pipe Ø 27 mm) 4 kg
Post Safety IV
MO5049 Locking ring 0,27 kg
AT9907 Anti noise buffer AXIAL (the unit)
Bolt 12/90
Bolt 10/65
PT9910 Bolt 10/65
PR9910 Bolt 10/50
Clawed clamp 60/60 AT0201
Clawed clamp 60/42 VE2505
(BULL HEADLOCK) Clawed clamp 42/42
(SAFETY®/AXIAL) Clawed clamp 42/27
(feeder)
(calves headlocks)
21
2015
22
OCTOBER
2015
23
HEADLOCKS
HEADLOCK
2-BAR PANEL
FOR FATTENING
NEW
2-BAR PANEL FOR FATTENING WITH OCTAGONAL PROFILE
Panel for fattening with no welding, made of 2 octagonal pipes 102 mm with
a 100x60 spacer mounted on clamps and adjustable to its 2 ends and
raisable by rotation.
NEW
PE0204 Panel of 4 m (with no spacer) 78 kg
PE0205 Panel of 5 m (1 spacer 100 x 60) 100 kg
PE0206 Panel of 6 m (1 spacer 100 x 60) 116 kg
PE0292 Reverse bracket + 2 eyebolts 19 kg
PR0298 Inclination fitting (2 per panel) the unit 0,63 kg
PE0293
RETAIL
Fattening spacer 2-bars
PE0290 End for 2-bar fattening 13 kg with clamps
TR9104 Octagonal tube Ø 102 L 3,46 m (panel of 4 m) 26 kg
TR9105 Octagonal tube Ø 102 L 4,46 m (panel of 5 m) 34 kg
TR9106 Octagonal tube Ø 102 L 5,46 m (panel of 6 m) 42 kg OCTAGONAL OCTAGONAL
PE0293 Fattening spacer 2-bars with clamps 6 kg Ø 102 mm Ø 114 mm
360 mm
Fattening
572 mm
584 mm
spacer FRAME WITHOUT
100 x 60 WELDING
100 x 60
PE0290
Fattening end for 2-bar
1 m to 1,15 m
LAYOUT
24 2-BAR PANEL FOR FATTENING
OCTOBER
Raisable
by rotation
FEED FRONTS
NO
NUT
Nut
22 mm
Octagonal Ø 114 mm
Reverse bracket
WARNING ! PE0292
For your safety, be careful when rotating the
fatteNing panel, please hold it so it doesn’t
fall down.
type Jourdain
25
2015
3-BAR PANEL
FOR FATTENING
NEW
3-BAR PANEL NEW
Panel for fattening with any welding, made of 2 octagonal bars 102 mm with
a 100x60 spacer mounted on clamps and adjustable to its 2 ends.
3rd tube (central) raisable with a pin.
PE0304 Panel of 4 m complete 116 kg
PE0305 Panel of 5 m complete 136 kg
PE0306 Panel of 6 m complete 156 kg
Retail
PE0390 End for 3-bar panel 18 kg
PE0393 Spacer for 3-bar panel 11 kg
TR9104 Octagonal tube Ø 102 L 3,46 m (panel of 4 m) 26 kg
TR9105 Octagonal tube Ø 102 L 4,46 m (panel of 5 m) 34 kg
TR9106 Octagonal tube Ø 102 L 5,46 m (panel of 6 m) 42 kg
TU9764 Tube Ø 60 mm of 4 m 16 kg
TU9765 Tube Ø 60 mm of 5 m 20 kg
TU9766 Tube Ø 60 mm of 6 m 24 kg
Ø 60 mm
0,94 m
FRAME WITHOUT
Adjustable
WELDING Adjustable
26
OCTOBER
June
FEED FRONTS
3rd tube up
3rd tube in the middle
3rd tube down
30/35 cm
50 cm
+15/18 cm IMPERATIVE
LAYOUT
FOR FATTENING 3-TUBE
27
2015
2015
MILKING NECK
BAR Ø 60 MM
28
OCTOBER
WARNING !
Mind the sealing direction, the flat
part indicates the direction.
FEED FRONTS
MILKING NECK BAR Ø 60 MM
Only for dairy cows.
For 5 m or 6 m bars, use an intermediate post.
LO9937 Support mounting on HEA Pillar 5 kg
(1 short tube + 1 BP end
NEW
+ 1 robust strap with bolt 10/80 mm)
LO9938 Support mounting on Octagonal post 6 kg
(1 short tube + 1 BP end + 1 BLS strap
+ 1 robust strap with bolt 10/80 mm)
LO9943 Connecting bar Texane Ø 70 mm (to drill) 5 kg
TU9764 Tube Ø 60 mm of 4 m 16 kg
TU9765 Tube Ø 60 mm of 5 m 20 kg
TU9766 Tube Ø 60 mm of 6 m 24 kg
or 10 cm under the withers
1 m to 1,15 m
45/55 cm
+15/18 cm
IMPERATIVE
For 5 m or 6 m, use an intermediate
post.
29
2015
FREE-SERVICE
DIAGONAL
Ø 60 mm
0,94 m
Ø 42 mm
3 heifer guards
ø 102mm
55 / 65 cm
45 / 55 cm
+15/18 cm IMPERATIVE
LAYOUT
DIAGONAL
30
OCTOBER
DIAGONAL
MODULE
FEED FRONTS
PO0418
Diagonal Module A Diagonal Bar
Adult 320 to 400 mm Ø 42,4 mm
Heifer 270 to 320 mm
940 mm
425 mm
DIAGONAL Module
The modules allow to install panel on request to equip all spaces and all spans out of standard
PO0418 Diagonal bar Ø 42,4 mm 2 kg
PO0419 Diagonal bar Ø 42,4 mm with guard 3,5 kg
PO0419
FRAME Diagonal MODULE Diagonal Bar
MO0436 Frame of 2 m Ø 60 mm 24 kg Ø 42,4 mm
MO0437 Frame of 3 m Ø 60 mm 31 kg with guard
MO0438 Frame of 4 m Ø 60 mm 38 kg
MO0439 Frame of 5 m Ø 60 mm 47 kg
MO0440 Frame of 6 m Ø 60 mm 54 kg
31
2015
FREE-SERVICE
FESTON
FREE-SERVICE FESTON
Free-service Panel Feston to reduce feed wastage.
PT0324 6 spaces on 4 m 66 kg LS Feston A B
PT0325 7 spaces on 5 m 91 kg 6 spaces on 4 m 560 mm 235 mm
PT0326 8 spaces on 6 m 107 kg 7 spaces on 5 m 620 mm 210 mm
8 spaces on 6 m 670 mm 245 mm
Ø 60 mm
A Ø 42 mm
0,94 m
+15/18 cm IMPERATIVE
LAYOUT
FESTON
32
OCTOBER
June
MODULAR
TROUGH
FEED FRONTS
GALVANIZED
MODULAR TROUGH
Made of galvanized steel sheet thickness 20/10e with half-round form.
Adjustable in height and in inclination.
AU2211 Complete trough 2,00 m 73 kg
AU2212 Complete trough 2,50 m 84 kg
AU2213 Complete trough 4,00 m 130 kg
AU2214 Complete trough 4,50 m 141 kg
AU2215 Complete trough 5,00 m 152 kg
AU2216 Complete trough 6,00 m 187 kg
REtail
AU9915 End piece 13 kg
AU9916 Intermediate chair 10 kg
AU9917 Trough steel sheet 2,50 m 58 kg
AU9918 Trough steel sheet 2,00 m 47 kg
Anti-rejection edge
400 mm
AU9916
Intermediate chair
maxi
AU9915
Adjustable end piece WARNING !
Due to aggressiveness of foods on Zinc and Steel, it is essential to apply a food
grade bituminous paint inside troughs before any use, and then periodically.
It is FORBIDDEN to use the bituminous paint TR0005 in the troughs.
33
2015
2015
34
Mars
OCTOBER
June
2015
2015
2015
35
FREE-SERVICE
FEED FRONTS
BARRIER
EX4
60 mm 300 mm Ø 60 mm Ø 49 mm
1,15 m
Anti-return Ends
210 mm
system in dome
Eyebolt Ø 22 mm
EX4 Back
Anti return
system
Eyebolt Ø 22 mm
+ 3 nuts
Ends in
Cross steel dome
ring
Closed
UNIQUE!
Ø 60 mm steel in TSE 275
Resistant to bending
PANEL EX4 Front Panel EX4
60 mm 300 mm Ø 60 mm 60 mm
940 mm
1,15 m
Ø 49 mm
210 mm
Eyebolt
Eyebolt Ø 22 mm Ø 22 mm
EX4 Back
36
OCTOBER
EX4
Raisable by rotation
EX4
GATES AND
PANELS
TELESCOPIC 4 BARS PANELS & GATES
Main body in pipe Ø 60 mm. Expandable part pipe Ø 49 mm.
Spacers Ø 49 mm adjusted for welding, 4 tightening grub screws,
reinforced eyebolt Ø 22 mm and 3 nuts on cross steel ring.
Raise the height by rotation of the gate / panel.
GATE EX 4
BA1700 Gate EX 4 of 1/2 m 39 kg
BA1701 Gate EX 4 of 2/3 m 55 kg
BA1702 Gate EX 4 of 3/4 m 71 kg
714 mm
BA1703 Gate EX 4 of 4/5 m 90 kg
(axis/pin)
BA1704 Gate EX 4 of 5/6 m 104 kg
BA1705 Gate EX 4 of 6/7 m 126 kg
PANEL EX 4
BA1800 Panel EX 4 of 1/2 m 41 kg
BA1801 Panel EX 4 of 2/3 m 57 kg
BA1802 Panel EX 4 of 3/4 m 73 kg
Eyebolt
BA1803 Panel EX 4 of 4/5 m 92 kg Ø 22mm
BA1804 Panel EX 4 of 5/6 m 106 kg
BA1805 Panel EX 4 of 6/7 m 128 kg
Retail
BA9959 Front Gate EX 4 23 kg BA5010
BA9960 Front Panel EX 4 25 kg
BA5010 EX 4 Back of 1/2 m (714mm Axis/pin) 16 kg SHORT ex 4
BA9961 EX 4 Back of 2/3 m (1614mm Axis/pin) 32 kg
BA9962 EX 4 Back of 3/4 m (2614mm Axis/pin) 48 kg BACK
BA9963 EX 4 Back of 4/5 m (3614mm Axis/pin) 67 kg
BA9964 EX 4 Back of 5/6 m (4614mm Axis/pin) 81 kg
BA9965 EX 4 Back of 6/7 m (5614mm Axis/pin) 103 kg
REMEMBER
The gates are easy to handle. We recommend them in places with regular passage.
