Professional Documents
Culture Documents
PRODUCTS
FINTEX-TETRAKEM OY
Mäkirinteentie 13, 36220 Kangasala • FINLAND
Tel. +358 20 785 1210 • www.fintex.fi
REFERENCES
Shipyards Cruisers
Chantiers de I’Atlantique, France Harmony of the Seas
Helsinki Shipyard, Finland Oasis of the Seas
Meyer Werft, Papenburg, Germany Allure of Seas
Meyer Turku, Finland Symphony of the Seas
Mitsubishi Koyagi, Nagasaki, Japan M/S Freedom of the Seas
MV Werften, Wismar, Germany M/S Liberty of the Seas
MV Werften, Rostock, Germany M/S Independence of the Seas
MV Werften, Stralsund, Germany M/S AIDAprima
Rauma Marine Constructions, Finland M/S AIDAperla
Piikkio Works Oy, Finland Mein Schiff 3-6
Costa Toscana
Costa Smeralda
Carnival Mardi Gras
MSC Meraviglia
MSC Bellissima
MSC Grandiosa
Celebrity Edge
Carnival Celebration
Mardi Gras
Costa Toscana
Scenic Eclipse
Scenic Eclipse II
2 3
FT Card DATA SHEET FT Card DATA SHEET
Aluminium anodized
Construction boards
Aluminium anodized
Construction boards
Primer coated steel
Fiberglass mesh
Galvanized steel
Fiberglass mesh
Steel aluminium
Steel aluminium
Stainless steel
Stainless steel
Ceramic tiles
Ceramic tiles
Fibre boards
Fibre boards
Materials Materials
Aluminium
Fiberglass
Aluminium
Fiberglass
Concrete
Concrete
PS, EPS
Plywood
PS, EPS
Plywood
Textiles
Textiles
Glass
Brass
Glass
Brass
Teak
PVC
ABS
Teak
PVC
ABS
Stainless steel Stainless steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 3 3 3 3 3 3
Galvanized steel 3 3 3 3 1 1 1 3 0 3 3 2 3 3 3 3 3 3 Galvanized steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 3 3 3 3 3 3
Primer coated steel 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0 Primer coated steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0
Aluminium 3 3 2 2 3 3 3 0 0 0 Aluminium 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0
Aluminium anodized 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0 Aluminium anodized 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0
Steel aluminium 3 3 3 3 1 1 1 3 3 3 3 2 0 0 0 0 0 0 Steel aluminium 3 3 3 3 3 3 1 1 1 3 3 3 3 2 0 0 0 0 0 0
PVC 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 PVC 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1
ABS 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 ABS 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1
Fiberglass 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 Fiberglass 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1
Ceramic tiles 3 3 3 3 1 1 1 3 0 3 1 2 0 0 0 0 0 0 Ceramic tiles 3 3 3 3 3 3 1 1 1 3 0 3 1 2 0 0 0 0 0 0
Concrete 0 0 3 0 3 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Concrete 0 0 0 0 0 3 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Glass 3 3 3 3 3 1 1 1 3 3 3 3 2 3 3 3 3 3 3 Glass 3 3 3 3 3 3 1 1 1 3 3 3 3 2 3 3 3 3 3 3
Teak 3 3 2 3 3 1 1 1 1 3 3 3 2 3 3 3 3 3 3 Teak 3 3 3 3 3 3 1 1 1 1 3 3 3 2 3 3 3 3 3 3
Plywood 2 2 2 2 2 2 2 2 2 2 2 2 0 2 2 2 2 2 2 Plywood 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Fibre boards 3 0 3 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Fibre boards 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Construction boards 3 0 3 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Construction boards 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Brass 3 0 3 0 0 1 1 1 0 0 3 3 2 0 0 3 0 0 0 Brass 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
PS, EPS 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 PS, EPS 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Fiberglass mesh 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Fiberglass mesh 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Textiles 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Textiles 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
This table, Table 1, tells suitability of Tetrakem Fire Secure 1027 and 1050 when using them as adhesive.
This table, Table 2, tells suitability of Tetrakem Fire Secure 1027 and 1050 when using them as sealant.
In Table 2 are suitabilities when using Tetrakem Fire Secure 1027 and 1050 as sealant.
In Table 1 there are suitabilities of various materials when using Tetrakem Fire Secure 1027 and 1050
When glueing non-porous materials the evaporating water must be let out from between materials
as adhesive.
during drying period . In these cases adhesive must be combed open with a suitable spatula e.g. 8-10mm.
