Department of Electrical Engineering
UNIVERSITY INSTITUTE OF TECHNOLOGY-RGPY, Bhopal
3 Mid Semester Examination [bate | 06/12/2023
Brogram | Brechin Electrical & Electronics Engineering
Semester | 5* Session = 2022-2003 [Max Marks30
eta ec ofc este ne a Subject Code: £¥-511_| Duration: thr
Note | Attempt any 3 questions. All questions carry equal marks.
QNo ‘Question co
Number
Qi_| Elaborate about strain gauge, gauge factor and its various types in detail? €O3
Q2 | Explain the working of Capacitive Transducers? C03
An inductance of 0.22H and 20 ohm resistance is measured by comparison with a fixed | CO2
standard inductance of 0.1H and 40 ohms resistance. The unknown inductance is in arm ab
and the standard inductance is in arm be, a resistance of 750 ohms is connected in arms ed
and a resistance whose amount is not know is in arm da. Determine the resistance of arm
da and shown any necessary and practical addition required to achieve both resistive and
inductive balance.
4 | Explain (@) Dual slope type DVM and ()5) Successive approximation type DVM. Coa
5 | A 41/> digital voltmeter is used for voltage measurements. (i) Find its resolution. Gi) | CO4
How would 12.98V be displayed on a 10V range? (iii) How would 0.6973 be displayed on
1V and 10V ranges?
Compare Analog and Digital instruments.