The Panels are equipped with pins at both ends. We recommend them for use as livestock separation. Gates and Panels use
the same Back part.
37
2015
BARRIER
EX4
2,10 m 2,10 m
360 mm
ADJUSTABLE
WARNING !
Please use plain ADJUSTABLE
posts 2,13 m
with straps.
NEW
FRONT EX 4 for MODEL FRONT EX 4 CUT OUT
BA5025 DRINKING TROUGH BA5035 FOR DRINKER BOWL
Ø 60 mm
Ø 60 mm
1,30 m 1,30 m
1,32 m
1,32 m
Safety stainless
steel spring
400 mm 300 mm
FRONT EX 4
CALVES PASS
BA2097
38
OCTOBER
June
OPTIONS
GATES AND
PANELS
OPTIONS 4 PIPES
BA5020 Front Gate EX 4 «long» (2,55 m) 35 kg
BA5022 Front Panel EX 4 «long» (2,55 m) 36 kg
BA5025 Front EX 4 for drinking trough 26 kg
BA5035 Front EX 4 cut out for drinker bowl 25 kg
(Trough and support not included) NEW
BA2097 Front EX 4 for calves pass adjustable 37 kg
BA2096 Front man pass EX 4 34 kg
BA2080 Front EX 4 Duo with service gate 38 kg
BA2091 Service Gate Duo alone 7 kg
BA5000 Eyebolt Ø 22 mm + 3 nuts 0,7 kg
REMEMBER
- Because of its fixed part, the calf pass only allows + 200 and - 400 mm on the length of the Panel.
Example : 4/5 m axis post will become 4,60 / 5,20 m.
All posts are Standard EX posts EXCEPT for Drinker Trough (ref. BA5025) which will have to be PLAIN post + straps.
OUR STRENGTHS
- Grinding of our panels and gates spacers 49 mm guarantees a bigger rigidity to animals pushing
- Pass for calves and drinkers are easy to use and very sturdy. (Bottom part maintained on top part)
39
2015
2015
BARRIER
EX5
Ø 49 mm
1,15 m
End
210 mm
in dome
Eyebolt Ø 22 mm
Anti-return system
Anti-Return
system
Eyebolt Ø 22 mm
+ 3 nuts
End in
Cross steel dome
ring
Closed
UNIQUE!
Ø 60 mm steel in TSE 275
Resistant to bending
PANEL EX5 Front Panel EX5
60 mm 210 mm Ø 60 mm 60 mm
940 mm
1,15 m
210 mm
Ø 49 mm
Eyebolt Ø 22 mm Eyebolt
Ø 22 mm
40
OCTOBER
EX5
EX5 Raisable by
rotation
GATES AND
PANELS
TELESCOPIC 5 BAR PANELS & GATES
Principal body in pipe Ø 60 mm. Expandable part pipe Ø 49 mm.
Spacers Ø 49 mm adjusted for welding, 4 tightening grub screws,
reinforcement eyebolt Ø 22 mm and 3 nuts on cross steel ring.
Can be rotated to increase/decrease hanging height.
GATE EX 5
BA1900 Gate EX 5 of 1/2 m 45 kg
BA1901 Gate EX 5 of 2/3 m 65 kg
BA1902 Gate EX 5 of 3/4 m 85 kg
BA1903 Gate EX 5 of 4/5 m 107 kg
BA1904 Gate EX 5 of 5/6 m 128 kg 714 mm
BA1905 Gate EX 5 of 6/7 m 150 kg (axis/pin)
PANEL EX 5
BA2000 Panel EX 5 of 1/2 m 48 kg
BA2001 Panel EX 5 of 2/3 m 67 kg
BA2002 Panel EX 5 of 3/4 m 87 kg
BA2003 Panel EX 5 of 4/5 m 110 kg
BA2004 Panel EX 5 of 5/6 m 130 kg
Eyebolt
BA2005 Panel EX 5 of 6/7 m 152 kg
Ø 22mm
REtail
BA9969 Front Gate EX 5 27 kg
BA9970 Front Panel EX 5 30 kg
BA5011 Back for EX 5 1/2 m (714mm Axis/pin) 18 kg BA5011
BA9971 Back for EX 5 of 2/3 m (1614mm Axis/pin) 38 kg
BA9972
BA9973
Back for EX 5 of 3/4 m (2614mm Axis/pin)
Back for EX 5 of 4/5 m (3614mm Axis/pin)
58 kg
80 kg
SHORT BACK
BA9974 Back for EX 5 of 5/6 m (4614mm Axis/pin) 101 kg ex 5
BA9975 Back for EX 5 of 6/7 m (5614mm Axis/pin) 123 kg
REMEMBER
The gates are easy to handle. We recommend them in places with regular passage.
The Panels are equipped with pins at both ends. We recommend them to be used as livestock separation.
Gates and Panels have the same Back part.
41
2015
BARRIER
EX5
2,10 m 2,10 m
360 mm
ADJUSTABLE
WARNING !
Please use plain
posts 2,13 m ADJUSTABLE
with straps.
NEW
FRONT EX 5 MODEL FRONT EX 5 CUT OUT
BA5026 FOR DRINKING TROUGH BA5036 FOR DRINKER BOWL
Ø 60 mm
1,30 m
FRONT EX 5 DUO
1,32 m
WITH
SERVICE GATE
BA2090
Safety stainless
steel spring 400 mm
2,10 m
FRONT EX 5
CALVES PASS
BA2098
42
OCTOBER
OPTIONS
GATES AND
PANELS
BA5021 Front Gate EX 5 «long» 2,55 m 44 kg
BA5023 Front Panel EX 5 «long» 2,55 m 42 kg
BA5026 Front EX 5 for drinking trough 30 kg
BA5036 Front EX 5 cut out for drinker bowl
(Trough and support not included) 29 kg NEW
BA2098 Front EX 5 for calves pass
adjustable 40 kg
BA2090 Front EX 5 DUO with service gate 42 kg
BA2091 Service Gate DUO alone 7 kg
BA5000 Eyebolt Ø 22 mm + 3 nuts 0,7 kg
REMEMBER
- Because of its fixed part, the calves passonly allows + 200 and - 400 mm on the length of the Panel.
Example : 4/5 m axis post will become 4,60 / 5,20 m.
All posts are Standard EX posts EXCEPT for Drinker Trough (ref. BA5026) which will have to be PLAIN post + straps.
DOUBLEX EX5
This part allows to fit 2 fronts together to make up a separation barrier such as the example on the picture.
BD0150 Doublex EX5 2/3 m 35 kg
BD0250 Doublex EX5 3/4 m 50 kg
BD0350 Doublex EX5 4/5 m 71 kg
Doublex EX5
43
2015
FRONT
AUTOLOCK
type Jourdain
Locking position
WARNING !
Very handy as a service gate, the use of this front gate is, however, dis-
couraged as separation of groups of animals in a long length.
44
OCTOBER
GATES AND
PANELS
FRONT AUTOLOCK EX4 AND EX5
BA5054 Front AUTOLOCK EX4 30 kg
BA5055 Front AUTOLOCK EX5 35 kg
AUTOLOCK ACCESSORIES
FE2153 Strap Autolock single SSV Ø 102 mm 3 kg
FE2154 Strap Autolock Ø 102 double DSV 3,4 kg
45 mm
Adaptable bolt
Autolock + staples
FE2118
To install an Autolock bolt
on a front panel EX,
Please order a BAG 134 :
2 60 mm clips
Adaptable bolt Autolock
Strap Autolock DSV with counter plate
Double Support
of Bolt out of alignement FE2119
FE2154
45
2015
RAISABLE
6th BAR
BA2101
Ø 60 mm TU9765
DOWN position
type Jourdain
RAISED position
46
OCTOBER
June
NEW
FOR EX5 BA2101
GATES AND
PANELS
RAISABLE 6th BAR FOR EX5
This raisable support allows you to add a 6th bar to prevent calves from going under-
neath the gate. When there’s more manure, the 6th bar can be raised up.
Foresee 1 support BA2101 till 3 m. For longer barriers, use 3 supports BA2101.
WARNING !
For your safety, be really careful while rotating the 6th bar.
47
2015
2015
48
OCTOBER
June
2015
2015
49
GATES AND
BARRIER
PANELS
FIELD
GATE
Ø 42 mm
1,15 m
End in
210 mm
dome
Grindings Ø 34 mm
Eyebolt Ø 22 mm
Anti-return system
Anti-return
system
Eyebolt Ø 22 mm
+ 3 nuts Grindings
Ø 34 mm
End in
Cross steel dome
ring
Closed
FIELD PANEL
Front of field panel
45 mm 230 mm 45 mm
940 mm
Ø 42 mm
1,15 m
210 mm
Grindings Ø 34 mm
Eyebolt Ø 22 mm
50
OCTOBER
June
GATES AND
BARRIER
PANELS
FIELD GATES 5 BARS
Made in pipes Ø 42 mm. Expandable part in pipe Ø 34 mm.
Spacers Ø 34 mm, 3 fittings, reinforced eyebolt Ø 22 mm with
3 nuts on cross steel ring. Reversal by simple raising.
FIElD GATE
BH2300 Field gate 2/3 m 42 kg
BH4300 Field gate 3/4 m 53 kg
BH4301 Field gate 4/5 m 68 kg
BH4302 Field gate 5/6 m 80 kg
FIELD PANEL
Suits perfectly to calves pen.
PN4608 Field panel 2/3 m 42 kg
BH4310 Field panel 3/4 m 53 kg
BH4311 Field panel 4/5 m 68 kg
BH4312 Field panel 5/6 m 80 kg
Retail
BH4350 Front field gate 18 kg
BH4351 Front field panel 18 kg
PN4688 Back field 2/3 m (1614mm Axis/pin) 22 kg
BH4355 Back field 3/4 m (2614mm Axis/pin) 35 kg
BH4356 Back field 4/5 m (3614mm Axis/pin) 50 kg
BH4357 Back field 5/6 m (4614mm Axis/pin) 62 kg
51
2015
2015
SERVICE GATE
5 BARS
45 mm
Ø 34 mm Ø 42 mm
940 mm
1,15 m
210 mm
Eyebolt Ø 22 mm
Ø34 mm
52
OCTOBER
HALF NETTED
FIXED GATE
GATES AND
PANELS
TELESCOPIC SERVICE GATE 5 PIPES
Given dimensions are not centre-centre post but from the end of the
square tube to the end of the other square tubes.