6 7
CERTIFICATE NO EUFI29-21002793-MED 1 (2) CERTIFICATE NO EUFI29-21002793-MED 2 (2)
Product description Fire Secure Mastic Adhesive 1027. One component acrylic-based sealant and
mounting adhesive. Colour Off-White. Density of the product 1450 kg/m3.
Product can be spread with ≤ 4 mm notched trowel, not more than 60 mm wide
stripe with at least 50 mm wide area of non-combustible material on both sides
or product can be used on as a strip not more than 30 mm wide solid stripe and
on both sides at least 50 mm wide area on both sides of the glue stripe.
NOTIFIED BODY 0809
Approved for use as adhesive with low flame spread characteristics.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Technical document FT Card, Fire Secure Mastic Adhesive 1027 data sheet, 28.8.2018.
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Test reports EUFI29-21001995-T2, (May 18, 2021), Eurofins Expert Services Oy.
Fire Secure Mastic Adhesive 1027 EUFI29-21001995-T3, (May 18, 2021), Eurofins Expert Services Oy.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5 Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on Annex 1 Part 2 and Part 5).
materials with low flame-spread characteristics and not Notes This certificate replaces the previous EC Type-Examination Certificates (B-
module) VTT-C-11651-15-16.
producing excessive quantities of smoke and toxic products
or not giving rise to toxic hazards at elevated temperatures This certificate will not be valid if the manufacturer makes any changes or
modifications to the approved equipment, which have not been notified to, and
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to agreed with the notified body named on this certificate.
surface materials with low flame-spread characteristics. Should the specified regulations or standards be amended during the validity of
this certificate, the product is to be reapproved prior to it being placed on board
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type vessels to which the amended regulations or standards apply.
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the
The Mark of Conformity may only be affixed to the above type approved
"Agreement between the European Community and the United States of America on Mutual Recognition of
equipment and a Manufacturer’s Declaration of Conformity issued when the
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
production-control phase module (D, E or F) of Annex B of the Directive is fully
No.1/2018 signed February 18th 2019.
complied with and controlled by a written inspection agreement with a notified
body.
Manufacturer of the product is
END OF CERTIFICATE
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
8 9
CERTIFICATE NO EUFI29-21002794-MED 1 (2) CERTIFICATE NO EUFI29-21002794-MED 2 (2)
Product description Fire Secure Mastic 1050. One component acrylic-based sealant and mounting
adhesive. Colour Off-White. Density of the product 1450 kg/m3.
Product can be spread with ≤ 4 mm notched trowel, not more than 60 mm wide
stripe with at least 50 mm wide area of non-combustible material on both sides
or product can be used on as a strip not more than 30 mm wide solid stripe and
on both sides at least 50 mm wide area on both sides of the glue stripe.
NOTIFIED BODY 0809
Approved for use as adhesive with low flame spread characteristics.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Technical document FT Card, Fire Secure Mastic 1050 data sheet, 28.8.2021.
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Test reports EUFI29-21001995-T2, (May 18, 2021), Eurofins Expert Services Oy.
Fire Secure Mastic 1050 EUFI29-21001995-T3, (May 18, 2021), Eurofins Expert Services Oy.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5 Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on Annex 1 Part 2 and Part 5).
materials with low flame-spread characteristics and not Notes This certificate replaces the previous EC Type-Examination Certificates (B-
module) VTT-C-11651-15-16.
producing excessive quantities of smoke and toxic products
or not giving rise to toxic hazards at elevated temperatures This certificate will not be valid if the manufacturer makes any changes or
modifications to the approved equipment, which have not been notified to, and
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to agreed with the notified body named on this certificate.
surface materials with low flame-spread characteristics. Should the specified regulations or standards be amended during the validity of
this certificate, the product is to be reapproved prior to it being placed on board
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type vessels to which the amended regulations or standards apply.
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the
The Mark of Conformity may only be affixed to the above type approved
"Agreement between the European Community and the United States of America on Mutual Recognition of
equipment and a Manufacturer’s Declaration of Conformity issued when the
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
production-control phase module (D, E or F) of Annex B of the Directive is fully
No.1/2018 signed February 18th 2019.
complied with and controlled by a written inspection agreement with a notified
body.
Manufacturer of the product is
END OF CERTIFICATE
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
10 11
Table 2
FT Card DATA SHEET
Suitability of various materials when using
Tetrakem 1050 and 1027 as sealant and recommended pretreatment.
Aluminium anodized
Construction boards
Primer coated steel
Product A solvent-borne, toluene free, almost n-hexane free,
Galvanized steel
Fiberglass mesh
Steel aluminium
special contact adhesive for shipyards, maritime industrial and professional use.
