Manufactured and designed by
Pariner for iwa i
Energy Technology and Control Ltd.
Located at |
Sussex, United Kingdom |
FUNCTIONAL SAFETY CERTIFICATE
Kiwa Gastec Certification hereby declares that the |
Integrated Burner Controller, series
ETC60xx
and the associated components as detailed in the appendices to this certificate are
suitable for inclusion in a $.LL.3 loop.
The compliance is based on an evaluation to EN 61508 (2001).
Report number 1128836
‘The systems and their associated components only comply with the above listed
safoty requirements if the specifications and instructions as detailed in the
commissioning manual are met.
‘The FTC60xx series Integrated Burner Controller provides fully integrated
bumer control systems for industrial burners, providing a PID function to control
the pressure /temperature of the boiler by modulating the fire rate, full burner
‘management functions including flame/air pressure monitoring and a fuel shut-
off valve control. They can be complemented with various boiler sensors, servo
motors, display boards, oxygen probe interface and daughter boards.
‘Where a safety limit function or gas valve proving function is mandatory for the
application, the system shall be included with respectively an ETC fail safe
temperature sensor or pressure sensor.
Gastec
‘Kiwa Gastee Certification
Wilmersdort 50
P.O. Box 157
7300 AC APELDOORN
‘The Netherlands
Tel 631 $5 5393355
srw thiwa.com
-Eivision Director.
ee:
kiwa [sed
. Partner for progress
0063
Pago 1 of 4
‘Appendix no. 1
Dated: December 2008
Examination report(s):
123836 dated November 2008
FUNCTIONAL SAFETY CERTIFICATE: E 1855 FS1 to FS4
Integrated Burner Controller, series ETCBOxx.
List ofall avaiable tyees:
firing algorithm when fr agen. | Oi.
‘As &TC6000 but operates as a single fuel Gas unit oniy.
| As ETC000 but operates as silo fuel Ol union.
Basic specification control.
‘As ETC6010 bul operates asa staged fring algorthm when fring on Ol.
‘As ETC5010 bul operates as a sinde fuel Gas unit on
‘As ETC6010 but operates_as a since fuel Oil unit only.
List of approved combinations:
Model: ‘Characteristics:
ETC1021 Gas Pressure Sensor 600mBar_
ETC1030__| Steam Pressure Sensor 25Bar
. [eretoa4 Pressure Sensor (Gas or Sleam) “Bar =
ETCto40 Boiler Temperature Sensor 0= 150
‘Temperature Sensor 0 — 400C
"Daughter Board (comms only)
ETC6051 Daughter Board (comms + 4-20mA)
"ETCe052 Daughter Beard Comma? {verter interface)
£T08087 | Daughter Board (comms + one VSO + one VG channel) =
ETC6058 | Daughter Board (Qual Scanner + comms + 4-20mA) —_
ETC6059 Daher Boacs (Dual Sanne + comm + inveterate]
erco0e0 isplay Unit12 key (Basic Function}
TCB06 | Display Unit12 key (Including Relays @ RTC)
ET C6070 ‘Display Unit9 key (Basic Function)
‘ETC6071___| Display Unit.9 key (Including Relays & RTC)
ETCO7S 410.4" Touch Screen Display
‘ETC8O76 5.7” Touch Soreen Distiay
ETC8080 | Oxyaen Probe In ——
ETC6086 “Temp Sensor06222
Ce
0063
Number E 1855
Gastec Certification B.V., hereby declares
that the Integrated Burner Controller,
series ETC60xx
designed and
made by Energy Technology and Control Ltd.
in Sussex, United Kingdom
complies with the essential requirements of the
Gas Appliances Directive (90/396/EEC).
The compliance is based on examination to:
EN 298 (September 2003)
EN 12067-2 (March 2004)
EN 1643 (October 2000)
PIN :0063BR1587
Report number 7 see appendix to certificate
The products have been approved for all EU and EFTA
countries.
A description of the specific types is given in the appendix
to this certificate.
a "SastTec
Apeldoorn, 27 Jul *
pekioom, 27 sue Certification
sot w
Ir. yr. van Rij,
Director.
a
NN
eas
wat
ALVOlseILYAOFile Issue: 004 HEADING SHEETS ne tee
a.
Report Number: 122587/1 Automatic burner control systems ago: HS 200
Responsible Test House: GASTEC Certfication BV
Address: Wilmersdorf 50
7327 AC Apeldoorn
P.O. Box 137
7300 AC Apeldoorn
‘The Netheriands
Telephone: +31 555 393 393
Facsimile: +31 555 393 3901676
Name of the Applicant: Energy Technology and Control Ltd.
Address: 25 North Street
BN7 2PE, Lewes East Sussex
United Kingdom
Name of the Manufacturer: Energy Technology and Control Ltd.
Address: 25 North Street
BN7 2PE, Lewes East Sussex
United Kingdom
Test report of the examination of the modification and or extension to the:
‘Automatic burner control systems
Series ETC60xx and ETC61xx
Tested and examined to:
EN 298 ‘Automatic gas burner control systems for gas burers and gas burning appliances with or
without fans (September 2003)
EN 12067-2 _Gas/air ratio contro's for gas burners and gas buming appliances, part 2: Electronic types
(March 2004),
EN 1643 Valve proving systems for automatic shut-off valves for gas bumers and gas appliances
(October 2000).
EN 230 Automatic burner control systems for oll burners (June 2006).