PN4605 Service Gate EX 5 60/100 cm 18 kg
PN4607 Service Gate EX 5 110/150 cm 24 kg
PN4608 Service Gate EX 5 160/300 cm 42 kg
PN4680 Front Service Gate EX 5 long 60 cm 7 kg
PN4685 Back EX 5 60/100 cm 10 kg
PN4687 Back EX 5 110/150 cm 15 kg
PN4688 Back EX 5 160/300 cm 22 kg
PN9982 Gate Lach 2,5 kg
FE2113 Wall bracket Autolock (the pair) 3 kg FE2153
FE2153 Strap 102 mm SSV Autolock Strap 102 mm
for central lock 3 kg for central lock
Options
BH4352 Front Field panel with cut out for drinking bowl.
Suits perfectly to calves pen 18 kg
BH4353 Front Service Gate 150 cm
with central lock 20 kg
X
Ø 42 mm
Ø 34 mm Spacer 50 x 6 mm
Central lock
1,15 m
Ø 42 mm Ø 20 mm
Ø 27 mm
Ø 42 mm
Welded wire mesh
Eyebolt Ø 22 mm
50 x 50 mm
53
2015
2D
ANTI-ROTATION OCTAGONAL
3D
4 mm
1D POST
TR1613
WARNING !
Sleeve cover
Mind the way of sealing the post, the round part indicates the Ø 102 mm
direction
4D
mm
195
EX
1,68 m
EX
Second sleeve
limiting corrosion TR4100
Ø 102 mm
Sealing sleeve Dismantling sleeve
Ø 102 mm 50 Ø 102 mm with
0m
m damp-proof flange
and base
TR1680
Octagonal Post Strap Ø 102 mm
on PLAIN plate double bracket bolt
OCTAGONAL SLEEVE
100 mm
m
500 m FE2151
MOUNTING ADVICE
Never seal an Octagonal sleeve alone. Seal it always with the post inside and pay attention of the direction of the post with straps.
Sleeve is marked 1D, 2D, 3D, 4D for the right position of the sealing. Place the protection sleeves before mounting the
post.
54
OCTOBER
Ø 102 mm
HARDWARE
OCTaGONAL Post Ø 102 mm x 4 mm
POSTS +
TR2130 Octagonal Post Plain 2,13 m 21 kg
TR2430 Octagonal Post Plain 2,43 m 24 kg
TR2730 Octagonal Post Plain 2,73 m 27 kg
TR2131 Octagonal Post 1 direction EX (welded) 22 kg
TR2132 Octagonal Post 2 directions EX + EX (welded) 23 kg
TR2133 Octagonal Post 3 directions EX + EX + EX (welded) 24 kg
TR2134 Octagonal Post 4 directions EX + EX + EX + EX (welded) 25 kg
TR2135 Octagonal Post 2 directions L EX + EX (welded) 23 kg
TR1680 Octagonal Post on plate Plain 1,68 m + gussets 8 mm 19 kg
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint TR0005 on the
following material : bottom of posts, bottom of back and Freestall pins, knee pads, support ... and then periodically.
GATE LATCH
PN9982 Gate latch 2,5 kg
BITUMINOUS PAINT
TR0005 Bituminous paint, can 5 liters (0,5 l / m²) 5 kg
55
2015
2D
ANTI-ROTATION
OCTAGONAL
3D
4 mm
1D POST
WARNING !
Mind the way of sealing the post, the round part indicates
the direction
4D
TR1615
mm
230 Sleeve cover
Ø 140 mm
EX
EX
FE2190 TR4140
450 mm
100 mm
56
OCTOBER
Ø 140 mm
HARDWARE
OCTAGONAL Post Ø 140 mm x 4 mm
POSTS +
ANTI-ROTATION
TR2170 Octagonal Post Plain 140 mm, 2,13 m 28 kg
TR2175 Octagonal Post Plain 140 mm, 2,43 m 33 kg
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint TR0005 on the
following material : bottom of posts, bottom of back and Freestall pins, knee pads, support ... and then periodically.
bituminOUS PAINT
TR0005 Bituminous paint can of 5 litres (0,5 l / m²) 5 kg
MOUNTING ADVICE
Never seal an Octagonal sleeve alone. Always seal it with the post inside and pay attention of the direction of the
post with straps.
Sleeve is marked 1D, 2D, 3D, 4D for the right position of the sealing. Place the protection sleeves before
mounting the post.
57
2015
2D
ROUND
3D
4 mm
1D POST
TR1613
Sleeve cover
Ø 102 mm
4D
mm
195
EX
1,68 m
EX
FE1603
Sleeve for Sleeve for Round post
Round post 50 Ø 102 mm
Ø 102 mm 0m
m FE2112
Counter Plate
FE2198
Post Round
plain on plate
m
500 m
MOUNTING ADVICE
Never seal a sleeve alone. Always seal it with the post inside and be very careful with the position of the post with its straps.
58
OCTOBER
Ø 102 mm
HARDWARE
ROUND POST Ø 102 mm x 4 mm
POSTS +
FE2120 Round Post Plain 2,13 m 21 kg
FE2192 Round Post Plain 2,43 m 24 kg
FE2193 Round Post Plain 2,73 m 27 kg
FE2198 Round Post Plain on plate 1,68 m + gussets 8 mm 19 kg
FE2180 Replacement Post Plain 2,13 m 21 kg
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint TR0005 on the
following material : bottom of posts, bottom of back and Freestall pins, knee pads, support ... and then periodically.
GATE LATCH
PN9982 Gate latch 2,5 kg
Bituminous Paint
TR0005 Bituminous paint can of 5 litres (0,5 l / m²) 5 kg
Counter Plate
FE2112 Counter plate (200 x 200 x 8 mm) 2,3 kg
59
2015
BRACKETS
MULTIFIX BRACKET
7 mm
Ø 13 mm
30 mm
44 mm
NEW L
DE
MO
62 mm
40 mm
FE2117
70 mm Ø 8 mm
NEW L
130 mm
100 mm
DE
MO
133 mm
FE2114
SINGLE BRACKET
60 mm
40 mm
FE2102
130 mm
100 mm
RIGIPLI
BRACKET
FE2110
60
OCTOBER
BRACKETS
HARDWARE
MULTIFIX BRACKET
POSTS +
FE2117 Bracket Multifix with bolt (the pair) 1,2 kg
Delivered with 1 bolt Ø 14 mm + 1 nut NEW
FE2099 Chain with snap hook (the pair) 0,32 kg
EXTENDED BRACKET MULTIFIX
FE2114 Extended bracket for mounting in H (the pair) 2,8 kg
simple bracket
FE2102 Simple bracket (in separation) (the pair) 2 kg
BRACKET «END OF WALL»
FE2107 For wall of 150 mm (the pair) 8 kg
FE2108 For wall of 200 mm (the pair) 9 kg
double BRACKET
FE2101 Double bracket (in front) (the pair) 4,4 kg
triple BRACKET Chain with
FE2109 Triple bracket (the pair) 6 kg snap hook
bracket RIGIPLI FE2099
FE2110 Bracket RIGIPLI 7 kg
40 mm
DOUBLE bracket
125 mm
55 mm
FE2101
120 mm
100 mm
40 mm 70 mm
TRIPLE BRACKET
125 mm
55 mm FE2109
100 mm
61
2015
DRINKING BOWL
MOUNTING
DRINKING
MOUNTING BETWEEN POSTS
Sheet metal support made for most drinking bowls. Mounted on
straps, adjustable in height. Don’t forget to wedge the sheet metal
on the strap.
Mounting with post Ø 76 mm :
dimension Center/center post X = 435 mm
Mounting with post Ø 102 mm :
dimension Center/center - post X = 470 mm
Mounting with post Ø 140 mm :
dimension Center/center - post X = 510 mm
Exemple of mounting on 102 mm :
- 1 metal sheet + 2 guards
- 2 posts octagonal Ø 102 mm plain
- 4 straps octagonal 102 mm 1 Direction
Metal sheet support FE2147 - 2 straps octagonal 102 mm 2 Directions
for drinking bowl - 4 pairs of half-straps round Ø 102 mm plain
+ 2 guards (for the sheet metal)
- 4 Trèfle sleeve for post Ø 102 mm (option)
FE2147 Metal sheet + 2 guards 7 kg
MOUNTING ON BARRIER
Metal sheet adaptable on barrier EX4 and EX5. On EX4 barrier don’t
forget to cut the metal sheet for the safety of the animals.
FE2148 Metal sheet support for drinking bowl on barrier 5,3 kg
(Supplied with 4 clips Ø 60 mm) Metal Sheet support for
drinking bowl
FE2148
MOUNTING ON BARRIER
62
OCTOBER
Universal
guard bar
FE2149
HARDWARE
MOUNTING FOR DRINKING TROUGH OR DRINKER WITH BALL
POSTS +
Made of 2 posts Ø 102 mm to seal and 1 universal guard bar on the top part, made of 2 pipes Ø 60 mm with 1 standard
end piece on both sides.
Example of mounting in 102 mm :
- 2 universal anti passage bars,
- 2 posts Octagonal Ø 102 mm to seal,
- 4 straps Octagonal 102 mm with 1 Direction,
- 2 straps Octagonal 102 mm with 2 Directions,
- 4 standard end pieces
FE2149 Universal guard bar 2,3 kg
(Remember to order 2 end pieces for each bar)
500 mm 270 mm
The universal guard bar has been dimensioned for a drinker with ball. It must be
shortened for a drinking trough.
63
2015
64
OCTOBER
June
2015
2015
65
POSTS +
HARDWARE
FREESTALL
BLS
2,1
0t
o2
1,15 to 1,20 m
,20
740 mm
LO9936
Strap Robust
thickness 4 mm
± 1,80 m
300 mm
Slope 3 to 5 %
± 250 mm
300 mm Sealing of
300 x 300 mm
Width between Freestall pins
from 1,15 m to 1,20 m.
TEXANE 2,08 m BLS Dimensions are given on an
indicative basis.
L 2,13 m Depending on the lengths
please adapt on the livestock
and bedding.
2,1
1,25 to 1,30 m
5t
o2
890 mm
,20
m
LO3156
Strap Octagonal BLS
(pair)
± 1,80 m
150 mm
Slope 3 to 5 %
66
OCTOBER
WARNING !
Mind the position of sealing the
post.
FREESTALLS
740 mm
LO3100 Freestall pin type «EURO Milking» Plain 1,95 m 19 kg
LO3108 Freestall pin type «EURO Milking» Plain 2,08 m 20 kg EURO
LO3115 Freestall pin type «EURO Milking» Plain 2,15 m 21 kg
Neck bar
LO9936 «Robust» clamp 60/49 thickness 4 mm 1,7 kg
1,66 m
Ø 49 mm
Ø 49 mm
LO9941 TR3189 TR3190
ST9943 Post Freestall Post Freestall
Octagonal Plain Octagonal Plain
Straight coupling Neck bar support bracket to seal on plate
for pipe Ø 49 mm
WARNING !