Stainless steel
Ceramic tiles
Fibre boards
Phase Slightly yellowish liquid synthetic rubber solution.
Materials
Aluminium
Fiberglass
Suitability Floor coverings, insulation fixing etc. in maritime industry and car body construction.
Concrete
PS, EPS
Plywood
Textiles
Most suitable for joining rubber, cell rubber, leather, gaskets, floor- and wall coverings,
Glass
Brass
moldings, metal, and different linings and insulations.
Teak
PVC
ABS
Technical data
Stainless steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 3 3 3 3 3 3
Galvanized steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 3 3 3 3 3 3 Application Temperature + 10°C -- + 40°C.
Primer coated steel 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0 Density 0,83 g/ml.
Aluminium 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0 Curing time 5-15 minutes, depending on circumstances.
Aluminium anodized 3 3 3 3 3 3 1 1 1 3 0 3 3 2 0 0 0 0 0 0 Coverage approx. 4 m2/l.
Steel aluminium 3 3 3 3 3 3 1 1 1 3 3 3 3 2 0 0 0 0 0 0 Open time 10-40 minutes.
PVC 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 Temperature resistance - 40°C - +75°C. Heat resistance of dry adhesive seam approx. +75°C without hardener.
ABS 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 With 3-10% added hardener AD1600 heat resistance of dry seam approx. 80-90°C.
Ceramic tiles 3 3 3 3 3 3 1 1 1 3 0 3 1 2 0 0 0 0 0 0 Storage stability 24 months after date of manufacture, stored in dry place. +5°C - + 25°C.
Long storage may effect on brushability.
Concrete 0 0 0 0 0 3 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Thinner 1040 Neofix thinner
Glass 3 3 3 3 3 3 1 1 1 3 3 3 3 2 3 3 3 3 3 3
Colour Yellowish
Teak 3 3 3 3 3 3 1 1 1 1 3 3 3 2 3 3 3 3 3 3
Tools Brush, roller or spray gun.
Plywood 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Packaging Steel cans of 1, 3, 10, 20, 200 and 1000L
Fibre boards 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Certificate This product has been tested in accordance with fire safety directive
Construction boards 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 for the shipbuilding industry using IMO Resolution MSC. 307(88)
Brass 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 methods and meets the requirements of IMO 2010 FTPC Part2 and Part 5.
Certificate EUFI29-19005465-MED. NOTIFIED BODY 0809
PS, EPS 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Fiberglass mesh 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0
Textiles 3 3 0 0 0 0 1 1 1 0 0 3 3 2 0 0 0 0 0 0 Handling instructions
Suitability Pretreatment Conditions Surfaces have to be clean and dry, free from grease and dust. Surfaces can be coarsed. Apply adhesive with a brush
or a roller thin and smooth layer to both surfaces. The adhesive can be diluted with 1040 Neofix thinner 5 to 20 %
when using a spray gun system. Apply glue on both surfaces and let dry from 15 to 40 minutes, depending on
conditions. Press surfaces firmly together, check carefully that there are no air bubbles between the surfaces.
Excellent No pretreatment 0 Over-dried surfaces can be reactivated with heat or with 1040 Neofix thinner. When heat activated, press surfaces
Fine grinding 1 together when those are still warm. The Neofix adhesive will hold immediately, but the full strength will develop in
about two days. When thoroughly dried the adhesive is freeze resistant.
Coarse grinding 2
Cleaning 1040 Neofix thinner or acetone
Good Wiping grease off 3
Cleaning of tools 1040 Neofix thinner or acetone
Environment Adhesive waste must be treated as hazardous waste. Empty cans can be recycled or delivered to waste station.
Warnings Contains ethyl acetate and hydrocarbon solvents.
Satisfying
Safety Safety data sheet must be read before use. These are available at Fintex websites.
Fire resistant Highly flammable
This table, Table 2, tells suitability of Tetrakem Fire Secure 1027 and 1050 when using them as sealant. Transport ADR transportation class UN 1133: Adhesives containing flammable liquid 3, II. Store in properly closed cans
In Table 1 there are suitabilities of various materials when using Tetrakem Fire Secure 1027 and 1050 in a cool and well ventilated storage. The regulations for storing and transportation of flammable liquids will apply.
as adhesive.
12 13
CERTIFICATE NO EUFI29-19005465-MED 1 (2) CERTIFICATE NO EUFI29-19005465-MED 2 (2)
Regulation Item MED /3.18e, surface materials with low flame-spread characteristics, adhesives
used in the construction of ‘A’, ‘B’ and ‘C’ divisions.
