Professional Documents
Culture Documents
RWB-80012-90 - 6°
RWB-80012-90 - 6°
5 dBd
-170 -10
radome. 160 20
150 30
140 40
130 50
120 60
110 70
Mounting & Downtilting: 100 90 80
-160 -20
-170 -10
170 10
Amphenol Antel’s
Frequency Range 806-900 MHz 160 20
Exclusive 3T (True
Impedance 50Ω 150 30
Transmission Line
140 40
3) Technology)
Connector NE, E-DIN 130 50
120
110 70
60 Antenna Design:
1) 100 90 80
VSWR ≤1.4:1
Vertical • A 1¼” four-channel extrusion running the
Polarization Vertical entire length of the antenna for
unmatched strength and rigidity.
1)
Gain 12.5 dBd • Durable brass feedline design that
2) Radiation patterns for all antennas eliminates the need for conventional
Power Rating 500 W solder joints in the signal path.
1)
are measured with the antenna • A non-collinear system with access to
Half Power Angle mounted on a fiberglass pole. every radiating element for broad band
H-Plane 90° width and superior performance.
Mounting on a metal pole will • Air as insulation for virtually no internal
E-Plane 14° signal loss.
typically improve the Front-to-
1)
Electrical Downtilt 6° Back Ratio. Every Amphenol Antel antenna is under a five-
1) year limited warranty for repair or replacement.
Null Fill 5%
Lightning Protection Direct Ground Antenna available with bottom-fed
connector. Contact your Amphenol
Antel representative or our company
headquarters for the availability of a
center-fed connector.
1)
Typical Values
2)
Power Rating limited by connector only.
3)
NE indicates an elongated N Connector.
E-DIN indicates an elongated DIN Connector.
4)
The antenna weight listed above does not include the
bracket weight.
Improvements to mechanical and/or electrical performance of the
antenna may be made without notice. 806-900 MHz
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Revision Date: 6/3/04
Fax. (815) 399-0156 Email: antel@antelinc.com www.antelinc.com