It’s recommended to apply before use the bituminous paint TR0005 on the bottom of post and Freestall and
periodically to protect.
67
2015
FREESTALL
BLD
2,1
1,15 to 1,20 m
0t
o2
740 mm
,20
m
± 1,80 m
300 mm
Slope 3 to 5 %
Foundation of
± 250 mm 300 mm 300 x 300 mm
B= Bedding length
2,1
1,25 to 1,30 m
5t
o2
890 mm
,20
m
± 1,80 m
150 mm
Slope 3 to 5 %
FREESTALLS
LO3100 Freestall pin type «EURO Milking» Plain 1,95 m 19 kg
LO3108 Freestall pin type «EURO Milking» Plain 2,08 m 20 kg
LO3115 Freestall pin type «EURO Milking» Plain 2,15 m 21 kg 890 mm
1,32 m
TR3189 Post Freestall Octagonal Plain to seal 1,66 m 14 kg
TR3190 Post Freestall Octagonal Plain on plate 1,32 m 15 kg
TR3180 Post Freestall Octagonal Plain on plate 1,66 m 16 kg
(Freestall deep bed)
Neck bar
LO9936 Strap «Robust» 60/49 thickness 4 mm 1,7 kg
TU9756 Pipe Ø 49 mm 6 m bar (neck bar) 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg TR3189 TR3190
LO9941 Neck bar support bracket Ø 49 mm (each) 0,6 kg Freestall Post Freestall Post
Octagonal Plain Octagonal Plain
to seal on plate
Ø 49 mm
LO9936 ST9943
Strap Robust Ø 49 mm
thickness 4 mm LO9941
Straight coupling
for pipe Ø 49 mm Neck bar support bracket
WARNING
It’s essential to apply before use the bituminous paint TR0005 on the bottom of post and Freestall and then
periodically.
69
2015
70
OCTOBER
June
FREESTALLS
71
2015
2015
MOUNTING
SIMPLE CLICK
Freestall pins
Quick mounting Octagonal Post 102 mm quick mounting
Protection part
Bolt 12/90
LO3120
1 2 3
A= 1,95 m 2,08 m 2,15 m
B= 2,08 m 2,21 m 2,28 m
2,1
0t
1,15 to 1,20 m
o2
,20
740 mm
LO9936
Strap Robust
thickness 4 mm
± 1,80 m
Slope 3 to 5 %
150 mm
72
OCTOBER
WARNING !
Mind the position of sealing
the post.
FREESTALLS
890 mm
FREESTALL PIN TEXANE
LO3103 Freestall pin type «TEXANE Milking» Plain 2,08 m 20 kg TEXANE
Foresee 1 pair of end piece CLICK LO3120 for each Freestall pin.
LO3120 End piece “CLICK” Ø70 mm (the pair) 4,8 kg
Neck bar
LO9936 Strap «Robust» 60/49 thickness 4 mm 1,7 kg
TU9756 Pipe Ø 49 mm 6 m bar (neck bar) 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg TR3153 TR3190
LO9941 Neck bar support bracket Ø 49 mm (each) 0,6 kg
Ø 49 mm
LO9940
60 mm
60 mm LO9941 LO3155
73
2015
FREESTALL
DOUBLE CLICK
2,1
0t
o2
740 mm
,20
1,20 m
± 1,80 m
300 mm
Slope 3 to 5 %
Ø 49 mm
74
OCTOBER
WARNING !
Mind the position of sealing
the post.
FREESTALLS
FREESTALL PIN TEXANE
LO3103 Freestall pin type «TEXANE Milking» Plain 2,08 m 20 kg 890 mm
Neck bar
LO9936 Strap «Robust» 60/49 thickness 4 mm 1,7 kg
TU9756 Pipe Ø 49 mm 6 m bar (neck bar) 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg
LO9941 Neck bar support bracket Ø 49 mm (each) 0,6 kg
60 mm 60 mm
LO3155
LO9940
Connecting casing
Frontal support bracket square for frontal bar
75
2015
FREESTALL
RELAX
2,1
5t
o2
,20 LO9936
m Strap Robust
1,27 m
60/49 mm
920 mm
260 mm
± 1,80 m
150 mm
Slope 3 to 5 %
LO3167
400 mm Sealing of 400 x 150 mm ± 250 mm Triple connecting
without slope clamp «RELAX»
double line
2,1
5t
o2
± 1,27 m
890 mm
,20
m
40 mm
± 1,80 m
Slope 3 to 5 %
150 mm
FREESTALLS
LO3160 Freestall pin type «RELAX» Ø 60 x 3,2 mm 22 kg
LO3166 Clamp 49/60 «RELAX» single line 0,9 kg
LO3167 Triple connecting clamp «RELAX» double line 1,6 kg
LO3168 Concrete strap «RELAX» in 60 x 8 mm (the pair) 1,5 kg
LO9936 Strap «robust» 60/49 - 4 mm 1,7 kg
TU9756 Neck bar and “stop bar” Ø 49 length 6 m 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg
LO9931 Freestall SP support in 6 mm steel sheet
to peg into the ground 8 kg
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint TR0005 on the
following material : bottom of post, bottom of barrier and Freestall pin, knee pad, support ... and then periodically.
FREESTALL PIN
RELAX
77
2015
78
OCTOBER
June
FREESTALLS
79
2015
2015
MOUNTING
WARNING ! LO9943
Link bar to be counter-drilled
Do NOT mount the Freestalls Euro with a SP during mounting
support (neck bar is too low at 1,12 m).
2,1
5t
± 1,27 m
o2
890 mm
,20
340 mm m
(bed 5 m)
± 1,80 m
slope 3 à 5 %
± 250 mm 840 mm (bed 5 m)
Two foundations of 400 x 150
mm without slope
Bedding from 4,80 m to 5,20 m
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous
paint TR0005 on the following material : bottom of post, bottom of barrier and Freestall pin, knee pad,
support ... and then periodically.
80
OCTOBER
TEXANE SP
FREESTALLS
LO9943 Link bar Ø 70 mm (to be counter-drilled) 5 kg
FREESTALL SP SUPPORT
LO9931 Freestall SP support in 6 mm metal sheet
to mount and fix on the floor. 8 kg
FREESTALL WEDGE
FE2135 Freestall wedge 35 x 8 Length 197 mm 0,39 kg NEW
FREESTALL WEDGE
81
2015
NEW FREESTALL
COWFLEX
o2
,30
890 mm
Slope 4%
± 250 mm
Width axis between Freestall pins from 1,15 m to 1,20
m.
MOUNTING COWFLEX BLD Dimensions are given on an indicative basis.
Depending on the lengths please adapt on the
livestock and bedding.
2,17 m
2,2
0t
± 1,25 to 1,30 m
o2
,30
890 mm
± 1,80 m
Slope 4%
± 250 mm Foundation of 300 x 300
mm without slope
4,86 m
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint TR0005 on the
following material : bottom of post, bottom of barrier and Freestall pin, knee pad, support ... and then periodically.
type Jourdain
82
OCTOBER
FREESTALL COWFLEX
The Freestall Cowflex is the perfect balance between rigidity and flexibility. Thanks to its PEHD covered metallic lower part with
3 pivot points the Freestall Cowflex brings more comfort on the contact area (animal/freestall)
The sturdy metallic frame keeps the cow straight in the freestall and the animal cannot turn around.
The flange-webbing guide (thickness 5 mm) rigidifies the freestall; the webbing provides a comfortable contact at the withers.
LO3208 Pin Cowflex plain 2,08 m 26 kg
LO9932 Webbing guide 60/49 thickness 5 mm 2,6 kg
FREESTALLS
LO9933 Adjustable wall support 5,2 kg
(included 1 Robust strap and 1 strap clamping flat)
LO9934 Webbing 50 mm (100 m roll) 8,5 kg
LO9935 Webbing pawl 1,5 kg
LO9936 Strap «Robust» 60/49 thickness 4 mm 1,7 kg
TU9756 Pipe Ø 49 mm 6 m bar (neck bar) 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg
LO9941 Neck bar support bracket Ø 49 mm (each) 0,6 kg
Ball-joint Cowflex
Ergonomic curve
83
2015
FREESTALL
MOUNTING, EURO
HEIFER / CALF
HEIFER - CALF BLS EURO HEIFER EURO CALF EURO CALF
B = Length centre-post 1,70 m 1,50 m 1,30 m
12/18 months 7/12 months 4/7 months
A = Freestall pin length A= 1,70 m 1,50 m 1,30 m
B= 1,76 m 1,56 m 1,36 m
C= 590 mm 540 mm 490 mm
D= 900 mm to 1 m 800to900mm 760 to 800 mm
F E= 200 mm 150 mm 150 mm
C
D
Slope 4%
400 mm
Foundation of 400 x 150 E
mm
EURO HEIFER EURO CALF EURO CALF
1,70 m 1,50 m 1,30 m
12/18 months 7/12 months 4/7 months
A= 1,70 m 1,50 m 1,30 m
Dimensions are given on an indicative basis.
Depending on the lengths please adapt on the lives- B= 1,79 m 1,59 m 1,39 m
tock and bedding. C= 590 mm 540 mm 490 mm
D= 900 mm to 1 m 800 to 900 mm 760 to 800 mm
MOUNTING, EURO E= 200 mm 150 mm 150 mm
F= 1,80 to 1,90 m 1,60 to 1,70 m 1,45 to 1,55 m
HEIFER - CALF BLD G= 3,98 m 3,48 m 3,08 m
width 1m 900 mm 800 mm
centre-post B = Length between
freestalls
A = Freestall pin length
F
D
C
150 mm
Slope 4%
400 mm Foundation of 400 x 150
E mm
G = Bedding length
84
OCTOBER
MOUNTING
BLS - BLD
FREESTALLS
LO3105 Freestall pin type «US Heifer» Plain 1,70 m 15 kg 200
530 mm
STRAP BLS
US
Foresee 1 post and a pair of BLS LO3156 for each Freestall pin.
LO3156 Octagonal Strap BLS to fix on
octagonal post 102 mm (the pair) 5,2 kg
STRAP BLD
Foresee 1 post and 1 pair of BLD LO3157 for 2 Freestall pins.