Product description A solvent borne contact adhesive for industrial use, density 0,83 g/ml.
materials with low flame-spread characteristics and not Should the specified regulations or standards be amended during the validity of
this certificate, the product is to be reapproved prior to it being placed on board
producing excessive quantities of smoke and toxic products vessels to which the amended regulations or standards apply.
or not giving rise to toxic hazards at elevated temperatures
The Mark of Conformity may only be affixed to the above type approved
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to equipment and a Manufacturer’s Declaration of Conformity issued when the
production-control phase module (D, E or F) of Annex B of the Directive is fully
complied with and controlled by a written inspection agreement with a notified
surface materials with low flame-spread characteristics. body.
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type END OF CERTIFICATE
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the
"Agreement between the European Community and the United States of America on Mutual Recognition of
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
No.1/2018 signed February 18th 2019.
Fintex-Tetrakem Oy
The Certificate is valid until November 3, 2024 unless suspended, expired or withdrawn, provided the condi-
tions in this certificate are complied with and the equipment remains satisfactory in service.
148 9 15
DATA SHEET DATA SHEET
FT-card FT-card
Cleaning of tools With water and soap.
Packages 15 liters.
Certificate EUFI29-21002795-MED
Flammability Non-flammable.
Technical information Transportation Warm transportation, keep from freezing.
Density 1,02g/ml
Dry contents Approx. 9 p-%
Storage 12 months in original packages in a dry and cool place. Does not stand storage once opened.
2 2
Controversy 3-5 m /l equal to 200 -350 g/m .
Maximum weight of materials
2
Approx. 500 g/m . When working with heavy materials a trial attachment is recommended.
Open time 0-15 minutes in circumstances of +23⁰C, RH 50%.
Working time 5-15 min after application.
Drying time Tack dry approx. 3-4 h, wallpapers paintable aproxx. 12 h. Times are estimated and can vary
depending on local circumstances.
Circumstances Temperature shall be over + 15⁰C, but under + 35⁰C, relative humidity max.RH 80%.
Temperature resistance
-50⁰C - + 70⁰C. Stands frost when dry.
Transportation Keep from freezing.
Application Roller or brush.
Thinning Porous surfaces can be primed with adhesive diluted max. 30% with water. Otherwise it is not
recommended to dilute the adhesive.
Thinner Water.
Product description 6055 Fire Secure Wallpaper Adhesive. Waterborne, PVAc-dispersion adhesive
for fixing wallpapers. Colour white. Density of the product 1020 kg/m3.
Approved application On non-combustible, non-metallic substrate, maximum mass per unit area ≤ 330
g/m2.
Technical document FT Card, 6055 Fire Secure Wallpaper Adhesive data sheet, 21.5.2021.
NOTIFIED BODY 0809
Test reports EUFI29-21001995-T1, (May 18, 2021), Eurofins Expert Services Oy.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Annex 1 Part 2 and Part 5).
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Notes This certificate will not be valid if the manufacturer makes any changes or
6055 Fire Secure Wallpaper Adhesive modifications to the approved equipment, which have not been notified to, and
agreed with the notified body named on this certificate.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on Should the specified regulations or standards be amended during the validity of
this certificate, the product is to be reapproved prior to it being placed on board
materials with low flame-spread characteristics and not vessels to which the amended regulations or standards apply.
producing excessive quantities of smoke and toxic products The Mark of Conformity may only be affixed to the above type approved
or not giving rise to toxic hazards at elevated temperatures equipment and a Manufacturer’s Declaration of Conformity issued when the
production-control phase module (D, E or F) of Annex B of the Directive is fully
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to complied with and controlled by a written inspection agreement with a notified
body.
surface materials with low flame-spread characteristics. END OF CERTIFICATE
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the
"Agreement between the European Community and the United States of America on Mutual Recognition of
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
No.1/2018 signed February 18th 2019.
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
18 19
FTFTCard
Card DATA
DATA
SHEET
SHEET DATA
DATA
SHEET
SHEET
6009hs
6009hsTetrakem
TetrakemSatin
SatinFSFSAntimicrobial
Antimicrobial 6009hs
6009hsTetrakem
TetrakemSatin
SatinFSFSAntimicrobial
Antimicrobial
Product
Product FlatFlat
waterborne
waterborne
antimicrobial
antimicrobial
acrylate
acrylate
dispersion
dispersion
paint
paint
withwith
IMOIMO
firefire
classification.
classification.
A base
A base
white
white
paint
paint
andand
C base
C base
milky
milky
as fluid,
as fluid,
clear
clear
paint
paint
after
after
drying.
drying.
