Standard Cable Tray System, Fittings and Accessories
Cable Tray Types:-
:- Ladder type
:- Perforated type
Solid Bottom Cable Tray
:- (Solic Structure (Flat) type)
:- Trough Cable Tray
:- Channel Cable Tray (Small Size Tray)
:- Wire Mesh Cable Tray
:- Single Rail Cable Tray
Cable Tray System Page 1 of 8
Standard Cable Tray System, Fittings and Accessories Material of Tray:- :- Galvanized Iron (Pre GI and Hot-Dip GI) :- Stainless Steel (SS304 / SS316) :- Aluminnium :- Fiber Reinforced Plastic (FRP) :- Glass Reinforced Plastic (GRP)
Standard Cable Tray Finish:-
:- Hot DIP Galvanized - Galvanizing Qty. as per IS:4759 and IS:2629 :- Electroplated - 15 micron Avg. :- Powder Coated - 50-80 microns Avg. :- Epoxy Coated - 50-80 microns Avg. :- Enamel Paint / Aluminium Paint :- Caustic Soda Wah (For Alu. tray)
Standard width of Cable Tray (W):-
:- 50 mm , 100 mm :- 150 mm , 300 mm :- 450 mm , 600 mm :- 750 mm , 900 mm :- 1000 mm , 1200 mm :- 1500 mm , Non-Standard available:- :- 200 mm :- 400 mm
Standard Side/Flange Height (H):-
:- 25 mm , 50 mm :- 75 mm , 100 mm :- 125 mm , 150 mm
Standard Collar size of Cable Tray (C):-
:- 5 mm , 10 mm :- 15 mm , 20 mm
Standard Cable Tray Thickness (t):-
:- 1.6 mm , 2.0 mm (For GI, SS, Alu. etc.) :- 2.5 mm , 3.0 mm :- 4.0 mm , 5.0 mm (For FRP/GRP etc.)
Cable Tray System Page 2 of 8
Standard Cable Tray System, Fittings and Accessories Standard Bending Radius for Bend / Tee:- :- 150mm , 750mm :- 300mm , 900mm :- 450mm , 1000mm :- 600mm , 1200mm Type of Side/Flange Height:- :- Straight
:- Return Flange Inside
:- Return Flange Outside
:- C-type Inside
:- C-type Outside
Cable Tray System Page 3 of 8
Standard Cable Tray System, Fittings and Accessories Type of Cable Tray Cover:- :- Cover Plate