LO3157 Octagonal Strap BLD (Strap Freestall Double) for
1,66 m
1,32 m
octagonal post 102 mm (the pair) 7,2 kg
Ø 49 mm
LO3156 LO3157 LO9936 ST9943
Octagonal Strap Octagonal Strap Strap Robust Straight coupling
BLS BLD 60/49 mm for pipe Ø 49 mm
85
2015
TR3151
FREESTALL
Strap Freestall Trèfle
CLICK simple HEIFER / CALF
MOUNTING EURO
HEIFER - CALF SIMPLE CLICK EURO HEIFER
1,70 m
EURO CALF
1,50 m
EURO CALF
1,30 m
12/18 months 7/12 months 4/7 months
centre-post B = Length
A= 1,70 m 1,50 m 1,30 m
A = Freestall pin length
B= 1,84 m 1,64 m 1,44 m
C= 590 mm 540 mm 490 mm
D= 900 mm to 1 m 800 to 900 mm 750 to 800 mm
E= 200 mm 150 mm 150 mm
F
F= 1,80 to 1,90 m 1,60 to 1,70 m 1,45 to 1,55 m
D
C
basis.
Slope 4% Depending on the lengths please adapt
400 mm E on the livestock and bedding.
Foundation of 400 x 150
mm
EURO HEIFER EURO CALVF EURO CALVF
1,70 m 1,50 m 1,30 m
MOUNTING EURO 12/18 months 7/12 months 4/7 months
A= 1,70 m 1,50 m 1,30 m
HEIFER - CALF CLICK DOUBLE B= 1,84 m 1,64 m 1,44 m
C= 590 mm 540 mm 490 mm
TR3152 D= 900 mm to 1 m 800 to 900 mm 750 to 800 mm
Octagonal Strap double E= 200 mm 150 mm 150 mm
«CLICK» F= 1,80 to 1,90 m 1,60 to 1,70 m 1,45 to 1,55 m
G= 4,08 m 3,58 m 3,18 m
B = Length centre-post width 1m 900 mm 800 mm
A = Freestall pin length between
freestalls
F
D
C
150 mm
86
OCTOBER
MOUNTING
CLICK
FREESTALLS
LO3105 Freestall pin type «US Heifer» Plain 1,70 m 15 kg EURO
NECK BAR
LO9936 Strap «Robust» 60/49 thickness 4 mm 1,7 kg
TU9756 Pipe Ø 49 mm 6 m bar (neck bar) 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg
LO9941 Neck bar support bracket Ø 49 mm (each) 0,6 kg
Ø 49 mm
60 mm 60 mm
87
2015
88
OCTOBER
June
FREESTALLS
89
2015
2015
FREESTALL
KONDOR
NEW
MODEL
FREESTALL KONDOR
This Freestall has the same shape as the Texane Freestall and its post. It cannot be adjusted and is less resistant than
a BLS/BLD Freestall and is more subject to corrosion. Use 12mm dowels directly on the bedding.
In option, you can add a knee pad support for 125mm high pressure PVC tube. Install 1 knee pad every 2 Freestalls.
LO3112 Freestall type Kondor 27 kg
LO9939 PVC support Ø 125 mm for Kondor freestall 1,4 kg
NECK BAR
LO9936 Strap «robust» 60/49 - 4 mm 1,7 kg
TU9756 Neck bar «stop bar» Ø 49 mm length 6 m 20 kg
ST9943 Straight coupling for pipe Ø 49 mm 0,5 kg
LO9941 Neck bar support bracket Ø 49 mm (the unit) 0,6 kg
ST9943
2,05 m
Ø 49 mm
2,2
0m
LO9941
1,23 m
1,8 m
255 mm
150 mm
Slope 3 to 5 %
90
OCTOBER
June
FREESTALL
ACCESSORIES
FREESTALLS
LO3169
Knee pad for PVC pipe
WEBBING GUIDE
LO9932 Webbing guide 60/49 thickness 5 mm 2,6 kg
LO9933 Adjustable wall support 5,2 kg
(includes 1 robust strap and 1 webbing support)
LO9934 Webbing 50 mm (100 m roll) 8,5 kg
LO9935 Webbing pawl 1,5 kg
LO9932
Webbing guide
LO9933 LO9934 (thickness 5 mm)
Adjustable wall support Webbing 50 mm
LO9935
Webbing pawl
91
2015
2015
E W RAISABLE
N
ROLLER GATE
Made of a metal frame with 2 adjustable ends guided on 4 rollers. Non galvanised
counter weight rolling on a 102 mm octagonal post. Please use a rope to lower it to
type Jourdain the closed position to Locking by cable on closed position.
2 guide rollers at
Ø 60 mm each end
NEW
Ø 60 mm Ø 102 mm Octagonal
CLOSE Minimum
720 mm
WARNING !
For your safety , please check the
tigthening and wear of the cables regularly.
610 mm 2
NEW
OPEN
Maximum
3m
To be mounted outside
of the scraping alley
92
OCTOBER
FREESTALL
SERVICE GATE
FREESTALLS
LO3194
Freestall adapter
SERVICE GATE
Back part made in pipe Ø 60 mm, the front part is adjustable and made in Ø 49 mm pipe.
Ø 49 mm Ø 60 mm
360 mm
Adjustable Spacer Ø 49 mm
93
2015
SAFETY
HEADLOCK
FOR CALF
4 Adjustment
Calf end
calf ends
NEW
Handle Individual
locking Safety IV control pipe ø 42mm
Strap Ø 76 mm
at each space with support with reinforcement 60 x 5
locking at each space.
NEW
760 mm
MODEL
4 Adjustment
calf ends
450 mm
2
Closed
3
Safety
}
450 mm space per calf.
VE0400 Headlock Safety IV for calf 1p/0,75 m 13 kg
VE0401 Headlock Safety IV for calf 4p/2,00 m 45 kg
VE0402 Headlock Safety IV for calf 5p/2,50 m 55 kg
VE0403 Headlock Safety IV for calf 6p/3,00 m Axis/Axis/Post 66 kg NEW
VE0404 Headlock Safety IV for calf 8p/3,50 m 88 kg
VE0405 Headlock Safety IV for calf 10p/5,00 m 120 kg
CALF EQUIPMENT
VE1404 Bucket-holder 4 spaces (bucket Ø 370 mm) 8,5 kg
VE1405 Bucket-holder 5 spaces (bucket Ø 370 mm) 10,5 kg
VE1406 Bucket-holder 6 spaces (bucket Ø 370 mm) 12,5 kg
VE1407 Bucket-holder 8 spaces (bucket Ø 370 mm) 17 kg
VE1408 Bucket-holder 10 spaces (bucket Ø 370 mm) 21 kg
VE1405
option :
FOLDING BACK
BUCKET-HOLDER
on the calf’s size
30 to 45 cm
depending
option VE2508
25 to 40 cm
+ 10 cm
The metal bucket holder is on option and made for Ø 370
mm buckets.
LAYOUT
HEADLOCK FOR CALF
95
2015
REVERSE
TROUGH
NEW
REVERSE TROUGH
Metal frame with a trough in PEHD that can receive a Ø 285 mm bucket. Easy to reverse for cleaning.
VE2404 Reverse Trough PEHD complete 4 spaces 15 kg
VE2405 Reverse Trough PEHD complete 5 spaces 18 kg
VE2406 Reverse Trough PEHD complete 6 spaces 21 kg NEW
VE2407 Reverse Trough PEHD complete 8 spaces 30 kg
VE2408 Reverse Trough PEHD complete 10 spaces 36 kg
Buckets
Ø 285 mm type Jourdain
96
OCTOBER
CALVES
MODULE Moulded stop
Control pipe
DEPARTURE BAR
Foresee a departure bar with control pipe guide for each module.
MO0320 Departure bar 1,9 kg
CALF EQUIPMENT
every head passage.
MO0310 Supplementary bar with clamps 1,6 kg
Supplementary
bar with clamps
MO0310
70 to 140 mm
120 to
180
}
97
2015
CALF PEN
type Jourdain
Side made in PEHD double skin, shock proof. Slatted floor «UP &
CLEAN» in PEHD, non-slip and raisable. Locked in «up» position, it
permits an easy cleaning without obstacle on the floor.
Opening front with 2 head opening, 2 raisable bucket-holders Ø 285
mm and 1 teat bucket support.
Quick installation with pins in lines or back to back.
Delivered with 2 buckets Ø 285 mm.
Teat buckets in option.
PATENTED
Teat bucket support Mounting with pins Locking pin in a vertical position
VE2532
OPEN FRONT SLATTED FLOOR UP VE2533
Back gate
1,45 m
1,20 m
VE2531
98
OCTOBER
PEN EASY CLEAN FOR CALVES
For calves up to 6 weeks
VE2531 Side composite «EASY CLEAN»
2 pins included. Height : 1,2 m 13 kg
VE2532 Front «EASY CLEAN»
2 buckets Ø 285 mm included 34 kg
VE2535 Slatted floor «UP & CLEAN» 22 kg
VE2533 Back gate of calf pen 16 kg
VE2537 Pin for calf pen side (each) 1 kg
VE2539 Wall fixing for calf pen (the pair) 1 kg
PKVE45 Pack of 4 buckets 12 litres Ø 285 mm 2,2 kg 430 mm
660 mm
PKVE90 Pack of 5 teat buckets 3,6 kg
CALF EQUIPMENT
FEED RACK FOR CALF PEN
500 mm
Made in pipes Ø 10 mm. To be placed on the side (1 for 2 pens).
RA0720 Feed rack for calf pen 11 kg
VE2532 Front
Metal side
VE2530
Wall fixing
VE2539
1,18 m
from th
e
axis/pin wall to 1,15 m the
center-
center p e wall to et
th ck
in
6 m from ut the bu
1,5 (witho rt)
WARNING ! front supp
o
99
2015
100
OCTOBER
June
2015
2015
101
CALF EQUIPMENT
FEED FRONTS
FOR CALF
Ø 49 mm Ø 60 mm
360 mm
Adjustable
360 mm
End detail
80 cm to 90 cm or
+ 10 cm
CALF EQUIPMENT
3 guards 4 adjustments
Ø 34 mm
Ø 42,4 mm at each end ends for calf
760 mm
NEW
A
Ø 42,4 mm
STRAP Ø 76 mm
60 x 5
IMPERATIVE
It is imperative to seal the
30 to 45 cm
panels.
+ 10 cm
CALF SEPARATION
Easy to dismantle - can be opened from both ways
Can be shortened when installing.
With 4 adjusting ends. Height = 800 mm
}
VE2770 Element of 3 m 30 kg
L
NEW MODE
VE2772 Element of 4 m Axis/Axis/Post 44 kg
VE2774 Element of 5 m 57 kg
4 calf ends
Stronger vertical bars
760 mm
110 mm
interior
Ø 34 mm
Ø 34 mm
104
OCTOBER
June
SERVICE GATE
4 BARS
Expandable
CALF EQUIPMENT
Ø 42,4 mm
850 mm
Ø 34 mm
105
2015
2015
R AP EL
ST OD 2D
N E W
M
CALF
ACCESSORIES
3D 1D
WARNING !