Suitability
Suitability Wear-resistant
Wear-resistant
andand
washable
washable
topcoat
topcoat
for for
indoor
indoor
walls.
walls.
Suitable
Suitable
for for
concrete,
concrete,
plaster
plaster
andand
fillerfiller
surfaces,
surfaces,
along
along
withwith
different
different
kinds
kinds
of wood,
of wood,
chip,
chip,
plywood
plywood
andand
mineral
mineral
boards,
boards,
plasterboards,
plasterboards,
fibreglass
fibreglass
wallpapers
wallpapers
for for
painting
painting
as well
as well
as previously
as previously
painted
painted
ceilings
ceilings
andand
indoor
indoor
walls
walls
in areas
in areas
thatthat
areare
exposed
exposed
to moderate
to moderate
wear
wear
or require
or require
goodgood
hygienic
hygienic
properties
properties
as well
as well
as aasflat
a flat
gloss
gloss
level.
level.
Certificate
Certificate Certificate
Certificate
NO NO
VTT-C-11764-15-16
VTT-C-11764-15-16
Standards
Standards ISOISO
22196:2011
22196:2011
Properties
Properties Properties
Properties
of 6009hs
of 6009hs
Tetrakem
Tetrakem
Satin
Satin
FS Special
FS Special
Antimicrobial:
Antimicrobial:
• IMO
• IMO
(MED
(MED
Marine
Marine
Equipment
Equipment
Directive)
Directive)
• Antimicrobial
• Antimicrobial
wallwall
paint
paint
• Moderately
• Moderately
wear-resistant
wear-resistant
• Can
• Can
be tinted
be tinted
using
using
well-known
well-known
tinting
tinting
systems
systems
• Washable
• Washable
• Flat
• Flat
topcoat
topcoat
for for
indoor
indoor
useuse
• Manufactured
• Manufactured
in Finland
in Finland
Technical
Technical
data
data Directions
Directions
forfor
useuse
DryDry
matter
matter
content
content App.
App.
55 %
55by
% weight
by weight
Application
Application
conditions
conditions
Density
Density 1.351.35
g/ml
g/ml
Temperatures
Temperatures
should
should
be over
be over
+5 ⁰C,
+5 ⁰C,
butbut
under
under
+ 25+ ⁰C,
25 ⁰C,
air humidity
air humidity
below
below
80 %.
80 %.
Gloss
Gloss
group
group RT6,RT6,
flatflat
Painting
Painting
instructions
instructionsRemove
Remove
dirtdirt
andand
dustdust
fromfrom
thethe
surface
surface
to be
to painted.
be painted.
If required,
If required,
clean
clean
thethe
surface
surface
withwith
Maalarin
Maalarin
tehopesu.
tehopesu.
MTMT
group
group MT314
MT314
Fill Fill
holesholes
andand
cracks
cracks
withwith
a suitable
a suitable
ready-to-use
ready-to-use
fillerfiller
or 1027
or 1027
Tetrakem
Tetrakem
FireFire
Secure
Secure
mastic
mastic
adhesive
adhesive
before
before
Wear
Wear
resistance
resistance SFS3455.
SFS3455.
SFS-EN
SFS-EN
13300
13300
Class
Class
I, ISO
I, ISO
11998.
11998.
painting.
painting.
Apply
Apply
1–21–2
times
times
as required,
as required,
withwith
either
either
a roller,
a roller,
paintbrush
paintbrush
or spray
or spray
gun.gun.
UseUse
appropriate
appropriate
protec-
protec-
Tinting
Tinting A and
A and
C bases
C bases
cancan
be tinted.
be tinted.
tivetive
geargear
andand
protective
protective
clothing
clothing
during
during
thethe
painting
painting
job.job.
Storage
Storage 36 months
36 months
in the
in the
original
original
package,
package,
store
store
in aindry
a dry
andand
coolcool
place,
place,
Liability
Liability
clause
clause TheThe
information
information
on the
on the
FT card
FT card
is based
is based
on laboratory
on laboratory
tests
tests
andand
practical
practical
results.
results.
All test
All test
results
results
areare
indica-
indica-
withwith
temperatures
temperatures
of +5
of to
+5+25
to +25
°C. °C.
tive.tive.
As we
As we
cannot
cannot
influence
influence
thethe
application
application
conditions
conditions
andand
working
working
method,
method,
we we
are are
onlyonly
responsible
responsible
for for
thethe
Coverage
Coverage Previously
Previously
painted
painted
surfaces
surfaces
8–12
8–12
m2/l
m2/l
quality
quality
of the
of the
paint,
paint,
which
which
we we
guarantee
guarantee
is inisaccordance
in accordance
withwith
highhigh
quality
quality
requirements
requirements
andand
thethe
certificate.
certificate.