EN 298 ‘Automatic gas burner control systems for gas burners and gas burning appliances with or
without fans (September 2003),
This report should be used in conjunction with report(s) no: 122587
Te tenn tor mesa fists. Partner for progress
0063
Page 2 of 12
EC TYPE-EXAMINATION CERTIFICATE: E 1855
Appendix no. 4
Dated: July 2007
P.LIN.: O063BR1887
Examination report(s):
122587/1 dated July 2007
‘This appendix supersedes appendix no. 1 dated July 2006.
Integrated Burner Controller, series ETC60xx (PLN. 00638R1587).
aileble
Model: ‘Characteristics: -
ETC6000 Standard control,
ETC6002 ‘As ETC6000 but operates as a staged firing algorithm when firing on Oil
ETC6003 ‘As ETC6000 but operates as.a singe fuel Gas unit only.
ETC6004 ‘As ETC6000 but ozerates as a sins fuel Oil unit oni
ETC6006 Basi specification contro.
ETC6010 Standard contro,
ETC6012 ‘As ETGB010 but operates as
ETC6013
[ETC6o14 but operates as a single fuel Oil unt only
List of approved combinations:
Model ‘Characteristics:
eTC1021 Gas Pressure Sensor 600mBar a
a ETC1030 ‘Steam Pressure Sensor 25Bar
ETC1034 Pressure Sensor (Gas or Steam) 48a
ETC1040 Boller Temperature Sensor 0 ~ 150°C
ETCt0da Boller Temperature Sensor 0 ~ 400
ETC2012 Oxygen Probe -
‘Servo Interface
Servo 4Nm
—PServe AEN
‘Servo 20Nm
‘Servo 40Nm
027 | Servo 10Nm
ETC0028 ‘Servo 20Nm = =
ETC6032 ‘Servo 20Nm
ETC6033 ‘Servo 50Nm
ETC6040 ‘Servo Stepper 1.5Nm
[eTC6050 ‘Daughter Board (comms only)
[eTC6051 Daughter Board (comms + 4-20mA)
[Erce9s2 Daughter Board (comms + inverter interface)
ETC6057 ‘Daughter Board (comms + one VSD + one {iO channel)
ETC6058 Daushiter Board (Dual Sean 4-20mA
ETC6059 Daughter Board (Dual Scanner + comms + inverter interface)
| eTC6060 Display Uni 12 key (Basic Function)
ETC6061 | Display Unit, 12 key
765002 | Display Unit 12 key incusina Relays. RTC, Data Loosing)
|[erc6070 Display Unit key (Basic Function)
‘C6071 | Display Unit.9 key (Including Relays & RTC)
ETC6072 Display Unit @ key (Including Relays, RTC, Data Logging)
[eTceo7s Touch Screen Display
ETC6076 "Touch Screen Display —s:
LETCB080 Oxsen Probe interface:
. ETC6OBE Temp J06223
Number E 1855 ( €
0063
Gastec Certification B.V., hereby declares
that the Fuel Air Ratio Control,
series ETC61xx
designed and
made by Energy Technology and Control Ltd.
in Sussex, United Kingdom
complies with the essential requirements of the
Gas Appliances Directive (90/396/EEC).
The compliance is based on examination to:
EN 12067-2 (March 2004)
PIN :0063BR1587
Report number : $6e appendix to certificate
The products have been approved for all EU and EFTA
countries.
A description of the specific types is given in the appendix
to this certificate.
Apeldoom, 27 July 2
TSastTec
i
Ir. MJa0. van Rij,
Director. "aan
mat
JALVOIsILYSAOTOV Rheinland
Immissionsschutz und Energiesysteme GmbH
A TUVRheinland®
Genau. Richtig.
Prafstelle far energietechnische Einrichtungen
Typpriifung nach TRD 411:02.97 und TRD 412:06.98 an
GAS-/OL-Brennersteuerung mit Brennstoff-Luft-
Verbundregelung und Dichtheitskontrollsystem
Hersteller / Auftraggeber:
Produkt:
Typbezeichnung,
Technische Daten:
Geraitebeschreibung:
Prifaniass:
Priffergebnis
Bemerkung:
KOln, 30.07.2007
432/schu
Bearbeiter
(futh
Dip|4ng. O. Schulte
Auttrag Ne-21207786
Energy Technology and Control LTD
25 North Street
Lewes, East Sussex BN7 2PE (UK)
Kombinierte Gas-/Olfeuerungssteuerung mit Luftverbund-
regelung
System: ETC 60xx
ETC 61xx
siehe unter 2,
‘System
ETC 60xx
Die Gerdte werden zur fehlersicheren Steuerung von Ol-
und Gasbrennemn eingesetzt und erméglichen eine siche-
re Brennstoff-Luft-Verbundsteuerung sowie Dichtheitskon-
trolle der Absperreinrichtungen
ETC 61xx:
Das Gerét ist zur sicheren Steuerung des Brennstoff-Luft-
Verhaittnisses vorgesehen und bildet eine Teilmenge der
vorgenannten Gerate.
Der Prifling hailt die Anforderungen der oben genannten
Prufrichtlinien/Normen ein
Prifstelle for
energietechnische Einrichtungen
DIN- und DVGW-Prifstelle
Stlv. Leiter der Prafstelle
| Px
Dipl ot dee Ruckwart
Seite 214 Bericht Nr. $282 2007 T1