Professional Documents
Culture Documents
Valve Sealant
JM-GS-Sealant X
JM–GS-Sealant X is a synthetic base oil and an effective film of sealant with microscopic PTFE
powder and Teflon Fillers. JM–GS-Sealant X will seal scratches and stop the valve passing. It’s
specially designed for seat sealing against major valve leakages.
Applications
Recommended for use in Gate and Ball valves.
Suitable for general hydrocarbon. It is excellent water resistant, inhibited for H2S and CO2 applications.
Properties
Part N o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JM-100-GS
Color ........................................................................................................................................... Green
Texture… ..................................................................................................................................... Tacky
NLGI…………………………………………………………………………………………….. 4
Pressure ........................................................................................................................................ 10K psi
Cone Penetration, mm/10 ASTM D217 ....................................................................................... 175-205
Drop Point, °C ASTM D2265 ....................................................................................................... None
Filler ............................................................................................................................................. TEFLON
Temperature Range ...................................................................................................................... -20°C to 150°C
-4°F to 302°F
Packaging
18 Kg / Pail
Stick
Note:
Higher Grades from this type of Sealant are available for severe leakage.
Other packages are available upon for your request. For more details, please contact the manufacturer.
Made In KSA
JM-GS-Sealant XX
JM–GS-Sealant XX is a synthetic base oil and an effective film of sealant with microscopic PTFE
powder and Teflon Fillers. JM–GS-Sealant XX will seal scratches and stop the valve passing. It’s
specially designed for seat sealing against major valve leakages.
Applications
Recommended for use in Gate and Ball valves.
Suitable for general hydrocarbon. It is excellent water resistant, inhibited for H2S and CO2 applications.
Properties
Part N o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JM-100-GS
Color ........................................................................................................................................... Green
Texture… ..................................................................................................................................... Tacky
NLGI…………………………………………………………………………………………….. 5
Pressure ........................................................................................................................................ 10K psi
Cone Penetration, mm/10 ASTM D217 ....................................................................................... 130-160
Drop Point, °C ASTM D2265 ....................................................................................................... None
Filler ............................................................................................................................................. TEFLON
Temperature Range ...................................................................................................................... -20°C to 150°C
-4°F to 302°F
Packaging
18 Kg / Pail
Stick
Note:
Higher Grades from this type of Sealant are available for severe leakage.
Other packages are available upon for your request. For more details, please contact the manufacturer.
Made In KSA
1. PRODUCT IDENTIFICATION
2. MANUFACTURER INFORMATION
3. INGREDIENTS INFORMATION
Additives Proprietary 0 – 06
Inhalation Move injured person to fresh air, if necessary to prevent their exposure to
further harm. Call medical emergency if symptoms is severe.
Eye Contact Flush your eye with water for at least 15 minutes and don’t rub the eye. If
eye irritation is severe call medical emergency immediate.
Skin Contact Protect yourself (put on gloves or apron if possible). Wash with water for at
least 15 minutes and soap, don’t use strong stream water.
Final suggestion to call medical emergency.
Ingestion Immediately to wash the mouth and read the container of the chemicals to
help medical emergency.
Most important symptoms Cause eye irritation. Symptoms may include, stinging,
a burning sensation, redness, pain, swelling of the eyelids,
blurry vision.
Immediate Medical Treatment Treatment differs according to the injuries. First pain relieving medicine,
antibiotics to reduce the risk of infection,
if more complication hospital admission necessary.
Fire Fighting Equipment Foam (flammable Liquid fire), Water (Wood and paper fires) not electrical,
CO2 (Electrical Fires), Dry chemical (flammable liquids and electrical fires),
Improper Fire Fighting Don’t use water fire extinguisher and it will spread the fire
Specific hazards arising from Do not inhale chemical directly, under fire conditions
the chemical
Production against fire Do not enter fire area without proper protective equipment, including
respiratory protection.
Fire Fighting Measures Self-contained breathing apparatus and protective clothing should be worn
in fighting large fires involving chemicals. Determine the need to evacuate
or isolate the area according to your local emergency plan.
Personal precautions Remove ignition sources. Avoid all unnecessary exposure. Equip cleanup
crew with proper protection.
After spillage and cleaning up Spill area may be slippery. Use suitable disposal containers.
Clean up any spills as soon as possible, using an absorbent material to
collect it.
Precautions for safe handling Wash hands and other exposed areas with mild soap and water before eat,
drink or smoke and when leaving work.
Avoid contact with skin and eyes.
storage and incompatibilities Keep away from sources of ignition. Keep only in the original container in a
cool, well ventilated place. Keep at temperature not exceeding. No
incompatible materials.
Industrial hygiene When using, do not eat, drink or smoke. Provide adequate ventilation to
minimize dust and/or vapor concentrations
Occupational Exposure Limits The product does not contain any relevant quantities of materials with
critical values that have to be monitored at the workplace
Color Brown
Odor Odorless
pH Not available
Chemical stability Avoid extreme heat and high energy sources of ignition.
Waste-disposal procedures Dispose of waste and residues in accordance with local authority
requirements.
Do not flush to surface water or sanitary sewer system
General information The product is not covered by international regulations on the transport of
dangerous goods (IMDG, IATA, ADR/RID).
Contents of this SDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200
These data are offered in good faith as typical values and not as product specifications. No warranty, either
expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are
believed to be generally applicable. However, each user should review these recommendations in the specific
context of the intended use and determine whether they are appropriate.