Wood
Wood
andand
building
building
board
board
surfaces
surfaces
6–10 m2/lm2/l
6–10
WeWe
are are
notnot
liable
liable
for for
anyany
damages
damages
caused
caused
by the
by the
incorrect
incorrect
useuse
of the
of the
product
product
against
against
thethe
directions
directions
for for
use,use,
Concrete,
Concrete,
plaster
plaster
andand
fillerfiller
surfaces
surfaces
5–75–7
m2/lm2/l
or iforused
if used
for for
an inappropriate
an inappropriate
purpose.
purpose.
Fibreglass
Fibreglass
wallpaper,
wallpaper,
wallpapers
wallpapers
for for
painting
painting m2/lm2/l
5–75–7
Environmental
Environmental
protection
protection
DryDry
time
time A painted
A painted
surface
surface
is dry
is dry
to the
to the
touch
touch
after
after
30 min
30 min
andand
cancan
be recoated
be recoated
after
after
2 h.2Drying
h. Drying
times
times
AnyAny
unused
unused
liquid
liquid
paint
paint
should
should
be delivered
be delivered
to atocollection
a collection
point
point
for for
dangerous
dangerous
waste.
waste.
Empty,
Empty,
drydry
paint
paint
are are
indicative
indicative
andand
theythey
depend
depend
on temperature,
on temperature,
relative
relative
air humidity
air humidity
andand
ventilation.
ventilation.
vessels
vessels
cancan
be delivered
be delivered
to atorecycling
a recycling
depot
depot
or, ifor,this
if this
possibility
possibility
is not
is not
available,
available,
to atolandfill.
a landfill.
Tools
Tools Spray
Spray
gun,gun,
roller
roller
or paintbrush
or paintbrush
Application
Application
safety
safety TheThe
composition
composition
of the
of the
product
product
does
does
notnot
require
require
anyany
safety
safety
labelling.
labelling.
There
There
is aisseparate
a separate
safety
safety
datadata
sheet
sheet
Thinning
Thinning Water
Water
available
available
for for
thethe
product.
product.
Cleaning
Cleaning
of tools
of tools Water
Water
Flammability
Flammability Non-combustible.
Non-combustible.
Package
Package
sizes
sizes A bases
A bases
2.7 2.7
l, 9 l,l and
9 l and
18 l,18C l,bases
C bases
2.7 2.7
andand
9 l tin
9 l can
tin can
Transport
Transport No No
VAKVAK
classification
classification
EU EU
VOCVOC
limit
limit
value
value Cat.Cat.
A/dA/d
30 g/l
30 g/l
(2010),
(2010),
thethe
ready-to
ready-to
useuse
product’s
product’s
VOCVOC
max.
max.
30 g/l
30 g/l
20 21
CERTIFICATE NO EUFI29-21002804-MED 1 (2) CERTIFICATE NO EUFI29-21002804-MED 2 (2)
Technical document FT Card, 6009 Tetrakem Satin FS Antimicrobial data sheet, 22.2.2017.
NOTIFIED BODY 0809
Test reports Test Report VTT-S-04344-16, 14 October 2016, VTT Expert Services Ltd.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Annex 1 Part 2 and Part 5).
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Notes This certificate replaces the previous EC Type-Examination Certificates (B-
6009 Tetrakem Satin FS Antimicrobial module) VTT-C-11764-15-16.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5 This certificate will not be valid if the manufacturer makes any changes or
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on modifications to the approved equipment, which have not been notified to, and
agreed with the notified body named on this certificate.
materials with low flame-spread characteristics and not
Should the specified regulations or standards be amended during the validity of
producing excessive quantities of smoke and toxic products this certificate, the product is to be reapproved prior to it being placed on board
or not giving rise to toxic hazards at elevated temperatures vessels to which the amended regulations or standards apply.
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to The Mark of Conformity may only be affixed to the above type approved
equipment and a Manufacturer’s Declaration of Conformity issued when the
production-control phase module (D, E or F) of Annex B of the Directive is fully
surface materials with low flame-spread characteristics.
complied with and controlled by a written inspection agreement with a notified
body.
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the END OF CERTIFICATE
"Agreement between the European Community and the United States of America on Mutual Recognition of
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
No.1/2018 signed February 18th 2019.