ANTI-ROTATION Mind the sealing direction, the round part shows the direction.
4D TR2580 TR1611
Octagonal Post Sleeve cover
Plain to seal Ø 76 mm
mm
165
1,30 m
Second sleeve to limit
TR4176
corrosion Ø 76 mm
Dismantling Dismantling and
sleeve protection sleeve
Ø 76 mm Ø 76 mm with
30 damp-proof flange
0m 60 mm
m and base
TR2590
Octagonal Post Plain
on plate
100 mm
135 mm
VE2790
300 mm
100 mm
Calf end
m
300 m VE2502
Simple bracket
calf
SEALING DETAIL
WITH OCTAGONAL SLEEVE
NEW
MODEL
106
OCTOBER
OCTAGONAL Post Ø 76 mm
VE2502 Simple calf bracket (the pair) 1 ,8 kg
NEW
TR2580 Octagonal Post Plain to seal Ø 76 mm - 1,65 m 8 kg
TR2590 Octagonal Post Plain on plate Ø 76 mm - 1,30 m 10 kg
TR4176 Dismantling sleeve 76 Octagonal red
(for Octagonal Post Ø 76 mm) 0 ,4 kg
TR1611 Sleeve cover for Post Ø 76 mm 1 kg
OCTAGONAL STRAP Ø 76 mm 60 X 5
For Octagonal Post Ø 76 mm NEW
TR2595 Octagonal Strap Ø 76 mm 1 direction 1 ,2 kg
CALF EQUIPMENT
TR2596
TR2597
Octagonal Strap Ø 76 mm 2 directions
Octagonal Strap Ø 76 mm 3 directions
1 ,6
1 ,9
kg
kg
STRAP Ø 76 mm
TR2598 Octagonal Strap Ø 76 mm 4 directions 2 ,2 kg 60 x 5
TR2599 Octagonal Strap Ø 76 mm 2 directions in L 1 ,5 kg
VE2575 Strap Ø 76 mm Simple bracket bolt 1 kg
TR2593 Pair of half Octagonal straps Ø 76 mm plain 0 ,8 kg
CALVES ACCESSORIES o 45 mm
VE2578
Adaptable bolt Autolock with
Gate lach staples 45 mm
FE2118
Strap Ø 76 m To install an Autolock bolt
Simple bracket bolt PN9982 on a front panel EX,
Strap Autolock simple Please order a BAG 134 :
SSV Ø 76 mm 2 staples 60 mm
VE2575
107
2015
FEEDER
Reinforced
2,20 m 0m feet
1,9
4 adjustable calf access bars
920 mm
0m
1,90 m
5 Adjustable calf access bar
INDIVIDUAL
2,80 m
PACKAGE
FEEDER “PACKAGED” 2 m
NO7000 Feeder “Packaged” 2 m with pen 333 kg
NO7010 Feeder “Packaged” big cattle 2 m 251 kg
NO7020 Pen “Packaged” 2,20m alone 82 kg
FEEDERS
Additional feeder for food supplement in steel sheet of 20/10e.
Opening roof.
NO9700 Calf feeder on barrier
(neck protection included) 65 kg
NO9710 Neck protection retail 0,5 kg
400 mm
240 mm
0m
1,2 0m
1,5
47
Double interior
0m
counter-folder
m
anti-cut VE3000
NO9700
109
2015
ROUND BALE
FEED RACK
Reinforced
Feston
Height 1,28 m
Reinforced
3-point hitch
Reinforcement
RA0905 with inside
counter-folder
Ø 49 mm
P.T.F. ROUND BALE
Ø 2,30 m
FEED RACK
OPTION :
Tilting roof for
supplying
Height 1,40 m
Ø 49 mm
Reinforced 3-point
hitch
NO SHARP CORNER
OPENING OPTION
RA0935 Adaptation plate for opening part,
3 pairs for 1 feed rack (the pair) 2,6 kg
ADAPTABLE ROOF
Tubular framework galvanized corrugated iron sheet of 2,25 m, thickness 63/100.
FEEDERS
For road travel,please respect regulations.
111
2015
4 FACES
FEED RACK
Feed rack
for long-horned cattle
Pipe Ø 60 mm
Reinforced by a
top frame
Ø 60 mm
RA0950 RA0951
Adjustable
collar width
Frame Ø 60 mm
RA0952 RA0953 Frame Ø 60 mm
RA0957
4 FACES HORSES
Total opening
on all the versions
112
OCTOBER
FEED RAck «4 FACES» - 2 m x 2 m
- 12 head passages
- Trough thickness 20/10e reinforced with 2 important veins, and inside counter-folds on the 4 sides (anti-cut). Depth
400 mm. Bale Ø 1 m 80.
- 1 side with OPENING SIDE OF TROUGH to facilitate the supplying and the cleaning.
- Roof with metal sheets of 2,25 m - thickness 63/100è.
- «3-points» hitch Ø 102 mm, runner feet for «sliding» on a short distance. Only move the feed rack when
completely empty. For road travel , please respect regulations.
- Delivered in KIT. Packaged.
RA0950 «4 FACES» FESTON 370 kg
RA0951 «4 FACES» PTF 360 kg
RA0952 «4 FACES» SAFETY® 480 kg
RA0953 «4 FACES» DIAGONAL 360 kg
RA0957 «4 FACES» HORSES 480 kg
REtail
RA0992 Side of 3 spaces FESTON L= 1,95 m 31 kg
RA0996 Side of 3 spaces PTF L= 1,95 m 30 kg
RA0998 Side of 3 spaces SAFETY ® III L= 1,95 m 60 kg
FEEDERS
RA7020 Trough reinforcement : 2 pipes Ø 70, L= 1 m 97 (the pair) 20 kg
RA0986
113
2015
BIG BALL
FEED RACK
Feed rack
for long horned cattle
Pipe Ø 60 mm
Reinforced by a
top frame
Ø 60 mm
Pipe
Ø 60 mm
RA0960 RA0961
14 headlocks
SAFETY® III with
automatic return
of the swing arms
Adjustable
collar width
Double
Double veins, reinforcement on runner inside counter-folder
and feet (view from under) anti cut
Total opening
on all the versions
114
OCTOBER
Feed Rack «BIG BALL» - 2 m x 3 m
- 14 head passages, 3 opening sides for 1 rectangular bale or 2 round bales upright.
- Trough thickness 20/10 reinforced with 2 important veins, and interior counter-folds on the 4 sides
(anti-cut). Depth 400 mm.
- 1 side with OPENING SIDE OF TROUGH to facilitate the supplying and the cleaning.
- Transversaly reinforced by a support linked with the two feet runners.
- Roof with metal sheets of 3 m - thickness 63/100è.
-Roof reinforced with a third central arch and 2 gutters to protect the metal sheets.
- «3-points» hitch Ø 102 mm, runner feet for «sliding» on a short distance. Only move the feed rack
when completely empty. For road travel , please respect regulations.
- Delivered in KIT. Packaged.
RA0960 «BIG BALL» FESTON 490 kg
RA0961 «BIG BALL» PTF 475 kg
RA0962 «BIG BALL» SAFETY® 625 kg
RA0967 «BIG BALL» HORSE 630 kg
Volume for 4 Feed Racks Big Ball Packaged
1,60 m x 3 m 10 x 1 m 30 height.
Fully and individually packed with steel sheet roof.
FEEDERS
RA0991 Side of 4 spaces FESTON L= 2,77 m 47 kg
RA0995 Side of 4 spaces PTF L= 2,77 m 41 kg
RA0997 Side of 4 spaces SAFETY® L= 2,77 m 84 kg
RA0947 Frame «BIG-BALL» without the 4 sides 335 kg
RA7028 Trough reinforcement : 2 pipes Ø 70 mm, L= 2,80 m, (the pair) 28 kg
RA0986
115
2015
116
OCTOBER
June
2015
2015
117
HAY AND GRAIN
FEEDERS
FEED RACK
SMALL CATTLE
920 mm
RA0651 Netted element of 920 mm
net 25 x 25 mm 600 mm
720 mm
Hook
Common end
right and left
70 mm
between the bars
Barred element
of 920 mm
1,92 m 450 m
m
240 m
m
NETTED FEEDER
ON BARRIER
700 mm
RA0701
980 mm
98 mm
between the bar Feed rack element
bent bottom MODULAR
RA0805
FEED RACK
118
OCTOBER
June Mars
NETTED FEEDER ON BARRIER (Reserved for small cattle)
Feeders with bent bottom, made of elements of 0 m 92 and 1 m 84 that can be assembled by bolting
them together.
RA0651 Netted feeder on barrier of 0,95 m 31 kg
RA0652 Netted feeder on barrier of 1,87 m 45 kg
RA0653 Netted feeder on barrier of 2,80 m 68 kg
RA0654 Netted feeder on barrier of 3,72 m 84 kg
REtail
RA0610 Barred element of 0,92 m 11 kg
RA0620 Barred element of 1,84 m 22 kg
RA0600 End netted feeder on barrier 6 kg
RA0630 Netted element of 920 mm net 25 x 25 mm 7,5 kg
RA0640 Netted element of 1,84 m net 25 x 25 mm 11 kg
FEEDERS
MODULAR Feed Rack (Reserved for adult animals)
Feed rack with bent bottom ; manufactured in 2 m that can be connected up end to end to ob-
tain a big length wall feed rack with 1 or 2 end pieces and fixation legs or back to back.
RA0805 Feed rack element, bent bottom, L 2 m 28 kg
RA0806 Adaptable end with brackets
(Specify if you need Right or Left) 6,5 kg
RA0807 Back linkage bar with bolts 4,5 kg
RA0808 Set of connecting brackets with fixing leg to fix
the Feed Rack on the wall 1,5 kg
119
2015 2015
2015
CAESARIAN
INSEMINATION
BA5045
Ø 60 mm
BA5040
940 mm
Insemination
Headlock
1,30 m
1,92 m
FRONT EX 5 WITH
INSEMINATION HEADLOCK
Sheet metal gate for 1,01 m (if the straps are welded)
calves suck 1,03 m (if post + straps)
BA5048
CAESARIAN BARRIER
BA5040
INSEMINATION
940 mm
HEADLOCK
NEW
3,41 to 4,60 m (axis / axis post)
940 mm
Gate
for operation
3 IN 1 VET EX PANEL
BA5047
120
OCTOBER
3 IN 1 VET
INSEMINATION HEADLOCK
Strengthened manual headlock with adjustable collar width that allows to block the animal. It can be assembled between
2 posts and support a caesarian barrier to build an insemination block. The end is not adjustable.
BA5040 Insemination headlock only 36 kg
CAESARIAN BARRIER
With 2 adjustement positions in height of 15 cm. With an opening gate at the top for operation, and an opening metal
sheet gate at the bottom for calves suck. Sturdy and functional, no aggressive part, it can be fixed on the insemination
headlock. Supplied with chain.
BA5048 Caesarian Barrier 45 kg
3 IN 1 VET EX 5 PANEL
Separation Barrier for care box. Consists of an insemination headlock, a top part of caesarian barrier and a back part EX5
. From 3.41 to 4.60 m (center/center)
BA5047 3 in 1 Vet EX5 Back 85 kg NEW
headlock and
Insemination
gate
121
2015
E W OCTAGONAL
N
CROSSBAR
490 mm A DJ U S
300 mm TA B L E
2 x BA2094 BA2094
0,89 m
Ø 51 mm
516 mm
0,89 m
122
OCTOBER
ANTI-RETURN FOR
DAIRY CORRIDORS
OCTAGONAL CROSSBAR
Composed of 2 posts on plate , one spacer and 4 fixing plates for Western gate.
BA2105 Octagonal Crossbar 54 kg NEW
headlock and
nsemination
NEW
gate
BA5002
BA2094
ANTI-RETURN FOR
DAIRY CORRIDORS
123
2015
E W THE CATTLE
N
CORRAL
Man pass
Entrance chicane
with “Autolock” system
Back in 1964,
JOURDAIN made it…
50 years later,
it’s coming back !!
Fixed
barrier 3 m
with raisable
Cattle crush bar
PM2400 Super
Option : load bars
Sliding gate
type Jourdain
124
OCTOBER
anticlockwise
Locking every 350 mm
½ CORRAL in 4 parts
very sturdy
350 mm
CO3131 _ 5,01 m
~
Sliding gate CO3110
~
Chicane
CO3100 1/2 CORRAL complete (anticlockwise) 929 kg
CO3110 Chicane complete (anticlockwise) 413 kg
CO3120 Corridor 5 m 525 kg
CO3131 Sliding gate 73 kg
125
2015
E W
N
WARNING !
Corral posts must be sealed in the concrete.
_ 5,60m center-post
_ 5,01 m
~
_ 1,50 m
~
~
_ 1,75 m
~
126
OCTOBER
1/2 Complete Corral clockwise
THE CATTLE
CORRAL
with octagonal post to seal
(Ø 102, length 2,43 m)
Ref : C03103
clockwise
Complete Chicane clockwise
with octagonal post to seal
(Ø 102, length 2,13 m)
Ref : C03113
Corridor 5m
with octagonal post to seal
(Ø 102, length 2,13 m)
Ref : C03120
CORRAL AND
CHUTES
WARNING !
127
2015
E W
N 1,60 m
CO3100
1/2 CORRAL
ANTICLOCKWISE Double
ROTATION POST
WARNING !
Corral posts must be sealed in the concrete.
D
D
Curved barrier
E A for corral
A
A D
2,43 m
I
A
C
128
OCTOBER
THE 1/2 CATTLE CORRAL
The ½ Cattle Corral allows the farmer to work safely when moving the cattle. Very strong
and quiet system.
Please use the Corral posts, not the standard posts with straps.
REtail
Landmark Reference Designation
HCORRAL AND
CHUTES
NB The Corral barriers ref. CO3105 / CO3106 / CO3107 are delivered with 4 eyebolts, you can add the
Autolock system to them by buying a bag ref. SAC182.
The push gate ref.C03108 is made of a specific Autolock front which can be only used in the ½ Corral.
The posts for the ½ Corral are 2m43 long with welded plates in order to fix the spacer bars.
For a better preservation, do not use dismantling sleeve on the corral post.
WARNING !
WARNING ! Due to aggressiveness of grind vegetables and manure, it’s essential to apply
before use the bituminous paint TR0005 on the following material : bottom of
Please follow the assembly post, bottom of barrier and Freestall pin, knee pad, support ... and then perio-
plan dically.
129
2015
E W
N
Chicane
CO3110
2,13 m
WARNING !
P or Q
O
L B J
K
Strap
Autolock
SSV
Fixed B
gate
J 1,25 m
Adjustable
Fixed gate gate
0,88 m
N 1,50/2 m
130
OCTOBER
THE CORRAL CHICANE
The Chicane is used to bring the cattle either to the corridor or to an exit for example a
loading platform. The Chicane also prevents the animals that are already in the corridor
to go backwards.
Only use corral posts for this type of installation.
REtail
Landmark Reference Designation
B CO3105 Adjustable sheet metal barrier 1,50/2 m 70 kg
J CO3114 Fixed gate 0,88 m 31 kg
K CO3115 Fixed gate 1,25 m 43 kg
L CO9911 Corral posts 1D Octagonal 102 mm to seal 2,13m 22 kg
FE2153 Autolock strap SSV (the unit) 3 kg
M CO9912 Corral posts 2D Octagonal 102 mm to seal 2,13 m 23 kg
N CO9913 Corral posts 3D Octagonal 102 mm to seal 2,13 m 24 kg
O CO9914 Corral posts 2DL Octagonal 102 mm to seal 2,13 m 23 kg
P CO9915 Double anti-return post plain to seal 2,13 m anticlockwise 48 kg
Q CO9916 Double anti-return post plain to seal 2,13 m clockwise 48 kg
P Q
CHUTES
_ 1,50 m center/center
~
WARNING !
_ 1,75 m center / center
~
Please follow the assembly
plan.
NB The post for the chicane are 2m13. Do
not use the dismantling sleeve on the corral.
131
2015
E W Fixed Barrier 2m
CORRIDOR
N Raisable bar
5m
CO3120
Fixed Barrier 3m
Raisable bar
Folding
Footboard
2m
Folding
Footboard
3m
R
M R
T
S
V
M
M
M
132
OCTOBER
THE CORRIDOR
The Corridor is used to bring the cattle safely thanks to the footboards and the raisable
bar. It also gives the breeder an easy access to the cattle.
Only use corral posts for this type of installations.
If you want to install this Corridor without the Chicane, please buy 2 additional posts.
REtail
Landmark Reference Designation
_ 5,01 m
~
78 cm
81 cm
CORRAL AND
CHUTES
133
2015
Indicator
Linking cable reinforced twice PM500
4 m Ø 12 mm anti-rodents
CRUSH
SET OF LOAD BARS
WITH pm500 INDICATOR
1,23
m
1,81 m
Opening 1,69 m
handle on
2,01 m
25 cm 91 cm
RIGHT sliding GATE
CO2683 CO3131
cm 60 cm
85
GATE PM83
Front view
Cattle sorting
Gate
CO3133
1,50 m
SAFETY SHUTTER
CO3135
134
OCTOBER
NON ADJUSTABLE CATTLE crush
Complete, practical and functional, ideal for all care : vaccination, insemination, dehorning, caesarian, shearing,
fastening, blood test, etc. with metal sides, lateral opening doors, «3-point linkage» - Winch with straps for
ventral support, winch to lift hind legs and gutter for front legs. Volume 2,40 x 0,82 x 1,7 m.
Headlock door with central tightening and automatic opening by levers, double swinging door basket; two
lateral gates, rack anti-detachment, back double swinging door. Complete nonskid diamond plate floor.
CRUSH DOOR
CRUSH DOORS type PM83
Central closing headlock gate, double frame. Double swinging holding basket, opening by automatic
level. The lever can be put on the right or the left upon request.
Inside dimensions 1,70 x 0,82 m.
CO2683 Galvanized crush door PM83 lever on the right 243 kg
Front view (model shown above)
CO2685 Galvanized crush door PM83 lever on the left 243 kg
CORRAL AND
SLIDING GATE CHUTES
The door slides easily on rail to stop animals quickly and work in security at the back of the crush. It has to
be fixed on the concrete floor (8 points) and on posts.
SAFETY SHUTTER
This galvanised panel can be placed between the cattle crush and the sorting gate. With its ground locking
bar, it can also be placed after a silde gate.
CO3135 Safety Shutter (the unit) 21 kg
135
2015
Example of MOUNTING
with WAITING PARK
Step 1 Loading
platform
* Corridor * *
*
* Secured work area
* Holding area
136
OCTOBER
Step 2 Loading
platform
* Corridor * *
*
* Secured work area
* Holding area
Push the animals to let them enter the corral trough the chicane to
the corridor or to the loading platform.
CORRAL AND
CHUTES
Move the animals to the holding area, then open the push gate to let
them enter in the 1/2 Corral.
137
2015
Example cattle corral
with SORTING GATE AND HOLDING PARK
*
*
*
138
OCTOBER
Safety shutter
Corridor
Sliding gate
Cattle crush
The Sorting Gate allows the breeder to sort the livestock with a safe
access. On the example above, the animals can go directly to the
Corridor by passing through the Chicane. The Sorting gate is used to
stop the animals in order to take them either to the holding area or
the Corridor. This Corridor can take the animals to a Cattle Crush. The
Sorting gate must be used with a Safety shutter, mounted on a post
which allows the movement of the Sorting gate and the orientation of
the cattle to the Corridor.
Mounting advice
Please place the Cattle Crush
80 cm from the Slide gate
to have an easy access from
behind the animal.
CORRAL AND
CHUTES
Sliding gate
Safety shutter
139
2015
PANEL
Vertical
2,25 m
reinforcement
42 x 21 mm PA2200
1,57 m
42 x 21 mm
50 x 25 mm
Runner feet
HOLDING PANEL
2,40 m 1,20 m
Ø 51 mm
760 to PA0060
2,10 m
1230 mm
Ø 42 mm PKPA60
PA9950
Strap 50 mm
Transpanel
For storage and transport of panels. Capacity of 16 panels and 1 adaptable passage. Transport by 3-point
linkage. Delivered with a strap.