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
22 23
FT Card DATA SHEET DATA SHEET
Technical data
Dry matter content App. 58 %
Density 1.40 g/ml
Directions for use
Gloss group RT6, flat Application conditions
MT group 2012 MT211, 311 and 2001 MT 30
Temperatures should be over +5 ⁰C, but under + 25 ⁰C, air humidity below 80 %.
Wear resistance Fair, withstands over 2,000 scrubbings. SFS3455.
Painting instructions Remove dirt and dust from the surface to be painted. If required, clean the surface with Maalarin tehopesu.
Tinting Using common indoor paint colour charts. The AP base paint can be tinted in light shades.
Fill holes and cracks with a suitable ready-to-use filler or 1027 Tetrakem Fire Secure mastic adhesive before
Storage 36 months in the original package, store in a dry and cool place,
painting. Apply 1–2 times as required, with either a roller, paintbrush or spray gun. Use appropriate protec-
with temperatures of +5 to +25 °C.
tive gear and protective clothing during the painting job.
Coverage Previously painted surfaces 8–12 m2/l
Liability clause The information on the FT card is based on laboratory tests and practical results. All test results are indica-
Wood and building board surfaces 6–10 m2/l
tive. As we cannot influence the application conditions and working method, we are only responsible for the
Concrete, plaster and filler surfaces 5–7 m2/l
quality of the paint, which we guarantee is in accordance with high quality requirements and the certificate.
Fibreglass wallpaper, wallpapers for painting 5–7 m2/l
We are not liable for any damages caused by the incorrect use of the product against the directions for use,
Dry time A painted surface is dry to the touch after 30 min and can be recoated after 1–2 h. Drying times
or if used for an inappropriate purpose.
are indicative and they depend on temperature, relative air humidity and ventilation.
Environmental protection
Tools Spray gun, roller or paintbrush
Any unused liquid paint should be delivered to a collection point for dangerous waste. Empty, dry paint
Thinning Water
vessels can be delivered to a recycling depot or, if this possibility is not available, to a landfill.
Cleaning of tools Water
Application safety The composition of the product does not require any safety labelling. There is a separate safety data sheet
Package sizes A bases 2.7 l, 9 l and 18 l, C bases 2.7 and 9 l tin can
available for the product.
Transport No VAK classification
Flammability Non-combustible.
EU VOC limit value Cat. A/d 30 g/l (2010), the ready-to use product’s VOC max. 30 g/l
24 25
CERTIFICATE NO EUFI29-21002805-MED 1 (2) CERTIFICATE NO EUFI29-21002805-MED 2 (2)
Product description 6011 Tetrakem FS Ceiling Plus, full-matt waterborne acrylate dispersion paint.
All colours.
Technical document FT Card, 6011 Tetrakem FS Ceiling Plus data sheet, 22.2.2017.
NOTIFIED BODY 0809
Test reports Test Report VTT-S-04344-16, 14 October 2016, VTT Expert Services Ltd.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Annex 1 Part 2 and Part 5).
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Notes This certificate replaces the previous EC Type-Examination Certificates (B-
6011 Tetrakem FS Ceiling Plus module) VTT-C-11764-15-16.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5 This certificate will not be valid if the manufacturer makes any changes or
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on modifications to the approved equipment, which have not been notified to, and
agreed with the notified body named on this certificate.
materials with low flame-spread characteristics and not
Should the specified regulations or standards be amended during the validity of
producing excessive quantities of smoke and toxic products this certificate, the product is to be reapproved prior to it being placed on board
or not giving rise to toxic hazards at elevated temperatures vessels to which the amended regulations or standards apply.
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to The Mark of Conformity may only be affixed to the above type approved
equipment and a Manufacturer’s Declaration of Conformity issued when the
production-control phase module (D, E or F) of Annex B of the Directive is fully
surface materials with low flame-spread characteristics.
complied with and controlled by a written inspection agreement with a notified
body.
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the END OF CERTIFICATE
"Agreement between the European Community and the United States of America on Mutual Recognition of
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
No.1/2018 signed February 18th 2019.
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
26 27
FT Card DATA SHEET DATA SHEET
28 29
CERTIFICATE NO EUFI29-21002806-MED 1 (2) CERTIFICATE NO EUFI29-21002806-MED 2 (2)
EC TYPE-EXAMINATION CERTIFICATE
Manufacturer Fintex-Tetrakem Oy
Mäkirinteentie 13
FI-36220 Kangasala
according to Marine Equipment Directive (Module B)
Regulation Item MED 1/3.18b surface materials with low flame-spread characteristics, paints.
Technical document FT Card, 6025 Tetrakem KSM25 FS Special Antimicrobial data sheet, 22.2.2017.