PA0060 Transpanel only 131 kg
ParK panel 3 x 3
CHUTES
Light - easy to move - suitable for inside and outside - Quick installation and removal - rigid holding - as-
sembly by straps
PA3300 Park panel 3 x 3
Composed of 3 panels of 3 m + front 168 kg
PA3323 Extension for park panel
Composed of 2 panels of 3 m + front 130 kg
PA1800 Panel 1,80 m (short) 27 kg
PA3318 Front of park panel of 3 m
Composed of 1 panel of 1,80 m + 1 passage 60 kg
PA9950 Pair of straps for corner assembly Ø 50 mm 0,85 kg
PA9970 Pair of straps for triple assembly Ø 70 mm 1,70 kg
SAC330 Bag for Park Panel 4,20 kg
SAC332 Bag for Park Panel extension 3,50 kg
141
2015
GOAT
HEADLOCK
GOAT HEADLOCK
Reinforcement
swing arms
CC3980
Control handle Quiet locking pawl Guard Linkage end to end
on the top part
Ø 42,4 mm
200 mm
690 mm
CC3987
Ø 27 mm 313 mm
CC3982 Ø 42,4 mm
8 spaces / 2,50 m
Double
counter-folder
CC3986
62 cm anti-cut inside
with inclination brackets 1,50 m
36 cm
Post Ø 42,4 mm
5 cm
CC3994 cm
+ 10
Intermediate
CC3990 trough support 10 cm
X=
X
CC3992
with end
LAYOUT
142 GOAT HEADLOCK
OCTOBER
GOAT HEADLOCK
The elements of 8 spaces on 2,50 m must be linked to each other end to end. Quiet locking
pawl. We recommend to put a control handle every 6 elements (48 spaces). Support posts can
receive a galvanized metal big capacity trough with anti throwing-out edge.
CC3982 Headlock 8 spaces on 2,50 m with control pipe 54 kg
CC3987 End section bar 1,2 kg
CC3986 Post Ø 42,4 mm, Length 1,50 m
with inclination bracket for sheep and goats 5,4 kg
CC3980 Control handle (1 for 6 elements) 0,7 kg
Section bar
CC3988
160
485 mm
mm
GOAT + SHEEP
EQUIPMENT
70
mm
250 mm
Ø 27 mm Ø 42,4 mm Post with
inclination brackets
CC3986
10 spaces / 2,50 m
143
2015
SHEEP
HEADLOCK
SHEEP HEADLOCK
CC3980
Control handle MAXI
Control pipe
MINI
485 mm
Post Post
support Adjustable collars width by a 2nd sliding frame support
7 spaces on 2,50 m CC3986
CC3986
Post support with
incline bracket
FEEDING PELLET
METAL TROUGH
1,50 m
OV0250 330
mm
Feeding pellet trough
Element of 2,50 m
150 mm
OV0252
Trough support with end
144
OCTOBER
FEEDING PELLET
TROUGH
SHEEP HEADLOCK
Made in pipes Ø 42,4 mm and Ø 27 mm, the headlocks 7 spaces on 2 m 50 are linked end to end, as their control pipes,
to obtain the desired length.
Composed of two frames :
- The first one has the swing arms reinforced by a wear- out ring at the articulation, with silent locking pawl type
«Safety» and head anti-passage at top part.
- The second frame (green) can slide and allows instantaneously and without any key to adjust collectively the collars and the
free-service position.
Vertical support posts in pipe Ø 42 mm allows to adjust the height of the headlock and to receive the supports for a trough.
OV0750 Headlock 7 spaces on 2,50 m with control pipe
and the second sliding frame 55 kg
CC3988 Starting bar 1,5 kg
CC3986 Post Ø 42 mm, Length 1,50 m with inclination bracket
for goats and sheep 5,4 kg
OV9960 Post on plate Ø 42,4 mm, Length 1,50 m with incline
bracket for goats and sheeps 8,3 kg
CC3980 Control handle 0,7 kg
OV9910 Control handle for the sliding frame
for 4 elements maximum 2 kg
35 cm
GOAT + SHEEP
OV9960
EQUIPMENT
cm
+ 15
70 c 40 or 90 cm
m 10 cm
30 cm
25 to
LAYOUT
SHEEP HEADLOCK
145
2015
LIGHT
SHEEP
HURDLE
3m
135 mm 35 x 6 mm
Ø 20 mm
135 mm
1,10 m
135 mm
740 mm
96 mm
96 mm
96 mm
96 mm
Also available
with lamb passage 300 mm
OV3605
2m 2m 1m 1m
Ø 27 mm
Ø 20 mm
Ø 27 mm
810 mm
1,10 m
Ø 20 mm
Ø 27 mm
LIGHT ADAPTABLE
LIGHT HURDLE LIGHT HURDLE HURDLE PASSAGE
for drinker of 2 m of 1 m
OV3660 OV3620 OV3610 OV3650
146
OCTOBER
3M SHEEP HURDLE
OV3605 Galvanized simple hurdle 38 kg
OV3606 Galvanized Hurdle with adjustable
rollers lamb pass 42 kg
1,44 m
225 mm
810 mm
1,10 m
OV3670
GOAT + SHEEP
EQUIPMENT
147
2015
148
OCTOBER
June
2015
2015
149
GOAT + SHEEP
EQUIPMENT
GOATS
SEPARATION
goats separation
Easy to dismantle and can be opened from both ways. Possibility to be shortened
when installing. With 4 calf ends.
L
NEW MODE
CC3970 Goats separation of 3 m 43 kg
CC3972 Goats separation of 4 m 58 kg
CC3974 Goats separation of 5 m 76 kg
with 4 ends
Ø 42,4 mm
1,08 m
75 mm
interior
Ø 27 mm
150
OCTOBER
SHEEP
FREE-SERVICE
SHEEP FREE-SERVICE
2m 50 trough and neck bars adjustable in height. Complete release on the corridor side allowing to supply the trough
mechanically. Special trapezoidal trough, big capacity with anti-throwing out edges, thickness 15/10 e galvanized.
OV3501 Departure element with end pieces 78 kg
OV3502 Extension element 61 kg
REtail
OV9917
Intermediate chair with cross clamp 13 kg
OV9918
Trough 38 kg
OV9919
Neck bar Ø 34 mm 5 kg
OV9920
End piece (with cross clamps) 15 kg
OV9950
Cross clamp 34/34 with bolts 0,6 kg
Exemple :
For 1 section of 10 m
1 x OV3501 Departure element
3 x OV3502 Extension element
OV9919
Neck Bar Ø 34 mm
0m
2,5
Cross clamp 34/34
OV9920
Intermediate chair
OV9917
GOAT + SHEEP
EQUIPMENT
Trough
End piece OV9918
151
2015
FEED RACK
SMALL CATTLE
1,70 m
RA1010
920 mm
Roof in option 320 mm
190 mm
Ø 27 mm
750 mm
Ø 34 mm
530 mm
CIRCULAR SHEEP
1,22 m
FEED RACK
RA0170
0m
2,6
RA1008
RA1018
152
OCTOBER
June
DoubLE FEED RACK
Double feed rack with trough for small cattle (calves, sheep, goats). Galvanized frame and trough.
RA1008 Galvanized double feed rack - New model 90 kg
RA1010 Roof - Length : 3 m (option) 44 kg
REtail
RA9921 Bared railing element 22 kg
RA9922 End 12 kg
RA9926 Trough New Model 23 kg
RA9923 Trough Old Model 25 kg
WARNING !
Because of the dimension between bars, this feed rack is not designed for calves.
GOAT + SHEEP
EQUIPMENT
153
2015
2015
TELESCOPIC
BARRIER
BA5053
GATE EX3 FRONT AUTOLOCK EX3
60 mm Ø 60 mm Ø 49 mm
480 mm
1,15 m
210 mm
Eyebolt Ø 22 mm
Eyebolt Ø 22 mm
+ 3 bolts
FE2116
Anti-passage
Cross steel ring
Closed
Lock position
locking
60 mm 480 mm Ø 60 mm Ø 49 mm
940 mm
1,15 m
210 mm
60 mm
Eyebolt Ø 22 mm Eyebolt
Ø 22 mm
154
OCTOBER
More products for HORSES
in our equine CATALOGUE
www.jourdain-group.com
TELESCOPIC 3 BARS
Manufactured with pipes Ø 60 mm. Telescopic pipe Ø 49 mm.
Spacers Ø 49 mm adjusted for welding, 3 tightening grub screws,
eyebolt Ø 22 mm and 3 nuts on cross steel ring.
Only for horses.
FRONT PANEL EX 3
BA9950 Front panel EX3 20 kg
These barriers are made
on request. Please foresee
BACK EX 3 a 6 weeks delay from order
placement.
BA9951 Back EX3 2/3 m 29 kg
BA9952 Back EX3 3/4 m 41 kg
BA9953 Back EX3 4/5 m 53 kg
BA9954 Back EX3 5/6 m 67 kg
Stainless
steel
spring
Round bolt
Ø 20 mm FE2153
3 BAR GATES
155
2015
GALVANIZING
PROCESS & STORAGE
VERY IMPORTANT
HOT DIP GALVANIZING
AND STORAGE INFORMATION
All our material is hot dip galvanized under the ISO standard 1461.
The hot dip galvanizing adds a zinc based coating which protects the steel from corrosion. The equipments are dipped in
a zinc bath 450°, which protects them from corrosion in both inside and outside environments.
The 1461 standard «Hot dip galvanized coatings on fabricated iron and steel products» defines the properties , the mini-
mum thickness and the coating feature as well as the testing methods that allows to control the zinc thickness or zinc, the
appearance and adhesion, and the compliance criteria.
The zinc’s thickness can vary depending on the material’s conception, the chemical composition of the steel, its thickness
and other elements; however the zinc thickness is always within the 1461 standard.
When exposed to the atmosphere, zinc reacts with ambient elements: humidity, oxygen, carbonic gas... to form a patina,
which means a decrease of the metallic luster of the surface.
However, in the presence of stagnate water, the coating can be degraded and some whitish stains can appear. These stains
do not damage the material or its protection.
Our galvanization factory partner is certified under ISO 9002.
Our material must be stored only on non-tannic wood, it cannot be stored directly on the ground. You must let some space
between the ground and the material in order to prevent stagnate water.
A long contact with aggressive agents like clay, tuft, fertilizers and pesticides may lead to a deterioration of the zinc coating.
WARNING !
Due to aggressiveness of grind vegetables and manure, it’s essential to apply before use the bituminous paint
TR0005 on the following material : bottom of post, bottom of back and Freestall pin, knee pad, support ... and
then periodically. This layer is insoluble, adhesive and give an additional protection to the coating.
156
OCTOBER
June
IMPORTANT
INFORMATIONS
For road transport with products like : feed rack, feeders, transpanel... please respect the regulation in force. JOURDAIN
cannot be held responsible in event of an accident.
For a good use of our material, please check regulary the screws and oil the moving elements.
In spite of all the care that we bring to our products during their conception, taking into account that safety for the users
and comfort for the animal are our main objective, Jourdain cannot be held responsible for any incident with an animal.
We, at Jourdain, truly think that the knowledge and the daily care of the livestock by the breeder is the safest solution to
prevent accidents.
BOLTS AND NUTS
157
2015
2015
NOTES
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
158
OCTOBER
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
159
2015
172