NOTIFIED BODY 0809
Test reports Test Report VTT-S-04344-16, 14 October 2016, VTT Expert Services Ltd.
This is to certify that Eurofins Expert Services Ltd did undertake the relevant type approval procedures for
Test methods IMO 2010 FTP Code Annex 1 Part 2 and Part 5 (IMO Resolution MSC.307(88)
the type of equipment identified below which was found to be in compliance with the requirements of Marine
Annex 1 Part 2 and Part 5).
Equipment Directive (MED) 2014/90/EU and Commission implementing regulation (EU) 2020/1170 subject to
any conditions in the schedule attached hereto.
Notes This certificate replaces the previous EC Type-Examination Certificates (B-
6025 Tetrakem KSM25 FS Special Antimicrobial module) VTT-C-11764-15-16.
meet the requirements imposed in IMO 2010 FTP Code, Annex 1 Part 2 and Part 5 This certificate will not be valid if the manufacturer makes any changes or
(IMO Resolution MSC.307(88) Annex 1 Part 2 and Part 5) on modifications to the approved equipment, which have not been notified to, and
agreed with the notified body named on this certificate.
materials with low flame-spread characteristics and not
Should the specified regulations or standards be amended during the validity of
producing excessive quantities of smoke and toxic products this certificate, the product is to be reapproved prior to it being placed on board
or not giving rise to toxic hazards at elevated temperatures vessels to which the amended regulations or standards apply.
and the provisions of Marine Equipment Directive 2014/90/EU, that apply to The Mark of Conformity may only be affixed to the above type approved
equipment and a Manufacturer’s Declaration of Conformity issued when the
production-control phase module (D, E or F) of Annex B of the Directive is fully
surface materials with low flame-spread characteristics. complied with and controlled by a written inspection agreement with a notified
body.
These products have been assigned a U.S. Coast Guard Module B number (164.112 / EC0809) to note type
approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the END OF CERTIFICATE
"Agreement between the European Community and the United States of America on Mutual Recognition of
Certificates of Conformity for Marine Equipment" signed February 27th, 2004 and amended by Decision
No.1/2018 signed February 18th 2019.
Fintex-Tetrakem Oy
The Certificate is valid until May 24, 2026 unless suspended, expired or withdrawn, provided the conditions
in this certificate are complied with and the equipment remains satisfactory in service.
30 31
CERTIFICATE NO EUFI29-21002792-MED 1 (2) CERTIFICATE NO EUFI29-21002792-MED 2 (2)
Manufacturer Fintex-Tetrakem Oy
Mäkirinteentie 13
FI-36220 Kangasala
QUALITY-SYSTEM APPROVAL Finland
according to Marine Equipment Directive Regulation Item MED /3.18b, surface materials with low flame-spread characteristics, paint
systems.
MED /3.18e, surface materials with low flame-spread characteristics, adhesives
used in the construction of ‘A’, ‘B’ and ‘C’ divisions.
The manufacturer is allowed to affix the U.S. Coast Guard approval number (according to this certificate) as
Quality-system assessment reports
allowed by the "Agreement between the European Community and the United States of America on Mutual
Recognition of Certificates of Conformity for Marine Equipment" signed February 27, 2004 and amended by Remote audit of the plant on May 4, 2021. Inspection report of Eurofins Expert
Decision No.1/2018 signed February 18th 2019. Services Ltd. No. EUFI29-210000555-I2, dated May 7, 2021.
The certificate was issued on May 24, 2021 Conditions The manufacturer must fulfil the obligations arising out of the approved quality
system.
The Certificate is valid until May 24, 2024 unless cancelled or revoked. The manufacturer must keep the notified body informed of any updating of the
quality system.
Espoo Month 24, 2021
This approval is subject to an annual renewal audit
This document is electronically approved
Notes This certificate authorizes the manufacturer or his authorized representative
established within the Community in conjunction with the EC Type Examination
(Module B) Certificate of the equipment listed in the appendix of this certificate
to affix the “Mark of Conformity” (wheelmark).
Tiina Ala-Outinen Heli Välimäki This certificate loses its validity if the manufacturer makes any changes or
Manager, Building Structures Senior Expert modifications to the approved quality system, which have not been notified to,
and agreed with the notified body named in this certificate and after lapse of time,
withdrawal or revocation of the EC Type Examination (Module B) Certificate.
32 33
34 35
Craftsmanship you can rely on!
36 37
FINTEX-TETRAKEM OY
Mäkirinteentie 13, 36220 Kangasala • FINLAND
Tel. +358 20 785 1210 • www.fintex.fi